forked from Minki/linux
8965ad8433
Komeda HW can support dual-link which splits display frame to two halves
(left/link0, right/link1) and output them by two output links.
Due to the halved pixel rate of each link, the pxlclk of dual-link can be
reduced two times compare with single-link.
For enabling dual-link:
- The DT need to configure two output-links for the pipeline node.
- Komeda enable dual-link when both link0 and link1 have been connected.
Example of how the pipeline node will look like for dual-link setup
pipe0: pipeline@0 {
clocks = <&fpgaosc2>;
clock-names = "pxclk";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
dp0_pipe0_link0: endpoint@0 {
reg = <0>;
remote-endpoint = <&dlink_connector_in0>;
};
dp0_pipe0_link1: endpoint@1 {
reg = <1>;
remote-endpoint = <&dlink_connector_in1>;
};
};
};
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081013.13638-3-james.qian.wang@arm.com
|
||
|---|---|---|
| .. | ||
| display | ||
| hdlcd_crtc.c | ||
| hdlcd_drv.c | ||
| hdlcd_drv.h | ||
| hdlcd_regs.h | ||
| Kconfig | ||
| Makefile | ||
| malidp_crtc.c | ||
| malidp_drv.c | ||
| malidp_drv.h | ||
| malidp_hw.c | ||
| malidp_hw.h | ||
| malidp_mw.c | ||
| malidp_mw.h | ||
| malidp_planes.c | ||
| malidp_regs.h | ||