linux

History

Lyude Paul 342406e4fb drm/nouveau/i2c: Disable i2c bus access after ->fini() For a while, we've had the problem of i2c bus access not grabbing a runtime PM ref when it's being used in userspace by i2c-dev, resulting in nouveau spamming the kernel log with errors if anything attempts to access the i2c bus while the GPU is in runtime suspend. An example: [ 130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff Since the GPU is in runtime suspend, the MMIO region that the i2c bus is on isn't accessible. On x86, the standard behavior for accessing an unavailable MMIO region is to just return ~0. Except, that turned out to be a lie. While computers with a clean concious will return ~0 in this scenario, some machines will actually completely hang a CPU on certian bad MMIO accesses. This was witnessed with someone's Lenovo ThinkPad P50, where sensors-detect attempting to access the i2c bus while the GPU was suspended would result in a CPU hang: CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1 Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017 RIP: 0010:ioread32+0x2b/0x30 Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3 48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f 40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48 RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13 RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186 RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4 RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7 R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000 R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000 FS: 00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: g94_i2c_aux_xfer+0x326/0x850 [nouveau] nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau] __i2c_transfer+0x14b/0x620 i2c_smbus_xfer_emulated+0x159/0x680 ? _raw_spin_unlock_irqrestore+0x1/0x60 ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0 ? __lock_is_held+0x59/0xa0 __i2c_smbus_xfer+0x138/0x5a0 i2c_smbus_xfer+0x4f/0x80 i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev] i2cdev_ioctl+0x1db/0x2c0 [i2c_dev] do_vfs_ioctl+0x408/0x750 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x60/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f25317f546b Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003 RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0 R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80 R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0 watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438] Yikes! While I wanted to try to make it so that accessing an i2c bus on nouveau would wake up the GPU as needed, airlied pointed out that pretty much any usecase for userspace accessing an i2c bus on a GPU (mainly for the DDC brightness control that some displays have) is going to only be useful while there's at least one display enabled on the GPU anyway, and the GPU never sleeps while there's displays running. Since teaching the i2c bus to wake up the GPU on userspace accesses is a good deal more difficult than it might seem, mostly due to the fact that we have to use the i2c bus during runtime resume of the GPU, we instead opt for the easiest solution: don't let userspace access i2c busses on the GPU at all while it's in runtime suspend. Changes since v1: * Also disable i2c busses that run over DP AUX Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>	2019-05-01 11:08:39 +10:00
..
nvif	drm/nouveau/fault/gv100-: expose VoltaFaultBufferA	2019-02-20 09:00:01 +10:00
nvkm	drm/nouveau/i2c: Disable i2c bus access after ->fini()	2019-05-01 11:08:39 +10:00

Lyude Paul 342406e4fb drm/nouveau/i2c: Disable i2c bus access after ->fini()

For a while, we've had the problem of i2c bus access not grabbing
a runtime PM ref when it's being used in userspace by i2c-dev, resulting
in nouveau spamming the kernel log with errors if anything attempts to
access the i2c bus while the GPU is in runtime suspend. An example:

[  130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff

Since the GPU is in runtime suspend, the MMIO region that the i2c bus is
on isn't accessible. On x86, the standard behavior for accessing an
unavailable MMIO region is to just return ~0.

Except, that turned out to be a lie. While computers with a clean
concious will return ~0 in this scenario, some machines will actually
completely hang a CPU on certian bad MMIO accesses. This was witnessed
with someone's Lenovo ThinkPad P50, where sensors-detect attempting to
access the i2c bus while the GPU was suspended would result in a CPU
hang:

  CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1
  Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017
  RIP: 0010:ioread32+0x2b/0x30
  Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3
  48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f
  40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48
  RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13
  RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186
  RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4
  RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7
  R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000
  R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000
  FS:  00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   g94_i2c_aux_xfer+0x326/0x850 [nouveau]
   nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau]
   __i2c_transfer+0x14b/0x620
   i2c_smbus_xfer_emulated+0x159/0x680
   ? _raw_spin_unlock_irqrestore+0x1/0x60
   ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0
   ? __lock_is_held+0x59/0xa0
   __i2c_smbus_xfer+0x138/0x5a0
   i2c_smbus_xfer+0x4f/0x80
   i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev]
   i2cdev_ioctl+0x1db/0x2c0 [i2c_dev]
   do_vfs_ioctl+0x408/0x750
   ksys_ioctl+0x5e/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x60/0x1e0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f25317f546b
  Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
  ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
  f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b
  RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003
  RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0
  R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80
  R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0
  watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438]

Yikes! While I wanted to try to make it so that accessing an i2c bus on
nouveau would wake up the GPU as needed, airlied pointed out that pretty
much any usecase for userspace accessing an i2c bus on a GPU (mainly for
the DDC brightness control that some displays have) is going to only be
useful while there's at least one display enabled on the GPU anyway, and
the GPU never sleeps while there's displays running.

Since teaching the i2c bus to wake up the GPU on userspace accesses is a
good deal more difficult than it might seem, mostly due to the fact that
we have to use the i2c bus during runtime resume of the GPU, we instead
opt for the easiest solution: don't let userspace access i2c busses on
the GPU at all while it's in runtime suspend.

Changes since v1:
* Also disable i2c busses that run over DP AUX

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

2019-05-01 11:08:39 +10:00

nvif

drm/nouveau/fault/gv100-: expose VoltaFaultBufferA

2019-02-20 09:00:01 +10:00

nvkm

drm/nouveau/i2c: Disable i2c bus access after ->fini()

2019-05-01 11:08:39 +10:00