forked from Minki/linux
e03f9088e2
Add r8a7779 specific support for IRLM bit configuration in the INTC-IRQPIN driver. Without this code we need special workaround code in arch/arm/mach-shmobile. The IRLM bit for the INTC hardware exists on various older SH-based SoCs and is used to select between two modes for the external interrupt pins IRQ0 to IRQ3: IRLM = 0: (default from reset on r8a7779) In this mode the pins IRQ0 to IRQ3 are used together to give a value between 0 and 15 to the SoC. External logic is required for masking. This mode is not supported by the INTC-IRQPIN driver. IRLM = 1: (needs this patch or configuration elsewhere) In this mode IRQ0 to IRQ3 operate as 4 individual external interrupt pins. In this mode the SMSC ethernet chip can be used via IRQ1 on r8a7779 Marzen. This mode is the only supported mode by the INTC-IRQPIN driver. For this patch to work the r8a7779 DTS needs to pass the ICR0 register as the last register bank. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: horms@verge.net.au Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/20141203121803.5936.35881.sendpatchset@w520 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|---|---|---|
| .. | ||
| bindings | ||
| 00-INDEX | ||
| booting-without-of.txt | ||
| changesets.txt | ||
| dynamic-resolution-notes.txt | ||
| of_selftest.txt | ||
| overlay-notes.txt | ||
| todo.txt | ||
| usage-model.txt | ||