forked from Minki/linux
c54e9a2ac2
This patch adds documentation for the DT bindings of the charger subdevice of ACT8945A MFD. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
36 lines
1.3 KiB
Plaintext
36 lines
1.3 KiB
Plaintext
Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
|
|
|
|
Required properties:
|
|
- compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
|
|
- active-semi,chglev-gpios: charge current level phandle with args
|
|
as described in ../gpio/gpio.txt.
|
|
|
|
Optional properties:
|
|
- active-semi,check-battery-temperature: boolean to check the battery
|
|
temperature or not.
|
|
- active-semi,input-voltage-threshold-microvolt: unit: mV;
|
|
Specifies the charger's input over-voltage threshold value;
|
|
The value can be: 6600, 7000, 7500, 8000; default: 6600
|
|
- active-semi,precondition-timeout: unit: minutes;
|
|
Specifies the charger's PRECONDITION safety timer setting value;
|
|
The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
|
|
default: 40.
|
|
- active-semi,total-timeout: unit: hours;
|
|
Specifies the charger's total safety timer setting value;
|
|
The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
|
|
default: 3.
|
|
|
|
Example:
|
|
pmic@5b {
|
|
compatible = "active-semi,act8945a";
|
|
reg = <0x5b>;
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_charger_chglev>;
|
|
active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
|
|
active-semi,input-voltage-threshold-microvolt = <6600>;
|
|
active-semi,precondition-timeout = <40>;
|
|
active-semi,total-timeout = <3>;
|
|
};
|