forked from Minki/linux
e44b7b7525
Move wakeup code to .c, so that video mode setting code can be shared between boot and wakeup. Remove nasty assembly code in 64-bit case by re-using trampoline code. Stack setup was fixed to clear high 16bits of %esp, maybe that fixes some machines. .c code sharing and morse code was done H. Peter Anvin, Sam Ravnborg reviewed kbuild related stuff, and it seems okay to him. Rafael did some cleanups. [rjw: * Made the patch stop breaking compilation on x86-32 * Added arch/x86/kernel/acpi/sleep.h * Got rid of compiler warnings in arch/x86/kernel/acpi/sleep.c * Fixed 32-bit compilation on x86-64 systems * Added include/asm-x86/trampoline.h and fixed the non-SMP compilation on 64-bit x86 * Removed arch/x86/kernel/acpi/sleep_32.c which was not used * Fixed some breakage caused by the integration of smpboot.c done under us in the meantime] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
195 lines
6.7 KiB
Makefile
195 lines
6.7 KiB
Makefile
#
|
|
# arch/x86/boot/Makefile
|
|
#
|
|
# This file is subject to the terms and conditions of the GNU General Public
|
|
# License. See the file "COPYING" in the main directory of this archive
|
|
# for more details.
|
|
#
|
|
# Copyright (C) 1994 by Linus Torvalds
|
|
#
|
|
|
|
# ROOT_DEV specifies the default root-device when making the image.
|
|
# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
|
|
# the default of FLOPPY is used by 'build'.
|
|
|
|
ROOT_DEV := CURRENT
|
|
|
|
# If you want to preset the SVGA mode, uncomment the next line and
|
|
# set SVGA_MODE to whatever number you want.
|
|
# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
|
|
# The number is the same as you would ordinarily press at bootup.
|
|
|
|
SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
|
|
|
|
# If you want the RAM disk device, define this to be the size in blocks.
|
|
|
|
#RAMDISK := -DRAMDISK=512
|
|
|
|
targets := vmlinux.bin setup.bin setup.elf zImage bzImage
|
|
subdir- := compressed
|
|
|
|
setup-y += a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
|
|
setup-y += header.o main.o mca.o memory.o pm.o pmjump.o
|
|
setup-y += printf.o string.o tty.o video.o video-mode.o version.o
|
|
setup-$(CONFIG_X86_APM_BOOT) += apm.o
|
|
setup-$(CONFIG_X86_VOYAGER) += voyager.o
|
|
|
|
# The link order of the video-*.o modules can matter. In particular,
|
|
# video-vga.o *must* be listed first, followed by video-vesa.o.
|
|
# Hardware-specific drivers should follow in the order they should be
|
|
# probed, and video-bios.o should typically be last.
|
|
setup-y += video-vga.o
|
|
setup-y += video-vesa.o
|
|
setup-y += video-bios.o
|
|
|
|
targets += $(setup-y)
|
|
hostprogs-y := mkcpustr tools/build
|
|
|
|
HOST_EXTRACFLAGS += $(LINUXINCLUDE)
|
|
|
|
$(obj)/cpu.o: $(obj)/cpustr.h
|
|
|
|
quiet_cmd_cpustr = CPUSTR $@
|
|
cmd_cpustr = $(obj)/mkcpustr > $@
|
|
targets += cpustr.h
|
|
$(obj)/cpustr.h: $(obj)/mkcpustr FORCE
|
|
$(call if_changed,cpustr)
|
|
|
|
# ---------------------------------------------------------------------------
|
|
|
|
# How to compile the 16-bit code. Note we always compile for -march=i386,
|
|
# that way we can complain to the user if the CPU is insufficient.
|
|
KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
|
|
-Wall -Wstrict-prototypes \
|
|
-march=i386 -mregparm=3 \
|
|
-include $(srctree)/$(src)/code16gcc.h \
|
|
-fno-strict-aliasing -fomit-frame-pointer \
|
|
$(call cc-option, -ffreestanding) \
|
|
$(call cc-option, -fno-toplevel-reorder,\
|
|
$(call cc-option, -fno-unit-at-a-time)) \
|
|
$(call cc-option, -fno-stack-protector) \
|
|
$(call cc-option, -mpreferred-stack-boundary=2)
|
|
KBUILD_CFLAGS += $(call cc-option,-m32)
|
|
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
|
|
|
|
$(obj)/zImage: IMAGE_OFFSET := 0x1000
|
|
$(obj)/zImage: asflags-y := $(SVGA_MODE) $(RAMDISK)
|
|
$(obj)/bzImage: IMAGE_OFFSET := 0x100000
|
|
$(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__
|
|
$(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
|
|
$(obj)/bzImage: BUILDFLAGS := -b
|
|
|
|
quiet_cmd_image = BUILD $@
|
|
cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
|
|
$(obj)/vmlinux.bin $(ROOT_DEV) > $@
|
|
|
|
$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
|
|
$(obj)/vmlinux.bin $(obj)/tools/build FORCE
|
|
$(call if_changed,image)
|
|
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
|
|
|
|
OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
|
|
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
|
|
|
|
sed-offsets := -e 's/^00*/0/' \
|
|
-e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
|
|
|
|
quiet_cmd_offsets = OFFSETS $@
|
|
cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
|
|
|
|
$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
|
|
$(call if_changed,offsets)
|
|
|
|
targets += offsets.h
|
|
|
|
AFLAGS_header.o += -I$(obj)
|
|
$(obj)/header.o: $(obj)/offsets.h
|
|
|
|
LDFLAGS_setup.elf := -T
|
|
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
|
|
$(call if_changed,ld)
|
|
|
|
OBJCOPYFLAGS_setup.bin := -O binary
|
|
$(obj)/setup.bin: $(obj)/setup.elf FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
$(obj)/compressed/vmlinux: FORCE
|
|
$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
|
|
|
|
# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
|
|
FDARGS =
|
|
# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
|
|
FDINITRD =
|
|
|
|
image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
|
|
|
|
$(obj)/mtools.conf: $(src)/mtools.conf.in
|
|
sed -e 's|@OBJ@|$(obj)|g' < $< > $@
|
|
|
|
# This requires write access to /dev/fd0
|
|
zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
|
|
MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
|
|
syslinux /dev/fd0 ; sync
|
|
echo '$(image_cmdline)' | \
|
|
MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
|
|
if [ -f '$(FDINITRD)' ] ; then \
|
|
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
|
|
fi
|
|
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
|
|
|
|
# These require being root or having syslinux 2.02 or higher installed
|
|
fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
|
|
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
|
|
MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
|
|
syslinux $(obj)/fdimage ; sync
|
|
echo '$(image_cmdline)' | \
|
|
MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
|
|
if [ -f '$(FDINITRD)' ] ; then \
|
|
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
|
|
fi
|
|
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
|
|
|
|
fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
|
|
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
|
|
MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
|
|
syslinux $(obj)/fdimage ; sync
|
|
echo '$(image_cmdline)' | \
|
|
MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
|
|
if [ -f '$(FDINITRD)' ] ; then \
|
|
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
|
|
fi
|
|
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
|
|
|
|
isoimage: $(BOOTIMAGE)
|
|
-rm -rf $(obj)/isoimage
|
|
mkdir $(obj)/isoimage
|
|
for i in lib lib64 share end ; do \
|
|
if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
|
|
cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
|
|
break ; \
|
|
fi ; \
|
|
if [ $$i = end ] ; then exit 1 ; fi ; \
|
|
done
|
|
cp $(BOOTIMAGE) $(obj)/isoimage/linux
|
|
echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
|
|
if [ -f '$(FDINITRD)' ] ; then \
|
|
cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
|
|
fi
|
|
mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
|
|
-no-emul-boot -boot-load-size 4 -boot-info-table \
|
|
$(obj)/isoimage
|
|
rm -rf $(obj)/isoimage
|
|
|
|
zlilo: $(BOOTIMAGE)
|
|
if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
|
|
if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
|
|
cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
|
|
cp System.map $(INSTALL_PATH)/
|
|
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
|
|
|
|
install:
|
|
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
|