forked from Minki/linux
b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
148 lines
4.3 KiB
C
148 lines
4.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef _ASM_X86_NOPS_H
|
|
#define _ASM_X86_NOPS_H
|
|
|
|
/*
|
|
* Define nops for use with alternative() and for tracing.
|
|
*
|
|
* *_NOP5_ATOMIC must be a single instruction.
|
|
*/
|
|
|
|
#define NOP_DS_PREFIX 0x3e
|
|
|
|
/* generic versions from gas
|
|
1: nop
|
|
the following instructions are NOT nops in 64-bit mode,
|
|
for 64-bit mode use K8 or P6 nops instead
|
|
2: movl %esi,%esi
|
|
3: leal 0x00(%esi),%esi
|
|
4: leal 0x00(,%esi,1),%esi
|
|
6: leal 0x00000000(%esi),%esi
|
|
7: leal 0x00000000(,%esi,1),%esi
|
|
*/
|
|
#define GENERIC_NOP1 0x90
|
|
#define GENERIC_NOP2 0x89,0xf6
|
|
#define GENERIC_NOP3 0x8d,0x76,0x00
|
|
#define GENERIC_NOP4 0x8d,0x74,0x26,0x00
|
|
#define GENERIC_NOP5 GENERIC_NOP1,GENERIC_NOP4
|
|
#define GENERIC_NOP6 0x8d,0xb6,0x00,0x00,0x00,0x00
|
|
#define GENERIC_NOP7 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00
|
|
#define GENERIC_NOP8 GENERIC_NOP1,GENERIC_NOP7
|
|
#define GENERIC_NOP5_ATOMIC NOP_DS_PREFIX,GENERIC_NOP4
|
|
|
|
/* Opteron 64bit nops
|
|
1: nop
|
|
2: osp nop
|
|
3: osp osp nop
|
|
4: osp osp osp nop
|
|
*/
|
|
#define K8_NOP1 GENERIC_NOP1
|
|
#define K8_NOP2 0x66,K8_NOP1
|
|
#define K8_NOP3 0x66,K8_NOP2
|
|
#define K8_NOP4 0x66,K8_NOP3
|
|
#define K8_NOP5 K8_NOP3,K8_NOP2
|
|
#define K8_NOP6 K8_NOP3,K8_NOP3
|
|
#define K8_NOP7 K8_NOP4,K8_NOP3
|
|
#define K8_NOP8 K8_NOP4,K8_NOP4
|
|
#define K8_NOP5_ATOMIC 0x66,K8_NOP4
|
|
|
|
/* K7 nops
|
|
uses eax dependencies (arbitrary choice)
|
|
1: nop
|
|
2: movl %eax,%eax
|
|
3: leal (,%eax,1),%eax
|
|
4: leal 0x00(,%eax,1),%eax
|
|
6: leal 0x00000000(%eax),%eax
|
|
7: leal 0x00000000(,%eax,1),%eax
|
|
*/
|
|
#define K7_NOP1 GENERIC_NOP1
|
|
#define K7_NOP2 0x8b,0xc0
|
|
#define K7_NOP3 0x8d,0x04,0x20
|
|
#define K7_NOP4 0x8d,0x44,0x20,0x00
|
|
#define K7_NOP5 K7_NOP4,K7_NOP1
|
|
#define K7_NOP6 0x8d,0x80,0,0,0,0
|
|
#define K7_NOP7 0x8D,0x04,0x05,0,0,0,0
|
|
#define K7_NOP8 K7_NOP7,K7_NOP1
|
|
#define K7_NOP5_ATOMIC NOP_DS_PREFIX,K7_NOP4
|
|
|
|
/* P6 nops
|
|
uses eax dependencies (Intel-recommended choice)
|
|
1: nop
|
|
2: osp nop
|
|
3: nopl (%eax)
|
|
4: nopl 0x00(%eax)
|
|
5: nopl 0x00(%eax,%eax,1)
|
|
6: osp nopl 0x00(%eax,%eax,1)
|
|
7: nopl 0x00000000(%eax)
|
|
8: nopl 0x00000000(%eax,%eax,1)
|
|
Note: All the above are assumed to be a single instruction.
|
|
There is kernel code that depends on this.
|
|
*/
|
|
#define P6_NOP1 GENERIC_NOP1
|
|
#define P6_NOP2 0x66,0x90
|
|
#define P6_NOP3 0x0f,0x1f,0x00
|
|
#define P6_NOP4 0x0f,0x1f,0x40,0
|
|
#define P6_NOP5 0x0f,0x1f,0x44,0x00,0
|
|
#define P6_NOP6 0x66,0x0f,0x1f,0x44,0x00,0
|
|
#define P6_NOP7 0x0f,0x1f,0x80,0,0,0,0
|
|
#define P6_NOP8 0x0f,0x1f,0x84,0x00,0,0,0,0
|
|
#define P6_NOP5_ATOMIC P6_NOP5
|
|
|
|
#ifdef __ASSEMBLY__
|
|
#define _ASM_MK_NOP(x) .byte x
|
|
#else
|
|
#define _ASM_MK_NOP(x) ".byte " __stringify(x) "\n"
|
|
#endif
|
|
|
|
#if defined(CONFIG_MK7)
|
|
#define ASM_NOP1 _ASM_MK_NOP(K7_NOP1)
|
|
#define ASM_NOP2 _ASM_MK_NOP(K7_NOP2)
|
|
#define ASM_NOP3 _ASM_MK_NOP(K7_NOP3)
|
|
#define ASM_NOP4 _ASM_MK_NOP(K7_NOP4)
|
|
#define ASM_NOP5 _ASM_MK_NOP(K7_NOP5)
|
|
#define ASM_NOP6 _ASM_MK_NOP(K7_NOP6)
|
|
#define ASM_NOP7 _ASM_MK_NOP(K7_NOP7)
|
|
#define ASM_NOP8 _ASM_MK_NOP(K7_NOP8)
|
|
#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K7_NOP5_ATOMIC)
|
|
#elif defined(CONFIG_X86_P6_NOP)
|
|
#define ASM_NOP1 _ASM_MK_NOP(P6_NOP1)
|
|
#define ASM_NOP2 _ASM_MK_NOP(P6_NOP2)
|
|
#define ASM_NOP3 _ASM_MK_NOP(P6_NOP3)
|
|
#define ASM_NOP4 _ASM_MK_NOP(P6_NOP4)
|
|
#define ASM_NOP5 _ASM_MK_NOP(P6_NOP5)
|
|
#define ASM_NOP6 _ASM_MK_NOP(P6_NOP6)
|
|
#define ASM_NOP7 _ASM_MK_NOP(P6_NOP7)
|
|
#define ASM_NOP8 _ASM_MK_NOP(P6_NOP8)
|
|
#define ASM_NOP5_ATOMIC _ASM_MK_NOP(P6_NOP5_ATOMIC)
|
|
#elif defined(CONFIG_X86_64)
|
|
#define ASM_NOP1 _ASM_MK_NOP(K8_NOP1)
|
|
#define ASM_NOP2 _ASM_MK_NOP(K8_NOP2)
|
|
#define ASM_NOP3 _ASM_MK_NOP(K8_NOP3)
|
|
#define ASM_NOP4 _ASM_MK_NOP(K8_NOP4)
|
|
#define ASM_NOP5 _ASM_MK_NOP(K8_NOP5)
|
|
#define ASM_NOP6 _ASM_MK_NOP(K8_NOP6)
|
|
#define ASM_NOP7 _ASM_MK_NOP(K8_NOP7)
|
|
#define ASM_NOP8 _ASM_MK_NOP(K8_NOP8)
|
|
#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K8_NOP5_ATOMIC)
|
|
#else
|
|
#define ASM_NOP1 _ASM_MK_NOP(GENERIC_NOP1)
|
|
#define ASM_NOP2 _ASM_MK_NOP(GENERIC_NOP2)
|
|
#define ASM_NOP3 _ASM_MK_NOP(GENERIC_NOP3)
|
|
#define ASM_NOP4 _ASM_MK_NOP(GENERIC_NOP4)
|
|
#define ASM_NOP5 _ASM_MK_NOP(GENERIC_NOP5)
|
|
#define ASM_NOP6 _ASM_MK_NOP(GENERIC_NOP6)
|
|
#define ASM_NOP7 _ASM_MK_NOP(GENERIC_NOP7)
|
|
#define ASM_NOP8 _ASM_MK_NOP(GENERIC_NOP8)
|
|
#define ASM_NOP5_ATOMIC _ASM_MK_NOP(GENERIC_NOP5_ATOMIC)
|
|
#endif
|
|
|
|
#define ASM_NOP_MAX 8
|
|
#define NOP_ATOMIC5 (ASM_NOP_MAX+1) /* Entry for the 5-byte atomic NOP */
|
|
|
|
#ifndef __ASSEMBLY__
|
|
extern const unsigned char * const *ideal_nops;
|
|
extern void arch_init_ideal_nops(void);
|
|
#endif
|
|
|
|
#endif /* _ASM_X86_NOPS_H */
|