forked from Minki/linux
1603b5aca4
This is a big irq cleanup patch. * Use set_irq_chip() to register irq_chip. * Initialize .mask, .unmask, .mask_ack field. Functions for these method are already exist in most case. * Do not initialize .startup, .shutdown, .enable, .disable fields if default routines provided by irq_chip_set_defaults() were suitable. * Remove redundant irq_desc initializations. * Remove unnecessary local_irq_save/local_irq_restore, spin_lock. With this cleanup, it would be easy to switch to slightly lightwait irq flow handlers (handle_level_irq(), etc.) instead of __do_IRQ(). Though whole this patch is quite large, changes in each irq_chip are not quite simple. Please review and test on your platform. Thanks. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
278 lines
6.1 KiB
C
278 lines
6.1 KiB
C
/*
|
|
* Basic EISA bus support for the SGI Indigo-2.
|
|
*
|
|
* (C) 2002 Pascal Dameme <netinet@freesurf.fr>
|
|
* and Marc Zyngier <mzyngier@freesurf.fr>
|
|
*
|
|
* This code is released under both the GPL version 2 and BSD
|
|
* licenses. Either license may be used.
|
|
*
|
|
* This code offers a very basic support for this EISA bus present in
|
|
* the SGI Indigo-2. It currently only supports PIO (forget about DMA
|
|
* for the time being). This is enough for a low-end ethernet card,
|
|
* but forget about your favorite SCSI card...
|
|
*
|
|
* TODO :
|
|
* - Fix bugs...
|
|
* - Add ISA support
|
|
* - Add DMA (yeah, right...).
|
|
* - Fix more bugs.
|
|
*/
|
|
|
|
#include <linux/eisa.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/addrspace.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/sgi/ioc.h>
|
|
#include <asm/sgi/mc.h>
|
|
#include <asm/sgi/ip22.h>
|
|
|
|
/* I2 has four EISA slots. */
|
|
#define IP22_EISA_MAX_SLOTS 4
|
|
#define EISA_MAX_IRQ 16
|
|
|
|
#define EIU_MODE_REG 0x0001ffc0
|
|
#define EIU_STAT_REG 0x0001ffc4
|
|
#define EIU_PREMPT_REG 0x0001ffc8
|
|
#define EIU_QUIET_REG 0x0001ffcc
|
|
#define EIU_INTRPT_ACK 0x00010004
|
|
|
|
static char __init *decode_eisa_sig(unsigned long addr)
|
|
{
|
|
static char sig_str[EISA_SIG_LEN];
|
|
u8 sig[4];
|
|
u16 rev;
|
|
int i;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
sig[i] = inb (addr + i);
|
|
|
|
if (!i && (sig[0] & 0x80))
|
|
return NULL;
|
|
}
|
|
|
|
sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
|
|
sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
|
|
sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
|
|
rev = (sig[2] << 8) | sig[3];
|
|
sprintf(sig_str + 3, "%04X", rev);
|
|
|
|
return sig_str;
|
|
}
|
|
|
|
static irqreturn_t ip22_eisa_intr(int irq, void *dev_id)
|
|
{
|
|
u8 eisa_irq;
|
|
u8 dma1, dma2;
|
|
|
|
eisa_irq = inb(EIU_INTRPT_ACK);
|
|
dma1 = inb(EISA_DMA1_STATUS);
|
|
dma2 = inb(EISA_DMA2_STATUS);
|
|
|
|
if (eisa_irq < EISA_MAX_IRQ) {
|
|
do_IRQ(eisa_irq);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Oops, Bad Stuff Happened... */
|
|
printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
|
|
|
|
outb(0x20, EISA_INT2_CTRL);
|
|
outb(0x20, EISA_INT1_CTRL);
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static void enable_eisa1_irq(unsigned int irq)
|
|
{
|
|
u8 mask;
|
|
|
|
mask = inb(EISA_INT1_MASK);
|
|
mask &= ~((u8) (1 << irq));
|
|
outb(mask, EISA_INT1_MASK);
|
|
}
|
|
|
|
static unsigned int startup_eisa1_irq(unsigned int irq)
|
|
{
|
|
u8 edge;
|
|
|
|
/* Only use edge interrupts for EISA */
|
|
|
|
edge = inb(EISA_INT1_EDGE_LEVEL);
|
|
edge &= ~((u8) (1 << irq));
|
|
outb(edge, EISA_INT1_EDGE_LEVEL);
|
|
|
|
enable_eisa1_irq(irq);
|
|
return 0;
|
|
}
|
|
|
|
static void disable_eisa1_irq(unsigned int irq)
|
|
{
|
|
u8 mask;
|
|
|
|
mask = inb(EISA_INT1_MASK);
|
|
mask |= ((u8) (1 << irq));
|
|
outb(mask, EISA_INT1_MASK);
|
|
}
|
|
|
|
static void mask_and_ack_eisa1_irq(unsigned int irq)
|
|
{
|
|
disable_eisa1_irq(irq);
|
|
|
|
outb(0x20, EISA_INT1_CTRL);
|
|
}
|
|
|
|
static void end_eisa1_irq(unsigned int irq)
|
|
{
|
|
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
|
|
enable_eisa1_irq(irq);
|
|
}
|
|
|
|
static struct irq_chip ip22_eisa1_irq_type = {
|
|
.typename = "IP22 EISA",
|
|
.startup = startup_eisa1_irq,
|
|
.ack = mask_and_ack_eisa1_irq,
|
|
.mask = disable_eisa1_irq,
|
|
.mask_ack = mask_and_ack_eisa1_irq,
|
|
.unmask = enable_eisa1_irq,
|
|
.end = end_eisa1_irq,
|
|
};
|
|
|
|
static void enable_eisa2_irq(unsigned int irq)
|
|
{
|
|
u8 mask;
|
|
|
|
mask = inb(EISA_INT2_MASK);
|
|
mask &= ~((u8) (1 << (irq - 8)));
|
|
outb(mask, EISA_INT2_MASK);
|
|
}
|
|
|
|
static unsigned int startup_eisa2_irq(unsigned int irq)
|
|
{
|
|
u8 edge;
|
|
|
|
/* Only use edge interrupts for EISA */
|
|
|
|
edge = inb(EISA_INT2_EDGE_LEVEL);
|
|
edge &= ~((u8) (1 << (irq - 8)));
|
|
outb(edge, EISA_INT2_EDGE_LEVEL);
|
|
|
|
enable_eisa2_irq(irq);
|
|
return 0;
|
|
}
|
|
|
|
static void disable_eisa2_irq(unsigned int irq)
|
|
{
|
|
u8 mask;
|
|
|
|
mask = inb(EISA_INT2_MASK);
|
|
mask |= ((u8) (1 << (irq - 8)));
|
|
outb(mask, EISA_INT2_MASK);
|
|
}
|
|
|
|
static void mask_and_ack_eisa2_irq(unsigned int irq)
|
|
{
|
|
disable_eisa2_irq(irq);
|
|
|
|
outb(0x20, EISA_INT2_CTRL);
|
|
}
|
|
|
|
static void end_eisa2_irq(unsigned int irq)
|
|
{
|
|
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
|
|
enable_eisa2_irq(irq);
|
|
}
|
|
|
|
static struct irq_chip ip22_eisa2_irq_type = {
|
|
.typename = "IP22 EISA",
|
|
.startup = startup_eisa2_irq,
|
|
.ack = mask_and_ack_eisa2_irq,
|
|
.mask = disable_eisa2_irq,
|
|
.mask_ack = mask_and_ack_eisa2_irq,
|
|
.unmask = enable_eisa2_irq,
|
|
.end = end_eisa2_irq,
|
|
};
|
|
|
|
static struct irqaction eisa_action = {
|
|
.handler = ip22_eisa_intr,
|
|
.name = "EISA",
|
|
};
|
|
|
|
static struct irqaction cascade_action = {
|
|
.handler = no_action,
|
|
.name = "EISA cascade",
|
|
};
|
|
|
|
int __init ip22_eisa_init(void)
|
|
{
|
|
int i, c;
|
|
char *str;
|
|
|
|
if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) {
|
|
printk(KERN_INFO "EISA: bus not present.\n");
|
|
return 1;
|
|
}
|
|
|
|
printk(KERN_INFO "EISA: Probing bus...\n");
|
|
for (c = 0, i = 1; i <= IP22_EISA_MAX_SLOTS; i++) {
|
|
if ((str = decode_eisa_sig(0x1000 * i + EISA_VENDOR_ID_OFFSET))) {
|
|
printk(KERN_INFO "EISA: slot %d : %s detected.\n",
|
|
i, str);
|
|
c++;
|
|
}
|
|
}
|
|
printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c < 2 ? "" : "s");
|
|
#ifdef CONFIG_ISA
|
|
printk(KERN_INFO "ISA support compiled in.\n");
|
|
#endif
|
|
|
|
/* Warning : BlackMagicAhead(tm).
|
|
Please wave your favorite dead chicken over the busses */
|
|
|
|
/* First say hello to the EIU */
|
|
outl(0x0000FFFF, EIU_PREMPT_REG);
|
|
outl(1, EIU_QUIET_REG);
|
|
outl(0x40f3c07F, EIU_MODE_REG);
|
|
|
|
/* Now be nice to the EISA chipset */
|
|
outb(1, EISA_EXT_NMI_RESET_CTRL);
|
|
udelay(50); /* Wait long enough for the dust to settle */
|
|
outb(0, EISA_EXT_NMI_RESET_CTRL);
|
|
outb(0x11, EISA_INT1_CTRL);
|
|
outb(0x11, EISA_INT2_CTRL);
|
|
outb(0, EISA_INT1_MASK);
|
|
outb(8, EISA_INT2_MASK);
|
|
outb(4, EISA_INT1_MASK);
|
|
outb(2, EISA_INT2_MASK);
|
|
outb(1, EISA_INT1_MASK);
|
|
outb(1, EISA_INT2_MASK);
|
|
outb(0xfb, EISA_INT1_MASK);
|
|
outb(0xff, EISA_INT2_MASK);
|
|
outb(0, EISA_DMA2_WRITE_SINGLE);
|
|
|
|
for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) {
|
|
if (i < (SGINT_EISA + 8))
|
|
set_irq_chip(i, &ip22_eisa1_irq_type);
|
|
else
|
|
set_irq_chip(i, &ip22_eisa2_irq_type);
|
|
}
|
|
|
|
/* Cannot use request_irq because of kmalloc not being ready at such
|
|
* an early stage. Yes, I've been bitten... */
|
|
setup_irq(SGI_EISA_IRQ, &eisa_action);
|
|
setup_irq(SGINT_EISA + 2, &cascade_action);
|
|
|
|
EISA_bus = 1;
|
|
return 0;
|
|
}
|