forked from Minki/linux
5214cae77c
Here is the quote from [1]:
The unit-address must match the first address specified
in the reg property of the node. If the node has no reg property,
the @ and unit-address must be omitted and the node-name alone
differentiates the node from other nodes at the same level
This patch adjusts MIPS dts-files and devicetree binding
documentation in accordance with [1].
[1] Power.org(tm) Standard for Embedded Power Architecture(tm)
Platform Requirements (ePAPR). Version 1.1 – 08 April 2011.
Chapter 2.2.1.1 Node Name Requirements
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13345/
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
48 lines
1.1 KiB
Plaintext
48 lines
1.1 KiB
Plaintext
MIPS CPU interrupt controller
|
|
|
|
On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
|
|
IRQs from a devicetree file and create a irq_domain for IRQ controller.
|
|
|
|
With the irq_domain in place we can describe how the 8 IRQs are wired to the
|
|
platforms internal interrupt controller cascade.
|
|
|
|
Below is an example of a platform describing the cascade inside the devicetree
|
|
and the code used to load it inside arch_init_irq().
|
|
|
|
Required properties:
|
|
- compatible : Should be "mti,cpu-interrupt-controller"
|
|
|
|
Example devicetree:
|
|
cpu-irq: cpu-irq {
|
|
#address-cells = <0>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
};
|
|
|
|
intc: intc@200 {
|
|
compatible = "ralink,rt2880-intc";
|
|
reg = <0x200 0x100>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpu-irq>;
|
|
interrupts = <2>;
|
|
};
|
|
|
|
|
|
Example platform irq.c:
|
|
static struct of_device_id __initdata of_irq_ids[] = {
|
|
{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
|
|
{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
|
|
{},
|
|
};
|
|
|
|
void __init arch_init_irq(void)
|
|
{
|
|
of_irq_init(of_irq_ids);
|
|
}
|