forked from Minki/linux
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
725 lines
18 KiB
C
725 lines
18 KiB
C
/* isa-skeleton.c: A network driver outline for linux.
|
|
*
|
|
* Written 1993-94 by Donald Becker.
|
|
*
|
|
* Copyright 1993 United States Government as represented by the
|
|
* Director, National Security Agency.
|
|
*
|
|
* This software may be used and distributed according to the terms
|
|
* of the GNU General Public License, incorporated herein by reference.
|
|
*
|
|
* The author may be reached as becker@scyld.com, or C/O
|
|
* Scyld Computing Corporation
|
|
* 410 Severn Ave., Suite 210
|
|
* Annapolis MD 21403
|
|
*
|
|
* This file is an outline for writing a network device driver for the
|
|
* the Linux operating system.
|
|
*
|
|
* To write (or understand) a driver, have a look at the "loopback.c" file to
|
|
* get a feel of what is going on, and then use the code below as a skeleton
|
|
* for the new driver.
|
|
*
|
|
*/
|
|
|
|
static const char *version =
|
|
"isa-skeleton.c:v1.51 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
|
|
|
|
/*
|
|
* Sources:
|
|
* List your sources of programming information to document that
|
|
* the driver is your own creation, and give due credit to others
|
|
* that contributed to the work. Remember that GNU project code
|
|
* cannot use proprietary or trade secret information. Interface
|
|
* definitions are generally considered non-copyrightable to the
|
|
* extent that the same names and structures must be used to be
|
|
* compatible.
|
|
*
|
|
* Finally, keep in mind that the Linux kernel is has an API, not
|
|
* ABI. Proprietary object-code-only distributions are not permitted
|
|
* under the GPL.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
|
|
/*
|
|
* The name of the card. Is used for messages and in the requests for
|
|
* io regions, irqs and dma channels
|
|
*/
|
|
static const char* cardname = "netcard";
|
|
|
|
/* First, a few definitions that the brave might change. */
|
|
|
|
/* A zero-terminated list of I/O addresses to be probed. */
|
|
static unsigned int netcard_portlist[] __initdata =
|
|
{ 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
|
|
|
|
/* use 0 for production, 1 for verification, >2 for debug */
|
|
#ifndef NET_DEBUG
|
|
#define NET_DEBUG 2
|
|
#endif
|
|
static unsigned int net_debug = NET_DEBUG;
|
|
|
|
/* The number of low I/O ports used by the ethercard. */
|
|
#define NETCARD_IO_EXTENT 32
|
|
|
|
#define MY_TX_TIMEOUT ((400*HZ)/1000)
|
|
|
|
/* Information that need to be kept for each board. */
|
|
struct net_local {
|
|
struct net_device_stats stats;
|
|
long open_time; /* Useless example local info. */
|
|
|
|
/* Tx control lock. This protects the transmit buffer ring
|
|
* state along with the "tx full" state of the driver. This
|
|
* means all netif_queue flow control actions are protected
|
|
* by this lock as well.
|
|
*/
|
|
spinlock_t lock;
|
|
};
|
|
|
|
/* The station (ethernet) address prefix, used for IDing the board. */
|
|
#define SA_ADDR0 0x00
|
|
#define SA_ADDR1 0x42
|
|
#define SA_ADDR2 0x65
|
|
|
|
/* Index to functions, as function prototypes. */
|
|
|
|
static int netcard_probe1(struct net_device *dev, int ioaddr);
|
|
static int net_open(struct net_device *dev);
|
|
static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
|
|
static void net_rx(struct net_device *dev);
|
|
static int net_close(struct net_device *dev);
|
|
static struct net_device_stats *net_get_stats(struct net_device *dev);
|
|
static void set_multicast_list(struct net_device *dev);
|
|
static void net_tx_timeout(struct net_device *dev);
|
|
|
|
|
|
/* Example routines you must write ;->. */
|
|
#define tx_done(dev) 1
|
|
static void hardware_send_packet(short ioaddr, char *buf, int length);
|
|
static void chipset_init(struct net_device *dev, int startp);
|
|
|
|
/*
|
|
* Check for a network adaptor of this type, and return '0' iff one exists.
|
|
* If dev->base_addr == 0, probe all likely locations.
|
|
* If dev->base_addr == 1, always return failure.
|
|
* If dev->base_addr == 2, allocate space for the device and return success
|
|
* (detachable devices only).
|
|
*/
|
|
static int __init do_netcard_probe(struct net_device *dev)
|
|
{
|
|
int i;
|
|
int base_addr = dev->base_addr;
|
|
int irq = dev->irq;
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
if (base_addr > 0x1ff) /* Check a single specified location. */
|
|
return netcard_probe1(dev, base_addr);
|
|
else if (base_addr != 0) /* Don't probe at all. */
|
|
return -ENXIO;
|
|
|
|
for (i = 0; netcard_portlist[i]; i++) {
|
|
int ioaddr = netcard_portlist[i];
|
|
if (netcard_probe1(dev, ioaddr) == 0)
|
|
return 0;
|
|
dev->irq = irq;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void cleanup_card(struct net_device *dev)
|
|
{
|
|
#ifdef jumpered_dma
|
|
free_dma(dev->dma);
|
|
#endif
|
|
#ifdef jumpered_interrupts
|
|
free_irq(dev->irq, dev);
|
|
#endif
|
|
release_region(dev->base_addr, NETCARD_IO_EXTENT);
|
|
}
|
|
|
|
#ifndef MODULE
|
|
struct net_device * __init netcard_probe(int unit)
|
|
{
|
|
struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
|
|
int err;
|
|
|
|
if (!dev)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
sprintf(dev->name, "eth%d", unit);
|
|
netdev_boot_setup_check(dev);
|
|
|
|
err = do_netcard_probe(dev);
|
|
if (err)
|
|
goto out;
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto out1;
|
|
return dev;
|
|
out1:
|
|
cleanup_card(dev);
|
|
out:
|
|
free_netdev(dev);
|
|
return ERR_PTR(err);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* This is the real probe routine. Linux has a history of friendly device
|
|
* probes on the ISA bus. A good device probes avoids doing writes, and
|
|
* verifies that the correct device exists and functions.
|
|
*/
|
|
static int __init netcard_probe1(struct net_device *dev, int ioaddr)
|
|
{
|
|
struct net_local *np;
|
|
static unsigned version_printed;
|
|
int i;
|
|
int err = -ENODEV;
|
|
|
|
/* Grab the region so that no one else tries to probe our ioports. */
|
|
if (!request_region(ioaddr, NETCARD_IO_EXTENT, cardname))
|
|
return -EBUSY;
|
|
|
|
/*
|
|
* For ethernet adaptors the first three octets of the station address
|
|
* contains the manufacturer's unique code. That might be a good probe
|
|
* method. Ideally you would add additional checks.
|
|
*/
|
|
if (inb(ioaddr + 0) != SA_ADDR0
|
|
|| inb(ioaddr + 1) != SA_ADDR1
|
|
|| inb(ioaddr + 2) != SA_ADDR2)
|
|
goto out;
|
|
|
|
if (net_debug && version_printed++ == 0)
|
|
printk(KERN_DEBUG "%s", version);
|
|
|
|
printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cardname, ioaddr);
|
|
|
|
/* Fill in the 'dev' fields. */
|
|
dev->base_addr = ioaddr;
|
|
|
|
/* Retrieve and print the ethernet address. */
|
|
for (i = 0; i < 6; i++)
|
|
printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
|
|
|
|
err = -EAGAIN;
|
|
#ifdef jumpered_interrupts
|
|
/*
|
|
* If this board has jumpered interrupts, allocate the interrupt
|
|
* vector now. There is no point in waiting since no other device
|
|
* can use the interrupt, and this marks the irq as busy. Jumpered
|
|
* interrupts are typically not reported by the boards, and we must
|
|
* used autoIRQ to find them.
|
|
*/
|
|
|
|
if (dev->irq == -1)
|
|
; /* Do nothing: a user-level program will set it. */
|
|
else if (dev->irq < 2) { /* "Auto-IRQ" */
|
|
unsigned long irq_mask = probe_irq_on();
|
|
/* Trigger an interrupt here. */
|
|
|
|
dev->irq = probe_irq_off(irq_mask);
|
|
if (net_debug >= 2)
|
|
printk(" autoirq is %d", dev->irq);
|
|
} else if (dev->irq == 2)
|
|
/*
|
|
* Fixup for users that don't know that IRQ 2 is really
|
|
* IRQ9, or don't know which one to set.
|
|
*/
|
|
dev->irq = 9;
|
|
|
|
{
|
|
int irqval = request_irq(dev->irq, &net_interrupt, 0, cardname, dev);
|
|
if (irqval) {
|
|
printk("%s: unable to get IRQ %d (irqval=%d).\n",
|
|
dev->name, dev->irq, irqval);
|
|
goto out;
|
|
}
|
|
}
|
|
#endif /* jumpered interrupt */
|
|
#ifdef jumpered_dma
|
|
/*
|
|
* If we use a jumpered DMA channel, that should be probed for and
|
|
* allocated here as well. See lance.c for an example.
|
|
*/
|
|
if (dev->dma == 0) {
|
|
if (request_dma(dev->dma, cardname)) {
|
|
printk("DMA %d allocation failed.\n", dev->dma);
|
|
goto out1;
|
|
} else
|
|
printk(", assigned DMA %d.\n", dev->dma);
|
|
} else {
|
|
short dma_status, new_dma_status;
|
|
|
|
/* Read the DMA channel status registers. */
|
|
dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
|
|
(inb(DMA2_STAT_REG) & 0xf0);
|
|
/* Trigger a DMA request, perhaps pause a bit. */
|
|
outw(0x1234, ioaddr + 8);
|
|
/* Re-read the DMA status registers. */
|
|
new_dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
|
|
(inb(DMA2_STAT_REG) & 0xf0);
|
|
/*
|
|
* Eliminate the old and floating requests,
|
|
* and DMA4 the cascade.
|
|
*/
|
|
new_dma_status ^= dma_status;
|
|
new_dma_status &= ~0x10;
|
|
for (i = 7; i > 0; i--)
|
|
if (test_bit(i, &new_dma_status)) {
|
|
dev->dma = i;
|
|
break;
|
|
}
|
|
if (i <= 0) {
|
|
printk("DMA probe failed.\n");
|
|
goto out1;
|
|
}
|
|
if (request_dma(dev->dma, cardname)) {
|
|
printk("probed DMA %d allocation failed.\n", dev->dma);
|
|
goto out1;
|
|
}
|
|
}
|
|
#endif /* jumpered DMA */
|
|
|
|
np = netdev_priv(dev);
|
|
spin_lock_init(&np->lock);
|
|
|
|
dev->open = net_open;
|
|
dev->stop = net_close;
|
|
dev->hard_start_xmit = net_send_packet;
|
|
dev->get_stats = net_get_stats;
|
|
dev->set_multicast_list = &set_multicast_list;
|
|
|
|
dev->tx_timeout = &net_tx_timeout;
|
|
dev->watchdog_timeo = MY_TX_TIMEOUT;
|
|
return 0;
|
|
out1:
|
|
#ifdef jumpered_interrupts
|
|
free_irq(dev->irq, dev);
|
|
#endif
|
|
out:
|
|
release_region(base_addr, NETCARD_IO_EXTENT);
|
|
return err;
|
|
}
|
|
|
|
static void net_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct net_local *np = netdev_priv(dev);
|
|
|
|
printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
|
|
tx_done(dev) ? "IRQ conflict" : "network cable problem");
|
|
|
|
/* Try to restart the adaptor. */
|
|
chipset_init(dev, 1);
|
|
|
|
np->stats.tx_errors++;
|
|
|
|
/* If we have space available to accept new transmit
|
|
* requests, wake up the queueing layer. This would
|
|
* be the case if the chipset_init() call above just
|
|
* flushes out the tx queue and empties it.
|
|
*
|
|
* If instead, the tx queue is retained then the
|
|
* netif_wake_queue() call should be placed in the
|
|
* TX completion interrupt handler of the driver instead
|
|
* of here.
|
|
*/
|
|
if (!tx_full(dev))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/*
|
|
* Open/initialize the board. This is called (in the current kernel)
|
|
* sometime after booting when the 'ifconfig' program is run.
|
|
*
|
|
* This routine should set everything up anew at each open, even
|
|
* registers that "should" only need to be set once at boot, so that
|
|
* there is non-reboot way to recover if something goes wrong.
|
|
*/
|
|
static int
|
|
net_open(struct net_device *dev)
|
|
{
|
|
struct net_local *np = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
/*
|
|
* This is used if the interrupt line can turned off (shared).
|
|
* See 3c503.c for an example of selecting the IRQ at config-time.
|
|
*/
|
|
if (request_irq(dev->irq, &net_interrupt, 0, cardname, dev)) {
|
|
return -EAGAIN;
|
|
}
|
|
/*
|
|
* Always allocate the DMA channel after the IRQ,
|
|
* and clean up on failure.
|
|
*/
|
|
if (request_dma(dev->dma, cardname)) {
|
|
free_irq(dev->irq, dev);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* Reset the hardware here. Don't forget to set the station address. */
|
|
chipset_init(dev, 1);
|
|
outb(0x00, ioaddr);
|
|
np->open_time = jiffies;
|
|
|
|
/* We are now ready to accept transmit requeusts from
|
|
* the queueing layer of the networking.
|
|
*/
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This will only be invoked if your driver is _not_ in XOFF state.
|
|
* What this means is that you need not check it, and that this
|
|
* invariant will hold if you make sure that the netif_*_queue()
|
|
* calls are done at the proper times.
|
|
*/
|
|
static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct net_local *np = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
|
|
unsigned char *buf = skb->data;
|
|
|
|
/* If some error occurs while trying to transmit this
|
|
* packet, you should return '1' from this function.
|
|
* In such a case you _may not_ do anything to the
|
|
* SKB, it is still owned by the network queueing
|
|
* layer when an error is returned. This means you
|
|
* may not modify any SKB fields, you may not free
|
|
* the SKB, etc.
|
|
*/
|
|
|
|
#if TX_RING
|
|
/* This is the most common case for modern hardware.
|
|
* The spinlock protects this code from the TX complete
|
|
* hardware interrupt handler. Queue flow control is
|
|
* thus managed under this lock as well.
|
|
*/
|
|
spin_lock_irq(&np->lock);
|
|
|
|
add_to_tx_ring(np, skb, length);
|
|
dev->trans_start = jiffies;
|
|
|
|
/* If we just used up the very last entry in the
|
|
* TX ring on this device, tell the queueing
|
|
* layer to send no more.
|
|
*/
|
|
if (tx_full(dev))
|
|
netif_stop_queue(dev);
|
|
|
|
/* When the TX completion hw interrupt arrives, this
|
|
* is when the transmit statistics are updated.
|
|
*/
|
|
|
|
spin_unlock_irq(&np->lock);
|
|
#else
|
|
/* This is the case for older hardware which takes
|
|
* a single transmit buffer at a time, and it is
|
|
* just written to the device via PIO.
|
|
*
|
|
* No spin locking is needed since there is no TX complete
|
|
* event. If by chance your card does have a TX complete
|
|
* hardware IRQ then you may need to utilize np->lock here.
|
|
*/
|
|
hardware_send_packet(ioaddr, buf, length);
|
|
np->stats.tx_bytes += skb->len;
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
/* You might need to clean up and record Tx statistics here. */
|
|
if (inw(ioaddr) == /*RU*/81)
|
|
np->stats.tx_aborted_errors++;
|
|
dev_kfree_skb (skb);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if TX_RING
|
|
/* This handles TX complete events posted by the device
|
|
* via interrupts.
|
|
*/
|
|
void net_tx(struct net_device *dev)
|
|
{
|
|
struct net_local *np = netdev_priv(dev);
|
|
int entry;
|
|
|
|
/* This protects us from concurrent execution of
|
|
* our dev->hard_start_xmit function above.
|
|
*/
|
|
spin_lock(&np->lock);
|
|
|
|
entry = np->tx_old;
|
|
while (tx_entry_is_sent(np, entry)) {
|
|
struct sk_buff *skb = np->skbs[entry];
|
|
|
|
np->stats.tx_bytes += skb->len;
|
|
dev_kfree_skb_irq (skb);
|
|
|
|
entry = next_tx_entry(np, entry);
|
|
}
|
|
np->tx_old = entry;
|
|
|
|
/* If we had stopped the queue due to a "tx full"
|
|
* condition, and space has now been made available,
|
|
* wake up the queue.
|
|
*/
|
|
if (netif_queue_stopped(dev) && ! tx_full(dev))
|
|
netif_wake_queue(dev);
|
|
|
|
spin_unlock(&np->lock);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* The typical workload of the driver:
|
|
* Handle the network interface interrupts.
|
|
*/
|
|
static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs * regs)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct net_local *np;
|
|
int ioaddr, status;
|
|
int handled = 0;
|
|
|
|
ioaddr = dev->base_addr;
|
|
|
|
np = netdev_priv(dev);
|
|
status = inw(ioaddr + 0);
|
|
|
|
if (status == 0)
|
|
goto out;
|
|
handled = 1;
|
|
|
|
if (status & RX_INTR) {
|
|
/* Got a packet(s). */
|
|
net_rx(dev);
|
|
}
|
|
#if TX_RING
|
|
if (status & TX_INTR) {
|
|
/* Transmit complete. */
|
|
net_tx(dev);
|
|
np->stats.tx_packets++;
|
|
netif_wake_queue(dev);
|
|
}
|
|
#endif
|
|
if (status & COUNTERS_INTR) {
|
|
/* Increment the appropriate 'localstats' field. */
|
|
np->stats.tx_window_errors++;
|
|
}
|
|
out:
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/* We have a good packet(s), get it/them out of the buffers. */
|
|
static void
|
|
net_rx(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
int boguscount = 10;
|
|
|
|
do {
|
|
int status = inw(ioaddr);
|
|
int pkt_len = inw(ioaddr);
|
|
|
|
if (pkt_len == 0) /* Read all the frames? */
|
|
break; /* Done for now */
|
|
|
|
if (status & 0x40) { /* There was an error. */
|
|
lp->stats.rx_errors++;
|
|
if (status & 0x20) lp->stats.rx_frame_errors++;
|
|
if (status & 0x10) lp->stats.rx_over_errors++;
|
|
if (status & 0x08) lp->stats.rx_crc_errors++;
|
|
if (status & 0x04) lp->stats.rx_fifo_errors++;
|
|
} else {
|
|
/* Malloc up new buffer. */
|
|
struct sk_buff *skb;
|
|
|
|
lp->stats.rx_bytes+=pkt_len;
|
|
|
|
skb = dev_alloc_skb(pkt_len);
|
|
if (skb == NULL) {
|
|
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
|
|
dev->name);
|
|
lp->stats.rx_dropped++;
|
|
break;
|
|
}
|
|
skb->dev = dev;
|
|
|
|
/* 'skb->data' points to the start of sk_buff data area. */
|
|
memcpy(skb_put(skb,pkt_len), (void*)dev->rmem_start,
|
|
pkt_len);
|
|
/* or */
|
|
insw(ioaddr, skb->data, (pkt_len + 1) >> 1);
|
|
|
|
netif_rx(skb);
|
|
dev->last_rx = jiffies;
|
|
lp->stats.rx_packets++;
|
|
lp->stats.rx_bytes += pkt_len;
|
|
}
|
|
} while (--boguscount);
|
|
|
|
return;
|
|
}
|
|
|
|
/* The inverse routine to net_open(). */
|
|
static int
|
|
net_close(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
|
|
lp->open_time = 0;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* Flush the Tx and disable Rx here. */
|
|
|
|
disable_dma(dev->dma);
|
|
|
|
/* If not IRQ or DMA jumpered, free up the line. */
|
|
outw(0x00, ioaddr+0); /* Release the physical interrupt line. */
|
|
|
|
free_irq(dev->irq, dev);
|
|
free_dma(dev->dma);
|
|
|
|
/* Update the statistics here. */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
* Get the current statistics.
|
|
* This may be called with the card open or closed.
|
|
*/
|
|
static struct net_device_stats *net_get_stats(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
short ioaddr = dev->base_addr;
|
|
|
|
/* Update the statistics from the device registers. */
|
|
lp->stats.rx_missed_errors = inw(ioaddr+1);
|
|
return &lp->stats;
|
|
}
|
|
|
|
/*
|
|
* Set or clear the multicast filter for this adaptor.
|
|
* num_addrs == -1 Promiscuous mode, receive all packets
|
|
* num_addrs == 0 Normal mode, clear multicast list
|
|
* num_addrs > 0 Multicast mode, receive normal and MC packets,
|
|
* and do best-effort filtering.
|
|
*/
|
|
static void
|
|
set_multicast_list(struct net_device *dev)
|
|
{
|
|
short ioaddr = dev->base_addr;
|
|
if (dev->flags&IFF_PROMISC)
|
|
{
|
|
/* Enable promiscuous mode */
|
|
outw(MULTICAST|PROMISC, ioaddr);
|
|
}
|
|
else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS)
|
|
{
|
|
/* Disable promiscuous mode, use normal mode. */
|
|
hardware_set_filter(NULL);
|
|
|
|
outw(MULTICAST, ioaddr);
|
|
}
|
|
else if(dev->mc_count)
|
|
{
|
|
/* Walk the address list, and load the filter */
|
|
hardware_set_filter(dev->mc_list);
|
|
|
|
outw(MULTICAST, ioaddr);
|
|
}
|
|
else
|
|
outw(0, ioaddr);
|
|
}
|
|
|
|
#ifdef MODULE
|
|
|
|
static struct net_device *this_device;
|
|
static int io = 0x300;
|
|
static int irq;
|
|
static int dma;
|
|
static int mem;
|
|
MODULE_LICENSE("GPL");
|
|
|
|
int init_module(void)
|
|
{
|
|
struct net_device *dev;
|
|
int result;
|
|
|
|
if (io == 0)
|
|
printk(KERN_WARNING "%s: You shouldn't use auto-probing with insmod!\n",
|
|
cardname);
|
|
dev = alloc_etherdev(sizeof(struct net_local));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
/* Copy the parameters from insmod into the device structure. */
|
|
dev->base_addr = io;
|
|
dev->irq = irq;
|
|
dev->dma = dma;
|
|
dev->mem_start = mem;
|
|
if (do_netcard_probe(dev) == 0) {
|
|
if (register_netdev(dev) == 0)
|
|
this_device = dev;
|
|
return 0;
|
|
}
|
|
cleanup_card(dev);
|
|
}
|
|
free_netdev(dev);
|
|
return -ENXIO;
|
|
}
|
|
|
|
void
|
|
cleanup_module(void)
|
|
{
|
|
unregister_netdev(this_device);
|
|
cleanup_card(this_device);
|
|
free_netdev(this_device);
|
|
}
|
|
|
|
#endif /* MODULE */
|
|
|
|
/*
|
|
* Local variables:
|
|
* compile-command:
|
|
* gcc -D__KERNEL__ -Wall -Wstrict-prototypes -Wwrite-strings
|
|
* -Wredundant-decls -O2 -m486 -c skeleton.c
|
|
* version-control: t
|
|
* kept-new-versions: 5
|
|
* tab-width: 4
|
|
* c-indent-level: 4
|
|
* End:
|
|
*/
|