forked from Minki/linux
cc155c6f2c
For some platforms, it is inappropriate to register all PXA UARTs. In some cases, the UARTs may not be used, and in others we may want to avoid registering the UARTs to allow other drivers (eg, FICP) to make use of the UART. In addition, a while back there was a request to be able to pass platform data to the UART driver. This patch enables all of this by providing functions platforms can call to register each individual UART. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
212 lines
4.3 KiB
C
212 lines
4.3 KiB
C
/*
|
|
* Hardware definitions for HP iPAQ h5xxx Handheld Computers
|
|
*
|
|
* Copyright 2000-2003 Hewlett-Packard Company.
|
|
* Copyright 2002 Jamey Hicks <jamey.hicks@hp.com>
|
|
* Copyright 2004-2005 Phil Blundell <pb@handhelds.org>
|
|
* Copyright 2007-2008 Anton Vorontsov <cbouatmailru@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
|
|
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
|
|
* FITNESS FOR ANY PARTICULAR PURPOSE.
|
|
*
|
|
* Author: Jamey Hicks.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/pxa25x.h>
|
|
#include <mach/h5000.h>
|
|
#include <mach/udc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
/*
|
|
* Flash
|
|
*/
|
|
|
|
static struct mtd_partition h5000_flash0_partitions[] = {
|
|
{
|
|
.name = "bootldr",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "root",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition h5000_flash1_partitions[] = {
|
|
{
|
|
.name = "second root",
|
|
.size = SZ_16M - 0x00040000,
|
|
.offset = 0,
|
|
},
|
|
{
|
|
.name = "asset",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data h5000_flash0_data = {
|
|
.width = 4,
|
|
.parts = h5000_flash0_partitions,
|
|
.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
|
|
};
|
|
|
|
static struct physmap_flash_data h5000_flash1_data = {
|
|
.width = 4,
|
|
.parts = h5000_flash1_partitions,
|
|
.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
|
|
};
|
|
|
|
static struct resource h5000_flash0_resources = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
};
|
|
|
|
static struct resource h5000_flash1_resources = {
|
|
.start = PXA_CS0_PHYS + SZ_32M,
|
|
.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
};
|
|
|
|
static struct platform_device h5000_flash[] = {
|
|
{
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.resource = &h5000_flash0_resources,
|
|
.num_resources = 1,
|
|
.dev = {
|
|
.platform_data = &h5000_flash0_data,
|
|
},
|
|
},
|
|
{
|
|
.name = "physmap-flash",
|
|
.id = 1,
|
|
.resource = &h5000_flash1_resources,
|
|
.num_resources = 1,
|
|
.dev = {
|
|
.platform_data = &h5000_flash1_data,
|
|
},
|
|
},
|
|
};
|
|
|
|
/*
|
|
* USB Device Controller
|
|
*/
|
|
|
|
static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
|
|
.gpio_pullup = H5000_GPIO_USB_PULLUP,
|
|
};
|
|
|
|
/*
|
|
* GPIO setup
|
|
*/
|
|
|
|
static unsigned long h5000_pin_config[] __initdata = {
|
|
/* Crystal and Clock Signals */
|
|
GPIO12_32KHz,
|
|
|
|
/* SDRAM and Static Memory I/O Signals */
|
|
GPIO15_nCS_1,
|
|
GPIO78_nCS_2,
|
|
GPIO79_nCS_3,
|
|
GPIO80_nCS_4,
|
|
|
|
/* FFUART */
|
|
GPIO34_FFUART_RXD,
|
|
GPIO35_FFUART_CTS,
|
|
GPIO36_FFUART_DCD,
|
|
GPIO37_FFUART_DSR,
|
|
GPIO38_FFUART_RI,
|
|
GPIO39_FFUART_TXD,
|
|
GPIO40_FFUART_DTR,
|
|
GPIO41_FFUART_RTS,
|
|
|
|
/* BTUART */
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
/* SSP1 */
|
|
GPIO23_SSP1_SCLK,
|
|
GPIO25_SSP1_TXD,
|
|
GPIO26_SSP1_RXD,
|
|
|
|
/* I2S */
|
|
GPIO28_I2S_BITCLK_OUT,
|
|
GPIO29_I2S_SDATA_IN,
|
|
GPIO30_I2S_SDATA_OUT,
|
|
GPIO31_I2S_SYNC,
|
|
GPIO32_I2S_SYSCLK,
|
|
};
|
|
|
|
/*
|
|
* Localbus setup:
|
|
* CS0: Flash;
|
|
* CS1: MediaQ chip, select 16-bit bus and vlio;
|
|
* CS5: SAMCOP.
|
|
*/
|
|
|
|
static void fix_msc(void)
|
|
{
|
|
MSC0 = 0x129c24f2;
|
|
MSC1 = 0x7ff424fa;
|
|
MSC2 = 0x7ff47ff4;
|
|
|
|
MDREFR |= 0x02080000;
|
|
}
|
|
|
|
/*
|
|
* Platform devices
|
|
*/
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&h5000_flash[0],
|
|
&h5000_flash[1],
|
|
};
|
|
|
|
static void __init h5000_init(void)
|
|
{
|
|
fix_msc();
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
pxa_set_udc_info(&h5000_udc_mach_info);
|
|
platform_add_devices(ARRAY_AND_SIZE(devices));
|
|
}
|
|
|
|
MACHINE_START(H5400, "HP iPAQ H5000")
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.boot_params = 0xa0000100,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa25x_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = h5000_init,
|
|
MACHINE_END
|