leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e31dd6e452
linux/drivers/isdn/hisax/sedlbauer.c
Adrian Bunk 672c3fd906 [PATCH] drivers/isdn/hisax/: possible cleanups 
This patch contains the following possible cleanups:
- make needlessly global code static
- remove the compiled but unused st5481_hdlc.{c,h}
- kill enternow.h
- enternow_pci.c: kill InByte/OutByte/BYTE
- isdnl2.c: kill FreeSkb
- remove or #if 0 the following unused functions:
  - config.c: IsdnCardState
  - ipacx.c: ipacx_new_ph
  - ipacx.c: dch_bh
  - ipacx.c: setup_ipacx
  - isdnl2.c: IsRR

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Kai Germaschewski <kai@germaschewski.name>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:25:07 -07:00

834 lines
24 KiB
C
Raw Blame History

/* $Id: sedlbauer.c,v 1.34.2.6 2004/01/24 20:47:24 keil Exp $
*
* low level stuff for Sedlbauer cards
* includes support for the Sedlbauer speed star (speed star II),
* support for the Sedlbauer speed fax+,
* support for the Sedlbauer ISDN-Controller PC/104 and
* support for the Sedlbauer speed pci
* derived from the original file asuscom.c from Karsten Keil
*
* Author Marcus Niemann
* Copyright by Marcus Niemann <niemann@www-bib.fh-bielefeld.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
* Thanks to Karsten Keil
* Sedlbauer AG for informations
* Edgar Toernig
*
*/
/* Supported cards:
* Card: Chip: Configuration: Comment:
* ---------------------------------------------------------------------
* Speed Card ISAC_HSCX DIP-SWITCH
* Speed Win ISAC_HSCX ISAPNP
* Speed Fax+ ISAC_ISAR ISAPNP Full analog support
* Speed Star ISAC_HSCX CARDMGR
* Speed Win2 IPAC ISAPNP
* ISDN PC/104 IPAC DIP-SWITCH
* Speed Star2 IPAC CARDMGR
* Speed PCI IPAC PCI PNP
* Speed Fax+ ISAC_ISAR PCI PNP Full analog support
*
* Important:
* For the sedlbauer speed fax+ to work properly you have to download
* the firmware onto the card.
* For example: hisaxctrl <DriverID> 9 ISAR.BIN
*/
#include <linux/init.h>
#include <linux/config.h>
#include "hisax.h"
#include "isac.h"
#include "ipac.h"
#include "hscx.h"
#include "isar.h"
#include "isdnl1.h"
#include <linux/pci.h>
#include <linux/isapnp.h>
extern const char *CardType[];
static const char *Sedlbauer_revision = "$Revision: 1.34.2.6 $";
static const char *Sedlbauer_Types[] =
{"None", "speed card/win", "speed star", "speed fax+",
"speed win II / ISDN PC/104", "speed star II", "speed pci",
"speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
#define PCI_SUBVENDOR_SPEEDFAX_PYRAMID 0x51
#define PCI_SUBVENDOR_HST_SAPHIR3 0x52
#define PCI_SUBVENDOR_SEDLBAUER_PCI 0x53
#define PCI_SUBVENDOR_SPEEDFAX_PCI 0x54
#define PCI_SUB_ID_SEDLBAUER 0x01
#define SEDL_SPEED_CARD_WIN 1
#define SEDL_SPEED_STAR 2
#define SEDL_SPEED_FAX 3
#define SEDL_SPEED_WIN2_PC104 4
#define SEDL_SPEED_STAR2 5
#define SEDL_SPEED_PCI 6
#define SEDL_SPEEDFAX_PYRAMID 7
#define SEDL_SPEEDFAX_PCI 8
#define HST_SAPHIR3 9
#define SEDL_CHIP_TEST 0
#define SEDL_CHIP_ISAC_HSCX 1
#define SEDL_CHIP_ISAC_ISAR 2
#define SEDL_CHIP_IPAC 3
#define SEDL_BUS_ISA 1
#define SEDL_BUS_PCI 2
#define SEDL_BUS_PCMCIA 3
#define byteout(addr,val) outb(val,addr)
#define bytein(addr) inb(addr)
#define SEDL_HSCX_ISA_RESET_ON 0
#define SEDL_HSCX_ISA_RESET_OFF 1
#define SEDL_HSCX_ISA_ISAC 2
#define SEDL_HSCX_ISA_HSCX 3
#define SEDL_HSCX_ISA_ADR 4
#define SEDL_HSCX_PCMCIA_RESET 0
#define SEDL_HSCX_PCMCIA_ISAC 1
#define SEDL_HSCX_PCMCIA_HSCX 2
#define SEDL_HSCX_PCMCIA_ADR 4
#define SEDL_ISAR_ISA_ISAC 4
#define SEDL_ISAR_ISA_ISAR 6
#define SEDL_ISAR_ISA_ADR 8
#define SEDL_ISAR_ISA_ISAR_RESET_ON 10
#define SEDL_ISAR_ISA_ISAR_RESET_OFF 12
#define SEDL_IPAC_ANY_ADR 0
#define SEDL_IPAC_ANY_IPAC 2
#define SEDL_IPAC_PCI_BASE 0
#define SEDL_IPAC_PCI_ADR 0xc0
#define SEDL_IPAC_PCI_IPAC 0xc8
#define SEDL_ISAR_PCI_ADR 0xc8
#define SEDL_ISAR_PCI_ISAC 0xd0
#define SEDL_ISAR_PCI_ISAR 0xe0
#define SEDL_ISAR_PCI_ISAR_RESET_ON 0x01
#define SEDL_ISAR_PCI_ISAR_RESET_OFF 0x18
#define SEDL_ISAR_PCI_LED1 0x08
#define SEDL_ISAR_PCI_LED2 0x10
#define SEDL_RESET 0x3 /* same as DOS driver */
static inline u_char
readreg(unsigned int ale, unsigned int adr, u_char off)
{
register u_char ret;
byteout(ale, off);
ret = bytein(adr);
return (ret);
}
static inline void
readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
{
byteout(ale, off);
insb(adr, data, size);
}
static inline void
writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
{
byteout(ale, off);
byteout(adr, data);
}
static inline void
writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
{
byteout(ale, off);
outsb(adr, data, size);
}
/* Interface functions */
static u_char
ReadISAC(struct IsdnCardState *cs, u_char offset)
{
return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset));
}
static void
WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
{
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset, value);
}
static void
ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
{
readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
}
static void
WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
{
writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
}
static u_char
ReadISAC_IPAC(struct IsdnCardState *cs, u_char offset)
{
return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80));
}
static void
WriteISAC_IPAC(struct IsdnCardState *cs, u_char offset, u_char value)
{
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80, value);
}
static void
ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
{
readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
}
static void
WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
{
writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
}
static u_char
ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
{
return (readreg(cs->hw.sedl.adr,
cs->hw.sedl.hscx, offset + (hscx ? 0x40 : 0)));
}
static void
WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
{
writereg(cs->hw.sedl.adr,
cs->hw.sedl.hscx, offset + (hscx ? 0x40 : 0), value);
}
/* ISAR access routines
* mode = 0 access with IRQ on
* mode = 1 access with IRQ off
* mode = 2 access with IRQ off and using last offset
*/
static u_char
ReadISAR(struct IsdnCardState *cs, int mode, u_char offset)
{
if (mode == 0)
return (readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset));
else if (mode == 1)
byteout(cs->hw.sedl.adr, offset);
return(bytein(cs->hw.sedl.hscx));
}
static void
WriteISAR(struct IsdnCardState *cs, int mode, u_char offset, u_char value)
{
if (mode == 0)
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset, value);
else {
if (mode == 1)
byteout(cs->hw.sedl.adr, offset);
byteout(cs->hw.sedl.hscx, value);
}
}
/*
* fast interrupt HSCX stuff goes here
*/
#define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr, \
cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr, \
cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr, \
cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr, \
cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
#include "hscx_irq.c"
static irqreturn_t
sedlbauer_interrupt(int intno, void *dev_id, struct pt_regs *regs)
{
struct IsdnCardState *cs = dev_id;
u_char val;
u_long flags;
spin_lock_irqsave(&cs->lock, flags);
if ((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) && (*cs->busy_flag == 1)) {
/* The card tends to generate interrupts while being removed
causing us to just crash the kernel. bad. */
spin_unlock_irqrestore(&cs->lock, flags);
printk(KERN_WARNING "Sedlbauer: card not available!\n");
return IRQ_NONE;
}
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
Start_HSCX:
if (val)
hscx_int_main(cs, val);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
Start_ISAC:
if (val)
isac_interrupt(cs, val);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
if (val) {
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "HSCX IntStat after IntRoutine");
goto Start_HSCX;
}
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
if (val) {
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "ISAC IntStat after IntRoutine");
goto Start_ISAC;
}
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK + 0x40, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK + 0x40, 0x0);
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
}
static irqreturn_t
sedlbauer_interrupt_ipac(int intno, void *dev_id, struct pt_regs *regs)
{
struct IsdnCardState *cs = dev_id;
u_char ista, val, icnt = 5;
u_long flags;
spin_lock_irqsave(&cs->lock, flags);
ista = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ISTA);
Start_IPAC:
if (cs->debug & L1_DEB_IPAC)
debugl1(cs, "IPAC ISTA %02X", ista);
if (ista & 0x0f) {
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
if (ista & 0x01)
val |= 0x01;
if (ista & 0x04)
val |= 0x02;
if (ista & 0x08)
val |= 0x04;
if (val)
hscx_int_main(cs, val);
}
if (ista & 0x20) {
val = 0xfe & readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA | 0x80);
if (val) {
isac_interrupt(cs, val);
}
}
if (ista & 0x10) {
val = 0x01;
isac_interrupt(cs, val);
}
ista = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ISTA);
if ((ista & 0x3f) && icnt) {
icnt--;
goto Start_IPAC;
}
if (!icnt)
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "Sedlbauer IRQ LOOP");
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xC0);
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
}
static irqreturn_t
sedlbauer_interrupt_isar(int intno, void *dev_id, struct pt_regs *regs)
{
struct IsdnCardState *cs = dev_id;
u_char val;
int cnt = 5;
u_long flags;
spin_lock_irqsave(&cs->lock, flags);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
Start_ISAR:
if (val & ISAR_IRQSTA)
isar_int_main(cs);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
Start_ISAC:
if (val)
isac_interrupt(cs, val);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
if ((val & ISAR_IRQSTA) && --cnt) {
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "ISAR IntStat after IntRoutine");
goto Start_ISAR;
}
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
if (val && --cnt) {
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "ISAC IntStat after IntRoutine");
goto Start_ISAC;
}
if (!cnt)
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "Sedlbauer IRQ LOOP");
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT, 0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT, ISAR_IRQMSK);
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
}
static void
release_io_sedlbauer(struct IsdnCardState *cs)
{
int bytecnt = 8;
if (cs->subtyp == SEDL_SPEED_FAX) {
bytecnt = 16;
} else if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
bytecnt = 256;
}
if (cs->hw.sedl.cfg_reg)
release_region(cs->hw.sedl.cfg_reg, bytecnt);
}
static void
reset_sedlbauer(struct IsdnCardState *cs)
{
printk(KERN_INFO "Sedlbauer: resetting card\n");
if (!((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) &&
(cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x20);
mdelay(2);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x0);
mdelay(10);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_CONF, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ACFG, 0xff);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_AOE, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xc0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_PCFG, 0x12);
} else if ((cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) &&
(cs->hw.sedl.bus == SEDL_BUS_PCI)) {
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
mdelay(2);
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
mdelay(10);
} else {
byteout(cs->hw.sedl.reset_on, SEDL_RESET); /* Reset On */
mdelay(2);
byteout(cs->hw.sedl.reset_off, 0); /* Reset Off */
mdelay(10);
}
}
}
static int
Sedl_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
u_long flags;
switch (mt) {
case CARD_RESET:
spin_lock_irqsave(&cs->lock, flags);
reset_sedlbauer(cs);
spin_unlock_irqrestore(&cs->lock, flags);
return(0);
case CARD_RELEASE:
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
spin_lock_irqsave(&cs->lock, flags);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
ISAR_IRQBIT, 0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
ISAC_MASK, 0xFF);
reset_sedlbauer(cs);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
ISAR_IRQBIT, 0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
ISAC_MASK, 0xFF);
spin_unlock_irqrestore(&cs->lock, flags);
}
release_io_sedlbauer(cs);
return(0);
case CARD_INIT:
spin_lock_irqsave(&cs->lock, flags);
reset_sedlbauer(cs);
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
clear_pending_isac_ints(cs);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
ISAR_IRQBIT, 0);
initisac(cs);
initisar(cs);
/* Reenable all IRQ */
cs->writeisac(cs, ISAC_MASK, 0);
/* RESET Receiver and Transmitter */
cs->writeisac(cs, ISAC_CMDR, 0x41);
} else {
inithscxisac(cs, 3);
}
spin_unlock_irqrestore(&cs->lock, flags);
return(0);
case CARD_TEST:
return(0);
case MDL_INFO_CONN:
if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
return(0);
spin_lock_irqsave(&cs->lock, flags);
if ((long) arg)
cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
else
cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
spin_unlock_irqrestore(&cs->lock, flags);
break;
case MDL_INFO_REL:
if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
return(0);
spin_lock_irqsave(&cs->lock, flags);
if ((long) arg)
cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
else
cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
spin_unlock_irqrestore(&cs->lock, flags);
break;
}
return(0);
}
static struct pci_dev *dev_sedl __devinitdata = NULL;
#ifdef __ISAPNP__
static struct isapnp_device_id sedl_ids[] __devinitdata = {
{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
(unsigned long) "Speed win" },
{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
(unsigned long) "Speed Fax+" },
{ 0, }
};
static struct isapnp_device_id *ipid __devinitdata = &sedl_ids[0];
static struct pnp_card *pnp_c __devinitdata = NULL;
#endif
int __devinit
setup_sedlbauer(struct IsdnCard *card)
{
int bytecnt, ver, val;
struct IsdnCardState *cs = card->cs;
char tmp[64];
u16 sub_vendor_id, sub_id;
strcpy(tmp, Sedlbauer_revision);
printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
cs->subtyp = SEDL_SPEED_CARD_WIN;
cs->hw.sedl.bus = SEDL_BUS_ISA;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {
cs->subtyp = SEDL_SPEED_STAR;
cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {
cs->subtyp = SEDL_SPEED_FAX;
cs->hw.sedl.bus = SEDL_BUS_ISA;
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
} else
return (0);
bytecnt = 8;
if (card->para[1]) {
cs->hw.sedl.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
bytecnt = 16;
}
} else {
#ifdef __ISAPNP__
if (isapnp_present()) {
struct pnp_dev *pnp_d;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__FUNCTION__, err);
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
return(0);
}
cs->hw.sedl.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (ipid->function == ISAPNP_FUNCTION(0x2)) {
cs->subtyp = SEDL_SPEED_FAX;
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
bytecnt = 16;
} else {
cs->subtyp = SEDL_SPEED_CARD_WIN;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
}
goto ready;
} else {
printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
return(0);
}
}
ipid++;
pnp_c = NULL;
}
if (!ipid->card_vendor) {
printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
}
}
#endif
/* Probe for Sedlbauer speed pci */
#ifdef CONFIG_PCI
if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
if (pci_enable_device(dev_sedl))
return(0);
cs->irq = dev_sedl->irq;
if (!cs->irq) {
printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
return(0);
}
cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
} else {
printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
return(0);
}
cs->irq_flags |= SA_SHIRQ;
cs->hw.sedl.bus = SEDL_BUS_PCI;
sub_vendor_id = dev_sedl->subsystem_vendor;
sub_id = dev_sedl->subsystem_device;
printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
sub_vendor_id, sub_id);
printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
cs->hw.sedl.cfg_reg);
if (sub_id != PCI_SUB_ID_SEDLBAUER) {
printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
return(0);
}
if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
cs->subtyp = SEDL_SPEEDFAX_PYRAMID;
} else if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PCI) {
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
cs->subtyp = SEDL_SPEEDFAX_PCI;
} else if (sub_vendor_id == PCI_SUBVENDOR_HST_SAPHIR3) {
cs->hw.sedl.chip = SEDL_CHIP_IPAC;
cs->subtyp = HST_SAPHIR3;
} else if (sub_vendor_id == PCI_SUBVENDOR_SEDLBAUER_PCI) {
cs->hw.sedl.chip = SEDL_CHIP_IPAC;
cs->subtyp = SEDL_SPEED_PCI;
} else {
printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
sub_vendor_id);
return(0);
}
bytecnt = 256;
cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
byteout(cs->hw.sedl.cfg_reg, 0xff);
byteout(cs->hw.sedl.cfg_reg, 0x00);
byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
mdelay(2);
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
mdelay(10);
#else
printk(KERN_WARNING "Sedlbauer: NO_PCI_BIOS\n");
return (0);
#endif /* CONFIG_PCI */
}
ready:
/* In case of the sedlbauer pcmcia card, this region is in use,
* reserved for us by the card manager. So we do not check it
* here, it would fail.
*/
if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
!request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
cs->hw.sedl.cfg_reg,
cs->hw.sedl.cfg_reg + bytecnt);
return (0);
}
printk(KERN_INFO
"Sedlbauer: defined at 0x%x-0x%x IRQ %d\n",
cs->hw.sedl.cfg_reg,
cs->hw.sedl.cfg_reg + bytecnt,
cs->irq);
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &Sedl_card_msg;
/*
* testing ISA and PCMCIA Cards for IPAC, default is ISAC
* do not test for PCI card, because ports are different
* and PCI card uses only IPAC (for the moment)
*/
if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
if ((val == 1) || (val == 2)) {
/* IPAC */
cs->subtyp = SEDL_SPEED_WIN2_PC104;
if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
cs->subtyp = SEDL_SPEED_STAR2;
}
cs->hw.sedl.chip = SEDL_CHIP_IPAC;
} else {
/* ISAC_HSCX oder ISAC_ISAR */
if (cs->hw.sedl.chip == SEDL_CHIP_TEST) {
cs->hw.sedl.chip = SEDL_CHIP_ISAC_HSCX;
}
}
}
/*
* hw.sedl.chip is now properly set
*/
printk(KERN_INFO "Sedlbauer: %s detected\n",
Sedlbauer_Types[cs->subtyp]);
setup_isac(cs);
if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
}
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
cs->readisac = &ReadISAC_IPAC;
cs->writeisac = &WriteISAC_IPAC;
cs->readisacfifo = &ReadISACfifo_IPAC;
cs->writeisacfifo = &WriteISACfifo_IPAC;
cs->irq_func = &sedlbauer_interrupt_ipac;
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
} else {
/* ISAC_HSCX oder ISAC_ISAR */
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
SEDL_ISAR_PCI_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
SEDL_ISAR_PCI_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
SEDL_ISAR_PCI_ISAR;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAR;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAR_RESET_ON;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAR_RESET_OFF;
}
cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
test_and_set_bit(HW_ISAR, &cs->HW_Flags);
cs->irq_func = &sedlbauer_interrupt_isar;
cs->auxcmd = &isar_auxcmd;
ISACVersion(cs, "Sedlbauer:");
cs->BC_Read_Reg = &ReadISAR;
cs->BC_Write_Reg = &WriteISAR;
cs->BC_Send_Data = &isar_fill_fifo;
bytecnt = 3;
while (bytecnt) {
ver = ISARVersion(cs, "Sedlbauer:");
if (ver < 0)
printk(KERN_WARNING
"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
else
break;
reset_sedlbauer(cs);
bytecnt--;
}
if (!bytecnt) {
release_io_sedlbauer(cs);
return (0);
}
} else {
if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
cs->irq_flags |= SA_SHIRQ;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
}
cs->irq_func = &sedlbauer_interrupt;
ISACVersion(cs, "Sedlbauer:");
if (HscxVersion(cs, "Sedlbauer:")) {
printk(KERN_WARNING
"Sedlbauer: wrong HSCX versions check IO address\n");
release_io_sedlbauer(cs);
return (0);
}
}
}
return (1);
}
Reference in New Issue View Git Blame Copy Permalink