forked from Minki/linux
02d9bd05dc
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So technically there's no need for a driver to export the OF table since currently it's not used. In fact, the I2C device ID table is mandatory for I2C drivers since a i2c_device_id is passed to the driver's probe function even if the I2C core used the OF table to match the driver. And since the I2C core uses different tables, OF-only drivers needs to have duplicated data that has to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. To avoid the above, the I2C core behavior may be changed in the future to not require an I2C device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table to prevent breaking module autoloading if that happens. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
594 lines
14 KiB
C
594 lines
14 KiB
C
/*
|
|
* Copyright (C) 2012 Samsung Electronics Co.Ltd
|
|
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/mms114.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Write only registers */
|
|
#define MMS114_MODE_CONTROL 0x01
|
|
#define MMS114_OPERATION_MODE_MASK 0xE
|
|
#define MMS114_ACTIVE (1 << 1)
|
|
|
|
#define MMS114_XY_RESOLUTION_H 0x02
|
|
#define MMS114_X_RESOLUTION 0x03
|
|
#define MMS114_Y_RESOLUTION 0x04
|
|
#define MMS114_CONTACT_THRESHOLD 0x05
|
|
#define MMS114_MOVING_THRESHOLD 0x06
|
|
|
|
/* Read only registers */
|
|
#define MMS114_PACKET_SIZE 0x0F
|
|
#define MMS114_INFOMATION 0x10
|
|
#define MMS114_TSP_REV 0xF0
|
|
|
|
/* Minimum delay time is 50us between stop and start signal of i2c */
|
|
#define MMS114_I2C_DELAY 50
|
|
|
|
/* 200ms needs after power on */
|
|
#define MMS114_POWERON_DELAY 200
|
|
|
|
/* Touchscreen absolute values */
|
|
#define MMS114_MAX_AREA 0xff
|
|
|
|
#define MMS114_MAX_TOUCH 10
|
|
#define MMS114_PACKET_NUM 8
|
|
|
|
/* Touch type */
|
|
#define MMS114_TYPE_NONE 0
|
|
#define MMS114_TYPE_TOUCHSCREEN 1
|
|
#define MMS114_TYPE_TOUCHKEY 2
|
|
|
|
struct mms114_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
struct regulator *core_reg;
|
|
struct regulator *io_reg;
|
|
const struct mms114_platform_data *pdata;
|
|
|
|
/* Use cache data for mode control register(write only) */
|
|
u8 cache_mode_control;
|
|
};
|
|
|
|
struct mms114_touch {
|
|
u8 id:4, reserved_bit4:1, type:2, pressed:1;
|
|
u8 x_hi:4, y_hi:4;
|
|
u8 x_lo;
|
|
u8 y_lo;
|
|
u8 width;
|
|
u8 strength;
|
|
u8 reserved[2];
|
|
} __packed;
|
|
|
|
static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,
|
|
unsigned int len, u8 *val)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
struct i2c_msg xfer[2];
|
|
u8 buf = reg & 0xff;
|
|
int error;
|
|
|
|
if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL)
|
|
BUG();
|
|
|
|
/* Write register: use repeated start */
|
|
xfer[0].addr = client->addr;
|
|
xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART;
|
|
xfer[0].len = 1;
|
|
xfer[0].buf = &buf;
|
|
|
|
/* Read data */
|
|
xfer[1].addr = client->addr;
|
|
xfer[1].flags = I2C_M_RD;
|
|
xfer[1].len = len;
|
|
xfer[1].buf = val;
|
|
|
|
error = i2c_transfer(client->adapter, xfer, 2);
|
|
if (error != 2) {
|
|
dev_err(&client->dev,
|
|
"%s: i2c transfer failed (%d)\n", __func__, error);
|
|
return error < 0 ? error : -EIO;
|
|
}
|
|
udelay(MMS114_I2C_DELAY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mms114_read_reg(struct mms114_data *data, unsigned int reg)
|
|
{
|
|
u8 val;
|
|
int error;
|
|
|
|
if (reg == MMS114_MODE_CONTROL)
|
|
return data->cache_mode_control;
|
|
|
|
error = __mms114_read_reg(data, reg, 1, &val);
|
|
return error < 0 ? error : val;
|
|
}
|
|
|
|
static int mms114_write_reg(struct mms114_data *data, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
u8 buf[2];
|
|
int error;
|
|
|
|
buf[0] = reg & 0xff;
|
|
buf[1] = val & 0xff;
|
|
|
|
error = i2c_master_send(client, buf, 2);
|
|
if (error != 2) {
|
|
dev_err(&client->dev,
|
|
"%s: i2c send failed (%d)\n", __func__, error);
|
|
return error < 0 ? error : -EIO;
|
|
}
|
|
udelay(MMS114_I2C_DELAY);
|
|
|
|
if (reg == MMS114_MODE_CONTROL)
|
|
data->cache_mode_control = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mms114_process_mt(struct mms114_data *data, struct mms114_touch *touch)
|
|
{
|
|
const struct mms114_platform_data *pdata = data->pdata;
|
|
struct i2c_client *client = data->client;
|
|
struct input_dev *input_dev = data->input_dev;
|
|
unsigned int id;
|
|
unsigned int x;
|
|
unsigned int y;
|
|
|
|
if (touch->id > MMS114_MAX_TOUCH) {
|
|
dev_err(&client->dev, "Wrong touch id (%d)\n", touch->id);
|
|
return;
|
|
}
|
|
|
|
if (touch->type != MMS114_TYPE_TOUCHSCREEN) {
|
|
dev_err(&client->dev, "Wrong touch type (%d)\n", touch->type);
|
|
return;
|
|
}
|
|
|
|
id = touch->id - 1;
|
|
x = touch->x_lo | touch->x_hi << 8;
|
|
y = touch->y_lo | touch->y_hi << 8;
|
|
if (x > pdata->x_size || y > pdata->y_size) {
|
|
dev_dbg(&client->dev,
|
|
"Wrong touch coordinates (%d, %d)\n", x, y);
|
|
return;
|
|
}
|
|
|
|
if (pdata->x_invert)
|
|
x = pdata->x_size - x;
|
|
if (pdata->y_invert)
|
|
y = pdata->y_size - y;
|
|
|
|
dev_dbg(&client->dev,
|
|
"id: %d, type: %d, pressed: %d, x: %d, y: %d, width: %d, strength: %d\n",
|
|
id, touch->type, touch->pressed,
|
|
x, y, touch->width, touch->strength);
|
|
|
|
input_mt_slot(input_dev, id);
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, touch->pressed);
|
|
|
|
if (touch->pressed) {
|
|
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, touch->width);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
|
|
input_report_abs(input_dev, ABS_MT_PRESSURE, touch->strength);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t mms114_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mms114_data *data = dev_id;
|
|
struct input_dev *input_dev = data->input_dev;
|
|
struct mms114_touch touch[MMS114_MAX_TOUCH];
|
|
int packet_size;
|
|
int touch_size;
|
|
int index;
|
|
int error;
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
if (!input_dev->users) {
|
|
mutex_unlock(&input_dev->mutex);
|
|
goto out;
|
|
}
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
|
|
if (packet_size <= 0)
|
|
goto out;
|
|
|
|
touch_size = packet_size / MMS114_PACKET_NUM;
|
|
|
|
error = __mms114_read_reg(data, MMS114_INFOMATION, packet_size,
|
|
(u8 *)touch);
|
|
if (error < 0)
|
|
goto out;
|
|
|
|
for (index = 0; index < touch_size; index++)
|
|
mms114_process_mt(data, touch + index);
|
|
|
|
input_mt_report_pointer_emulation(data->input_dev, true);
|
|
input_sync(data->input_dev);
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mms114_set_active(struct mms114_data *data, bool active)
|
|
{
|
|
int val;
|
|
|
|
val = mms114_read_reg(data, MMS114_MODE_CONTROL);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
val &= ~MMS114_OPERATION_MODE_MASK;
|
|
|
|
/* If active is false, sleep mode */
|
|
if (active)
|
|
val |= MMS114_ACTIVE;
|
|
|
|
return mms114_write_reg(data, MMS114_MODE_CONTROL, val);
|
|
}
|
|
|
|
static int mms114_get_version(struct mms114_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
u8 buf[6];
|
|
int error;
|
|
|
|
error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
dev_info(dev, "TSP Rev: 0x%x, HW Rev: 0x%x, Firmware Ver: 0x%x\n",
|
|
buf[0], buf[1], buf[3]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mms114_setup_regs(struct mms114_data *data)
|
|
{
|
|
const struct mms114_platform_data *pdata = data->pdata;
|
|
int val;
|
|
int error;
|
|
|
|
error = mms114_get_version(data);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
error = mms114_set_active(data, true);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
val = (pdata->x_size >> 8) & 0xf;
|
|
val |= ((pdata->y_size >> 8) & 0xf) << 4;
|
|
error = mms114_write_reg(data, MMS114_XY_RESOLUTION_H, val);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
val = pdata->x_size & 0xff;
|
|
error = mms114_write_reg(data, MMS114_X_RESOLUTION, val);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
val = pdata->y_size & 0xff;
|
|
error = mms114_write_reg(data, MMS114_Y_RESOLUTION, val);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
if (pdata->contact_threshold) {
|
|
error = mms114_write_reg(data, MMS114_CONTACT_THRESHOLD,
|
|
pdata->contact_threshold);
|
|
if (error < 0)
|
|
return error;
|
|
}
|
|
|
|
if (pdata->moving_threshold) {
|
|
error = mms114_write_reg(data, MMS114_MOVING_THRESHOLD,
|
|
pdata->moving_threshold);
|
|
if (error < 0)
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mms114_start(struct mms114_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int error;
|
|
|
|
error = regulator_enable(data->core_reg);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to enable avdd: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = regulator_enable(data->io_reg);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to enable vdd: %d\n", error);
|
|
regulator_disable(data->core_reg);
|
|
return error;
|
|
}
|
|
|
|
mdelay(MMS114_POWERON_DELAY);
|
|
|
|
error = mms114_setup_regs(data);
|
|
if (error < 0) {
|
|
regulator_disable(data->io_reg);
|
|
regulator_disable(data->core_reg);
|
|
return error;
|
|
}
|
|
|
|
if (data->pdata->cfg_pin)
|
|
data->pdata->cfg_pin(true);
|
|
|
|
enable_irq(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mms114_stop(struct mms114_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int error;
|
|
|
|
disable_irq(client->irq);
|
|
|
|
if (data->pdata->cfg_pin)
|
|
data->pdata->cfg_pin(false);
|
|
|
|
error = regulator_disable(data->io_reg);
|
|
if (error)
|
|
dev_warn(&client->dev, "Failed to disable vdd: %d\n", error);
|
|
|
|
error = regulator_disable(data->core_reg);
|
|
if (error)
|
|
dev_warn(&client->dev, "Failed to disable avdd: %d\n", error);
|
|
}
|
|
|
|
static int mms114_input_open(struct input_dev *dev)
|
|
{
|
|
struct mms114_data *data = input_get_drvdata(dev);
|
|
|
|
return mms114_start(data);
|
|
}
|
|
|
|
static void mms114_input_close(struct input_dev *dev)
|
|
{
|
|
struct mms114_data *data = input_get_drvdata(dev);
|
|
|
|
mms114_stop(data);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct mms114_platform_data *mms114_parse_dt(struct device *dev)
|
|
{
|
|
struct mms114_platform_data *pdata;
|
|
struct device_node *np = dev->of_node;
|
|
|
|
if (!np)
|
|
return NULL;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata) {
|
|
dev_err(dev, "failed to allocate platform data\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "x-size", &pdata->x_size)) {
|
|
dev_err(dev, "failed to get x-size property\n");
|
|
return NULL;
|
|
};
|
|
|
|
if (of_property_read_u32(np, "y-size", &pdata->y_size)) {
|
|
dev_err(dev, "failed to get y-size property\n");
|
|
return NULL;
|
|
};
|
|
|
|
of_property_read_u32(np, "contact-threshold",
|
|
&pdata->contact_threshold);
|
|
of_property_read_u32(np, "moving-threshold",
|
|
&pdata->moving_threshold);
|
|
|
|
if (of_find_property(np, "x-invert", NULL))
|
|
pdata->x_invert = true;
|
|
if (of_find_property(np, "y-invert", NULL))
|
|
pdata->y_invert = true;
|
|
|
|
return pdata;
|
|
}
|
|
#else
|
|
static inline struct mms114_platform_data *mms114_parse_dt(struct device *dev)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
static int mms114_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
const struct mms114_platform_data *pdata;
|
|
struct mms114_data *data;
|
|
struct input_dev *input_dev;
|
|
int error;
|
|
|
|
pdata = dev_get_platdata(&client->dev);
|
|
if (!pdata)
|
|
pdata = mms114_parse_dt(&client->dev);
|
|
|
|
if (!pdata) {
|
|
dev_err(&client->dev, "Need platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_PROTOCOL_MANGLING)) {
|
|
dev_err(&client->dev,
|
|
"Need i2c bus that supports protocol mangling\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(struct mms114_data),
|
|
GFP_KERNEL);
|
|
input_dev = devm_input_allocate_device(&client->dev);
|
|
if (!data || !input_dev) {
|
|
dev_err(&client->dev, "Failed to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
data->client = client;
|
|
data->input_dev = input_dev;
|
|
data->pdata = pdata;
|
|
|
|
input_dev->name = "MELFAS MMS114 Touchscreen";
|
|
input_dev->id.bustype = BUS_I2C;
|
|
input_dev->dev.parent = &client->dev;
|
|
input_dev->open = mms114_input_open;
|
|
input_dev->close = mms114_input_close;
|
|
|
|
__set_bit(EV_ABS, input_dev->evbit);
|
|
__set_bit(EV_KEY, input_dev->evbit);
|
|
__set_bit(BTN_TOUCH, input_dev->keybit);
|
|
input_set_abs_params(input_dev, ABS_X, 0, data->pdata->x_size, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, data->pdata->y_size, 0, 0);
|
|
|
|
/* For multi touch */
|
|
input_mt_init_slots(input_dev, MMS114_MAX_TOUCH, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
|
|
0, MMS114_MAX_AREA, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
|
|
0, data->pdata->x_size, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
|
|
0, data->pdata->y_size, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
|
|
|
|
input_set_drvdata(input_dev, data);
|
|
i2c_set_clientdata(client, data);
|
|
|
|
data->core_reg = devm_regulator_get(&client->dev, "avdd");
|
|
if (IS_ERR(data->core_reg)) {
|
|
error = PTR_ERR(data->core_reg);
|
|
dev_err(&client->dev,
|
|
"Unable to get the Core regulator (%d)\n", error);
|
|
return error;
|
|
}
|
|
|
|
data->io_reg = devm_regulator_get(&client->dev, "vdd");
|
|
if (IS_ERR(data->io_reg)) {
|
|
error = PTR_ERR(data->io_reg);
|
|
dev_err(&client->dev,
|
|
"Unable to get the IO regulator (%d)\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
|
|
mms114_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
dev_name(&client->dev), data);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to register interrupt\n");
|
|
return error;
|
|
}
|
|
disable_irq(client->irq);
|
|
|
|
error = input_register_device(data->input_dev);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to register input device\n");
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mms114_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mms114_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
int id;
|
|
|
|
/* Release all touch */
|
|
for (id = 0; id < MMS114_MAX_TOUCH; id++) {
|
|
input_mt_slot(input_dev, id);
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false);
|
|
}
|
|
|
|
input_mt_report_pointer_emulation(input_dev, true);
|
|
input_sync(input_dev);
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
if (input_dev->users)
|
|
mms114_stop(data);
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mms114_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mms114_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
int error;
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
if (input_dev->users) {
|
|
error = mms114_start(data);
|
|
if (error < 0) {
|
|
mutex_unlock(&input_dev->mutex);
|
|
return error;
|
|
}
|
|
}
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(mms114_pm_ops, mms114_suspend, mms114_resume);
|
|
|
|
static const struct i2c_device_id mms114_id[] = {
|
|
{ "mms114", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mms114_id);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id mms114_dt_match[] = {
|
|
{ .compatible = "melfas,mms114" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mms114_dt_match);
|
|
#endif
|
|
|
|
static struct i2c_driver mms114_driver = {
|
|
.driver = {
|
|
.name = "mms114",
|
|
.pm = &mms114_pm_ops,
|
|
.of_match_table = of_match_ptr(mms114_dt_match),
|
|
},
|
|
.probe = mms114_probe,
|
|
.id_table = mms114_id,
|
|
};
|
|
|
|
module_i2c_driver(mms114_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
|
|
MODULE_DESCRIPTION("MELFAS mms114 Touchscreen driver");
|
|
MODULE_LICENSE("GPL");
|