linux/drivers/s390/block/dasd_eer.c
Stefan Weinhuber 046f3e821f [S390] dasd: Use default recovery for SNSS requests
For extended error reporting we sometimes have to start an
Sense Subsystem Status request (SNSS). When this request needs
to be recovered for some reason, the recovery request will
fail with 'command reject'.
Our usual recovery procedure will retry the failed request by
creating a new request and chaining the failed request from that
one. SNSS requests, though, must not be chained from anything,
so the recovery request will fail permanently.
Use the default recovery for SNSS request, which will just restart
the original request without further ado.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-03-05 23:35:52 +01:00

696 lines
20 KiB
C

/*
* Character device driver for extended error reporting.
*
* Copyright (C) 2005 IBM Corporation
* extended error reporting for DASD ECKD devices
* Author(s): Stefan Weinhuber <wein@de.ibm.com>
*/
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/poll.h>
#include <asm/uaccess.h>
#include <asm/semaphore.h>
#include <asm/atomic.h>
#include <asm/ebcdic.h>
#include "dasd_int.h"
#include "dasd_eckd.h"
#ifdef PRINTK_HEADER
#undef PRINTK_HEADER
#endif /* PRINTK_HEADER */
#define PRINTK_HEADER "dasd(eer):"
/*
* SECTION: the internal buffer
*/
/*
* The internal buffer is meant to store obaque blobs of data, so it does
* not know of higher level concepts like triggers.
* It consists of a number of pages that are used as a ringbuffer. Each data
* blob is stored in a simple record that consists of an integer, which
* contains the size of the following data, and the data bytes themselfes.
*
* To allow for multiple independent readers we create one internal buffer
* each time the device is opened and destroy the buffer when the file is
* closed again. The number of pages used for this buffer is determined by
* the module parmeter eer_pages.
*
* One record can be written to a buffer by using the functions
* - dasd_eer_start_record (one time per record to write the size to the
* buffer and reserve the space for the data)
* - dasd_eer_write_buffer (one or more times per record to write the data)
* The data can be written in several steps but you will have to compute
* the total size up front for the invocation of dasd_eer_start_record.
* If the ringbuffer is full, dasd_eer_start_record will remove the required
* number of old records.
*
* A record is typically read in two steps, first read the integer that
* specifies the size of the following data, then read the data.
* Both can be done by
* - dasd_eer_read_buffer
*
* For all mentioned functions you need to get the bufferlock first and keep
* it until a complete record is written or read.
*
* All information necessary to keep track of an internal buffer is kept in
* a struct eerbuffer. The buffer specific to a file pointer is strored in
* the private_data field of that file. To be able to write data to all
* existing buffers, each buffer is also added to the bufferlist.
* If the user does not want to read a complete record in one go, we have to
* keep track of the rest of the record. residual stores the number of bytes
* that are still to deliver. If the rest of the record is invalidated between
* two reads then residual will be set to -1 so that the next read will fail.
* All entries in the eerbuffer structure are protected with the bufferlock.
* To avoid races between writing to a buffer on the one side and creating
* and destroying buffers on the other side, the bufferlock must also be used
* to protect the bufferlist.
*/
static int eer_pages = 5;
module_param(eer_pages, int, S_IRUGO|S_IWUSR);
struct eerbuffer {
struct list_head list;
char **buffer;
int buffersize;
int buffer_page_count;
int head;
int tail;
int residual;
};
static LIST_HEAD(bufferlist);
static DEFINE_SPINLOCK(bufferlock);
static DECLARE_WAIT_QUEUE_HEAD(dasd_eer_read_wait_queue);
/*
* How many free bytes are available on the buffer.
* Needs to be called with bufferlock held.
*/
static int dasd_eer_get_free_bytes(struct eerbuffer *eerb)
{
if (eerb->head < eerb->tail)
return eerb->tail - eerb->head - 1;
return eerb->buffersize - eerb->head + eerb->tail -1;
}
/*
* How many bytes of buffer space are used.
* Needs to be called with bufferlock held.
*/
static int dasd_eer_get_filled_bytes(struct eerbuffer *eerb)
{
if (eerb->head >= eerb->tail)
return eerb->head - eerb->tail;
return eerb->buffersize - eerb->tail + eerb->head;
}
/*
* The dasd_eer_write_buffer function just copies count bytes of data
* to the buffer. Make sure to call dasd_eer_start_record first, to
* make sure that enough free space is available.
* Needs to be called with bufferlock held.
*/
static void dasd_eer_write_buffer(struct eerbuffer *eerb,
char *data, int count)
{
unsigned long headindex,localhead;
unsigned long rest, len;
char *nextdata;
nextdata = data;
rest = count;
while (rest > 0) {
headindex = eerb->head / PAGE_SIZE;
localhead = eerb->head % PAGE_SIZE;
len = min(rest, PAGE_SIZE - localhead);
memcpy(eerb->buffer[headindex]+localhead, nextdata, len);
nextdata += len;
rest -= len;
eerb->head += len;
if (eerb->head == eerb->buffersize)
eerb->head = 0; /* wrap around */
BUG_ON(eerb->head > eerb->buffersize);
}
}
/*
* Needs to be called with bufferlock held.
*/
static int dasd_eer_read_buffer(struct eerbuffer *eerb, char *data, int count)
{
unsigned long tailindex,localtail;
unsigned long rest, len, finalcount;
char *nextdata;
finalcount = min(count, dasd_eer_get_filled_bytes(eerb));
nextdata = data;
rest = finalcount;
while (rest > 0) {
tailindex = eerb->tail / PAGE_SIZE;
localtail = eerb->tail % PAGE_SIZE;
len = min(rest, PAGE_SIZE - localtail);
memcpy(nextdata, eerb->buffer[tailindex] + localtail, len);
nextdata += len;
rest -= len;
eerb->tail += len;
if (eerb->tail == eerb->buffersize)
eerb->tail = 0; /* wrap around */
BUG_ON(eerb->tail > eerb->buffersize);
}
return finalcount;
}
/*
* Whenever you want to write a blob of data to the internal buffer you
* have to start by using this function first. It will write the number
* of bytes that will be written to the buffer. If necessary it will remove
* old records to make room for the new one.
* Needs to be called with bufferlock held.
*/
static int dasd_eer_start_record(struct eerbuffer *eerb, int count)
{
int tailcount;
if (count + sizeof(count) > eerb->buffersize)
return -ENOMEM;
while (dasd_eer_get_free_bytes(eerb) < count + sizeof(count)) {
if (eerb->residual > 0) {
eerb->tail += eerb->residual;
if (eerb->tail >= eerb->buffersize)
eerb->tail -= eerb->buffersize;
eerb->residual = -1;
}
dasd_eer_read_buffer(eerb, (char *) &tailcount,
sizeof(tailcount));
eerb->tail += tailcount;
if (eerb->tail >= eerb->buffersize)
eerb->tail -= eerb->buffersize;
}
dasd_eer_write_buffer(eerb, (char*) &count, sizeof(count));
return 0;
};
/*
* Release pages that are not used anymore.
*/
static void dasd_eer_free_buffer_pages(char **buf, int no_pages)
{
int i;
for (i = 0; i < no_pages; i++)
free_page((unsigned long) buf[i]);
}
/*
* Allocate a new set of memory pages.
*/
static int dasd_eer_allocate_buffer_pages(char **buf, int no_pages)
{
int i;
for (i = 0; i < no_pages; i++) {
buf[i] = (char *) get_zeroed_page(GFP_KERNEL);
if (!buf[i]) {
dasd_eer_free_buffer_pages(buf, i);
return -ENOMEM;
}
}
return 0;
}
/*
* SECTION: The extended error reporting functionality
*/
/*
* When a DASD device driver wants to report an error, it calls the
* function dasd_eer_write and gives the respective trigger ID as
* parameter. Currently there are four kinds of triggers:
*
* DASD_EER_FATALERROR: all kinds of unrecoverable I/O problems
* DASD_EER_PPRCSUSPEND: PPRC was suspended
* DASD_EER_NOPATH: There is no path to the device left.
* DASD_EER_STATECHANGE: The state of the device has changed.
*
* For the first three triggers all required information can be supplied by
* the caller. For these triggers a record is written by the function
* dasd_eer_write_standard_trigger.
*
* The DASD_EER_STATECHANGE trigger is special since a sense subsystem
* status ccw need to be executed to gather the necessary sense data first.
* The dasd_eer_snss function will queue the SNSS request and the request
* callback will then call dasd_eer_write with the DASD_EER_STATCHANGE
* trigger.
*
* To avoid memory allocations at runtime, the necessary memory is allocated
* when the extended error reporting is enabled for a device (by
* dasd_eer_probe). There is one sense subsystem status request for each
* eer enabled DASD device. The presence of the cqr in device->eer_cqr
* indicates that eer is enable for the device. The use of the snss request
* is protected by the DASD_FLAG_EER_IN_USE bit. When this flag indicates
* that the cqr is currently in use, dasd_eer_snss cannot start a second
* request but sets the DASD_FLAG_EER_SNSS flag instead. The callback of
* the SNSS request will check the bit and call dasd_eer_snss again.
*/
#define SNSS_DATA_SIZE 44
#define DASD_EER_BUSID_SIZE 10
struct dasd_eer_header {
__u32 total_size;
__u32 trigger;
__u64 tv_sec;
__u64 tv_usec;
char busid[DASD_EER_BUSID_SIZE];
} __attribute__ ((packed));
/*
* The following function can be used for those triggers that have
* all necessary data available when the function is called.
* If the parameter cqr is not NULL, the chain of requests will be searched
* for valid sense data, and all valid sense data sets will be added to
* the triggers data.
*/
static void dasd_eer_write_standard_trigger(struct dasd_device *device,
struct dasd_ccw_req *cqr,
int trigger)
{
struct dasd_ccw_req *temp_cqr;
int data_size;
struct timeval tv;
struct dasd_eer_header header;
unsigned long flags;
struct eerbuffer *eerb;
/* go through cqr chain and count the valid sense data sets */
data_size = 0;
for (temp_cqr = cqr; temp_cqr; temp_cqr = temp_cqr->refers)
if (temp_cqr->irb.esw.esw0.erw.cons)
data_size += 32;
header.total_size = sizeof(header) + data_size + 4; /* "EOR" */
header.trigger = trigger;
do_gettimeofday(&tv);
header.tv_sec = tv.tv_sec;
header.tv_usec = tv.tv_usec;
strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE);
spin_lock_irqsave(&bufferlock, flags);
list_for_each_entry(eerb, &bufferlist, list) {
dasd_eer_start_record(eerb, header.total_size);
dasd_eer_write_buffer(eerb, (char *) &header, sizeof(header));
for (temp_cqr = cqr; temp_cqr; temp_cqr = temp_cqr->refers)
if (temp_cqr->irb.esw.esw0.erw.cons)
dasd_eer_write_buffer(eerb, cqr->irb.ecw, 32);
dasd_eer_write_buffer(eerb, "EOR", 4);
}
spin_unlock_irqrestore(&bufferlock, flags);
wake_up_interruptible(&dasd_eer_read_wait_queue);
}
/*
* This function writes a DASD_EER_STATECHANGE trigger.
*/
static void dasd_eer_write_snss_trigger(struct dasd_device *device,
struct dasd_ccw_req *cqr,
int trigger)
{
int data_size;
int snss_rc;
struct timeval tv;
struct dasd_eer_header header;
unsigned long flags;
struct eerbuffer *eerb;
snss_rc = (cqr->status == DASD_CQR_FAILED) ? -EIO : 0;
if (snss_rc)
data_size = 0;
else
data_size = SNSS_DATA_SIZE;
header.total_size = sizeof(header) + data_size + 4; /* "EOR" */
header.trigger = DASD_EER_STATECHANGE;
do_gettimeofday(&tv);
header.tv_sec = tv.tv_sec;
header.tv_usec = tv.tv_usec;
strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE);
spin_lock_irqsave(&bufferlock, flags);
list_for_each_entry(eerb, &bufferlist, list) {
dasd_eer_start_record(eerb, header.total_size);
dasd_eer_write_buffer(eerb, (char *) &header , sizeof(header));
if (!snss_rc)
dasd_eer_write_buffer(eerb, cqr->data, SNSS_DATA_SIZE);
dasd_eer_write_buffer(eerb, "EOR", 4);
}
spin_unlock_irqrestore(&bufferlock, flags);
wake_up_interruptible(&dasd_eer_read_wait_queue);
}
/*
* This function is called for all triggers. It calls the appropriate
* function that writes the actual trigger records.
*/
void dasd_eer_write(struct dasd_device *device, struct dasd_ccw_req *cqr,
unsigned int id)
{
if (!device->eer_cqr)
return;
switch (id) {
case DASD_EER_FATALERROR:
case DASD_EER_PPRCSUSPEND:
dasd_eer_write_standard_trigger(device, cqr, id);
break;
case DASD_EER_NOPATH:
dasd_eer_write_standard_trigger(device, NULL, id);
break;
case DASD_EER_STATECHANGE:
dasd_eer_write_snss_trigger(device, cqr, id);
break;
default: /* unknown trigger, so we write it without any sense data */
dasd_eer_write_standard_trigger(device, NULL, id);
break;
}
}
EXPORT_SYMBOL(dasd_eer_write);
/*
* Start a sense subsystem status request.
* Needs to be called with the device held.
*/
void dasd_eer_snss(struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
cqr = device->eer_cqr;
if (!cqr) /* Device not eer enabled. */
return;
if (test_and_set_bit(DASD_FLAG_EER_IN_USE, &device->flags)) {
/* Sense subsystem status request in use. */
set_bit(DASD_FLAG_EER_SNSS, &device->flags);
return;
}
clear_bit(DASD_FLAG_EER_SNSS, &device->flags);
cqr->status = DASD_CQR_QUEUED;
list_add(&cqr->list, &device->ccw_queue);
dasd_schedule_bh(device);
}
/*
* Callback function for use with sense subsystem status request.
*/
static void dasd_eer_snss_cb(struct dasd_ccw_req *cqr, void *data)
{
struct dasd_device *device = cqr->device;
unsigned long flags;
dasd_eer_write(device, cqr, DASD_EER_STATECHANGE);
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
if (device->eer_cqr == cqr) {
clear_bit(DASD_FLAG_EER_IN_USE, &device->flags);
if (test_bit(DASD_FLAG_EER_SNSS, &device->flags))
/* Another SNSS has been requested in the meantime. */
dasd_eer_snss(device);
cqr = NULL;
}
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
if (cqr)
/*
* Extended error recovery has been switched off while
* the SNSS request was running. It could even have
* been switched off and on again in which case there
* is a new ccw in device->eer_cqr. Free the "old"
* snss request now.
*/
dasd_kfree_request(cqr, device);
}
/*
* Enable error reporting on a given device.
*/
int dasd_eer_enable(struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
unsigned long flags;
if (device->eer_cqr)
return 0;
if (!device->discipline || strcmp(device->discipline->name, "ECKD"))
return -EPERM; /* FIXME: -EMEDIUMTYPE ? */
cqr = dasd_kmalloc_request("ECKD", 1 /* SNSS */,
SNSS_DATA_SIZE, device);
if (!cqr)
return -ENOMEM;
cqr->device = device;
cqr->retries = 255;
cqr->expires = 10 * HZ;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
cqr->cpaddr->cmd_code = DASD_ECKD_CCW_SNSS;
cqr->cpaddr->count = SNSS_DATA_SIZE;
cqr->cpaddr->flags = 0;
cqr->cpaddr->cda = (__u32)(addr_t) cqr->data;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
cqr->callback = dasd_eer_snss_cb;
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
if (!device->eer_cqr) {
device->eer_cqr = cqr;
cqr = NULL;
}
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
if (cqr)
dasd_kfree_request(cqr, device);
return 0;
}
/*
* Disable error reporting on a given device.
*/
void dasd_eer_disable(struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
unsigned long flags;
int in_use;
if (!device->eer_cqr)
return;
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
cqr = device->eer_cqr;
device->eer_cqr = NULL;
clear_bit(DASD_FLAG_EER_SNSS, &device->flags);
in_use = test_and_clear_bit(DASD_FLAG_EER_IN_USE, &device->flags);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
if (cqr && !in_use)
dasd_kfree_request(cqr, device);
}
/*
* SECTION: the device operations
*/
/*
* On the one side we need a lock to access our internal buffer, on the
* other side a copy_to_user can sleep. So we need to copy the data we have
* to transfer in a readbuffer, which is protected by the readbuffer_mutex.
*/
static char readbuffer[PAGE_SIZE];
static DECLARE_MUTEX(readbuffer_mutex);
static int dasd_eer_open(struct inode *inp, struct file *filp)
{
struct eerbuffer *eerb;
unsigned long flags;
eerb = kzalloc(sizeof(struct eerbuffer), GFP_KERNEL);
if (!eerb)
return -ENOMEM;
eerb->buffer_page_count = eer_pages;
if (eerb->buffer_page_count < 1 ||
eerb->buffer_page_count > INT_MAX / PAGE_SIZE) {
kfree(eerb);
MESSAGE(KERN_WARNING, "can't open device since module "
"parameter eer_pages is smaller then 1 or"
" bigger then %d", (int)(INT_MAX / PAGE_SIZE));
return -EINVAL;
}
eerb->buffersize = eerb->buffer_page_count * PAGE_SIZE;
eerb->buffer = kmalloc(eerb->buffer_page_count * sizeof(char *),
GFP_KERNEL);
if (!eerb->buffer) {
kfree(eerb);
return -ENOMEM;
}
if (dasd_eer_allocate_buffer_pages(eerb->buffer,
eerb->buffer_page_count)) {
kfree(eerb->buffer);
kfree(eerb);
return -ENOMEM;
}
filp->private_data = eerb;
spin_lock_irqsave(&bufferlock, flags);
list_add(&eerb->list, &bufferlist);
spin_unlock_irqrestore(&bufferlock, flags);
return nonseekable_open(inp,filp);
}
static int dasd_eer_close(struct inode *inp, struct file *filp)
{
struct eerbuffer *eerb;
unsigned long flags;
eerb = (struct eerbuffer *) filp->private_data;
spin_lock_irqsave(&bufferlock, flags);
list_del(&eerb->list);
spin_unlock_irqrestore(&bufferlock, flags);
dasd_eer_free_buffer_pages(eerb->buffer, eerb->buffer_page_count);
kfree(eerb->buffer);
kfree(eerb);
return 0;
}
static ssize_t dasd_eer_read(struct file *filp, char __user *buf,
size_t count, loff_t *ppos)
{
int tc,rc;
int tailcount,effective_count;
unsigned long flags;
struct eerbuffer *eerb;
eerb = (struct eerbuffer *) filp->private_data;
if (down_interruptible(&readbuffer_mutex))
return -ERESTARTSYS;
spin_lock_irqsave(&bufferlock, flags);
if (eerb->residual < 0) { /* the remainder of this record */
/* has been deleted */
eerb->residual = 0;
spin_unlock_irqrestore(&bufferlock, flags);
up(&readbuffer_mutex);
return -EIO;
} else if (eerb->residual > 0) {
/* OK we still have a second half of a record to deliver */
effective_count = min(eerb->residual, (int) count);
eerb->residual -= effective_count;
} else {
tc = 0;
while (!tc) {
tc = dasd_eer_read_buffer(eerb, (char *) &tailcount,
sizeof(tailcount));
if (!tc) {
/* no data available */
spin_unlock_irqrestore(&bufferlock, flags);
up(&readbuffer_mutex);
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
rc = wait_event_interruptible(
dasd_eer_read_wait_queue,
eerb->head != eerb->tail);
if (rc)
return rc;
if (down_interruptible(&readbuffer_mutex))
return -ERESTARTSYS;
spin_lock_irqsave(&bufferlock, flags);
}
}
WARN_ON(tc != sizeof(tailcount));
effective_count = min(tailcount,(int)count);
eerb->residual = tailcount - effective_count;
}
tc = dasd_eer_read_buffer(eerb, readbuffer, effective_count);
WARN_ON(tc != effective_count);
spin_unlock_irqrestore(&bufferlock, flags);
if (copy_to_user(buf, readbuffer, effective_count)) {
up(&readbuffer_mutex);
return -EFAULT;
}
up(&readbuffer_mutex);
return effective_count;
}
static unsigned int dasd_eer_poll(struct file *filp, poll_table *ptable)
{
unsigned int mask;
unsigned long flags;
struct eerbuffer *eerb;
eerb = (struct eerbuffer *) filp->private_data;
poll_wait(filp, &dasd_eer_read_wait_queue, ptable);
spin_lock_irqsave(&bufferlock, flags);
if (eerb->head != eerb->tail)
mask = POLLIN | POLLRDNORM ;
else
mask = 0;
spin_unlock_irqrestore(&bufferlock, flags);
return mask;
}
static const struct file_operations dasd_eer_fops = {
.open = &dasd_eer_open,
.release = &dasd_eer_close,
.read = &dasd_eer_read,
.poll = &dasd_eer_poll,
.owner = THIS_MODULE,
};
static struct miscdevice *dasd_eer_dev = NULL;
int __init dasd_eer_init(void)
{
int rc;
dasd_eer_dev = kzalloc(sizeof(*dasd_eer_dev), GFP_KERNEL);
if (!dasd_eer_dev)
return -ENOMEM;
dasd_eer_dev->minor = MISC_DYNAMIC_MINOR;
dasd_eer_dev->name = "dasd_eer";
dasd_eer_dev->fops = &dasd_eer_fops;
rc = misc_register(dasd_eer_dev);
if (rc) {
kfree(dasd_eer_dev);
dasd_eer_dev = NULL;
MESSAGE(KERN_ERR, "%s", "dasd_eer_init could not "
"register misc device");
return rc;
}
return 0;
}
void dasd_eer_exit(void)
{
if (dasd_eer_dev) {
WARN_ON(misc_deregister(dasd_eer_dev) != 0);
kfree(dasd_eer_dev);
dasd_eer_dev = NULL;
}
}