linux/Documentation/devicetree/bindings/mtd
Masahiro Yamada d91e8a3eec dt-binding: mtd: denali_dt: document clock property
Commit 30f9f2fb7b ("mtd: denali: add a DT driver") supported the
clock enablement, but did not document it in the DT binding.

In addition to the existing clock, this commit adds more clocks based
on the IP specification.

According to the Denali User's Guide, this IP needs three clocks:

 - clk: controller core clock

 - clk_x: bus interface clock

 - ecc_clk: clock at which ECC circuitry is run

The driver should accept the current single clock for the backward
compatibility, but the DT binding should represent the real hardware,
and future platforms must follow this.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-18 09:24:14 +02:00
..
partitions dt-bindings: mtd: document Broadcom's BCM47xx partitions 2018-05-23 10:08:44 +02:00
arm-versatile.txt mtd: augment the "arm,versatile-flash" bindings 2016-04-04 10:33:16 +02:00
aspeed-smc.txt mtd: spi-nor: bindings for the Aspeed memory controllers 2017-02-10 13:54:54 +01:00
atmel-dataflash.txt
atmel-nand.txt dt-bindings: mtd: atmel-nand: Document the nfc-io bindings 2017-05-31 11:55:33 +02:00
atmel-quadspi.txt dt-bindings: Remove "status" from examples 2017-09-05 10:03:06 -05:00
brcm,brcmnand.txt mtd: brcmnand: Add v7.2 controller support 2016-06-03 09:45:50 +02:00
cadence-quadspi.txt mtd: spi-nor: cadence-quadspi: Add new binding to enable loop-back circuit 2017-10-17 20:39:33 +02:00
common.txt dt-bindings: mtd: add a common label property to all mtd devices 2017-02-10 10:16:49 -08:00
cortina,gemini-flash.txt mtd: add DT bindings for the Cortina Systems Gemini Flash 2017-02-08 11:36:10 -08:00
davinci-nand.txt
denali-nand.txt dt-binding: mtd: denali_dt: document clock property 2018-07-18 09:24:14 +02:00
diskonchip.txt mtd: docg3: add device-tree documentation 2014-10-22 01:35:40 -07:00
elm.txt dt-bindings: mtd: elm: Correct compatible string requirement 2017-06-22 21:10:47 +02:00
flctl-nand.txt
fsl-quadspi.txt dt-bindings: fsl-quadspi: Add the example of two SPI NOR 2018-03-30 10:05:08 +02:00
fsl-upm-nand.txt
fsmc-nand.txt mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600 2015-10-26 13:19:40 -07:00
gpio-control-nand.txt mtd: nand: gpio: update binding 2017-05-10 18:18:55 -07:00
gpmc-nand.txt dt-bindings: gpmc: Correct location of generic gpmc binding 2017-06-22 21:12:15 +02:00
gpmc-nor.txt dt-bindings: Remove leading 0x from bindings notation 2017-12-06 14:56:33 -06:00
gpmc-onenand.txt dt-bindings: mtd: gpmc-onenand: Update properties description 2018-01-12 15:34:02 +01:00
gpmi-nand.txt dt-bindings: mtd: rawnand: gpmi: document specific ECC strength 2018-04-29 08:56:40 +02:00
hisi504-nand.txt mtd: hisilicon: add device tree binding documentation 2015-02-08 00:20:20 -08:00
hisilicon,fmc-spi-nor.txt mtd: spi-nor: add hisilicon spi-nor flash controller driver 2016-07-13 17:49:45 -07:00
ibm,ndfc.txt dt-bindings: powerpc/4xx: move 4xx NDFC and EMAC bindings to subsystem directories 2018-04-27 16:56:56 -05:00
ingenic,jz4780-nand.txt doc: dt: mtd: new binding for jz4780-{nand,bch} 2016-01-06 17:24:29 -08:00
jedec,spi-nor.txt Revert "dt-bindings: mtd: add sst25wf040b and en25s64 to sip-nor list" 2017-12-12 19:35:42 +01:00
lpc32xx-mlc.txt dt-bindings: Use lower case hex in unit-addresses 2017-12-26 10:37:05 -06:00
lpc32xx-slc.txt
marvell-nand.txt mtd: rawnand: marvell: Fix clock resource by adding a register clock 2018-03-29 09:38:10 +02:00
microchip,mchp23k256.txt mtd: mchp23k256: Add support for mchp23lcv1024 2017-06-08 16:32:11 -07:00
mtd-physmap.txt dt-bindings: mtd-physmap: Add endianness supports 2018-03-29 09:30:08 +02:00
mtk-nand.txt MTD changes: 2018-06-08 10:39:20 -07:00
mtk-quadspi.txt dt-bindings: mtd: add new compatible strings and improve description 2017-10-24 23:57:18 +02:00
mxc-nand.txt
nand.txt mtd: rawnand: add an option to specify NAND chip as a boot device 2018-07-02 09:01:52 +02:00
nvidia-tegra20-nand.txt dt-bindings: mtd: add tegra NAND controller binding 2018-07-02 09:01:56 +02:00
nxp-spifi.txt doc: dt: add documentation for nxp,lpc1773-spifi 2015-08-14 11:22:54 -07:00
orion-nand.txt
oxnas-nand.txt mtd: nand: Add OX820 NAND Support 2016-10-22 14:24:21 +02:00
partition.txt dt-bindings: mtd: document Broadcom's BCM47xx partitions 2018-05-23 10:08:44 +02:00
qcom_nandc.txt dt-bindings: qcom_nandc: update for ECC strength and step size 2018-07-18 09:24:05 +02:00
samsung-s3c2410.txt dt-bindings: mtd: add DT binding for s3c2410 flash controller 2016-11-07 14:48:36 +01:00
spear_smi.txt
spi-nand.txt dt-bindings: Add bindings for SPI NAND devices 2018-07-18 09:24:11 +02:00
st-fsm.txt dt-bindings: Remove "status" from examples 2017-09-05 10:03:06 -05:00
stm32-quadspi.txt dt-bindings: mtd: Document the STM32 QSPI bindings 2017-05-01 18:08:03 -07:00
sunxi-nand.txt mtd: rawnand: sunxi: Remove support for GPIO-based Ready/Busy polling 2018-04-29 08:56:41 +02:00
tango-nand.txt mtd: nand: tango: Update DT binding description 2017-01-03 09:51:13 +01:00
vf610-nfc.txt mtd: nand: vf610_nfc: add device tree bindings 2015-09-29 13:54:54 -07:00