..
accel
iio: mma8452: mark expected switch fall-through
2019-04-04 20:19:41 +01:00
adc
iio: adc: ti-ads7950: Fix improper use of mlock
2019-04-04 20:19:41 +01:00
afe
iio: afe: rescale: new driver
2018-04-28 18:03:22 +01:00
amplifiers
drivers: iio: Update MODULE AUTHOR email address
2018-08-19 17:23:39 +01:00
buffer
iio:kfifo_buf: check for uint overflow
2018-03-30 11:16:12 +01:00
chemical
iio: chemical: pms7003: extend supported sensors list
2019-04-04 20:19:40 +01:00
common
iio: hid-sensor-hub: clean up indentation, remove extraneous tab
2018-11-25 14:03:59 +00:00
counter
iio: 104-quad-8: Provide defines for magic numbers
2018-06-10 11:52:30 +01:00
dac
iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
2019-02-09 18:46:02 +00:00
dummy
iio:dummy: Add extra paragraphs on Kconfig
2018-03-03 15:20:16 +00:00
frequency
iio: ad9523: fix a missing check of return value
2019-01-05 16:10:50 +00:00
gyro
iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
2018-11-16 11:42:12 +00:00
health
iio: health: max30102: Mark expected switch fall-throughs
2018-08-19 17:21:35 +01:00
humidity
iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
2018-11-16 11:42:12 +00:00
imu
iio: imu: adis16480: Calculate the sampling frequency in a generic way
2019-04-04 20:19:43 +01:00
light
iio: light: add driver for MAX44009
2019-02-02 15:47:46 +00:00
magnetometer
iio: magnetometer: mag3110: add vdd/vddio regulator operation support
2019-01-12 19:00:23 +00:00
multiplexer
iio: multiplexer: switch to SPDX license identifier
2018-08-20 19:28:26 +01:00
orientation
iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
2018-11-16 11:42:12 +00:00
potentiometer
iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
2018-11-25 12:35:26 +00:00
potentiostat
iio: potentiostat: lmp91000: add LMP91002 support
2018-05-12 11:02:44 +01:00
pressure
iio:st_pressure:initial lps22hh sensor support
2019-01-19 17:32:41 +00:00
proximity
iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
2018-09-22 16:42:56 +01:00
resolver
staging:iio:ad2s90: Move out of staging
2018-12-01 15:40:39 +00:00
temperature
iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
2018-11-16 11:42:12 +00:00
trigger
iio: remove redundant unlikely annotation
2019-04-04 20:19:40 +01:00
iio_core_trigger.h
iio_core.h
the rest of drivers/*: annotate ->poll() instances
2017-11-28 11:06:58 -05:00
industrialio-buffer.c
First round of IIO fixes for the 4.16 cycle.
2018-02-20 10:03:22 +01:00
industrialio-configfs.c
industrialio-core.c
iio: add IIO_MASSCONCENTRATION channel type
2018-12-16 14:05:57 +00:00
industrialio-event.c
vfs: do bulk POLL* -> EPOLL* replacement
2018-02-11 14:34:03 -08:00
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c
iio: trigger: Print an error if there is no available irq
2019-04-04 20:19:41 +01:00
industrialio-triggered-event.c
inkern.c
treewide: kzalloc() -> kcalloc()
2018-06-12 16:19:22 -07:00
Kconfig
staging: iio: ad2s1200: Move driver out of staging
2018-05-20 12:17:48 +01:00
Makefile
staging: iio: ad2s1200: Move driver out of staging
2018-05-20 12:17:48 +01:00