forked from Minki/linux
c1b1418a66
rio_device_id are not supposed to change at runtime. rio driver is working with const 'id_table'. So mark the non-const rio_device_id structs as const. Link: http://lkml.kernel.org/r/1503734627-6058-2-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-3-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-4-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-5-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-6-git-send-email-arvind.yadav.cs@gmail.com Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
495 lines
12 KiB
C
495 lines
12 KiB
C
/*
|
|
* IDT CPS Gen.2 Serial RapidIO switch family support
|
|
*
|
|
* Copyright 2010 Integrated Device Technology, Inc.
|
|
* Alexandre Bounine <alexandre.bounine@idt.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/stat.h>
|
|
#include <linux/module.h>
|
|
#include <linux/rio.h>
|
|
#include <linux/rio_drv.h>
|
|
#include <linux/rio_ids.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/page.h>
|
|
#include "../rio.h"
|
|
|
|
#define LOCAL_RTE_CONF_DESTID_SEL 0x010070
|
|
#define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f
|
|
|
|
#define IDT_LT_ERR_REPORT_EN 0x03100c
|
|
|
|
#define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40)
|
|
#define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04
|
|
|
|
#define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40)
|
|
#define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c
|
|
#define IDT_PORT_INIT_TX_ACQUIRED 0x00000020
|
|
|
|
#define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100)
|
|
#define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10
|
|
|
|
#define IDT_DEV_CTRL_1 0xf2000c
|
|
#define IDT_DEV_CTRL_1_GENPW 0x02000000
|
|
#define IDT_DEV_CTRL_1_PRSTBEH 0x00000001
|
|
|
|
#define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008
|
|
#define IDT_CFGBLK_ERR_REPORT 0xf20014
|
|
#define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002
|
|
|
|
#define IDT_AUX_PORT_ERR_CAP_EN 0x020000
|
|
#define IDT_AUX_ERR_REPORT_EN 0xf20018
|
|
#define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002
|
|
#define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001
|
|
|
|
#define IDT_ISLTL_ADDRESS_CAP 0x021014
|
|
|
|
#define IDT_RIO_DOMAIN 0xf20020
|
|
#define IDT_RIO_DOMAIN_MASK 0x000000ff
|
|
|
|
#define IDT_PW_INFO_CSR 0xf20024
|
|
|
|
#define IDT_SOFT_RESET 0xf20040
|
|
#define IDT_SOFT_RESET_REQ 0x00030097
|
|
|
|
#define IDT_I2C_MCTRL 0xf20050
|
|
#define IDT_I2C_MCTRL_GENPW 0x04000000
|
|
|
|
#define IDT_JTAG_CTRL 0xf2005c
|
|
#define IDT_JTAG_CTRL_GENPW 0x00000002
|
|
|
|
#define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100)
|
|
#define IDT_LANE_CTRL_BC 0xffff00
|
|
#define IDT_LANE_CTRL_GENPW 0x00200000
|
|
#define IDT_LANE_DFE_1_BC 0xffff18
|
|
#define IDT_LANE_DFE_2_BC 0xffff1c
|
|
|
|
#define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100)
|
|
#define IDT_PORT_OPS_GENPW 0x08000000
|
|
#define IDT_PORT_OPS_PL_ELOG 0x00000040
|
|
#define IDT_PORT_OPS_LL_ELOG 0x00000020
|
|
#define IDT_PORT_OPS_LT_ELOG 0x00000010
|
|
#define IDT_PORT_OPS_BC 0xf4ff04
|
|
|
|
#define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100)
|
|
|
|
#define IDT_ERR_CAP 0xfd0000
|
|
#define IDT_ERR_CAP_LOG_OVERWR 0x00000004
|
|
|
|
#define IDT_ERR_RD 0xfd0004
|
|
|
|
#define IDT_DEFAULT_ROUTE 0xde
|
|
#define IDT_NO_ROUTE 0xdf
|
|
|
|
static int
|
|
idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
|
|
u16 table, u16 route_destid, u8 route_port)
|
|
{
|
|
/*
|
|
* Select routing table to update
|
|
*/
|
|
if (table == RIO_GLOBAL_TABLE)
|
|
table = 0;
|
|
else
|
|
table++;
|
|
|
|
if (route_port == RIO_INVALID_ROUTE)
|
|
route_port = IDT_DEFAULT_ROUTE;
|
|
|
|
rio_mport_write_config_32(mport, destid, hopcount,
|
|
LOCAL_RTE_CONF_DESTID_SEL, table);
|
|
|
|
/*
|
|
* Program destination port for the specified destID
|
|
*/
|
|
rio_mport_write_config_32(mport, destid, hopcount,
|
|
RIO_STD_RTE_CONF_DESTID_SEL_CSR,
|
|
(u32)route_destid);
|
|
|
|
rio_mport_write_config_32(mport, destid, hopcount,
|
|
RIO_STD_RTE_CONF_PORT_SEL_CSR,
|
|
(u32)route_port);
|
|
udelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
|
|
u16 table, u16 route_destid, u8 *route_port)
|
|
{
|
|
u32 result;
|
|
|
|
/*
|
|
* Select routing table to read
|
|
*/
|
|
if (table == RIO_GLOBAL_TABLE)
|
|
table = 0;
|
|
else
|
|
table++;
|
|
|
|
rio_mport_write_config_32(mport, destid, hopcount,
|
|
LOCAL_RTE_CONF_DESTID_SEL, table);
|
|
|
|
rio_mport_write_config_32(mport, destid, hopcount,
|
|
RIO_STD_RTE_CONF_DESTID_SEL_CSR,
|
|
route_destid);
|
|
|
|
rio_mport_read_config_32(mport, destid, hopcount,
|
|
RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
|
|
|
|
if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result)
|
|
*route_port = RIO_INVALID_ROUTE;
|
|
else
|
|
*route_port = (u8)result;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
|
|
u16 table)
|
|
{
|
|
u32 i;
|
|
|
|
/*
|
|
* Select routing table to read
|
|
*/
|
|
if (table == RIO_GLOBAL_TABLE)
|
|
table = 0;
|
|
else
|
|
table++;
|
|
|
|
rio_mport_write_config_32(mport, destid, hopcount,
|
|
LOCAL_RTE_CONF_DESTID_SEL, table);
|
|
|
|
for (i = RIO_STD_RTE_CONF_EXTCFGEN;
|
|
i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) {
|
|
rio_mport_write_config_32(mport, destid, hopcount,
|
|
RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
|
|
rio_mport_write_config_32(mport, destid, hopcount,
|
|
RIO_STD_RTE_CONF_PORT_SEL_CSR,
|
|
(IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) |
|
|
(IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE);
|
|
i += 4;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
|
|
u8 sw_domain)
|
|
{
|
|
/*
|
|
* Switch domain configuration operates only at global level
|
|
*/
|
|
rio_mport_write_config_32(mport, destid, hopcount,
|
|
IDT_RIO_DOMAIN, (u32)sw_domain);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
|
|
u8 *sw_domain)
|
|
{
|
|
u32 regval;
|
|
|
|
/*
|
|
* Switch domain configuration operates only at global level
|
|
*/
|
|
rio_mport_read_config_32(mport, destid, hopcount,
|
|
IDT_RIO_DOMAIN, ®val);
|
|
|
|
*sw_domain = (u8)(regval & 0xff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
idtg2_em_init(struct rio_dev *rdev)
|
|
{
|
|
u32 regval;
|
|
int i, tmp;
|
|
|
|
/*
|
|
* This routine performs device-specific initialization only.
|
|
* All standard EM configuration should be performed at upper level.
|
|
*/
|
|
|
|
pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
|
|
|
|
/* Set Port-Write info CSR: PRIO=3 and CRF=1 */
|
|
rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000);
|
|
|
|
/*
|
|
* Configure LT LAYER error reporting.
|
|
*/
|
|
|
|
/* Enable standard (RIO.p8) error reporting */
|
|
rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN,
|
|
REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR |
|
|
REM_LTL_ERR_UNSUPTR);
|
|
|
|
/* Use Port-Writes for LT layer error reporting.
|
|
* Enable per-port reset
|
|
*/
|
|
rio_read_config_32(rdev, IDT_DEV_CTRL_1, ®val);
|
|
rio_write_config_32(rdev, IDT_DEV_CTRL_1,
|
|
regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH);
|
|
|
|
/*
|
|
* Configure PORT error reporting.
|
|
*/
|
|
|
|
/* Report all RIO.p8 errors supported by device */
|
|
rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037);
|
|
|
|
/* Configure reporting of implementation specific errors/events */
|
|
rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC,
|
|
IDT_PORT_INIT_TX_ACQUIRED);
|
|
|
|
/* Use Port-Writes for port error reporting and enable error logging */
|
|
tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
|
|
for (i = 0; i < tmp; i++) {
|
|
rio_read_config_32(rdev, IDT_PORT_OPS(i), ®val);
|
|
rio_write_config_32(rdev,
|
|
IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW |
|
|
IDT_PORT_OPS_PL_ELOG |
|
|
IDT_PORT_OPS_LL_ELOG |
|
|
IDT_PORT_OPS_LT_ELOG);
|
|
}
|
|
/* Overwrite error log if full */
|
|
rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR);
|
|
|
|
/*
|
|
* Configure LANE error reporting.
|
|
*/
|
|
|
|
/* Disable line error reporting */
|
|
rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0);
|
|
|
|
/* Use Port-Writes for lane error reporting (when enabled)
|
|
* (do per-lane update because lanes may have different configuration)
|
|
*/
|
|
tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16;
|
|
for (i = 0; i < tmp; i++) {
|
|
rio_read_config_32(rdev, IDT_LANE_CTRL(i), ®val);
|
|
rio_write_config_32(rdev, IDT_LANE_CTRL(i),
|
|
regval | IDT_LANE_CTRL_GENPW);
|
|
}
|
|
|
|
/*
|
|
* Configure AUX error reporting.
|
|
*/
|
|
|
|
/* Disable JTAG and I2C Error capture */
|
|
rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0);
|
|
|
|
/* Disable JTAG and I2C Error reporting/logging */
|
|
rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0);
|
|
|
|
/* Disable Port-Write notification from JTAG */
|
|
rio_write_config_32(rdev, IDT_JTAG_CTRL, 0);
|
|
|
|
/* Disable Port-Write notification from I2C */
|
|
rio_read_config_32(rdev, IDT_I2C_MCTRL, ®val);
|
|
rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW);
|
|
|
|
/*
|
|
* Configure CFG_BLK error reporting.
|
|
*/
|
|
|
|
/* Disable Configuration Block error capture */
|
|
rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0);
|
|
|
|
/* Disable Port-Writes for Configuration Block error reporting */
|
|
rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, ®val);
|
|
rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT,
|
|
regval & ~IDT_CFGBLK_ERR_REPORT_GENPW);
|
|
|
|
/* set TVAL = ~50us */
|
|
rio_write_config_32(rdev,
|
|
rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
idtg2_em_handler(struct rio_dev *rdev, u8 portnum)
|
|
{
|
|
u32 regval, em_perrdet, em_ltlerrdet;
|
|
|
|
rio_read_config_32(rdev,
|
|
rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
|
|
if (em_ltlerrdet) {
|
|
/* Service Logical/Transport Layer Error(s) */
|
|
if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) {
|
|
/* Implementation specific error reported */
|
|
rio_read_config_32(rdev,
|
|
IDT_ISLTL_ADDRESS_CAP, ®val);
|
|
|
|
pr_debug("RIO: %s Implementation Specific LTL errors" \
|
|
" 0x%x @(0x%x)\n",
|
|
rio_name(rdev), em_ltlerrdet, regval);
|
|
|
|
/* Clear implementation specific address capture CSR */
|
|
rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0);
|
|
|
|
}
|
|
}
|
|
|
|
rio_read_config_32(rdev,
|
|
rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
|
|
if (em_perrdet) {
|
|
/* Service Port-Level Error(s) */
|
|
if (em_perrdet & REM_PED_IMPL_SPEC) {
|
|
/* Implementation Specific port error reported */
|
|
|
|
/* Get IS errors reported */
|
|
rio_read_config_32(rdev,
|
|
IDT_PORT_ISERR_DET(portnum), ®val);
|
|
|
|
pr_debug("RIO: %s Implementation Specific Port" \
|
|
" errors 0x%x\n", rio_name(rdev), regval);
|
|
|
|
/* Clear all implementation specific events */
|
|
rio_write_config_32(rdev,
|
|
IDT_PORT_ISERR_DET(portnum), 0);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t
|
|
idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct rio_dev *rdev = to_rio_dev(dev);
|
|
ssize_t len = 0;
|
|
u32 regval;
|
|
|
|
while (!rio_read_config_32(rdev, IDT_ERR_RD, ®val)) {
|
|
if (!regval) /* 0 = end of log */
|
|
break;
|
|
len += snprintf(buf + len, PAGE_SIZE - len,
|
|
"%08x\n", regval);
|
|
if (len >= (PAGE_SIZE - 10))
|
|
break;
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
|
|
|
|
static int idtg2_sysfs(struct rio_dev *rdev, bool create)
|
|
{
|
|
struct device *dev = &rdev->dev;
|
|
int err = 0;
|
|
|
|
if (create) {
|
|
/* Initialize sysfs entries */
|
|
err = device_create_file(dev, &dev_attr_errlog);
|
|
if (err)
|
|
dev_err(dev, "Unable create sysfs errlog file\n");
|
|
} else
|
|
device_remove_file(dev, &dev_attr_errlog);
|
|
|
|
return err;
|
|
}
|
|
|
|
static struct rio_switch_ops idtg2_switch_ops = {
|
|
.owner = THIS_MODULE,
|
|
.add_entry = idtg2_route_add_entry,
|
|
.get_entry = idtg2_route_get_entry,
|
|
.clr_table = idtg2_route_clr_table,
|
|
.set_domain = idtg2_set_domain,
|
|
.get_domain = idtg2_get_domain,
|
|
.em_init = idtg2_em_init,
|
|
.em_handle = idtg2_em_handler,
|
|
};
|
|
|
|
static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id)
|
|
{
|
|
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
|
|
|
|
spin_lock(&rdev->rswitch->lock);
|
|
|
|
if (rdev->rswitch->ops) {
|
|
spin_unlock(&rdev->rswitch->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rdev->rswitch->ops = &idtg2_switch_ops;
|
|
|
|
if (rdev->do_enum) {
|
|
/* Ensure that default routing is disabled on startup */
|
|
rio_write_config_32(rdev,
|
|
RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE);
|
|
}
|
|
|
|
spin_unlock(&rdev->rswitch->lock);
|
|
|
|
/* Create device-specific sysfs attributes */
|
|
idtg2_sysfs(rdev, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void idtg2_remove(struct rio_dev *rdev)
|
|
{
|
|
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
|
|
spin_lock(&rdev->rswitch->lock);
|
|
if (rdev->rswitch->ops != &idtg2_switch_ops) {
|
|
spin_unlock(&rdev->rswitch->lock);
|
|
return;
|
|
}
|
|
rdev->rswitch->ops = NULL;
|
|
spin_unlock(&rdev->rswitch->lock);
|
|
/* Remove device-specific sysfs attributes */
|
|
idtg2_sysfs(rdev, false);
|
|
}
|
|
|
|
static const struct rio_device_id idtg2_id_table[] = {
|
|
{RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)},
|
|
{RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)},
|
|
{RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)},
|
|
{RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)},
|
|
{RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)},
|
|
{ 0, } /* terminate list */
|
|
};
|
|
|
|
static struct rio_driver idtg2_driver = {
|
|
.name = "idt_gen2",
|
|
.id_table = idtg2_id_table,
|
|
.probe = idtg2_probe,
|
|
.remove = idtg2_remove,
|
|
};
|
|
|
|
static int __init idtg2_init(void)
|
|
{
|
|
return rio_register_driver(&idtg2_driver);
|
|
}
|
|
|
|
static void __exit idtg2_exit(void)
|
|
{
|
|
pr_debug("RIO: %s\n", __func__);
|
|
rio_unregister_driver(&idtg2_driver);
|
|
pr_debug("RIO: %s done\n", __func__);
|
|
}
|
|
|
|
device_initcall(idtg2_init);
|
|
module_exit(idtg2_exit);
|
|
|
|
MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver");
|
|
MODULE_AUTHOR("Integrated Device Technology, Inc.");
|
|
MODULE_LICENSE("GPL");
|