forked from Minki/linux
46c5338db7
The cortina/gemini SL3516 SoC has a crypto IP name either (crypto engine/crypto acceleration engine in the datasheet). It support many algorithms like [AES|DES|3DES][ECB|CBC], SHA1, MD5 and some HMAC. This patch adds the core files and support for ecb(aes) and the RNG. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
348 lines
10 KiB
C
348 lines
10 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* sl3516-ce.h - hardware cryptographic offloader for cortina/gemini SoC
|
|
*
|
|
* Copyright (C) 2021 Corentin LABBE <clabbe@baylibre.com>
|
|
*
|
|
* General notes on this driver:
|
|
* Called either Crypto Acceleration Engine Module, Security Acceleration Engine
|
|
* or IPSEC module in the datasheet, it will be called Crypto Engine for short
|
|
* in this driver.
|
|
* The CE was designed to handle IPSEC and wifi(TKIP WEP) protocol.
|
|
* It can handle AES, DES, 3DES, MD5, WEP, TKIP, SHA1, HMAC(MD5), HMAC(SHA1),
|
|
* Michael cipher/digest suites.
|
|
* It acts the same as a network hw, with both RX and TX chained descriptors.
|
|
*/
|
|
#include <crypto/aes.h>
|
|
#include <crypto/engine.h>
|
|
#include <crypto/scatterwalk.h>
|
|
#include <crypto/skcipher.h>
|
|
#include <linux/crypto.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/hw_random.h>
|
|
|
|
#define TQ0_TYPE_DATA 0
|
|
#define TQ0_TYPE_CTRL BIT(0)
|
|
#define TQ1_CIPHER BIT(1)
|
|
#define TQ2_AUTH BIT(2)
|
|
#define TQ3_IV BIT(3)
|
|
#define TQ4_KEY0 BIT(4)
|
|
#define TQ5_KEY4 BIT(5)
|
|
#define TQ6_KEY6 BIT(6)
|
|
#define TQ7_AKEY0 BIT(7)
|
|
#define TQ8_AKEY2 BIT(8)
|
|
#define TQ9_AKEY2 BIT(9)
|
|
|
|
#define ECB_AES 0x2
|
|
|
|
#define DESC_LAST 0x01
|
|
#define DESC_FIRST 0x02
|
|
|
|
#define IPSEC_ID 0x0000
|
|
#define IPSEC_STATUS_REG 0x00a8
|
|
#define IPSEC_RAND_NUM_REG 0x00ac
|
|
#define IPSEC_DMA_DEVICE_ID 0xff00
|
|
#define IPSEC_DMA_STATUS 0xff04
|
|
#define IPSEC_TXDMA_CTRL 0xff08
|
|
#define IPSEC_TXDMA_FIRST_DESC 0xff0c
|
|
#define IPSEC_TXDMA_CURR_DESC 0xff10
|
|
#define IPSEC_RXDMA_CTRL 0xff14
|
|
#define IPSEC_RXDMA_FIRST_DESC 0xff18
|
|
#define IPSEC_RXDMA_CURR_DESC 0xff1c
|
|
#define IPSEC_TXDMA_BUF_ADDR 0xff28
|
|
#define IPSEC_RXDMA_BUF_ADDR 0xff38
|
|
#define IPSEC_RXDMA_BUF_SIZE 0xff30
|
|
|
|
#define CE_ENCRYPTION 0x01
|
|
#define CE_DECRYPTION 0x03
|
|
|
|
#define MAXDESC 6
|
|
|
|
#define DMA_STATUS_RS_EOFI BIT(22)
|
|
#define DMA_STATUS_RS_PERR BIT(24)
|
|
#define DMA_STATUS_RS_DERR BIT(25)
|
|
#define DMA_STATUS_TS_EOFI BIT(27)
|
|
#define DMA_STATUS_TS_PERR BIT(29)
|
|
#define DMA_STATUS_TS_DERR BIT(30)
|
|
|
|
#define TXDMA_CTRL_START BIT(31)
|
|
#define TXDMA_CTRL_CONTINUE BIT(30)
|
|
#define TXDMA_CTRL_CHAIN_MODE BIT(29)
|
|
/* the burst value is not documented in the datasheet */
|
|
#define TXDMA_CTRL_BURST_UNK BIT(22)
|
|
#define TXDMA_CTRL_INT_FAIL BIT(17)
|
|
#define TXDMA_CTRL_INT_PERR BIT(16)
|
|
|
|
#define RXDMA_CTRL_START BIT(31)
|
|
#define RXDMA_CTRL_CONTINUE BIT(30)
|
|
#define RXDMA_CTRL_CHAIN_MODE BIT(29)
|
|
/* the burst value is not documented in the datasheet */
|
|
#define RXDMA_CTRL_BURST_UNK BIT(22)
|
|
#define RXDMA_CTRL_INT_FINISH BIT(18)
|
|
#define RXDMA_CTRL_INT_FAIL BIT(17)
|
|
#define RXDMA_CTRL_INT_PERR BIT(16)
|
|
#define RXDMA_CTRL_INT_EOD BIT(15)
|
|
#define RXDMA_CTRL_INT_EOF BIT(14)
|
|
|
|
#define CE_CPU 0
|
|
#define CE_DMA 1
|
|
|
|
/*
|
|
* struct sl3516_ce_descriptor - descriptor for CE operations
|
|
* @frame_ctrl: Information for the current descriptor
|
|
* @flag_status: For send packet, describe flag of operations.
|
|
* @buf_adr: pointer to a send/recv buffer for data packet
|
|
* @next_desc: control linking to other descriptors
|
|
*/
|
|
struct descriptor {
|
|
union {
|
|
u32 raw;
|
|
/*
|
|
* struct desc_frame_ctrl - Information for the current descriptor
|
|
* @buffer_size: the size of buffer at buf_adr
|
|
* @desc_count: Upon completion of a DMA operation, DMA
|
|
* write the number of descriptors used
|
|
* for the current frame
|
|
* @checksum: unknown
|
|
* @authcomp: unknown
|
|
* @perr: Protocol error during processing this descriptor
|
|
* @derr: Data error during processing this descriptor
|
|
* @own: 0 if owned by CPU, 1 for DMA
|
|
*/
|
|
struct desc_frame_ctrl {
|
|
u32 buffer_size :16;
|
|
u32 desc_count :6;
|
|
u32 checksum :6;
|
|
u32 authcomp :1;
|
|
u32 perr :1;
|
|
u32 derr :1;
|
|
u32 own :1;
|
|
} bits;
|
|
} frame_ctrl;
|
|
|
|
union {
|
|
u32 raw;
|
|
/*
|
|
* struct desc_flag_status - flag for this descriptor
|
|
* @tqflag: list of flag describing the type of operation
|
|
* to be performed.
|
|
*/
|
|
struct desc_tx_flag_status {
|
|
u32 tqflag :10;
|
|
u32 unused :22;
|
|
} tx_flag;
|
|
} flag_status;
|
|
|
|
u32 buf_adr;
|
|
|
|
union {
|
|
u32 next_descriptor;
|
|
/*
|
|
* struct desc_next - describe chaining of descriptors
|
|
* @sof_eof: does the descriptor is first (0x11),
|
|
* the last (0x01), middle of a chan (0x00)
|
|
* or the only one (0x11)
|
|
* @dec: AHB bus address increase (0), decrease (1)
|
|
* @eofie: End of frame interrupt enable
|
|
* @ndar: Next descriptor address
|
|
*/
|
|
struct desc_next {
|
|
u32 sof_eof :2;
|
|
u32 dec :1;
|
|
u32 eofie :1;
|
|
u32 ndar :28;
|
|
} bits;
|
|
} next_desc;
|
|
};
|
|
|
|
/*
|
|
* struct control - The value of this register is used to set the
|
|
* operation mode of the IPSec Module.
|
|
* @process_id: Used to identify the process. The number will be copied
|
|
* to the descriptor status of the received packet.
|
|
* @auth_check_len: Number of 32-bit words to be checked or appended by the
|
|
* authentication module
|
|
* @auth_algorithm:
|
|
* @auth_mode: 0:append 1:Check Authentication Result
|
|
* @fcs_stream_copy: 0:enable 1:disable authentication stream copy
|
|
* @mix_key_sel: 0:use rCipherKey0-3 1:use Key Mixer
|
|
* @aesnk: AES Key Size
|
|
* @cipher_algorithm: choice of CBC/ECE and AES/DES/3DES
|
|
* @op_mode: Operation Mode for the IPSec Module
|
|
*/
|
|
struct pkt_control_header {
|
|
u32 process_id :8;
|
|
u32 auth_check_len :3;
|
|
u32 un1 :1;
|
|
u32 auth_algorithm :3;
|
|
u32 auth_mode :1;
|
|
u32 fcs_stream_copy :1;
|
|
u32 un2 :2;
|
|
u32 mix_key_sel :1;
|
|
u32 aesnk :4;
|
|
u32 cipher_algorithm :3;
|
|
u32 un3 :1;
|
|
u32 op_mode :4;
|
|
};
|
|
|
|
struct pkt_control_cipher {
|
|
u32 algorithm_len :16;
|
|
u32 header_len :16;
|
|
};
|
|
|
|
/*
|
|
* struct pkt_control_ecb - control packet for ECB
|
|
*/
|
|
struct pkt_control_ecb {
|
|
struct pkt_control_header control;
|
|
struct pkt_control_cipher cipher;
|
|
unsigned char key[AES_MAX_KEY_SIZE];
|
|
};
|
|
|
|
/*
|
|
* struct sl3516_ce_dev - main container for all this driver information
|
|
* @base: base address
|
|
* @clks: clocks used
|
|
* @reset: pointer to reset controller
|
|
* @dev: the platform device
|
|
* @engine: ptr to the crypto/crypto_engine
|
|
* @complete: completion for the current task on this flow
|
|
* @status: set to 1 by interrupt if task is done
|
|
* @dtx: base DMA address for TX descriptors
|
|
* @tx base address of TX descriptors
|
|
* @drx: base DMA address for RX descriptors
|
|
* @rx base address of RX descriptors
|
|
* @ctx current used TX descriptor
|
|
* @crx current used RX descriptor
|
|
* @trng hw_random structure for RNG
|
|
* @hwrng_stat_req number of HWRNG requests
|
|
* @hwrng_stat_bytes total number of bytes generated by RNG
|
|
* @stat_irq number of IRQ handled by CE
|
|
* @stat_irq_tx number of TX IRQ handled by CE
|
|
* @stat_irq_rx number of RX IRQ handled by CE
|
|
* @stat_req number of requests handled by CE
|
|
* @fallbak_sg_count_tx number of fallback due to destination SG count
|
|
* @fallbak_sg_count_rx number of fallback due to source SG count
|
|
* @fallbak_not_same_len number of fallback due to difference in SG length
|
|
* @dbgfs_dir: Debugfs dentry for statistic directory
|
|
* @dbgfs_stats: Debugfs dentry for statistic counters
|
|
*/
|
|
struct sl3516_ce_dev {
|
|
void __iomem *base;
|
|
struct clk *clks;
|
|
struct reset_control *reset;
|
|
struct device *dev;
|
|
struct crypto_engine *engine;
|
|
struct completion complete;
|
|
int status;
|
|
dma_addr_t dtx;
|
|
struct descriptor *tx;
|
|
dma_addr_t drx;
|
|
struct descriptor *rx;
|
|
int ctx;
|
|
int crx;
|
|
struct hwrng trng;
|
|
unsigned long hwrng_stat_req;
|
|
unsigned long hwrng_stat_bytes;
|
|
unsigned long stat_irq;
|
|
unsigned long stat_irq_tx;
|
|
unsigned long stat_irq_rx;
|
|
unsigned long stat_req;
|
|
unsigned long fallback_sg_count_tx;
|
|
unsigned long fallback_sg_count_rx;
|
|
unsigned long fallback_not_same_len;
|
|
unsigned long fallback_mod16;
|
|
unsigned long fallback_align16;
|
|
#ifdef CONFIG_CRYPTO_DEV_SL3516_DEBUG
|
|
struct dentry *dbgfs_dir;
|
|
struct dentry *dbgfs_stats;
|
|
#endif
|
|
void *pctrl;
|
|
dma_addr_t dctrl;
|
|
};
|
|
|
|
struct sginfo {
|
|
u32 addr;
|
|
u32 len;
|
|
};
|
|
|
|
/*
|
|
* struct sl3516_ce_cipher_req_ctx - context for a skcipher request
|
|
* @t_src: list of mapped SGs with their size
|
|
* @t_dst: list of mapped SGs with their size
|
|
* @op_dir: direction (encrypt vs decrypt) for this request
|
|
* @pctrllen: the length of the ctrl packet
|
|
* @tqflag: the TQflag to set in data packet
|
|
* @h pointer to the pkt_control_cipher header
|
|
* @nr_sgs: number of source SG
|
|
* @nr_sgd: number of destination SG
|
|
* @fallback_req: request struct for invoking the fallback skcipher TFM
|
|
*/
|
|
struct sl3516_ce_cipher_req_ctx {
|
|
struct sginfo t_src[MAXDESC];
|
|
struct sginfo t_dst[MAXDESC];
|
|
u32 op_dir;
|
|
unsigned int pctrllen;
|
|
u32 tqflag;
|
|
struct pkt_control_cipher *h;
|
|
int nr_sgs;
|
|
int nr_sgd;
|
|
struct skcipher_request fallback_req; // keep at the end
|
|
};
|
|
|
|
/*
|
|
* struct sl3516_ce_cipher_tfm_ctx - context for a skcipher TFM
|
|
* @enginectx: crypto_engine used by this TFM
|
|
* @key: pointer to key data
|
|
* @keylen: len of the key
|
|
* @ce: pointer to the private data of driver handling this TFM
|
|
* @fallback_tfm: pointer to the fallback TFM
|
|
*
|
|
* enginectx must be the first element
|
|
*/
|
|
struct sl3516_ce_cipher_tfm_ctx {
|
|
struct crypto_engine_ctx enginectx;
|
|
u32 *key;
|
|
u32 keylen;
|
|
struct sl3516_ce_dev *ce;
|
|
struct crypto_skcipher *fallback_tfm;
|
|
};
|
|
|
|
/*
|
|
* struct sl3516_ce_alg_template - crypto_alg template
|
|
* @type: the CRYPTO_ALG_TYPE for this template
|
|
* @mode: value to be used in control packet for this algorithm
|
|
* @ce: pointer to the sl3516_ce_dev structure associated with
|
|
* this template
|
|
* @alg: one of sub struct must be used
|
|
* @stat_req: number of request done on this template
|
|
* @stat_fb: number of request which has fallbacked
|
|
* @stat_bytes: total data size done by this template
|
|
*/
|
|
struct sl3516_ce_alg_template {
|
|
u32 type;
|
|
u32 mode;
|
|
struct sl3516_ce_dev *ce;
|
|
union {
|
|
struct skcipher_alg skcipher;
|
|
} alg;
|
|
unsigned long stat_req;
|
|
unsigned long stat_fb;
|
|
unsigned long stat_bytes;
|
|
};
|
|
|
|
int sl3516_ce_enqueue(struct crypto_async_request *areq, u32 type);
|
|
|
|
int sl3516_ce_aes_setkey(struct crypto_skcipher *tfm, const u8 *key,
|
|
unsigned int keylen);
|
|
int sl3516_ce_cipher_init(struct crypto_tfm *tfm);
|
|
void sl3516_ce_cipher_exit(struct crypto_tfm *tfm);
|
|
int sl3516_ce_skdecrypt(struct skcipher_request *areq);
|
|
int sl3516_ce_skencrypt(struct skcipher_request *areq);
|
|
|
|
int sl3516_ce_run_task(struct sl3516_ce_dev *ce,
|
|
struct sl3516_ce_cipher_req_ctx *rctx, const char *name);
|
|
|
|
int sl3516_ce_rng_register(struct sl3516_ce_dev *ce);
|
|
void sl3516_ce_rng_unregister(struct sl3516_ce_dev *ce);
|