linux/arch/x86/include/asm/processor.h
David Vrabel d8c98a1d14 x86/paravirt: Prevent rtc_cmos platform device init on PV guests
Adding the rtc platform device in non-privileged Xen PV guests causes
an IRQ conflict because these guests do not have legacy PIC and may
allocate irqs in the legacy range.

In a single VCPU Xen PV guest we should have:

/proc/interrupts:
           CPU0
  0:       4934  xen-percpu-virq      timer0
  1:          0  xen-percpu-ipi       spinlock0
  2:          0  xen-percpu-ipi       resched0
  3:          0  xen-percpu-ipi       callfunc0
  4:          0  xen-percpu-virq      debug0
  5:          0  xen-percpu-ipi       callfuncsingle0
  6:          0  xen-percpu-ipi       irqwork0
  7:        321   xen-dyn-event     xenbus
  8:         90   xen-dyn-event     hvc_console
  ...

But hvc_console cannot get its interrupt because it is already in use
by rtc0 and the console does not work.

  genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0)

We can avoid this problem by realizing that unprivileged PV guests (both
Xen and lguests) are not supposed to have rtc_cmos device and so
adding it is not necessary.

Privileged guests (i.e. Xen's dom0) do use it but they should not have
irq conflicts since they allocate irqs above legacy range (above
gsi_top, in fact).

Instead of explicitly testing whether the guest is privileged we can
extend pv_info structure to include information about guest's RTC
support.

Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: vkuznets@redhat.com
Cc: xen-devel@lists.xenproject.org
Cc: konrad.wilk@oracle.com
Cc: stable@vger.kernel.org # 4.2+
Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-19 21:35:13 +01:00

843 lines
21 KiB
C

#ifndef _ASM_X86_PROCESSOR_H
#define _ASM_X86_PROCESSOR_H
#include <asm/processor-flags.h>
/* Forward declaration, a strange C thing */
struct task_struct;
struct mm_struct;
struct vm86;
#include <asm/math_emu.h>
#include <asm/segment.h>
#include <asm/types.h>
#include <uapi/asm/sigcontext.h>
#include <asm/current.h>
#include <asm/cpufeature.h>
#include <asm/page.h>
#include <asm/pgtable_types.h>
#include <asm/percpu.h>
#include <asm/msr.h>
#include <asm/desc_defs.h>
#include <asm/nops.h>
#include <asm/special_insns.h>
#include <asm/fpu/types.h>
#include <linux/personality.h>
#include <linux/cpumask.h>
#include <linux/cache.h>
#include <linux/threads.h>
#include <linux/math64.h>
#include <linux/err.h>
#include <linux/irqflags.h>
/*
* We handle most unaligned accesses in hardware. On the other hand
* unaligned DMA can be quite expensive on some Nehalem processors.
*
* Based on this we disable the IP header alignment in network drivers.
*/
#define NET_IP_ALIGN 0
#define HBP_NUM 4
/*
* Default implementation of macro that returns current
* instruction pointer ("program counter").
*/
static inline void *current_text_addr(void)
{
void *pc;
asm volatile("mov $1f, %0; 1:":"=r" (pc));
return pc;
}
/*
* These alignment constraints are for performance in the vSMP case,
* but in the task_struct case we must also meet hardware imposed
* alignment requirements of the FPU state:
*/
#ifdef CONFIG_X86_VSMP
# define ARCH_MIN_TASKALIGN (1 << INTERNODE_CACHE_SHIFT)
# define ARCH_MIN_MMSTRUCT_ALIGN (1 << INTERNODE_CACHE_SHIFT)
#else
# define ARCH_MIN_TASKALIGN __alignof__(union fpregs_state)
# define ARCH_MIN_MMSTRUCT_ALIGN 0
#endif
enum tlb_infos {
ENTRIES,
NR_INFO
};
extern u16 __read_mostly tlb_lli_4k[NR_INFO];
extern u16 __read_mostly tlb_lli_2m[NR_INFO];
extern u16 __read_mostly tlb_lli_4m[NR_INFO];
extern u16 __read_mostly tlb_lld_4k[NR_INFO];
extern u16 __read_mostly tlb_lld_2m[NR_INFO];
extern u16 __read_mostly tlb_lld_4m[NR_INFO];
extern u16 __read_mostly tlb_lld_1g[NR_INFO];
/*
* CPU type and hardware bug flags. Kept separately for each CPU.
* Members of this structure are referenced in head.S, so think twice
* before touching them. [mj]
*/
struct cpuinfo_x86 {
__u8 x86; /* CPU family */
__u8 x86_vendor; /* CPU vendor */
__u8 x86_model;
__u8 x86_mask;
#ifdef CONFIG_X86_32
char wp_works_ok; /* It doesn't on 386's */
/* Problems on some 486Dx4's and old 386's: */
char rfu;
char pad0;
char pad1;
#else
/* Number of 4K pages in DTLB/ITLB combined(in pages): */
int x86_tlbsize;
#endif
__u8 x86_virt_bits;
__u8 x86_phys_bits;
/* CPUID returned core id bits: */
__u8 x86_coreid_bits;
/* Max extended CPUID function supported: */
__u32 extended_cpuid_level;
/* Maximum supported CPUID level, -1=no CPUID: */
int cpuid_level;
__u32 x86_capability[NCAPINTS + NBUGINTS];
char x86_vendor_id[16];
char x86_model_id[64];
/* in KB - valid for CPUS which support this call: */
int x86_cache_size;
int x86_cache_alignment; /* In bytes */
/* Cache QoS architectural values: */
int x86_cache_max_rmid; /* max index */
int x86_cache_occ_scale; /* scale to bytes */
int x86_power;
unsigned long loops_per_jiffy;
/* cpuid returned max cores value: */
u16 x86_max_cores;
u16 apicid;
u16 initial_apicid;
u16 x86_clflush_size;
/* number of cores as seen by the OS: */
u16 booted_cores;
/* Physical processor id: */
u16 phys_proc_id;
/* Core id: */
u16 cpu_core_id;
/* Compute unit id */
u8 compute_unit_id;
/* Index into per_cpu list: */
u16 cpu_index;
u32 microcode;
};
#define X86_VENDOR_INTEL 0
#define X86_VENDOR_CYRIX 1
#define X86_VENDOR_AMD 2
#define X86_VENDOR_UMC 3
#define X86_VENDOR_CENTAUR 5
#define X86_VENDOR_TRANSMETA 7
#define X86_VENDOR_NSC 8
#define X86_VENDOR_NUM 9
#define X86_VENDOR_UNKNOWN 0xff
/*
* capabilities of CPUs
*/
extern struct cpuinfo_x86 boot_cpu_data;
extern struct cpuinfo_x86 new_cpu_data;
extern struct tss_struct doublefault_tss;
extern __u32 cpu_caps_cleared[NCAPINTS];
extern __u32 cpu_caps_set[NCAPINTS];
#ifdef CONFIG_SMP
DECLARE_PER_CPU_READ_MOSTLY(struct cpuinfo_x86, cpu_info);
#define cpu_data(cpu) per_cpu(cpu_info, cpu)
#else
#define cpu_info boot_cpu_data
#define cpu_data(cpu) boot_cpu_data
#endif
extern const struct seq_operations cpuinfo_op;
#define cache_line_size() (boot_cpu_data.x86_cache_alignment)
extern void cpu_detect(struct cpuinfo_x86 *c);
extern void early_cpu_init(void);
extern void identify_boot_cpu(void);
extern void identify_secondary_cpu(struct cpuinfo_x86 *);
extern void print_cpu_info(struct cpuinfo_x86 *);
void print_cpu_msr(struct cpuinfo_x86 *);
extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
extern void init_amd_cacheinfo(struct cpuinfo_x86 *c);
extern void detect_extended_topology(struct cpuinfo_x86 *c);
extern void detect_ht(struct cpuinfo_x86 *c);
#ifdef CONFIG_X86_32
extern int have_cpuid_p(void);
#else
static inline int have_cpuid_p(void)
{
return 1;
}
#endif
static inline void native_cpuid(unsigned int *eax, unsigned int *ebx,
unsigned int *ecx, unsigned int *edx)
{
/* ecx is often an input as well as an output. */
asm volatile("cpuid"
: "=a" (*eax),
"=b" (*ebx),
"=c" (*ecx),
"=d" (*edx)
: "0" (*eax), "2" (*ecx)
: "memory");
}
static inline void load_cr3(pgd_t *pgdir)
{
write_cr3(__pa(pgdir));
}
#ifdef CONFIG_X86_32
/* This is the TSS defined by the hardware. */
struct x86_hw_tss {
unsigned short back_link, __blh;
unsigned long sp0;
unsigned short ss0, __ss0h;
unsigned long sp1;
/*
* We don't use ring 1, so ss1 is a convenient scratch space in
* the same cacheline as sp0. We use ss1 to cache the value in
* MSR_IA32_SYSENTER_CS. When we context switch
* MSR_IA32_SYSENTER_CS, we first check if the new value being
* written matches ss1, and, if it's not, then we wrmsr the new
* value and update ss1.
*
* The only reason we context switch MSR_IA32_SYSENTER_CS is
* that we set it to zero in vm86 tasks to avoid corrupting the
* stack if we were to go through the sysenter path from vm86
* mode.
*/
unsigned short ss1; /* MSR_IA32_SYSENTER_CS */
unsigned short __ss1h;
unsigned long sp2;
unsigned short ss2, __ss2h;
unsigned long __cr3;
unsigned long ip;
unsigned long flags;
unsigned long ax;
unsigned long cx;
unsigned long dx;
unsigned long bx;
unsigned long sp;
unsigned long bp;
unsigned long si;
unsigned long di;
unsigned short es, __esh;
unsigned short cs, __csh;
unsigned short ss, __ssh;
unsigned short ds, __dsh;
unsigned short fs, __fsh;
unsigned short gs, __gsh;
unsigned short ldt, __ldth;
unsigned short trace;
unsigned short io_bitmap_base;
} __attribute__((packed));
#else
struct x86_hw_tss {
u32 reserved1;
u64 sp0;
u64 sp1;
u64 sp2;
u64 reserved2;
u64 ist[7];
u32 reserved3;
u32 reserved4;
u16 reserved5;
u16 io_bitmap_base;
} __attribute__((packed)) ____cacheline_aligned;
#endif
/*
* IO-bitmap sizes:
*/
#define IO_BITMAP_BITS 65536
#define IO_BITMAP_BYTES (IO_BITMAP_BITS/8)
#define IO_BITMAP_LONGS (IO_BITMAP_BYTES/sizeof(long))
#define IO_BITMAP_OFFSET offsetof(struct tss_struct, io_bitmap)
#define INVALID_IO_BITMAP_OFFSET 0x8000
struct tss_struct {
/*
* The hardware state:
*/
struct x86_hw_tss x86_tss;
/*
* The extra 1 is there because the CPU will access an
* additional byte beyond the end of the IO permission
* bitmap. The extra byte must be all 1 bits, and must
* be within the limit.
*/
unsigned long io_bitmap[IO_BITMAP_LONGS + 1];
/*
* Space for the temporary SYSENTER stack:
*/
unsigned long SYSENTER_stack[64];
} ____cacheline_aligned;
DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss);
#ifdef CONFIG_X86_32
DECLARE_PER_CPU(unsigned long, cpu_current_top_of_stack);
#endif
/*
* Save the original ist values for checking stack pointers during debugging
*/
struct orig_ist {
unsigned long ist[7];
};
#ifdef CONFIG_X86_64
DECLARE_PER_CPU(struct orig_ist, orig_ist);
union irq_stack_union {
char irq_stack[IRQ_STACK_SIZE];
/*
* GCC hardcodes the stack canary as %gs:40. Since the
* irq_stack is the object at %gs:0, we reserve the bottom
* 48 bytes of the irq stack for the canary.
*/
struct {
char gs_base[40];
unsigned long stack_canary;
};
};
DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union) __visible;
DECLARE_INIT_PER_CPU(irq_stack_union);
DECLARE_PER_CPU(char *, irq_stack_ptr);
DECLARE_PER_CPU(unsigned int, irq_count);
extern asmlinkage void ignore_sysret(void);
#else /* X86_64 */
#ifdef CONFIG_CC_STACKPROTECTOR
/*
* Make sure stack canary segment base is cached-aligned:
* "For Intel Atom processors, avoid non zero segment base address
* that is not aligned to cache line boundary at all cost."
* (Optim Ref Manual Assembly/Compiler Coding Rule 15.)
*/
struct stack_canary {
char __pad[20]; /* canary at %gs:20 */
unsigned long canary;
};
DECLARE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
#endif
/*
* per-CPU IRQ handling stacks
*/
struct irq_stack {
u32 stack[THREAD_SIZE/sizeof(u32)];
} __aligned(THREAD_SIZE);
DECLARE_PER_CPU(struct irq_stack *, hardirq_stack);
DECLARE_PER_CPU(struct irq_stack *, softirq_stack);
#endif /* X86_64 */
extern unsigned int xstate_size;
struct perf_event;
struct thread_struct {
/* Cached TLS descriptors: */
struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
unsigned long sp0;
unsigned long sp;
#ifdef CONFIG_X86_32
unsigned long sysenter_cs;
#else
unsigned short es;
unsigned short ds;
unsigned short fsindex;
unsigned short gsindex;
#endif
#ifdef CONFIG_X86_32
unsigned long ip;
#endif
#ifdef CONFIG_X86_64
unsigned long fs;
#endif
unsigned long gs;
/* Save middle states of ptrace breakpoints */
struct perf_event *ptrace_bps[HBP_NUM];
/* Debug status used for traps, single steps, etc... */
unsigned long debugreg6;
/* Keep track of the exact dr7 value set by the user */
unsigned long ptrace_dr7;
/* Fault info: */
unsigned long cr2;
unsigned long trap_nr;
unsigned long error_code;
#ifdef CONFIG_VM86
/* Virtual 86 mode info */
struct vm86 *vm86;
#endif
/* IO permissions: */
unsigned long *io_bitmap_ptr;
unsigned long iopl;
/* Max allowed port in the bitmap, in bytes: */
unsigned io_bitmap_max;
/* Floating point and extended processor state */
struct fpu fpu;
/*
* WARNING: 'fpu' is dynamically-sized. It *MUST* be at
* the end.
*/
};
/*
* Set IOPL bits in EFLAGS from given mask
*/
static inline void native_set_iopl_mask(unsigned mask)
{
#ifdef CONFIG_X86_32
unsigned int reg;
asm volatile ("pushfl;"
"popl %0;"
"andl %1, %0;"
"orl %2, %0;"
"pushl %0;"
"popfl"
: "=&r" (reg)
: "i" (~X86_EFLAGS_IOPL), "r" (mask));
#endif
}
static inline void
native_load_sp0(struct tss_struct *tss, struct thread_struct *thread)
{
tss->x86_tss.sp0 = thread->sp0;
#ifdef CONFIG_X86_32
/* Only happens when SEP is enabled, no need to test "SEP"arately: */
if (unlikely(tss->x86_tss.ss1 != thread->sysenter_cs)) {
tss->x86_tss.ss1 = thread->sysenter_cs;
wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
}
#endif
}
static inline void native_swapgs(void)
{
#ifdef CONFIG_X86_64
asm volatile("swapgs" ::: "memory");
#endif
}
static inline unsigned long current_top_of_stack(void)
{
#ifdef CONFIG_X86_64
return this_cpu_read_stable(cpu_tss.x86_tss.sp0);
#else
/* sp0 on x86_32 is special in and around vm86 mode. */
return this_cpu_read_stable(cpu_current_top_of_stack);
#endif
}
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define __cpuid native_cpuid
#define paravirt_enabled() 0
#define paravirt_has(x) 0
static inline void load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
{
native_load_sp0(tss, thread);
}
#define set_iopl_mask native_set_iopl_mask
#endif /* CONFIG_PARAVIRT */
typedef struct {
unsigned long seg;
} mm_segment_t;
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
unsigned long get_wchan(struct task_struct *p);
/*
* Generic CPUID function
* clear %ecx since some cpus (Cyrix MII) do not set or clear %ecx
* resulting in stale register contents being returned.
*/
static inline void cpuid(unsigned int op,
unsigned int *eax, unsigned int *ebx,
unsigned int *ecx, unsigned int *edx)
{
*eax = op;
*ecx = 0;
__cpuid(eax, ebx, ecx, edx);
}
/* Some CPUID calls want 'count' to be placed in ecx */
static inline void cpuid_count(unsigned int op, int count,
unsigned int *eax, unsigned int *ebx,
unsigned int *ecx, unsigned int *edx)
{
*eax = op;
*ecx = count;
__cpuid(eax, ebx, ecx, edx);
}
/*
* CPUID functions returning a single datum
*/
static inline unsigned int cpuid_eax(unsigned int op)
{
unsigned int eax, ebx, ecx, edx;
cpuid(op, &eax, &ebx, &ecx, &edx);
return eax;
}
static inline unsigned int cpuid_ebx(unsigned int op)
{
unsigned int eax, ebx, ecx, edx;
cpuid(op, &eax, &ebx, &ecx, &edx);
return ebx;
}
static inline unsigned int cpuid_ecx(unsigned int op)
{
unsigned int eax, ebx, ecx, edx;
cpuid(op, &eax, &ebx, &ecx, &edx);
return ecx;
}
static inline unsigned int cpuid_edx(unsigned int op)
{
unsigned int eax, ebx, ecx, edx;
cpuid(op, &eax, &ebx, &ecx, &edx);
return edx;
}
/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
static __always_inline void rep_nop(void)
{
asm volatile("rep; nop" ::: "memory");
}
static __always_inline void cpu_relax(void)
{
rep_nop();
}
#define cpu_relax_lowlatency() cpu_relax()
/* Stop speculative execution and prefetching of modified code. */
static inline void sync_core(void)
{
int tmp;
#ifdef CONFIG_M486
/*
* Do a CPUID if available, otherwise do a jump. The jump
* can conveniently enough be the jump around CPUID.
*/
asm volatile("cmpl %2,%1\n\t"
"jl 1f\n\t"
"cpuid\n"
"1:"
: "=a" (tmp)
: "rm" (boot_cpu_data.cpuid_level), "ri" (0), "0" (1)
: "ebx", "ecx", "edx", "memory");
#else
/*
* CPUID is a barrier to speculative execution.
* Prefetched instructions are automatically
* invalidated when modified.
*/
asm volatile("cpuid"
: "=a" (tmp)
: "0" (1)
: "ebx", "ecx", "edx", "memory");
#endif
}
extern void select_idle_routine(const struct cpuinfo_x86 *c);
extern void init_amd_e400_c1e_mask(void);
extern unsigned long boot_option_idle_override;
extern bool amd_e400_c1e_detected;
enum idle_boot_override {IDLE_NO_OVERRIDE=0, IDLE_HALT, IDLE_NOMWAIT,
IDLE_POLL};
extern void enable_sep_cpu(void);
extern int sysenter_setup(void);
extern void early_trap_init(void);
void early_trap_pf_init(void);
/* Defined in head.S */
extern struct desc_ptr early_gdt_descr;
extern void cpu_set_gdt(int);
extern void switch_to_new_gdt(int);
extern void load_percpu_segment(int);
extern void cpu_init(void);
static inline unsigned long get_debugctlmsr(void)
{
unsigned long debugctlmsr = 0;
#ifndef CONFIG_X86_DEBUGCTLMSR
if (boot_cpu_data.x86 < 6)
return 0;
#endif
rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
return debugctlmsr;
}
static inline void update_debugctlmsr(unsigned long debugctlmsr)
{
#ifndef CONFIG_X86_DEBUGCTLMSR
if (boot_cpu_data.x86 < 6)
return;
#endif
wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
}
extern void set_task_blockstep(struct task_struct *task, bool on);
/* Boot loader type from the setup header: */
extern int bootloader_type;
extern int bootloader_version;
extern char ignore_fpu_irq;
#define HAVE_ARCH_PICK_MMAP_LAYOUT 1
#define ARCH_HAS_PREFETCHW
#define ARCH_HAS_SPINLOCK_PREFETCH
#ifdef CONFIG_X86_32
# define BASE_PREFETCH ""
# define ARCH_HAS_PREFETCH
#else
# define BASE_PREFETCH "prefetcht0 %P1"
#endif
/*
* Prefetch instructions for Pentium III (+) and AMD Athlon (+)
*
* It's not worth to care about 3dnow prefetches for the K6
* because they are microcoded there and very slow.
*/
static inline void prefetch(const void *x)
{
alternative_input(BASE_PREFETCH, "prefetchnta %P1",
X86_FEATURE_XMM,
"m" (*(const char *)x));
}
/*
* 3dnow prefetch to get an exclusive cache line.
* Useful for spinlocks to avoid one state transition in the
* cache coherency protocol:
*/
static inline void prefetchw(const void *x)
{
alternative_input(BASE_PREFETCH, "prefetchw %P1",
X86_FEATURE_3DNOWPREFETCH,
"m" (*(const char *)x));
}
static inline void spin_lock_prefetch(const void *x)
{
prefetchw(x);
}
#define TOP_OF_INIT_STACK ((unsigned long)&init_stack + sizeof(init_stack) - \
TOP_OF_KERNEL_STACK_PADDING)
#ifdef CONFIG_X86_32
/*
* User space process size: 3GB (default).
*/
#define TASK_SIZE PAGE_OFFSET
#define TASK_SIZE_MAX TASK_SIZE
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX STACK_TOP
#define INIT_THREAD { \
.sp0 = TOP_OF_INIT_STACK, \
.sysenter_cs = __KERNEL_CS, \
.io_bitmap_ptr = NULL, \
}
extern unsigned long thread_saved_pc(struct task_struct *tsk);
/*
* TOP_OF_KERNEL_STACK_PADDING reserves 8 bytes on top of the ring0 stack.
* This is necessary to guarantee that the entire "struct pt_regs"
* is accessible even if the CPU haven't stored the SS/ESP registers
* on the stack (interrupt gate does not save these registers
* when switching to the same priv ring).
* Therefore beware: accessing the ss/esp fields of the
* "struct pt_regs" is possible, but they may contain the
* completely wrong values.
*/
#define task_pt_regs(task) \
({ \
unsigned long __ptr = (unsigned long)task_stack_page(task); \
__ptr += THREAD_SIZE - TOP_OF_KERNEL_STACK_PADDING; \
((struct pt_regs *)__ptr) - 1; \
})
#define KSTK_ESP(task) (task_pt_regs(task)->sp)
#else
/*
* User space process size. 47bits minus one guard page. The guard
* page is necessary on Intel CPUs: if a SYSCALL instruction is at
* the highest possible canonical userspace address, then that
* syscall will enter the kernel with a non-canonical return
* address, and SYSRET will explode dangerously. We avoid this
* particular problem by preventing anything from being mapped
* at the maximum canonical address.
*/
#define TASK_SIZE_MAX ((1UL << 47) - PAGE_SIZE)
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#define IA32_PAGE_OFFSET ((current->personality & ADDR_LIMIT_3GB) ? \
0xc0000000 : 0xFFFFe000)
#define TASK_SIZE (test_thread_flag(TIF_ADDR32) ? \
IA32_PAGE_OFFSET : TASK_SIZE_MAX)
#define TASK_SIZE_OF(child) ((test_tsk_thread_flag(child, TIF_ADDR32)) ? \
IA32_PAGE_OFFSET : TASK_SIZE_MAX)
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX TASK_SIZE_MAX
#define INIT_THREAD { \
.sp0 = TOP_OF_INIT_STACK \
}
/*
* Return saved PC of a blocked thread.
* What is this good for? it will be always the scheduler or ret_from_fork.
*/
#define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8))
#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1)
extern unsigned long KSTK_ESP(struct task_struct *task);
#endif /* CONFIG_X86_64 */
extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
unsigned long new_sp);
/*
* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3))
#define KSTK_EIP(task) (task_pt_regs(task)->ip)
/* Get/set a process' ability to use the timestamp counter instruction */
#define GET_TSC_CTL(adr) get_tsc_mode((adr))
#define SET_TSC_CTL(val) set_tsc_mode((val))
extern int get_tsc_mode(unsigned long adr);
extern int set_tsc_mode(unsigned int val);
/* Register/unregister a process' MPX related resource */
#define MPX_ENABLE_MANAGEMENT() mpx_enable_management()
#define MPX_DISABLE_MANAGEMENT() mpx_disable_management()
#ifdef CONFIG_X86_INTEL_MPX
extern int mpx_enable_management(void);
extern int mpx_disable_management(void);
#else
static inline int mpx_enable_management(void)
{
return -EINVAL;
}
static inline int mpx_disable_management(void)
{
return -EINVAL;
}
#endif /* CONFIG_X86_INTEL_MPX */
extern u16 amd_get_nb_id(int cpu);
extern u32 amd_get_nodes_per_socket(void);
static inline uint32_t hypervisor_cpuid_base(const char *sig, uint32_t leaves)
{
uint32_t base, eax, signature[3];
for (base = 0x40000000; base < 0x40010000; base += 0x100) {
cpuid(base, &eax, &signature[0], &signature[1], &signature[2]);
if (!memcmp(sig, signature, 12) &&
(leaves == 0 || ((eax - base) >= leaves)))
return base;
}
return 0;
}
extern unsigned long arch_align_stack(unsigned long sp);
extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
void default_idle(void);
#ifdef CONFIG_XEN
bool xen_set_default_idle(void);
#else
#define xen_set_default_idle 0
#endif
void stop_this_cpu(void *dummy);
void df_debug(struct pt_regs *regs, long error_code);
#endif /* _ASM_X86_PROCESSOR_H */