linux/Documentation/devicetree/bindings/display/bridge/ptn3460.txt
Rob Herring efdbd7345f dt-bindings: consolidate display related bindings
This is a quite large renaming to consolidate display related bindings
into a single "display" directory from various scattered locations of
video, drm, gpu, fb, mipi, and panel. The prior location was somewhat
based on the Linux driver location, but bindings should be independent
of that.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
2015-10-22 09:21:21 -05:00

40 lines
1.2 KiB
Plaintext

ptn3460 bridge bindings
Required properties:
- compatible: "nxp,ptn3460"
- reg: i2c address of the bridge
- powerdown-gpio: OF device-tree gpio specification for PD_N pin.
- reset-gpio: OF device-tree gpio specification for RST_N pin.
- edid-emulation: The EDID emulation entry to use
+-------+------------+------------------+
| Value | Resolution | Description |
| 0 | 1024x768 | NXP Generic |
| 1 | 1920x1080 | NXP Generic |
| 2 | 1920x1080 | NXP Generic |
| 3 | 1600x900 | Samsung LTM200KT |
| 4 | 1920x1080 | Samsung LTM230HT |
| 5 | 1366x768 | NXP Generic |
| 6 | 1600x900 | ChiMei M215HGE |
+-------+------------+------------------+
- video interfaces: Device node can contain video interface port
nodes for panel according to [1].
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
lvds-bridge@20 {
compatible = "nxp,ptn3460";
reg = <0x20>;
powerdown-gpio = <&gpy2 5 1 0 0>;
reset-gpio = <&gpx1 5 1 0 0>;
edid-emulation = <5>;
ports {
port@0 {
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};