forked from Minki/linux
c9f3f2d8b3
Correct typo (double words) in documentations. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
51 lines
1.7 KiB
Plaintext
51 lines
1.7 KiB
Plaintext
ARM Versatile Express system registers
|
|
--------------------------------------
|
|
|
|
This is a system control registers block, providing multiple low level
|
|
platform functions like board detection and identification, software
|
|
interrupt generation, MMC and NOR Flash control etc.
|
|
|
|
Required node properties:
|
|
- compatible value : = "arm,vexpress,sysreg";
|
|
- reg : physical base address and the size of the registers window
|
|
- gpio-controller : specifies that the node is a GPIO controller
|
|
- #gpio-cells : size of the GPIO specifier, should be 2:
|
|
- first cell is the pseudo-GPIO line number:
|
|
0 - MMC CARDIN
|
|
1 - MMC WPROT
|
|
2 - NOR FLASH WPn
|
|
- second cell can take standard GPIO flags (currently ignored).
|
|
|
|
Example:
|
|
v2m_sysreg: sysreg@10000000 {
|
|
compatible = "arm,vexpress-sysreg";
|
|
reg = <0x10000000 0x1000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
This block also can also act a bridge to the platform's configuration
|
|
bus via "system control" interface, addressing devices with site number,
|
|
position in the board stack, config controller, function and device
|
|
numbers - see motherboard's TRM for more details.
|
|
|
|
The node describing a config device must refer to the sysreg node via
|
|
"arm,vexpress,config-bridge" phandle (can be also defined in the node's
|
|
parent) and relies on the board topology properties - see main vexpress
|
|
node documentation for more details. It must also define the following
|
|
property:
|
|
- arm,vexpress-sysreg,func : must contain two cells:
|
|
- first cell defines function number (eg. 1 for clock generator,
|
|
2 for voltage regulators etc.)
|
|
- device number (eg. osc 0, osc 1 etc.)
|
|
|
|
Example:
|
|
mcc {
|
|
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
|
|
|
osc@0 {
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 0>;
|
|
};
|
|
};
|