forked from Minki/linux
ffe3150125
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUHPmWhOxKuMESys7AQLCZRAAsZAuAK0MxZ4iuq/+fmy7Uxb1jrzLOYSb 3UgbTgXAjR0WAUHNegVZLX1Xc+12KxvMCj/8sO62Ai+wtgHeDAuUl2T0FbSZjlGK qqx/qQqTFHUfJRbm3Lu9iarZ2K49v1kTDk4C+nC8J9mEEW4WFlVPD10n90j+4hxr ZCEYril7qOQQV65oor3BT2V64+X1WDHriTLugH1o8RziRF9jh6Z2hgZAWnThcGxu lPsmXF2e7jDqGcM3gWtxZWu/yTBPxw549R+JUg4aVKho9WI5ClyjNAKnE7wtd3iW HyrylRH+ch2oeYFa5+xoyopRARUUPmujKaHU+ZI1o++eNzuw5JYiwuMlZBLyUc9I foWMSUw31U7695exyf66HiH7GEKI1PVpgJVNu41eJvl0iWSWCpKCB6Gs8Sw4xnp2 auUCYSniXHNTFhFktjNdIUAn0+1X/b/SEfb/id4GvLp1K98QGOfe8dMCC8hEnXiF 4iIViM8Sv1GB1us5huSjbMeRPbZ3x/loqEpApfgcaqcyrUR29FTE/lFQ4fj9xviL JjckPLMMZb4Ho5wrkCi5NtXJ16mx1qKzbBGDdqzmqaNdN+08rNF//kA9m9hCwgD8 XfAV286DKDC0SllZIG+Uz7YLnSZjNAUhjvWN3ipV+SdT5DGybL3uSW5tYiSAzI2E 3cayGTWINMg= =U9Qq -----END PGP SIGNATURE----- Merge tag 'disintegrate-mtd-20121009' of git://git.infradead.org/users/dhowells/linux-headers UAPI Disintegration 2012-10-09 Conflicts: MAINTAINERS arch/arm/configs/bcmring_defconfig arch/arm/mach-imx/clk-imx51-imx53.c drivers/mtd/nand/Kconfig drivers/mtd/nand/bcm_umi_nand.c drivers/mtd/nand/nand_bcm_umi.h drivers/mtd/nand/orion_nand.c
546 lines
14 KiB
Plaintext
546 lines
14 KiB
Plaintext
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/include/ "skeleton.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
gpio5 = &gpio6;
|
|
gpio6 = &gpio7;
|
|
};
|
|
|
|
tzic: tz-interrupt-controller@0fffc000 {
|
|
compatible = "fsl,imx53-tzic", "fsl,tzic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x0fffc000 0x4000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ckil {
|
|
compatible = "fsl,imx-ckil", "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
ckih1 {
|
|
compatible = "fsl,imx-ckih1", "fixed-clock";
|
|
clock-frequency = <22579200>;
|
|
};
|
|
|
|
ckih2 {
|
|
compatible = "fsl,imx-ckih2", "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
osc {
|
|
compatible = "fsl,imx-osc", "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&tzic>;
|
|
ranges;
|
|
|
|
aips@50000000 { /* AIPS1 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x50000000 0x10000000>;
|
|
ranges;
|
|
|
|
spba@50000000 {
|
|
compatible = "fsl,spba-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x50000000 0x40000>;
|
|
ranges;
|
|
|
|
esdhc@50004000 { /* ESDHC1 */
|
|
compatible = "fsl,imx53-esdhc";
|
|
reg = <0x50004000 0x4000>;
|
|
interrupts = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc@50008000 { /* ESDHC2 */
|
|
compatible = "fsl,imx53-esdhc";
|
|
reg = <0x50008000 0x4000>;
|
|
interrupts = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@5000c000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x5000c000 0x4000>;
|
|
interrupts = <33>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi@50010000 { /* ECSPI1 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x50010000 0x4000>;
|
|
interrupts = <36>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi2: ssi@50014000 {
|
|
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
|
|
reg = <0x50014000 0x4000>;
|
|
interrupts = <30>;
|
|
fsl,fifo-depth = <15>;
|
|
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc@50020000 { /* ESDHC3 */
|
|
compatible = "fsl,imx53-esdhc";
|
|
reg = <0x50020000 0x4000>;
|
|
interrupts = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc@50024000 { /* ESDHC4 */
|
|
compatible = "fsl,imx53-esdhc";
|
|
reg = <0x50024000 0x4000>;
|
|
interrupts = <4>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usb@53f80000 {
|
|
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
|
|
reg = <0x53f80000 0x0200>;
|
|
interrupts = <18>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@53f80200 {
|
|
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
|
|
reg = <0x53f80200 0x0200>;
|
|
interrupts = <14>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@53f80400 {
|
|
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
|
|
reg = <0x53f80400 0x0200>;
|
|
interrupts = <16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@53f80600 {
|
|
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
|
|
reg = <0x53f80600 0x0200>;
|
|
interrupts = <17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio1: gpio@53f84000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53f84000 0x4000>;
|
|
interrupts = <50 51>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@53f88000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53f88000 0x4000>;
|
|
interrupts = <52 53>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@53f8c000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53f8c000 0x4000>;
|
|
interrupts = <54 55>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@53f90000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53f90000 0x4000>;
|
|
interrupts = <56 57>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
wdog@53f98000 { /* WDOG1 */
|
|
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
|
|
reg = <0x53f98000 0x4000>;
|
|
interrupts = <58>;
|
|
};
|
|
|
|
wdog@53f9c000 { /* WDOG2 */
|
|
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
|
|
reg = <0x53f9c000 0x4000>;
|
|
interrupts = <59>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iomuxc@53fa8000 {
|
|
compatible = "fsl,imx53-iomuxc";
|
|
reg = <0x53fa8000 0x4000>;
|
|
|
|
audmux {
|
|
pinctrl_audmux_1: audmuxgrp-1 {
|
|
fsl,pins = <
|
|
10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
|
|
17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
|
|
23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
|
|
30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
fec {
|
|
pinctrl_fec_1: fecgrp-1 {
|
|
fsl,pins = <
|
|
820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */
|
|
779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */
|
|
786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
|
|
791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
|
|
796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
|
|
799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
|
|
804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
|
|
808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
|
|
811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
|
|
816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
ecspi1 {
|
|
pinctrl_ecspi1_1: ecspi1grp-1 {
|
|
fsl,pins = <
|
|
433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */
|
|
439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */
|
|
445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */
|
|
>;
|
|
};
|
|
};
|
|
|
|
esdhc1 {
|
|
pinctrl_esdhc1_1: esdhc1grp-1 {
|
|
fsl,pins = <
|
|
995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
|
|
1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
|
|
1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
|
|
1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
|
|
1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
|
|
1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc1_2: esdhc1grp-2 {
|
|
fsl,pins = <
|
|
995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
|
|
1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
|
|
1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
|
|
1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
|
|
941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
|
|
948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
|
|
955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
|
|
962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
|
|
1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
|
|
1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
|
|
>;
|
|
};
|
|
};
|
|
|
|
esdhc2 {
|
|
pinctrl_esdhc2_1: esdhc2grp-1 {
|
|
fsl,pins = <
|
|
1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */
|
|
1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */
|
|
1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
|
|
1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
|
|
1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
|
|
1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
esdhc3 {
|
|
pinctrl_esdhc3_1: esdhc3grp-1 {
|
|
fsl,pins = <
|
|
943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
|
|
950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
|
|
957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
|
|
964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
|
|
893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
|
|
900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
|
|
906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
|
|
912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
|
|
857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
|
|
863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
|
|
>;
|
|
};
|
|
};
|
|
|
|
i2c1 {
|
|
pinctrl_i2c1_1: i2c1grp-1 {
|
|
fsl,pins = <
|
|
333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */
|
|
341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */
|
|
>;
|
|
};
|
|
};
|
|
|
|
i2c2 {
|
|
pinctrl_i2c2_1: i2c2grp-1 {
|
|
fsl,pins = <
|
|
61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */
|
|
53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */
|
|
>;
|
|
};
|
|
};
|
|
|
|
uart1 {
|
|
pinctrl_uart1_1: uart1grp-1 {
|
|
fsl,pins = <
|
|
346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
|
|
354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1_2: uart1grp-2 {
|
|
fsl,pins = <
|
|
828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
|
|
832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
|
|
>;
|
|
};
|
|
};
|
|
|
|
uart2 {
|
|
pinctrl_uart2_1: uart2grp-1 {
|
|
fsl,pins = <
|
|
841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
|
|
836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
|
|
>;
|
|
};
|
|
};
|
|
|
|
uart3 {
|
|
pinctrl_uart3_1: uart3grp-1 {
|
|
fsl,pins = <
|
|
884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
|
|
888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
|
|
875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */
|
|
880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
uart1: serial@53fbc000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x53fbc000 0x4000>;
|
|
interrupts = <31>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@53fc0000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x53fc0000 0x4000>;
|
|
interrupts = <32>;
|
|
status = "disabled";
|
|
};
|
|
|
|
can1: can@53fc8000 {
|
|
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
|
|
reg = <0x53fc8000 0x4000>;
|
|
interrupts = <82>;
|
|
status = "disabled";
|
|
};
|
|
|
|
can2: can@53fcc000 {
|
|
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
|
|
reg = <0x53fcc000 0x4000>;
|
|
interrupts = <83>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio5: gpio@53fdc000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53fdc000 0x4000>;
|
|
interrupts = <103 104>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio6: gpio@53fe0000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53fe0000 0x4000>;
|
|
interrupts = <105 106>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio7: gpio@53fe4000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53fe4000 0x4000>;
|
|
interrupts = <107 108>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
i2c@53fec000 { /* I2C3 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
|
|
reg = <0x53fec000 0x4000>;
|
|
interrupts = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@53ff0000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x53ff0000 0x4000>;
|
|
interrupts = <13>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
aips@60000000 { /* AIPS2 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x60000000 0x10000000>;
|
|
ranges;
|
|
|
|
uart5: serial@63f90000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x63f90000 0x4000>;
|
|
interrupts = <86>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi@63fac000 { /* ECSPI2 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x63fac000 0x4000>;
|
|
interrupts = <37>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdma@63fb0000 {
|
|
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
|
|
reg = <0x63fb0000 0x4000>;
|
|
interrupts = <6>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
|
|
};
|
|
|
|
cspi@63fc0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
|
|
reg = <0x63fc0000 0x4000>;
|
|
interrupts = <38>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@63fc4000 { /* I2C2 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
|
|
reg = <0x63fc4000 0x4000>;
|
|
interrupts = <63>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@63fc8000 { /* I2C1 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
|
|
reg = <0x63fc8000 0x4000>;
|
|
interrupts = <62>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi1: ssi@63fcc000 {
|
|
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
|
|
reg = <0x63fcc000 0x4000>;
|
|
interrupts = <29>;
|
|
fsl,fifo-depth = <15>;
|
|
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
|
|
status = "disabled";
|
|
};
|
|
|
|
audmux@63fd0000 {
|
|
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
|
|
reg = <0x63fd0000 0x4000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
nand@63fdb000 {
|
|
compatible = "fsl,imx53-nand";
|
|
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
|
|
interrupts = <8>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi3: ssi@63fe8000 {
|
|
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
|
|
reg = <0x63fe8000 0x4000>;
|
|
interrupts = <96>;
|
|
fsl,fifo-depth = <15>;
|
|
fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
|
|
status = "disabled";
|
|
};
|
|
|
|
ethernet@63fec000 {
|
|
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
|
|
reg = <0x63fec000 0x4000>;
|
|
interrupts = <87>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
};
|