forked from Minki/linux
0d0fbf8152
This moves the 32 bit ioctl compatibility handlers for Video4Linux into a new file and adds explicit calls to them to each v4l device driver. Unfortunately, there does not seem to be any code handling the v4l2 ioctls, so quite often the code goes through two separate conversions, first from 32 bit v4l to 64 bit v4l, and from there to 64 bit v4l2. My patch does not change that, so there is still much room for improvement. Also, some drivers have additional ioctl numbers, for which the conversion should be handled internally to that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
322 lines
6.9 KiB
C
322 lines
6.9 KiB
C
/* radio-trust.c - Trust FM Radio card driver for Linux 2.2
|
|
* by Eric Lammerts <eric@scintilla.utwente.nl>
|
|
*
|
|
* Based on radio-aztech.c. Original notes:
|
|
*
|
|
* Adapted to support the Video for Linux API by
|
|
* Russell Kroll <rkroll@exploits.org>. Based on original tuner code by:
|
|
*
|
|
* Quay Ly
|
|
* Donald Song
|
|
* Jason Lewis (jlewis@twilight.vtc.vsc.edu)
|
|
* Scott McGrath (smcgrath@twilight.vtc.vsc.edu)
|
|
* William McGrath (wmcgrath@twilight.vtc.vsc.edu)
|
|
*
|
|
* The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/
|
|
*/
|
|
|
|
#include <stdarg.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/videodev.h>
|
|
#include <linux/config.h> /* CONFIG_RADIO_TRUST_PORT */
|
|
|
|
/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
|
|
|
|
#ifndef CONFIG_RADIO_TRUST_PORT
|
|
#define CONFIG_RADIO_TRUST_PORT -1
|
|
#endif
|
|
|
|
static int io = CONFIG_RADIO_TRUST_PORT;
|
|
static int radio_nr = -1;
|
|
static int ioval = 0xf;
|
|
static __u16 curvol;
|
|
static __u16 curbass;
|
|
static __u16 curtreble;
|
|
static unsigned long curfreq;
|
|
static int curstereo;
|
|
static int curmute;
|
|
|
|
/* i2c addresses */
|
|
#define TDA7318_ADDR 0x88
|
|
#define TSA6060T_ADDR 0xc4
|
|
|
|
#define TR_DELAY do { inb(io); inb(io); inb(io); } while(0)
|
|
#define TR_SET_SCL outb(ioval |= 2, io)
|
|
#define TR_CLR_SCL outb(ioval &= 0xfd, io)
|
|
#define TR_SET_SDA outb(ioval |= 1, io)
|
|
#define TR_CLR_SDA outb(ioval &= 0xfe, io)
|
|
|
|
static void write_i2c(int n, ...)
|
|
{
|
|
unsigned char val, mask;
|
|
va_list args;
|
|
|
|
va_start(args, n);
|
|
|
|
/* start condition */
|
|
TR_SET_SDA;
|
|
TR_SET_SCL;
|
|
TR_DELAY;
|
|
TR_CLR_SDA;
|
|
TR_CLR_SCL;
|
|
TR_DELAY;
|
|
|
|
for(; n; n--) {
|
|
val = va_arg(args, unsigned);
|
|
for(mask = 0x80; mask; mask >>= 1) {
|
|
if(val & mask)
|
|
TR_SET_SDA;
|
|
else
|
|
TR_CLR_SDA;
|
|
TR_SET_SCL;
|
|
TR_DELAY;
|
|
TR_CLR_SCL;
|
|
TR_DELAY;
|
|
}
|
|
/* acknowledge bit */
|
|
TR_SET_SDA;
|
|
TR_SET_SCL;
|
|
TR_DELAY;
|
|
TR_CLR_SCL;
|
|
TR_DELAY;
|
|
}
|
|
|
|
/* stop condition */
|
|
TR_CLR_SDA;
|
|
TR_DELAY;
|
|
TR_SET_SCL;
|
|
TR_DELAY;
|
|
TR_SET_SDA;
|
|
TR_DELAY;
|
|
|
|
va_end(args);
|
|
}
|
|
|
|
static void tr_setvol(__u16 vol)
|
|
{
|
|
curvol = vol / 2048;
|
|
write_i2c(2, TDA7318_ADDR, curvol ^ 0x1f);
|
|
}
|
|
|
|
static int basstreble2chip[15] = {
|
|
0, 1, 2, 3, 4, 5, 6, 7, 14, 13, 12, 11, 10, 9, 8
|
|
};
|
|
|
|
static void tr_setbass(__u16 bass)
|
|
{
|
|
curbass = bass / 4370;
|
|
write_i2c(2, TDA7318_ADDR, 0x60 | basstreble2chip[curbass]);
|
|
}
|
|
|
|
static void tr_settreble(__u16 treble)
|
|
{
|
|
curtreble = treble / 4370;
|
|
write_i2c(2, TDA7318_ADDR, 0x70 | basstreble2chip[curtreble]);
|
|
}
|
|
|
|
static void tr_setstereo(int stereo)
|
|
{
|
|
curstereo = !!stereo;
|
|
ioval = (ioval & 0xfb) | (!curstereo << 2);
|
|
outb(ioval, io);
|
|
}
|
|
|
|
static void tr_setmute(int mute)
|
|
{
|
|
curmute = !!mute;
|
|
ioval = (ioval & 0xf7) | (curmute << 3);
|
|
outb(ioval, io);
|
|
}
|
|
|
|
static int tr_getsigstr(void)
|
|
{
|
|
int i, v;
|
|
|
|
for(i = 0, v = 0; i < 100; i++) v |= inb(io);
|
|
return (v & 1)? 0 : 0xffff;
|
|
}
|
|
|
|
static int tr_getstereo(void)
|
|
{
|
|
/* don't know how to determine it, just return the setting */
|
|
return curstereo;
|
|
}
|
|
|
|
static void tr_setfreq(unsigned long f)
|
|
{
|
|
f /= 160; /* Convert to 10 kHz units */
|
|
f += 1070; /* Add 10.7 MHz IF */
|
|
|
|
write_i2c(5, TSA6060T_ADDR, (f << 1) | 1, f >> 7, 0x60 | ((f >> 15) & 1), 0);
|
|
}
|
|
|
|
static int tr_do_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, void *arg)
|
|
{
|
|
switch(cmd)
|
|
{
|
|
case VIDIOCGCAP:
|
|
{
|
|
struct video_capability *v = arg;
|
|
|
|
memset(v,0,sizeof(*v));
|
|
v->type=VID_TYPE_TUNER;
|
|
v->channels=1;
|
|
v->audios=1;
|
|
strcpy(v->name, "Trust FM Radio");
|
|
|
|
return 0;
|
|
}
|
|
case VIDIOCGTUNER:
|
|
{
|
|
struct video_tuner *v = arg;
|
|
|
|
if(v->tuner) /* Only 1 tuner */
|
|
return -EINVAL;
|
|
|
|
v->rangelow = 87500 * 16;
|
|
v->rangehigh = 108000 * 16;
|
|
v->flags = VIDEO_TUNER_LOW;
|
|
v->mode = VIDEO_MODE_AUTO;
|
|
|
|
v->signal = tr_getsigstr();
|
|
if(tr_getstereo())
|
|
v->flags |= VIDEO_TUNER_STEREO_ON;
|
|
|
|
strcpy(v->name, "FM");
|
|
|
|
return 0;
|
|
}
|
|
case VIDIOCSTUNER:
|
|
{
|
|
struct video_tuner *v = arg;
|
|
if(v->tuner != 0)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
case VIDIOCGFREQ:
|
|
{
|
|
unsigned long *freq = arg;
|
|
*freq = curfreq;
|
|
return 0;
|
|
}
|
|
case VIDIOCSFREQ:
|
|
{
|
|
unsigned long *freq = arg;
|
|
tr_setfreq(*freq);
|
|
return 0;
|
|
}
|
|
case VIDIOCGAUDIO:
|
|
{
|
|
struct video_audio *v = arg;
|
|
|
|
memset(v,0, sizeof(*v));
|
|
v->flags = VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME |
|
|
VIDEO_AUDIO_BASS | VIDEO_AUDIO_TREBLE;
|
|
v->mode = curstereo? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
|
|
v->volume = curvol * 2048;
|
|
v->step = 2048;
|
|
v->bass = curbass * 4370;
|
|
v->treble = curtreble * 4370;
|
|
|
|
strcpy(v->name, "Trust FM Radio");
|
|
return 0;
|
|
}
|
|
case VIDIOCSAUDIO:
|
|
{
|
|
struct video_audio *v = arg;
|
|
|
|
if(v->audio)
|
|
return -EINVAL;
|
|
tr_setvol(v->volume);
|
|
tr_setbass(v->bass);
|
|
tr_settreble(v->treble);
|
|
tr_setstereo(v->mode & VIDEO_SOUND_STEREO);
|
|
tr_setmute(v->flags & VIDEO_AUDIO_MUTE);
|
|
return 0;
|
|
}
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
static int tr_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return video_usercopy(inode, file, cmd, arg, tr_do_ioctl);
|
|
}
|
|
|
|
static struct file_operations trust_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = video_exclusive_open,
|
|
.release = video_exclusive_release,
|
|
.ioctl = tr_ioctl,
|
|
.compat_ioctl = v4l_compat_ioctl32,
|
|
.llseek = no_llseek,
|
|
};
|
|
|
|
static struct video_device trust_radio=
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.name = "Trust FM Radio",
|
|
.type = VID_TYPE_TUNER,
|
|
.hardware = VID_HARDWARE_TRUST,
|
|
.fops = &trust_fops,
|
|
};
|
|
|
|
static int __init trust_init(void)
|
|
{
|
|
if(io == -1) {
|
|
printk(KERN_ERR "You must set an I/O address with io=0x???\n");
|
|
return -EINVAL;
|
|
}
|
|
if(!request_region(io, 2, "Trust FM Radio")) {
|
|
printk(KERN_ERR "trust: port 0x%x already in use\n", io);
|
|
return -EBUSY;
|
|
}
|
|
if(video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr)==-1)
|
|
{
|
|
release_region(io, 2);
|
|
return -EINVAL;
|
|
}
|
|
|
|
printk(KERN_INFO "Trust FM Radio card driver v1.0.\n");
|
|
|
|
write_i2c(2, TDA7318_ADDR, 0x80); /* speaker att. LF = 0 dB */
|
|
write_i2c(2, TDA7318_ADDR, 0xa0); /* speaker att. RF = 0 dB */
|
|
write_i2c(2, TDA7318_ADDR, 0xc0); /* speaker att. LR = 0 dB */
|
|
write_i2c(2, TDA7318_ADDR, 0xe0); /* speaker att. RR = 0 dB */
|
|
write_i2c(2, TDA7318_ADDR, 0x40); /* stereo 1 input, gain = 18.75 dB */
|
|
|
|
tr_setvol(0x8000);
|
|
tr_setbass(0x8000);
|
|
tr_settreble(0x8000);
|
|
tr_setstereo(1);
|
|
|
|
/* mute card - prevents noisy bootups */
|
|
tr_setmute(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_AUTHOR("Eric Lammerts, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
|
|
MODULE_DESCRIPTION("A driver for the Trust FM Radio card.");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(io, int, 0);
|
|
MODULE_PARM_DESC(io, "I/O address of the Trust FM Radio card (0x350 or 0x358)");
|
|
module_param(radio_nr, int, 0);
|
|
|
|
static void __exit cleanup_trust_module(void)
|
|
{
|
|
video_unregister_device(&trust_radio);
|
|
release_region(io, 2);
|
|
}
|
|
|
|
module_init(trust_init);
|
|
module_exit(cleanup_trust_module);
|