forked from Minki/linux
32f144f28e
All currently supported boards use hsotg/dwc2 controller in device
('peripheral') mode, so add property which sets correct operation mode.
This patch fixes support in recent changes in dwc2 driver, which added
support for dual-role devices.
Suggested-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
451 lines
9.3 KiB
Plaintext
451 lines
9.3 KiB
Plaintext
/*
|
|
* Samsung's S5PV210 SoC device tree source
|
|
*
|
|
* Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
|
|
*
|
|
* Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
|
|
* Tomasz Figa <t.figa@samsung.com>
|
|
*
|
|
* Board device tree source for Samsung Goni board.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include "s5pv210.dtsi"
|
|
|
|
/ {
|
|
model = "Samsung Goni based on S5PC110";
|
|
compatible = "samsung,goni", "samsung,s5pv210";
|
|
|
|
aliases {
|
|
i2c3 = &i2c_pmic;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x30000000 0x05000000
|
|
0x40000000 0x10000000
|
|
0x50000000 0x08000000>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
vtf_reg: fixed-regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "V_TF_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
reg = <0>;
|
|
gpios = <&mp05 4 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
pda_reg: fixed-regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCC_1.8V_PDA";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
reg = <1>;
|
|
};
|
|
|
|
bat_reg: fixed-regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "V_BAT";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
reg = <2>;
|
|
};
|
|
|
|
tsp_reg: fixed-regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "TSP_VDD";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
reg = <3>;
|
|
gpios = <&gpj1 3 0>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
i2c_pmic: i2c-pmic {
|
|
compatible = "i2c-gpio";
|
|
gpios = <&gpj4 0 0>, /* sda */
|
|
<&gpj4 3 0>; /* scl */
|
|
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmic@66 {
|
|
compatible = "national,lp3974";
|
|
reg = <0x66>;
|
|
|
|
max8998,pmic-buck1-default-dvs-idx = <0>;
|
|
max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
|
|
<&gph0 4 0>;
|
|
max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
|
|
<1200000>, <1200000>;
|
|
|
|
max8998,pmic-buck2-default-dvs-idx = <0>;
|
|
max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
|
|
max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
|
|
|
|
regulators {
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VALIVE_1.1V";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VUSB+MIPI_1.1V";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VADC_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "VTF_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VCC_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VLCD_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "VUSB+VDAC_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "VCC+VCAM_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "VPLL_1.1V";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "CAM_IO_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "CAM_ISP_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "CAM_A_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "CAM_CIF_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "CAM_AF_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "VMIPI_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "CAM_8M_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "VARM_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "VINT_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "VCC_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "CAM_CORE_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power-key {
|
|
gpios = <&gph2 6 1>;
|
|
linux,code = <KEY_POWER>;
|
|
label = "power";
|
|
debounce-interval = <1>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
};
|
|
|
|
&xusbxti {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
&keypad {
|
|
linux,input-no-autorepeat;
|
|
linux,input-wakeup;
|
|
samsung,keypad-num-rows = <3>;
|
|
samsung,keypad-num-columns = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
|
|
<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
|
|
status = "okay";
|
|
|
|
key_1 {
|
|
keypad,row = <0>;
|
|
keypad,column = <1>;
|
|
linux,code = <KEY_CONNECT>;
|
|
};
|
|
|
|
key_2 {
|
|
keypad,row = <0>;
|
|
keypad,column = <2>;
|
|
linux,code = <KEY_BACK>;
|
|
};
|
|
|
|
key_3 {
|
|
keypad,row = <1>;
|
|
keypad,column = <1>;
|
|
linux,code = <KEY_CAMERA_FOCUS>;
|
|
};
|
|
|
|
key_4 {
|
|
keypad,row = <1>;
|
|
keypad,column = <2>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
key_5 {
|
|
keypad,row = <2>;
|
|
keypad,column = <1>;
|
|
linux,code = <KEY_CAMERA>;
|
|
};
|
|
|
|
key_6 {
|
|
keypad,row = <2>;
|
|
keypad,column = <2>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci0 {
|
|
bus-width = <4>;
|
|
non-removable;
|
|
vmmc-supply = <&ldo5_reg>;
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci2 {
|
|
bus-width = <4>;
|
|
cd-gpios = <&gph3 4 1>;
|
|
vmmc-supply = <&vtf_reg>;
|
|
cd-inverted;
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&hsotg {
|
|
vusb_a-supply = <&ldo3_reg>;
|
|
vusb_d-supply = <&ldo8_reg>;
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <400000>;
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
status = "okay";
|
|
|
|
tsp@4a {
|
|
compatible = "atmel,maxtouch";
|
|
reg = <0x4a>;
|
|
interrupt-parent = <&gpj0>;
|
|
interrupts = <5 2>;
|
|
|
|
atmel,x-line = <17>;
|
|
atmel,y-line = <11>;
|
|
atmel,x-size = <800>;
|
|
atmel,y-size = <480>;
|
|
atmel,burst-length = <0x21>;
|
|
atmel,threshold = <0x28>;
|
|
atmel,orientation = <1>;
|
|
|
|
vdd-supply = <&tsp_reg>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <100000>;
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
status = "okay";
|
|
|
|
noon010pc30: sensor@30 {
|
|
compatible = "siliconfile,noon010pc30";
|
|
reg = <0x30>;
|
|
vddio-supply = <&ldo11_reg>;
|
|
vdda-supply = <&ldo13_reg>;
|
|
vdd_core-supply = <&ldo14_reg>;
|
|
|
|
clock-frequency = <16000000>;
|
|
clocks = <&clock_cam 0>;
|
|
clock-names = "mclk";
|
|
nreset-gpios = <&gpb 2 0>;
|
|
nstby-gpios = <&gpb 0 0>;
|
|
|
|
port {
|
|
noon010pc30_ep: endpoint {
|
|
remote-endpoint = <&fimc0_ep>;
|
|
bus-width = <8>;
|
|
hsync-active = <0>;
|
|
vsync-active = <1>;
|
|
pclk-sample = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&camera {
|
|
pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
|
|
pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
|
|
pinctrl-names = "default", "idle";
|
|
|
|
parallel-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* camera A input */
|
|
port@1 {
|
|
reg = <1>;
|
|
fimc0_ep: endpoint {
|
|
remote-endpoint = <&noon010pc30_ep>;
|
|
bus-width = <8>;
|
|
hsync-active = <1>;
|
|
vsync-active = <1>;
|
|
pclk-sample = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&fimd {
|
|
pinctrl-0 = <&lcd_clk &lcd_data24>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: timing {
|
|
/* 480x800@55Hz */
|
|
clock-frequency = <23439570>;
|
|
hactive = <480>;
|
|
hfront-porch = <16>;
|
|
hback-porch = <16>;
|
|
hsync-len = <2>;
|
|
vactive = <800>;
|
|
vback-porch = <2>;
|
|
vfront-porch = <28>;
|
|
vsync-len = <1>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <0>;
|
|
pixelclk-active = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&onenand {
|
|
status = "okay";
|
|
};
|