leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d5ee087a66
linux/arch/arm/boot/dts/stih416.dtsi
Peter Griffin 9b1a6d36c3 stmmac: dwmac-sti: Pass sysconfig register offset via syscon dt property. 
Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161,
we should not be mixing address spaces in the reg property like this driver
currently does. This patch updates the driver, dt docs and also the existing
dt nodes to pass the sysconfig offset in the syscon dt property.

This patch breaks DT compatibility! But this platform is considered WIP,
and is only used by a few developers who are upstreaming support for it.
This change has been done as a single atomic commit to ensure it is
bisectable.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-11 18:53:34 -05:00

450 lines
12 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2012 STMicroelectronics Limited.
* Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include "stih41x.dtsi"
#include "stih416-clock.dtsi"
#include "stih416-pinctrl.dtsi"
#include <dt-bindings/phy/phy-miphy365x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/stih416-resets.h>
/ {
L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xfffe2000 0x1000>;
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
cache-unified;
cache-level = <2>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
ranges;
compatible = "simple-bus";
powerdown: powerdown-controller {
#reset-cells = <1>;
compatible = "st,stih416-powerdown";
};
softreset: softreset-controller {
#reset-cells = <1>;
compatible = "st,stih416-softreset";
};
syscfg_sbc:sbc-syscfg@fe600000{
compatible = "st,stih416-sbc-syscfg", "syscon";
reg = <0xfe600000 0x1000>;
};
syscfg_front:front-syscfg@fee10000{
compatible = "st,stih416-front-syscfg", "syscon";
reg = <0xfee10000 0x1000>;
};
syscfg_rear:rear-syscfg@fe830000{
compatible = "st,stih416-rear-syscfg", "syscon";
reg = <0xfe830000 0x1000>;
};
/* MPE */
syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{
compatible = "st,stih416-fvdp-fe-syscfg", "syscon";
reg = <0xfddf0000 0x1000>;
};
syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{
compatible = "st,stih416-fvdp-lite-syscfg", "syscon";
reg = <0xfd6a0000 0x1000>;
};
syscfg_cpu:cpu-syscfg@fdde0000{
compatible = "st,stih416-cpu-syscfg", "syscon";
reg = <0xfdde0000 0x1000>;
};
syscfg_compo:compo-syscfg@fd320000{
compatible = "st,stih416-compo-syscfg", "syscon";
reg = <0xfd320000 0x1000>;
};
syscfg_transport:transport-syscfg@fd690000{
compatible = "st,stih416-transport-syscfg", "syscon";
reg = <0xfd690000 0x1000>;
};
syscfg_lpm:lpm-syscfg@fe4b5100{
compatible = "st,stih416-lpm-syscfg", "syscon";
reg = <0xfe4b5100 0x8>;
};
serial2: serial@fed32000{
compatible = "st,asc";
status = "disabled";
reg = <0xfed32000 0x2c>;
interrupts = <0 197 0>;
clocks = <&clk_s_a0_ls CLK_ICN_REG>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>;
};
/* SBC_UART1 */
sbc_serial1: serial@fe531000 {
compatible = "st,asc";
status = "disabled";
reg = <0xfe531000 0x2c>;
interrupts = <0 210 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
clocks = <&clk_sysin>;
};
i2c@fed40000 {
compatible = "st,comms-ssc4-i2c";
reg = <0xfed40000 0x110>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_a0_ls CLK_ICN_REG>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_default>;
status = "disabled";
};
i2c@fed41000 {
compatible = "st,comms-ssc4-i2c";
reg = <0xfed41000 0x110>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_a0_ls CLK_ICN_REG>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_default>;
status = "disabled";
};
i2c@fe540000 {
compatible = "st,comms-ssc4-i2c";
reg = <0xfe540000 0x110>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_i2c0_default>;
status = "disabled";
};
i2c@fe541000 {
compatible = "st,comms-ssc4-i2c";
reg = <0xfe541000 0x110>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_i2c1_default>;
status = "disabled";
};
ethernet0: dwmac@fe810000 {
device_type = "network";
compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
status = "disabled";
reg = <0xfe810000 0x8000>;
reg-names = "stmmaceth";
interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
snps,pbl = <32>;
snps,mixed-burst;
st,syscon = <&syscfg_rear 0x8bc>;
resets = <&softreset STIH416_ETH0_SOFTRESET>;
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
device_type = "network";
compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
status = "disabled";
reg = <0xfef08000 0x8000>;
reg-names = "stmmaceth";
interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
snps,pbl = <32>;
snps,mixed-burst;
st,syscon = <&syscfg_sbc 0x7f0>;
resets = <&softreset STIH416_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
};
rc: rc@fe518000 {
compatible = "st,comms-irb";
reg = <0xfe518000 0x234>;
interrupts = <0 203 0>;
rx-mode = "infrared";
clocks = <&clk_sysin>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ir>;
resets = <&softreset STIH416_IRB_SOFTRESET>;
};
/* FSM */
spifsm: spifsm@fe902000 {
compatible = "st,spi-fsm";
reg = <0xfe902000 0x1000>;
pinctrl-0 = <&pinctrl_fsm>;
st,syscfg = <&syscfg_rear>;
st,boot-device-reg = <0x958>;
st,boot-device-spi = <0x1a>;
status = "disabled";
};
keyscan: keyscan@fe4b0000 {
compatible = "st,sti-keyscan";
status = "disabled";
reg = <0xfe4b0000 0x2000>;
interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
clocks = <&clk_sysin>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_keyscan>;
resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
<&softreset STIH416_KEYSCAN_SOFTRESET>;
};
temp0 {
compatible = "st,stih416-sas-thermal";
clock-names = "thermal";
clocks = <&clockgen_c_vcc 14>;
status = "okay";
};
temp1@fdfe8000 {
compatible = "st,stih416-mpe-thermal";
reg = <0xfdfe8000 0x10>;
clocks = <&clockgen_e 3>;
clock-names = "thermal";
interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
status = "okay";
};
mmc0: sdhci@fe81e000 {
compatible = "st,sdhci";
status = "disabled";
reg = <0xfe81e000 0x1000>;
interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0>;
clock-names = "mmc";
clocks = <&clk_s_a1_ls 1>;
};
mmc1: sdhci@fe81f000 {
compatible = "st,sdhci";
status = "disabled";
reg = <0xfe81f000 0x1000>;
interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1>;
clock-names = "mmc";
clocks = <&clk_s_a1_ls 8>;
};
miphy365x_phy: phy@fe382000 {
compatible = "st,miphy365x-phy";
st,syscfg = <&syscfg_rear 0x824 0x828>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
phy_port0: port@fe382000 {
#phy-cells = <1>;
reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
reg-names = "sata", "pcie";
};
phy_port1: port@fe38a000 {
#phy-cells = <1>;
reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;
reg-names = "sata", "pcie";
};
};
sata0: sata@fe380000 {
compatible = "st,sti-ahci";
reg = <0xfe380000 0x1000>;
interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
interrupt-names = "hostc";
phys = <&phy_port0 MIPHY_TYPE_SATA>;
phy-names = "sata-phy";
resets = <&powerdown STIH416_SATA0_POWERDOWN>,
<&softreset STIH416_SATA0_SOFTRESET>;
reset-names = "pwr-dwn", "sw-rst";
clock-names = "ahci_clk";
clocks = <&clk_s_a0_ls CLK_ICN_REG>;
status = "disabled";
};
usb2_phy: phy@0 {
compatible = "st,stih416-usb-phy";
#phy-cells = <0>;
st,syscfg = <&syscfg_rear>;
clocks = <&clk_sysin>;
clock-names = "osc_phy";
};
ehci0: usb@fe1ffe00 {
compatible = "st,st-ehci-300x";
reg = <0xfe1ffe00 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&clk_s_a1_ls 0>,
<&clockgen_b0 0>;
clock-names = "ic", "clk48";
phys = <&usb2_phy>;
phy-names = "usb";
resets = <&powerdown STIH416_USB0_POWERDOWN>,
<&softreset STIH416_USB0_SOFTRESET>;
reset-names = "power", "softreset";
};
ohci0: usb@fe1ffc00 {
compatible = "st,st-ohci-300x";
reg = <0xfe1ffc00 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
clocks = <&clk_s_a1_ls 0>,
<&clockgen_b0 0>;
clock-names = "ic", "clk48";
phys = <&usb2_phy>;
phy-names = "usb";
status = "okay";
resets = <&powerdown STIH416_USB0_POWERDOWN>,
<&softreset STIH416_USB0_SOFTRESET>;
reset-names = "power", "softreset";
};
ehci1: usb@fe203e00 {
compatible = "st,st-ehci-300x";
reg = <0xfe203e00 0x100>;
interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&clk_s_a1_ls 0>,
<&clockgen_b0 0>;
clock-names = "ic", "clk48";
phys = <&usb2_phy>;
phy-names = "usb";
resets = <&powerdown STIH416_USB1_POWERDOWN>,
<&softreset STIH416_USB1_SOFTRESET>;
reset-names = "power", "softreset";
};
ohci1: usb@fe203c00 {
compatible = "st,st-ohci-300x";
reg = <0xfe203c00 0x100>;
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
clocks = <&clk_s_a1_ls 0>,
<&clockgen_b0 0>;
clock-names = "ic", "clk48";
phys = <&usb2_phy>;
phy-names = "usb";
resets = <&powerdown STIH416_USB1_POWERDOWN>,
<&softreset STIH416_USB1_SOFTRESET>;
reset-names = "power", "softreset";
};
ehci2: usb@fe303e00 {
compatible = "st,st-ehci-300x";
reg = <0xfe303e00 0x100>;
interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&clk_s_a1_ls 0>,
<&clockgen_b0 0>;
clock-names = "ic", "clk48";
phys = <&usb2_phy>;
phy-names = "usb";
resets = <&powerdown STIH416_USB2_POWERDOWN>,
<&softreset STIH416_USB2_SOFTRESET>;
reset-names = "power", "softreset";
};
ohci2: usb@fe303c00 {
compatible = "st,st-ohci-300x";
reg = <0xfe303c00 0x100>;
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
clocks = <&clk_s_a1_ls 0>,
<&clockgen_b0 0>;
clock-names = "ic", "clk48";
phys = <&usb2_phy>;
phy-names = "usb";
resets = <&powerdown STIH416_USB2_POWERDOWN>,
<&softreset STIH416_USB2_SOFTRESET>;
reset-names = "power", "softreset";
};
ehci3: usb@fe343e00 {
compatible = "st,st-ehci-300x";
reg = <0xfe343e00 0x100>;
interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
clocks = <&clk_s_a1_ls 0>,
<&clockgen_b0 0>;
clock-names = "ic", "clk48";
phys = <&usb2_phy>;
phy-names = "usb";
resets = <&powerdown STIH416_USB3_POWERDOWN>,
<&softreset STIH416_USB3_SOFTRESET>;
reset-names = "power", "softreset";
};
ohci3: usb@fe343c00 {
compatible = "st,st-ohci-300x";
reg = <0xfe343c00 0x100>;
interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
clocks = <&clk_s_a1_ls 0>,
<&clockgen_b0 0>;
clock-names = "ic", "clk48";
phys = <&usb2_phy>;
phy-names = "usb";
resets = <&powerdown STIH416_USB3_POWERDOWN>,
<&softreset STIH416_USB3_SOFTRESET>;
reset-names = "power", "softreset";
};
};
};
Reference in New Issue View Git Blame Copy Permalink