forked from Minki/linux
a7d403cfd1
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: s.hauer@pengutronix.de Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
1000 lines
23 KiB
C
1000 lines
23 KiB
C
/*
|
|
* linux/drivers/mmc/host/mxcmmc.c - Freescale i.MX MMCI driver
|
|
*
|
|
* This is a driver for the SDHC controller found in Freescale MX2/MX3
|
|
* SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
|
|
* Unlike the hardware found on MX1, this hardware just works and does
|
|
* not need all the quirks found in imxmmc.c, hence the separate driver.
|
|
*
|
|
* Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
|
|
* Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
|
|
*
|
|
* derived from pxamci.c by Russell King
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/dma.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/sizes.h>
|
|
#include <mach/mmc.h>
|
|
|
|
#ifdef CONFIG_ARCH_MX2
|
|
#include <mach/dma-mx1-mx2.h>
|
|
#define HAS_DMA
|
|
#endif
|
|
|
|
#define DRIVER_NAME "mxc-mmc"
|
|
|
|
#define MMC_REG_STR_STP_CLK 0x00
|
|
#define MMC_REG_STATUS 0x04
|
|
#define MMC_REG_CLK_RATE 0x08
|
|
#define MMC_REG_CMD_DAT_CONT 0x0C
|
|
#define MMC_REG_RES_TO 0x10
|
|
#define MMC_REG_READ_TO 0x14
|
|
#define MMC_REG_BLK_LEN 0x18
|
|
#define MMC_REG_NOB 0x1C
|
|
#define MMC_REG_REV_NO 0x20
|
|
#define MMC_REG_INT_CNTR 0x24
|
|
#define MMC_REG_CMD 0x28
|
|
#define MMC_REG_ARG 0x2C
|
|
#define MMC_REG_RES_FIFO 0x34
|
|
#define MMC_REG_BUFFER_ACCESS 0x38
|
|
|
|
#define STR_STP_CLK_RESET (1 << 3)
|
|
#define STR_STP_CLK_START_CLK (1 << 1)
|
|
#define STR_STP_CLK_STOP_CLK (1 << 0)
|
|
|
|
#define STATUS_CARD_INSERTION (1 << 31)
|
|
#define STATUS_CARD_REMOVAL (1 << 30)
|
|
#define STATUS_YBUF_EMPTY (1 << 29)
|
|
#define STATUS_XBUF_EMPTY (1 << 28)
|
|
#define STATUS_YBUF_FULL (1 << 27)
|
|
#define STATUS_XBUF_FULL (1 << 26)
|
|
#define STATUS_BUF_UND_RUN (1 << 25)
|
|
#define STATUS_BUF_OVFL (1 << 24)
|
|
#define STATUS_SDIO_INT_ACTIVE (1 << 14)
|
|
#define STATUS_END_CMD_RESP (1 << 13)
|
|
#define STATUS_WRITE_OP_DONE (1 << 12)
|
|
#define STATUS_DATA_TRANS_DONE (1 << 11)
|
|
#define STATUS_READ_OP_DONE (1 << 11)
|
|
#define STATUS_WR_CRC_ERROR_CODE_MASK (3 << 10)
|
|
#define STATUS_CARD_BUS_CLK_RUN (1 << 8)
|
|
#define STATUS_BUF_READ_RDY (1 << 7)
|
|
#define STATUS_BUF_WRITE_RDY (1 << 6)
|
|
#define STATUS_RESP_CRC_ERR (1 << 5)
|
|
#define STATUS_CRC_READ_ERR (1 << 3)
|
|
#define STATUS_CRC_WRITE_ERR (1 << 2)
|
|
#define STATUS_TIME_OUT_RESP (1 << 1)
|
|
#define STATUS_TIME_OUT_READ (1 << 0)
|
|
#define STATUS_ERR_MASK 0x2f
|
|
|
|
#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1 << 12)
|
|
#define CMD_DAT_CONT_STOP_READWAIT (1 << 11)
|
|
#define CMD_DAT_CONT_START_READWAIT (1 << 10)
|
|
#define CMD_DAT_CONT_BUS_WIDTH_4 (2 << 8)
|
|
#define CMD_DAT_CONT_INIT (1 << 7)
|
|
#define CMD_DAT_CONT_WRITE (1 << 4)
|
|
#define CMD_DAT_CONT_DATA_ENABLE (1 << 3)
|
|
#define CMD_DAT_CONT_RESPONSE_48BIT_CRC (1 << 0)
|
|
#define CMD_DAT_CONT_RESPONSE_136BIT (2 << 0)
|
|
#define CMD_DAT_CONT_RESPONSE_48BIT (3 << 0)
|
|
|
|
#define INT_SDIO_INT_WKP_EN (1 << 18)
|
|
#define INT_CARD_INSERTION_WKP_EN (1 << 17)
|
|
#define INT_CARD_REMOVAL_WKP_EN (1 << 16)
|
|
#define INT_CARD_INSERTION_EN (1 << 15)
|
|
#define INT_CARD_REMOVAL_EN (1 << 14)
|
|
#define INT_SDIO_IRQ_EN (1 << 13)
|
|
#define INT_DAT0_EN (1 << 12)
|
|
#define INT_BUF_READ_EN (1 << 4)
|
|
#define INT_BUF_WRITE_EN (1 << 3)
|
|
#define INT_END_CMD_RES_EN (1 << 2)
|
|
#define INT_WRITE_OP_DONE_EN (1 << 1)
|
|
#define INT_READ_OP_EN (1 << 0)
|
|
|
|
struct mxcmci_host {
|
|
struct mmc_host *mmc;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
int irq;
|
|
int detect_irq;
|
|
int dma;
|
|
int do_dma;
|
|
int default_irq_mask;
|
|
int use_sdio;
|
|
unsigned int power_mode;
|
|
struct imxmmc_platform_data *pdata;
|
|
|
|
struct mmc_request *req;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
|
|
unsigned int dma_nents;
|
|
unsigned int datasize;
|
|
unsigned int dma_dir;
|
|
|
|
u16 rev_no;
|
|
unsigned int cmdat;
|
|
|
|
struct clk *clk;
|
|
|
|
int clock;
|
|
|
|
struct work_struct datawork;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
|
|
|
|
static inline int mxcmci_use_dma(struct mxcmci_host *host)
|
|
{
|
|
return host->do_dma;
|
|
}
|
|
|
|
static void mxcmci_softreset(struct mxcmci_host *host)
|
|
{
|
|
int i;
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "mxcmci_softreset\n");
|
|
|
|
/* reset sequence */
|
|
writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK);
|
|
writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
|
|
host->base + MMC_REG_STR_STP_CLK);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
|
|
|
|
writew(0xff, host->base + MMC_REG_RES_TO);
|
|
}
|
|
|
|
static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned int nob = data->blocks;
|
|
unsigned int blksz = data->blksz;
|
|
unsigned int datasize = nob * blksz;
|
|
#ifdef HAS_DMA
|
|
struct scatterlist *sg;
|
|
int i;
|
|
int ret;
|
|
#endif
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
nob = 0xffff;
|
|
|
|
host->data = data;
|
|
data->bytes_xfered = 0;
|
|
|
|
writew(nob, host->base + MMC_REG_NOB);
|
|
writew(blksz, host->base + MMC_REG_BLK_LEN);
|
|
host->datasize = datasize;
|
|
|
|
#ifdef HAS_DMA
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
if (sg->offset & 3 || sg->length & 3) {
|
|
host->do_dma = 0;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
host->dma_dir = DMA_FROM_DEVICE;
|
|
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
|
|
data->sg_len, host->dma_dir);
|
|
|
|
ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
|
|
datasize,
|
|
host->res->start + MMC_REG_BUFFER_ACCESS,
|
|
DMA_MODE_READ);
|
|
} else {
|
|
host->dma_dir = DMA_TO_DEVICE;
|
|
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
|
|
data->sg_len, host->dma_dir);
|
|
|
|
ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
|
|
datasize,
|
|
host->res->start + MMC_REG_BUFFER_ACCESS,
|
|
DMA_MODE_WRITE);
|
|
}
|
|
|
|
if (ret) {
|
|
dev_err(mmc_dev(host->mmc), "failed to setup DMA : %d\n", ret);
|
|
return ret;
|
|
}
|
|
wmb();
|
|
|
|
imx_dma_enable(host->dma);
|
|
#endif /* HAS_DMA */
|
|
return 0;
|
|
}
|
|
|
|
static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
|
|
unsigned int cmdat)
|
|
{
|
|
u32 int_cntr = host->default_irq_mask;
|
|
unsigned long flags;
|
|
|
|
WARN_ON(host->cmd != NULL);
|
|
host->cmd = cmd;
|
|
|
|
switch (mmc_resp_type(cmd)) {
|
|
case MMC_RSP_R1: /* short CRC, OPCODE */
|
|
case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */
|
|
cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC;
|
|
break;
|
|
case MMC_RSP_R2: /* long 136 bit + CRC */
|
|
cmdat |= CMD_DAT_CONT_RESPONSE_136BIT;
|
|
break;
|
|
case MMC_RSP_R3: /* short */
|
|
cmdat |= CMD_DAT_CONT_RESPONSE_48BIT;
|
|
break;
|
|
case MMC_RSP_NONE:
|
|
break;
|
|
default:
|
|
dev_err(mmc_dev(host->mmc), "unhandled response type 0x%x\n",
|
|
mmc_resp_type(cmd));
|
|
cmd->error = -EINVAL;
|
|
return -EINVAL;
|
|
}
|
|
|
|
int_cntr = INT_END_CMD_RES_EN;
|
|
|
|
if (mxcmci_use_dma(host))
|
|
int_cntr |= INT_READ_OP_EN | INT_WRITE_OP_DONE_EN;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
if (host->use_sdio)
|
|
int_cntr |= INT_SDIO_IRQ_EN;
|
|
writel(int_cntr, host->base + MMC_REG_INT_CNTR);
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
writew(cmd->opcode, host->base + MMC_REG_CMD);
|
|
writel(cmd->arg, host->base + MMC_REG_ARG);
|
|
writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxcmci_finish_request(struct mxcmci_host *host,
|
|
struct mmc_request *req)
|
|
{
|
|
u32 int_cntr = host->default_irq_mask;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
if (host->use_sdio)
|
|
int_cntr |= INT_SDIO_IRQ_EN;
|
|
writel(int_cntr, host->base + MMC_REG_INT_CNTR);
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
host->req = NULL;
|
|
host->cmd = NULL;
|
|
host->data = NULL;
|
|
|
|
mmc_request_done(host->mmc, req);
|
|
}
|
|
|
|
static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int data_error;
|
|
|
|
#ifdef HAS_DMA
|
|
if (mxcmci_use_dma(host)) {
|
|
imx_dma_disable(host->dma);
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents,
|
|
host->dma_dir);
|
|
}
|
|
#endif
|
|
|
|
if (stat & STATUS_ERR_MASK) {
|
|
dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",
|
|
stat);
|
|
if (stat & STATUS_CRC_READ_ERR) {
|
|
dev_err(mmc_dev(host->mmc), "%s: -EILSEQ\n", __func__);
|
|
data->error = -EILSEQ;
|
|
} else if (stat & STATUS_CRC_WRITE_ERR) {
|
|
u32 err_code = (stat >> 9) & 0x3;
|
|
if (err_code == 2) { /* No CRC response */
|
|
dev_err(mmc_dev(host->mmc),
|
|
"%s: No CRC -ETIMEDOUT\n", __func__);
|
|
data->error = -ETIMEDOUT;
|
|
} else {
|
|
dev_err(mmc_dev(host->mmc),
|
|
"%s: -EILSEQ\n", __func__);
|
|
data->error = -EILSEQ;
|
|
}
|
|
} else if (stat & STATUS_TIME_OUT_READ) {
|
|
dev_err(mmc_dev(host->mmc),
|
|
"%s: read -ETIMEDOUT\n", __func__);
|
|
data->error = -ETIMEDOUT;
|
|
} else {
|
|
dev_err(mmc_dev(host->mmc), "%s: -EIO\n", __func__);
|
|
data->error = -EIO;
|
|
}
|
|
} else {
|
|
data->bytes_xfered = host->datasize;
|
|
}
|
|
|
|
data_error = data->error;
|
|
|
|
host->data = NULL;
|
|
|
|
return data_error;
|
|
}
|
|
|
|
static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
|
|
{
|
|
struct mmc_command *cmd = host->cmd;
|
|
int i;
|
|
u32 a, b, c;
|
|
|
|
if (!cmd)
|
|
return;
|
|
|
|
if (stat & STATUS_TIME_OUT_RESP) {
|
|
dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n");
|
|
cmd->error = -ETIMEDOUT;
|
|
} else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
|
|
dev_dbg(mmc_dev(host->mmc), "cmd crc error\n");
|
|
cmd->error = -EILSEQ;
|
|
}
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
for (i = 0; i < 4; i++) {
|
|
a = readw(host->base + MMC_REG_RES_FIFO);
|
|
b = readw(host->base + MMC_REG_RES_FIFO);
|
|
cmd->resp[i] = a << 16 | b;
|
|
}
|
|
} else {
|
|
a = readw(host->base + MMC_REG_RES_FIFO);
|
|
b = readw(host->base + MMC_REG_RES_FIFO);
|
|
c = readw(host->base + MMC_REG_RES_FIFO);
|
|
cmd->resp[0] = a << 24 | b << 8 | c >> 8;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask)
|
|
{
|
|
u32 stat;
|
|
unsigned long timeout = jiffies + HZ;
|
|
|
|
do {
|
|
stat = readl(host->base + MMC_REG_STATUS);
|
|
if (stat & STATUS_ERR_MASK)
|
|
return stat;
|
|
if (time_after(jiffies, timeout)) {
|
|
mxcmci_softreset(host);
|
|
mxcmci_set_clk_rate(host, host->clock);
|
|
return STATUS_TIME_OUT_READ;
|
|
}
|
|
if (stat & mask)
|
|
return 0;
|
|
cpu_relax();
|
|
} while (1);
|
|
}
|
|
|
|
static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes)
|
|
{
|
|
unsigned int stat;
|
|
u32 *buf = _buf;
|
|
|
|
while (bytes > 3) {
|
|
stat = mxcmci_poll_status(host,
|
|
STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
|
|
if (stat)
|
|
return stat;
|
|
*buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS);
|
|
bytes -= 4;
|
|
}
|
|
|
|
if (bytes) {
|
|
u8 *b = (u8 *)buf;
|
|
u32 tmp;
|
|
|
|
stat = mxcmci_poll_status(host,
|
|
STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
|
|
if (stat)
|
|
return stat;
|
|
tmp = readl(host->base + MMC_REG_BUFFER_ACCESS);
|
|
memcpy(b, &tmp, bytes);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes)
|
|
{
|
|
unsigned int stat;
|
|
u32 *buf = _buf;
|
|
|
|
while (bytes > 3) {
|
|
stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
|
|
if (stat)
|
|
return stat;
|
|
writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS);
|
|
bytes -= 4;
|
|
}
|
|
|
|
if (bytes) {
|
|
u8 *b = (u8 *)buf;
|
|
u32 tmp;
|
|
|
|
stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
|
|
if (stat)
|
|
return stat;
|
|
|
|
memcpy(&tmp, b, bytes);
|
|
writel(tmp, host->base + MMC_REG_BUFFER_ACCESS);
|
|
}
|
|
|
|
stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
|
|
if (stat)
|
|
return stat;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxcmci_transfer_data(struct mxcmci_host *host)
|
|
{
|
|
struct mmc_data *data = host->req->data;
|
|
struct scatterlist *sg;
|
|
int stat, i;
|
|
|
|
host->data = data;
|
|
host->datasize = 0;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
stat = mxcmci_pull(host, sg_virt(sg), sg->length);
|
|
if (stat)
|
|
return stat;
|
|
host->datasize += sg->length;
|
|
}
|
|
} else {
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
stat = mxcmci_push(host, sg_virt(sg), sg->length);
|
|
if (stat)
|
|
return stat;
|
|
host->datasize += sg->length;
|
|
}
|
|
stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE);
|
|
if (stat)
|
|
return stat;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void mxcmci_datawork(struct work_struct *work)
|
|
{
|
|
struct mxcmci_host *host = container_of(work, struct mxcmci_host,
|
|
datawork);
|
|
int datastat = mxcmci_transfer_data(host);
|
|
|
|
writel(STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE,
|
|
host->base + MMC_REG_STATUS);
|
|
mxcmci_finish_data(host, datastat);
|
|
|
|
if (host->req->stop) {
|
|
if (mxcmci_start_cmd(host, host->req->stop, 0)) {
|
|
mxcmci_finish_request(host, host->req);
|
|
return;
|
|
}
|
|
} else {
|
|
mxcmci_finish_request(host, host->req);
|
|
}
|
|
}
|
|
|
|
#ifdef HAS_DMA
|
|
static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int data_error;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
data_error = mxcmci_finish_data(host, stat);
|
|
|
|
mxcmci_read_response(host, stat);
|
|
host->cmd = NULL;
|
|
|
|
if (host->req->stop) {
|
|
if (mxcmci_start_cmd(host, host->req->stop, 0)) {
|
|
mxcmci_finish_request(host, host->req);
|
|
return;
|
|
}
|
|
} else {
|
|
mxcmci_finish_request(host, host->req);
|
|
}
|
|
}
|
|
#endif /* HAS_DMA */
|
|
|
|
static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
|
|
{
|
|
mxcmci_read_response(host, stat);
|
|
host->cmd = NULL;
|
|
|
|
if (!host->data && host->req) {
|
|
mxcmci_finish_request(host, host->req);
|
|
return;
|
|
}
|
|
|
|
/* For the DMA case the DMA engine handles the data transfer
|
|
* automatically. For non DMA we have to do it ourselves.
|
|
* Don't do it in interrupt context though.
|
|
*/
|
|
if (!mxcmci_use_dma(host) && host->data)
|
|
schedule_work(&host->datawork);
|
|
|
|
}
|
|
|
|
static irqreturn_t mxcmci_irq(int irq, void *devid)
|
|
{
|
|
struct mxcmci_host *host = devid;
|
|
unsigned long flags;
|
|
bool sdio_irq;
|
|
u32 stat;
|
|
|
|
stat = readl(host->base + MMC_REG_STATUS);
|
|
writel(stat & ~(STATUS_SDIO_INT_ACTIVE | STATUS_DATA_TRANS_DONE |
|
|
STATUS_WRITE_OP_DONE), host->base + MMC_REG_STATUS);
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
sdio_irq = (stat & STATUS_SDIO_INT_ACTIVE) && host->use_sdio;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
#ifdef HAS_DMA
|
|
if (mxcmci_use_dma(host) &&
|
|
(stat & (STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE)))
|
|
writel(STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE,
|
|
host->base + MMC_REG_STATUS);
|
|
#endif
|
|
|
|
if (sdio_irq) {
|
|
writel(STATUS_SDIO_INT_ACTIVE, host->base + MMC_REG_STATUS);
|
|
mmc_signal_sdio_irq(host->mmc);
|
|
}
|
|
|
|
if (stat & STATUS_END_CMD_RESP)
|
|
mxcmci_cmd_done(host, stat);
|
|
|
|
#ifdef HAS_DMA
|
|
if (mxcmci_use_dma(host) &&
|
|
(stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
|
|
mxcmci_data_done(host, stat);
|
|
#endif
|
|
if (host->default_irq_mask &&
|
|
(stat & (STATUS_CARD_INSERTION | STATUS_CARD_REMOVAL)))
|
|
mmc_detect_change(host->mmc, msecs_to_jiffies(200));
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
|
|
{
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
unsigned int cmdat = host->cmdat;
|
|
int error;
|
|
|
|
WARN_ON(host->req != NULL);
|
|
|
|
host->req = req;
|
|
host->cmdat &= ~CMD_DAT_CONT_INIT;
|
|
#ifdef HAS_DMA
|
|
host->do_dma = 1;
|
|
#endif
|
|
if (req->data) {
|
|
error = mxcmci_setup_data(host, req->data);
|
|
if (error) {
|
|
req->cmd->error = error;
|
|
goto out;
|
|
}
|
|
|
|
|
|
cmdat |= CMD_DAT_CONT_DATA_ENABLE;
|
|
|
|
if (req->data->flags & MMC_DATA_WRITE)
|
|
cmdat |= CMD_DAT_CONT_WRITE;
|
|
}
|
|
|
|
error = mxcmci_start_cmd(host, req->cmd, cmdat);
|
|
out:
|
|
if (error)
|
|
mxcmci_finish_request(host, req);
|
|
}
|
|
|
|
static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
|
|
{
|
|
unsigned int divider;
|
|
int prescaler = 0;
|
|
unsigned int clk_in = clk_get_rate(host->clk);
|
|
|
|
while (prescaler <= 0x800) {
|
|
for (divider = 1; divider <= 0xF; divider++) {
|
|
int x;
|
|
|
|
x = (clk_in / (divider + 1));
|
|
|
|
if (prescaler)
|
|
x /= (prescaler * 2);
|
|
|
|
if (x <= clk_ios)
|
|
break;
|
|
}
|
|
if (divider < 0x10)
|
|
break;
|
|
|
|
if (prescaler == 0)
|
|
prescaler = 1;
|
|
else
|
|
prescaler <<= 1;
|
|
}
|
|
|
|
writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE);
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n",
|
|
prescaler, divider, clk_in, clk_ios);
|
|
}
|
|
|
|
static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
#ifdef HAS_DMA
|
|
unsigned int blen;
|
|
/*
|
|
* use burstlen of 64 in 4 bit mode (--> reg value 0)
|
|
* use burstlen of 16 in 1 bit mode (--> reg value 16)
|
|
*/
|
|
if (ios->bus_width == MMC_BUS_WIDTH_4)
|
|
blen = 0;
|
|
else
|
|
blen = 16;
|
|
|
|
imx_dma_config_burstlen(host->dma, blen);
|
|
#endif
|
|
if (ios->bus_width == MMC_BUS_WIDTH_4)
|
|
host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
|
|
else
|
|
host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
|
|
|
|
if (host->power_mode != ios->power_mode) {
|
|
if (host->pdata && host->pdata->setpower)
|
|
host->pdata->setpower(mmc_dev(mmc), ios->vdd);
|
|
host->power_mode = ios->power_mode;
|
|
if (ios->power_mode == MMC_POWER_ON)
|
|
host->cmdat |= CMD_DAT_CONT_INIT;
|
|
}
|
|
|
|
if (ios->clock) {
|
|
mxcmci_set_clk_rate(host, ios->clock);
|
|
writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
|
|
} else {
|
|
writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK);
|
|
}
|
|
|
|
host->clock = ios->clock;
|
|
}
|
|
|
|
static irqreturn_t mxcmci_detect_irq(int irq, void *data)
|
|
{
|
|
struct mmc_host *mmc = data;
|
|
|
|
dev_dbg(mmc_dev(mmc), "%s\n", __func__);
|
|
|
|
mmc_detect_change(mmc, msecs_to_jiffies(250));
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mxcmci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
|
|
if (host->pdata && host->pdata->get_ro)
|
|
return !!host->pdata->get_ro(mmc_dev(mmc));
|
|
/*
|
|
* Board doesn't support read only detection; let the mmc core
|
|
* decide what to do.
|
|
*/
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static void mxcmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
|
{
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
unsigned long flags;
|
|
u32 int_cntr;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
host->use_sdio = enable;
|
|
int_cntr = readl(host->base + MMC_REG_INT_CNTR);
|
|
|
|
if (enable)
|
|
int_cntr |= INT_SDIO_IRQ_EN;
|
|
else
|
|
int_cntr &= ~INT_SDIO_IRQ_EN;
|
|
|
|
writel(int_cntr, host->base + MMC_REG_INT_CNTR);
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card)
|
|
{
|
|
/*
|
|
* MX3 SoCs have a silicon bug which corrupts CRC calculation of
|
|
* multi-block transfers when connected SDIO peripheral doesn't
|
|
* drive the BUSY line as required by the specs.
|
|
* One way to prevent this is to only allow 1-bit transfers.
|
|
*/
|
|
|
|
if (cpu_is_mx3() && card->type == MMC_TYPE_SDIO)
|
|
host->caps &= ~MMC_CAP_4_BIT_DATA;
|
|
else
|
|
host->caps |= MMC_CAP_4_BIT_DATA;
|
|
}
|
|
|
|
static const struct mmc_host_ops mxcmci_ops = {
|
|
.request = mxcmci_request,
|
|
.set_ios = mxcmci_set_ios,
|
|
.get_ro = mxcmci_get_ro,
|
|
.enable_sdio_irq = mxcmci_enable_sdio_irq,
|
|
.init_card = mxcmci_init_card,
|
|
};
|
|
|
|
static int mxcmci_probe(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct mxcmci_host *host = NULL;
|
|
struct resource *iores, *r;
|
|
int ret = 0, irq;
|
|
|
|
printk(KERN_INFO "i.MX SDHC driver\n");
|
|
|
|
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!iores || irq < 0)
|
|
return -EINVAL;
|
|
|
|
r = request_mem_region(iores->start, resource_size(iores), pdev->name);
|
|
if (!r)
|
|
return -EBUSY;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev);
|
|
if (!mmc) {
|
|
ret = -ENOMEM;
|
|
goto out_release_mem;
|
|
}
|
|
|
|
mmc->ops = &mxcmci_ops;
|
|
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
|
|
|
|
/* MMC core transfer sizes tunable parameters */
|
|
mmc->max_hw_segs = 64;
|
|
mmc->max_phys_segs = 64;
|
|
mmc->max_blk_size = 2048;
|
|
mmc->max_blk_count = 65535;
|
|
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
host = mmc_priv(mmc);
|
|
host->base = ioremap(r->start, resource_size(r));
|
|
if (!host->base) {
|
|
ret = -ENOMEM;
|
|
goto out_free;
|
|
}
|
|
|
|
host->mmc = mmc;
|
|
host->pdata = pdev->dev.platform_data;
|
|
spin_lock_init(&host->lock);
|
|
|
|
if (host->pdata && host->pdata->ocr_avail)
|
|
mmc->ocr_avail = host->pdata->ocr_avail;
|
|
else
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
if (host->pdata && host->pdata->dat3_card_detect)
|
|
host->default_irq_mask =
|
|
INT_CARD_INSERTION_EN | INT_CARD_REMOVAL_EN;
|
|
else
|
|
host->default_irq_mask = 0;
|
|
|
|
host->res = r;
|
|
host->irq = irq;
|
|
|
|
host->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(host->clk)) {
|
|
ret = PTR_ERR(host->clk);
|
|
goto out_iounmap;
|
|
}
|
|
clk_enable(host->clk);
|
|
|
|
mxcmci_softreset(host);
|
|
|
|
host->rev_no = readw(host->base + MMC_REG_REV_NO);
|
|
if (host->rev_no != 0x400) {
|
|
ret = -ENODEV;
|
|
dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n",
|
|
host->rev_no);
|
|
goto out_clk_put;
|
|
}
|
|
|
|
mmc->f_min = clk_get_rate(host->clk) >> 16;
|
|
mmc->f_max = clk_get_rate(host->clk) >> 1;
|
|
|
|
/* recommended in data sheet */
|
|
writew(0x2db4, host->base + MMC_REG_READ_TO);
|
|
|
|
writel(host->default_irq_mask, host->base + MMC_REG_INT_CNTR);
|
|
|
|
#ifdef HAS_DMA
|
|
host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
|
|
if (host->dma < 0) {
|
|
dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n");
|
|
ret = -EBUSY;
|
|
goto out_clk_put;
|
|
}
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
|
|
if (!r) {
|
|
ret = -EINVAL;
|
|
goto out_free_dma;
|
|
}
|
|
|
|
ret = imx_dma_config_channel(host->dma,
|
|
IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
|
|
IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
|
|
r->start, 0);
|
|
if (ret) {
|
|
dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n");
|
|
goto out_free_dma;
|
|
}
|
|
#endif
|
|
INIT_WORK(&host->datawork, mxcmci_datawork);
|
|
|
|
ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host);
|
|
if (ret)
|
|
goto out_free_dma;
|
|
|
|
platform_set_drvdata(pdev, mmc);
|
|
|
|
if (host->pdata && host->pdata->init) {
|
|
ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq,
|
|
host->mmc);
|
|
if (ret)
|
|
goto out_free_irq;
|
|
}
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
return 0;
|
|
|
|
out_free_irq:
|
|
free_irq(host->irq, host);
|
|
out_free_dma:
|
|
#ifdef HAS_DMA
|
|
imx_dma_free(host->dma);
|
|
#endif
|
|
out_clk_put:
|
|
clk_disable(host->clk);
|
|
clk_put(host->clk);
|
|
out_iounmap:
|
|
iounmap(host->base);
|
|
out_free:
|
|
mmc_free_host(mmc);
|
|
out_release_mem:
|
|
release_mem_region(iores->start, resource_size(iores));
|
|
return ret;
|
|
}
|
|
|
|
static int mxcmci_remove(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
mmc_remove_host(mmc);
|
|
|
|
if (host->pdata && host->pdata->exit)
|
|
host->pdata->exit(&pdev->dev, mmc);
|
|
|
|
free_irq(host->irq, host);
|
|
iounmap(host->base);
|
|
#ifdef HAS_DMA
|
|
imx_dma_free(host->dma);
|
|
#endif
|
|
clk_disable(host->clk);
|
|
clk_put(host->clk);
|
|
|
|
release_mem_region(host->res->start, resource_size(host->res));
|
|
release_resource(host->res);
|
|
|
|
mmc_free_host(mmc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int mxcmci_suspend(struct device *dev)
|
|
{
|
|
struct mmc_host *mmc = dev_get_drvdata(dev);
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
int ret = 0;
|
|
|
|
if (mmc)
|
|
ret = mmc_suspend_host(mmc);
|
|
clk_disable(host->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxcmci_resume(struct device *dev)
|
|
{
|
|
struct mmc_host *mmc = dev_get_drvdata(dev);
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
int ret = 0;
|
|
|
|
clk_enable(host->clk);
|
|
if (mmc)
|
|
ret = mmc_resume_host(mmc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops mxcmci_pm_ops = {
|
|
.suspend = mxcmci_suspend,
|
|
.resume = mxcmci_resume,
|
|
};
|
|
#endif
|
|
|
|
static struct platform_driver mxcmci_driver = {
|
|
.probe = mxcmci_probe,
|
|
.remove = mxcmci_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
#ifdef CONFIG_PM
|
|
.pm = &mxcmci_pm_ops,
|
|
#endif
|
|
}
|
|
};
|
|
|
|
static int __init mxcmci_init(void)
|
|
{
|
|
return platform_driver_register(&mxcmci_driver);
|
|
}
|
|
|
|
static void __exit mxcmci_exit(void)
|
|
{
|
|
platform_driver_unregister(&mxcmci_driver);
|
|
}
|
|
|
|
module_init(mxcmci_init);
|
|
module_exit(mxcmci_exit);
|
|
|
|
MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
|
|
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:imx-mmc");
|