forked from Minki/linux
6b918657b7
Add the necessary platform infrastructure to support multiple mmc/sdcard slots all at once through a single controller. Currently, the driver will use the first valid slot it finds and stick with that, but later patches will add support for switching between several slots on the fly. Extend the platform data structure with per-slot information: MMC/SDcard bus width and card detect/write protect pins. This will affect the pin muxing as well as the capabilities announced to the mmc core. Note that board code is now required to supply a mci_platform_data struct to at32_add_device_mci(). Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
96 lines
4.6 KiB
C
96 lines
4.6 KiB
C
/*
|
|
* Atmel MultiMedia Card Interface driver
|
|
*
|
|
* Copyright (C) 2004-2006 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
|
|
#define __DRIVERS_MMC_ATMEL_MCI_H__
|
|
|
|
/* MCI Register Definitions */
|
|
#define MCI_CR 0x0000 /* Control */
|
|
# define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
|
|
# define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
|
|
# define MCI_CR_SWRST ( 1 << 7) /* Software Reset */
|
|
#define MCI_MR 0x0004 /* Mode */
|
|
# define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
|
|
# define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
|
|
# define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
|
|
#define MCI_DTOR 0x0008 /* Data Timeout */
|
|
# define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
|
|
# define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
|
|
#define MCI_SDCR 0x000c /* SD Card / SDIO */
|
|
# define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */
|
|
# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */
|
|
# define MCI_SDCSEL_MASK ( 3 << 0)
|
|
# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */
|
|
# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */
|
|
# define MCI_SDCBUS_MASK ( 3 << 6)
|
|
#define MCI_ARGR 0x0010 /* Command Argument */
|
|
#define MCI_CMDR 0x0014 /* Command */
|
|
# define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
|
|
# define MCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */
|
|
# define MCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */
|
|
# define MCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */
|
|
# define MCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */
|
|
# define MCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */
|
|
# define MCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */
|
|
# define MCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */
|
|
# define MCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */
|
|
# define MCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */
|
|
# define MCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */
|
|
# define MCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */
|
|
# define MCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */
|
|
# define MCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */
|
|
# define MCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */
|
|
# define MCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */
|
|
# define MCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */
|
|
# define MCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */
|
|
# define MCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */
|
|
# define MCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */
|
|
# define MCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */
|
|
# define MCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */
|
|
#define MCI_BLKR 0x0018 /* Block */
|
|
# define MCI_BCNT(x) ((x) << 0) /* Data Block Count */
|
|
# define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
|
|
#define MCI_RSPR 0x0020 /* Response 0 */
|
|
#define MCI_RSPR1 0x0024 /* Response 1 */
|
|
#define MCI_RSPR2 0x0028 /* Response 2 */
|
|
#define MCI_RSPR3 0x002c /* Response 3 */
|
|
#define MCI_RDR 0x0030 /* Receive Data */
|
|
#define MCI_TDR 0x0034 /* Transmit Data */
|
|
#define MCI_SR 0x0040 /* Status */
|
|
#define MCI_IER 0x0044 /* Interrupt Enable */
|
|
#define MCI_IDR 0x0048 /* Interrupt Disable */
|
|
#define MCI_IMR 0x004c /* Interrupt Mask */
|
|
# define MCI_CMDRDY ( 1 << 0) /* Command Ready */
|
|
# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */
|
|
# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */
|
|
# define MCI_BLKE ( 1 << 3) /* Data Block Ended */
|
|
# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
|
|
# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
|
|
# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
|
|
# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
|
|
# define MCI_RINDE ( 1 << 16) /* Response Index Error */
|
|
# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */
|
|
# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */
|
|
# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */
|
|
# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */
|
|
# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */
|
|
# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */
|
|
# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
|
|
# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
|
|
|
|
#define MCI_REGS_SIZE 0x100
|
|
|
|
/* Register access macros */
|
|
#define mci_readl(port,reg) \
|
|
__raw_readl((port)->regs + MCI_##reg)
|
|
#define mci_writel(port,reg,value) \
|
|
__raw_writel((value), (port)->regs + MCI_##reg)
|
|
|
|
#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
|