Madalin Bucur d79e9d7c1e arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode ... The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b520 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii". Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: 3fa395d2c4 ("arm64: dts: add LS1046A DPAA FMan nodes") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2020-03-16 14:58:33 -07:00
..
dts	arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode	2020-03-16 14:58:33 -07:00
.gitignore
install.sh
Makefile	arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'	2020-01-21 16:28:36 +00:00