forked from Minki/linux
8ffea6eef4
The existing width field used to check divider validity does not provide enough protection against bad values. For example, if max divider value is 4, the smallest all-1 bitmask that can hold this value is 7, which allows values higher than 4 to be used. This typically causes unpredictable results with hardware. So far this issue hasn't been noticed as most of the dividers actually have maximum values which fit the whole bitfield, but there are certain clocks for which this is a problem, like dpll4_m4 divider on omap3 devices. Thus, convert the whole validity logic to use min,max and mask values for determining if a specific divider is valid or not. This prevents the odd cases where bad value would otherwise be written to a divider config register. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Adam Ford <aford173@gmail.com>
574 lines
13 KiB
C
574 lines
13 KiB
C
/*
|
|
* TI Divider Clock
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments, Inc.
|
|
*
|
|
* Tero Kristo <t-kristo@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/clk/ti.h>
|
|
#include "clock.h"
|
|
|
|
#undef pr_fmt
|
|
#define pr_fmt(fmt) "%s: " fmt, __func__
|
|
|
|
static unsigned int _get_table_div(const struct clk_div_table *table,
|
|
unsigned int val)
|
|
{
|
|
const struct clk_div_table *clkt;
|
|
|
|
for (clkt = table; clkt->div; clkt++)
|
|
if (clkt->val == val)
|
|
return clkt->div;
|
|
return 0;
|
|
}
|
|
|
|
static void _setup_mask(struct clk_omap_divider *divider)
|
|
{
|
|
u16 mask;
|
|
u32 max_val;
|
|
const struct clk_div_table *clkt;
|
|
|
|
if (divider->table) {
|
|
max_val = 0;
|
|
|
|
for (clkt = divider->table; clkt->div; clkt++)
|
|
if (clkt->val > max_val)
|
|
max_val = clkt->val;
|
|
} else {
|
|
max_val = divider->max;
|
|
|
|
if (!(divider->flags & CLK_DIVIDER_ONE_BASED) &&
|
|
!(divider->flags & CLK_DIVIDER_POWER_OF_TWO))
|
|
max_val--;
|
|
}
|
|
|
|
if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
|
|
mask = fls(max_val) - 1;
|
|
else
|
|
mask = max_val;
|
|
|
|
divider->mask = (1 << fls(mask)) - 1;
|
|
}
|
|
|
|
static unsigned int _get_div(struct clk_omap_divider *divider, unsigned int val)
|
|
{
|
|
if (divider->flags & CLK_DIVIDER_ONE_BASED)
|
|
return val;
|
|
if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
|
|
return 1 << val;
|
|
if (divider->table)
|
|
return _get_table_div(divider->table, val);
|
|
return val + 1;
|
|
}
|
|
|
|
static unsigned int _get_table_val(const struct clk_div_table *table,
|
|
unsigned int div)
|
|
{
|
|
const struct clk_div_table *clkt;
|
|
|
|
for (clkt = table; clkt->div; clkt++)
|
|
if (clkt->div == div)
|
|
return clkt->val;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int _get_val(struct clk_omap_divider *divider, u8 div)
|
|
{
|
|
if (divider->flags & CLK_DIVIDER_ONE_BASED)
|
|
return div;
|
|
if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
|
|
return __ffs(div);
|
|
if (divider->table)
|
|
return _get_table_val(divider->table, div);
|
|
return div - 1;
|
|
}
|
|
|
|
static unsigned long ti_clk_divider_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_omap_divider *divider = to_clk_omap_divider(hw);
|
|
unsigned int div, val;
|
|
|
|
val = ti_clk_ll_ops->clk_readl(÷r->reg) >> divider->shift;
|
|
val &= divider->mask;
|
|
|
|
div = _get_div(divider, val);
|
|
if (!div) {
|
|
WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO),
|
|
"%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
|
|
clk_hw_get_name(hw));
|
|
return parent_rate;
|
|
}
|
|
|
|
return DIV_ROUND_UP(parent_rate, div);
|
|
}
|
|
|
|
/*
|
|
* The reverse of DIV_ROUND_UP: The maximum number which
|
|
* divided by m is r
|
|
*/
|
|
#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
|
|
|
|
static bool _is_valid_table_div(const struct clk_div_table *table,
|
|
unsigned int div)
|
|
{
|
|
const struct clk_div_table *clkt;
|
|
|
|
for (clkt = table; clkt->div; clkt++)
|
|
if (clkt->div == div)
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static bool _is_valid_div(struct clk_omap_divider *divider, unsigned int div)
|
|
{
|
|
if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
|
|
return is_power_of_2(div);
|
|
if (divider->table)
|
|
return _is_valid_table_div(divider->table, div);
|
|
return true;
|
|
}
|
|
|
|
static int _div_round_up(const struct clk_div_table *table,
|
|
unsigned long parent_rate, unsigned long rate)
|
|
{
|
|
const struct clk_div_table *clkt;
|
|
int up = INT_MAX;
|
|
int div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
|
|
|
|
for (clkt = table; clkt->div; clkt++) {
|
|
if (clkt->div == div)
|
|
return clkt->div;
|
|
else if (clkt->div < div)
|
|
continue;
|
|
|
|
if ((clkt->div - div) < (up - div))
|
|
up = clkt->div;
|
|
}
|
|
|
|
return up;
|
|
}
|
|
|
|
static int _div_round(const struct clk_div_table *table,
|
|
unsigned long parent_rate, unsigned long rate)
|
|
{
|
|
if (!table)
|
|
return DIV_ROUND_UP(parent_rate, rate);
|
|
|
|
return _div_round_up(table, parent_rate, rate);
|
|
}
|
|
|
|
static int ti_clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *best_parent_rate)
|
|
{
|
|
struct clk_omap_divider *divider = to_clk_omap_divider(hw);
|
|
int i, bestdiv = 0;
|
|
unsigned long parent_rate, best = 0, now, maxdiv;
|
|
unsigned long parent_rate_saved = *best_parent_rate;
|
|
|
|
if (!rate)
|
|
rate = 1;
|
|
|
|
maxdiv = divider->max;
|
|
|
|
if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
|
|
parent_rate = *best_parent_rate;
|
|
bestdiv = _div_round(divider->table, parent_rate, rate);
|
|
bestdiv = bestdiv == 0 ? 1 : bestdiv;
|
|
bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
|
|
return bestdiv;
|
|
}
|
|
|
|
/*
|
|
* The maximum divider we can use without overflowing
|
|
* unsigned long in rate * i below
|
|
*/
|
|
maxdiv = min(ULONG_MAX / rate, maxdiv);
|
|
|
|
for (i = 1; i <= maxdiv; i++) {
|
|
if (!_is_valid_div(divider, i))
|
|
continue;
|
|
if (rate * i == parent_rate_saved) {
|
|
/*
|
|
* It's the most ideal case if the requested rate can be
|
|
* divided from parent clock without needing to change
|
|
* parent rate, so return the divider immediately.
|
|
*/
|
|
*best_parent_rate = parent_rate_saved;
|
|
return i;
|
|
}
|
|
parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
|
|
MULT_ROUND_UP(rate, i));
|
|
now = DIV_ROUND_UP(parent_rate, i);
|
|
if (now <= rate && now > best) {
|
|
bestdiv = i;
|
|
best = now;
|
|
*best_parent_rate = parent_rate;
|
|
}
|
|
}
|
|
|
|
if (!bestdiv) {
|
|
bestdiv = divider->max;
|
|
*best_parent_rate =
|
|
clk_hw_round_rate(clk_hw_get_parent(hw), 1);
|
|
}
|
|
|
|
return bestdiv;
|
|
}
|
|
|
|
static long ti_clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
int div;
|
|
div = ti_clk_divider_bestdiv(hw, rate, prate);
|
|
|
|
return DIV_ROUND_UP(*prate, div);
|
|
}
|
|
|
|
static int ti_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_omap_divider *divider;
|
|
unsigned int div, value;
|
|
u32 val;
|
|
|
|
if (!hw || !rate)
|
|
return -EINVAL;
|
|
|
|
divider = to_clk_omap_divider(hw);
|
|
|
|
div = DIV_ROUND_UP(parent_rate, rate);
|
|
|
|
if (div > divider->max)
|
|
div = divider->max;
|
|
if (div < divider->min)
|
|
div = divider->min;
|
|
|
|
value = _get_val(divider, div);
|
|
|
|
val = ti_clk_ll_ops->clk_readl(÷r->reg);
|
|
val &= ~(divider->mask << divider->shift);
|
|
val |= value << divider->shift;
|
|
ti_clk_ll_ops->clk_writel(val, ÷r->reg);
|
|
|
|
ti_clk_latch(÷r->reg, divider->latch);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* clk_divider_save_context - Save the divider value
|
|
* @hw: pointer struct clk_hw
|
|
*
|
|
* Save the divider value
|
|
*/
|
|
static int clk_divider_save_context(struct clk_hw *hw)
|
|
{
|
|
struct clk_omap_divider *divider = to_clk_omap_divider(hw);
|
|
u32 val;
|
|
|
|
val = ti_clk_ll_ops->clk_readl(÷r->reg) >> divider->shift;
|
|
divider->context = val & divider->mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* clk_divider_restore_context - restore the saved the divider value
|
|
* @hw: pointer struct clk_hw
|
|
*
|
|
* Restore the saved the divider value
|
|
*/
|
|
static void clk_divider_restore_context(struct clk_hw *hw)
|
|
{
|
|
struct clk_omap_divider *divider = to_clk_omap_divider(hw);
|
|
u32 val;
|
|
|
|
val = ti_clk_ll_ops->clk_readl(÷r->reg);
|
|
val &= ~(divider->mask << divider->shift);
|
|
val |= divider->context << divider->shift;
|
|
ti_clk_ll_ops->clk_writel(val, ÷r->reg);
|
|
}
|
|
|
|
const struct clk_ops ti_clk_divider_ops = {
|
|
.recalc_rate = ti_clk_divider_recalc_rate,
|
|
.round_rate = ti_clk_divider_round_rate,
|
|
.set_rate = ti_clk_divider_set_rate,
|
|
.save_context = clk_divider_save_context,
|
|
.restore_context = clk_divider_restore_context,
|
|
};
|
|
|
|
static struct clk *_register_divider(struct device_node *node,
|
|
u32 flags,
|
|
struct clk_omap_divider *div)
|
|
{
|
|
struct clk *clk;
|
|
struct clk_init_data init;
|
|
const char *parent_name;
|
|
|
|
parent_name = of_clk_get_parent_name(node, 0);
|
|
|
|
init.name = node->name;
|
|
init.ops = &ti_clk_divider_ops;
|
|
init.flags = flags;
|
|
init.parent_names = (parent_name ? &parent_name : NULL);
|
|
init.num_parents = (parent_name ? 1 : 0);
|
|
|
|
div->hw.init = &init;
|
|
|
|
/* register the clock */
|
|
clk = ti_clk_register(NULL, &div->hw, node->name);
|
|
|
|
if (IS_ERR(clk))
|
|
kfree(div);
|
|
|
|
return clk;
|
|
}
|
|
|
|
int ti_clk_parse_divider_data(int *div_table, int num_dividers, int max_div,
|
|
u8 flags, struct clk_omap_divider *divider)
|
|
{
|
|
int valid_div = 0;
|
|
int i;
|
|
struct clk_div_table *tmp;
|
|
u16 min_div = 0;
|
|
|
|
if (!div_table) {
|
|
divider->min = 1;
|
|
divider->max = max_div;
|
|
_setup_mask(divider);
|
|
return 0;
|
|
}
|
|
|
|
i = 0;
|
|
|
|
while (!num_dividers || i < num_dividers) {
|
|
if (div_table[i] == -1)
|
|
break;
|
|
if (div_table[i])
|
|
valid_div++;
|
|
i++;
|
|
}
|
|
|
|
num_dividers = i;
|
|
|
|
tmp = kcalloc(valid_div + 1, sizeof(*tmp), GFP_KERNEL);
|
|
if (!tmp)
|
|
return -ENOMEM;
|
|
|
|
valid_div = 0;
|
|
|
|
for (i = 0; i < num_dividers; i++)
|
|
if (div_table[i] > 0) {
|
|
tmp[valid_div].div = div_table[i];
|
|
tmp[valid_div].val = i;
|
|
valid_div++;
|
|
if (div_table[i] > max_div)
|
|
max_div = div_table[i];
|
|
if (!min_div || div_table[i] < min_div)
|
|
min_div = div_table[i];
|
|
}
|
|
|
|
divider->min = min_div;
|
|
divider->max = max_div;
|
|
divider->table = tmp;
|
|
_setup_mask(divider);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init ti_clk_get_div_table(struct device_node *node,
|
|
struct clk_omap_divider *div)
|
|
{
|
|
struct clk_div_table *table;
|
|
const __be32 *divspec;
|
|
u32 val;
|
|
u32 num_div;
|
|
u32 valid_div;
|
|
int i;
|
|
|
|
divspec = of_get_property(node, "ti,dividers", &num_div);
|
|
|
|
if (!divspec)
|
|
return 0;
|
|
|
|
num_div /= 4;
|
|
|
|
valid_div = 0;
|
|
|
|
/* Determine required size for divider table */
|
|
for (i = 0; i < num_div; i++) {
|
|
of_property_read_u32_index(node, "ti,dividers", i, &val);
|
|
if (val)
|
|
valid_div++;
|
|
}
|
|
|
|
if (!valid_div) {
|
|
pr_err("no valid dividers for %pOFn table\n", node);
|
|
return -EINVAL;
|
|
}
|
|
|
|
table = kcalloc(valid_div + 1, sizeof(*table), GFP_KERNEL);
|
|
if (!table)
|
|
return -ENOMEM;
|
|
|
|
valid_div = 0;
|
|
|
|
for (i = 0; i < num_div; i++) {
|
|
of_property_read_u32_index(node, "ti,dividers", i, &val);
|
|
if (val) {
|
|
table[valid_div].div = val;
|
|
table[valid_div].val = i;
|
|
valid_div++;
|
|
}
|
|
}
|
|
|
|
div->table = table;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _populate_divider_min_max(struct device_node *node,
|
|
struct clk_omap_divider *divider)
|
|
{
|
|
u32 min_div = 0;
|
|
u32 max_div = 0;
|
|
u32 val;
|
|
const struct clk_div_table *clkt;
|
|
|
|
if (!divider->table) {
|
|
/* Clk divider table not provided, determine min/max divs */
|
|
if (of_property_read_u32(node, "ti,min-div", &min_div))
|
|
min_div = 1;
|
|
|
|
if (of_property_read_u32(node, "ti,max-div", &max_div)) {
|
|
pr_err("no max-div for %pOFn!\n", node);
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
|
|
for (clkt = divider->table; clkt->div; clkt++) {
|
|
val = clkt->div;
|
|
if (val > max_div)
|
|
max_div = val;
|
|
if (!min_div || val < min_div)
|
|
min_div = val;
|
|
}
|
|
}
|
|
|
|
divider->min = min_div;
|
|
divider->max = max_div;
|
|
_setup_mask(divider);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init ti_clk_divider_populate(struct device_node *node,
|
|
struct clk_omap_divider *div,
|
|
u32 *flags)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = ti_clk_get_reg_addr(node, 0, &div->reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!of_property_read_u32(node, "ti,bit-shift", &val))
|
|
div->shift = val;
|
|
else
|
|
div->shift = 0;
|
|
|
|
if (!of_property_read_u32(node, "ti,latch-bit", &val))
|
|
div->latch = val;
|
|
else
|
|
div->latch = -EINVAL;
|
|
|
|
*flags = 0;
|
|
div->flags = 0;
|
|
|
|
if (of_property_read_bool(node, "ti,index-starts-at-one"))
|
|
div->flags |= CLK_DIVIDER_ONE_BASED;
|
|
|
|
if (of_property_read_bool(node, "ti,index-power-of-two"))
|
|
div->flags |= CLK_DIVIDER_POWER_OF_TWO;
|
|
|
|
if (of_property_read_bool(node, "ti,set-rate-parent"))
|
|
*flags |= CLK_SET_RATE_PARENT;
|
|
|
|
ret = ti_clk_get_div_table(node, div);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return _populate_divider_min_max(node, div);
|
|
}
|
|
|
|
/**
|
|
* of_ti_divider_clk_setup - Setup function for simple div rate clock
|
|
* @node: device node for this clock
|
|
*
|
|
* Sets up a basic divider clock.
|
|
*/
|
|
static void __init of_ti_divider_clk_setup(struct device_node *node)
|
|
{
|
|
struct clk *clk;
|
|
u32 flags = 0;
|
|
struct clk_omap_divider *div;
|
|
|
|
div = kzalloc(sizeof(*div), GFP_KERNEL);
|
|
if (!div)
|
|
return;
|
|
|
|
if (ti_clk_divider_populate(node, div, &flags))
|
|
goto cleanup;
|
|
|
|
clk = _register_divider(node, flags, div);
|
|
if (!IS_ERR(clk)) {
|
|
of_clk_add_provider(node, of_clk_src_simple_get, clk);
|
|
of_ti_clk_autoidle_setup(node);
|
|
return;
|
|
}
|
|
|
|
cleanup:
|
|
kfree(div->table);
|
|
kfree(div);
|
|
}
|
|
CLK_OF_DECLARE(divider_clk, "ti,divider-clock", of_ti_divider_clk_setup);
|
|
|
|
static void __init of_ti_composite_divider_clk_setup(struct device_node *node)
|
|
{
|
|
struct clk_omap_divider *div;
|
|
u32 tmp;
|
|
|
|
div = kzalloc(sizeof(*div), GFP_KERNEL);
|
|
if (!div)
|
|
return;
|
|
|
|
if (ti_clk_divider_populate(node, div, &tmp))
|
|
goto cleanup;
|
|
|
|
if (!ti_clk_add_component(node, &div->hw, CLK_COMPONENT_TYPE_DIVIDER))
|
|
return;
|
|
|
|
cleanup:
|
|
kfree(div->table);
|
|
kfree(div);
|
|
}
|
|
CLK_OF_DECLARE(ti_composite_divider_clk, "ti,composite-divider-clock",
|
|
of_ti_composite_divider_clk_setup);
|