forked from Minki/linux
d453b87612
Since fd5f92b
("HID: wacom: reuse wacom_parse_and_register() in
wireless_work"), wacom->shared->type is not set.
Send the information of the battery if we have one.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
3582 lines
112 KiB
C
3582 lines
112 KiB
C
/*
|
|
* drivers/input/tablet/wacom_wac.c
|
|
*
|
|
* USB Wacom tablet support - Wacom specific code
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include "wacom_wac.h"
|
|
#include "wacom.h"
|
|
#include <linux/input/mt.h>
|
|
|
|
/* resolution for penabled devices */
|
|
#define WACOM_PL_RES 20
|
|
#define WACOM_PENPRTN_RES 40
|
|
#define WACOM_VOLITO_RES 50
|
|
#define WACOM_GRAPHIRE_RES 80
|
|
#define WACOM_INTUOS_RES 100
|
|
#define WACOM_INTUOS3_RES 200
|
|
|
|
/* Newer Cintiq and DTU have an offset between tablet and screen areas */
|
|
#define WACOM_DTU_OFFSET 200
|
|
#define WACOM_CINTIQ_OFFSET 400
|
|
|
|
/*
|
|
* Scale factor relating reported contact size to logical contact area.
|
|
* 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo
|
|
*/
|
|
#define WACOM_CONTACT_AREA_SCALE 2607
|
|
|
|
static void wacom_report_numbered_buttons(struct input_dev *input_dev,
|
|
int button_count, int mask);
|
|
|
|
/*
|
|
* Percent of battery capacity for Graphire.
|
|
* 8th value means AC online and show 100% capacity.
|
|
*/
|
|
static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 };
|
|
|
|
/*
|
|
* Percent of battery capacity for Intuos4 WL, AC has a separate bit.
|
|
*/
|
|
static unsigned short batcap_i4[8] = { 1, 15, 30, 45, 60, 70, 85, 100 };
|
|
|
|
static void wacom_notify_battery(struct wacom_wac *wacom_wac,
|
|
int bat_capacity, bool bat_charging, bool bat_connected,
|
|
bool ps_connected)
|
|
{
|
|
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
|
|
bool changed = wacom_wac->battery_capacity != bat_capacity ||
|
|
wacom_wac->bat_charging != bat_charging ||
|
|
wacom_wac->bat_connected != bat_connected ||
|
|
wacom_wac->ps_connected != ps_connected;
|
|
|
|
if (changed) {
|
|
wacom_wac->battery_capacity = bat_capacity;
|
|
wacom_wac->bat_charging = bat_charging;
|
|
wacom_wac->bat_connected = bat_connected;
|
|
wacom_wac->ps_connected = ps_connected;
|
|
|
|
if (wacom->battery)
|
|
power_supply_changed(wacom->battery);
|
|
}
|
|
}
|
|
|
|
static int wacom_penpartner_irq(struct wacom_wac *wacom)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
|
|
switch (data[0]) {
|
|
case 1:
|
|
if (data[5] & 0x80) {
|
|
wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
|
|
wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
|
|
input_report_key(input, wacom->tool[0], 1);
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
|
|
input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
|
|
input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
|
|
input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
|
|
input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127));
|
|
input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
|
|
} else {
|
|
input_report_key(input, wacom->tool[0], 0);
|
|
input_report_abs(input, ABS_MISC, 0); /* report tool id */
|
|
input_report_abs(input, ABS_PRESSURE, -1);
|
|
input_report_key(input, BTN_TOUCH, 0);
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
input_report_key(input, BTN_TOOL_PEN, 1);
|
|
input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
|
|
input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
|
|
input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
|
|
input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
|
|
input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
|
|
input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
|
|
break;
|
|
|
|
default:
|
|
dev_dbg(input->dev.parent,
|
|
"%s: received unknown report #%d\n", __func__, data[0]);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_pl_irq(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
int prox, pressure;
|
|
|
|
if (data[0] != WACOM_REPORT_PENABLED) {
|
|
dev_dbg(input->dev.parent,
|
|
"%s: received unknown report #%d\n", __func__, data[0]);
|
|
return 0;
|
|
}
|
|
|
|
prox = data[1] & 0x40;
|
|
|
|
if (!wacom->id[0]) {
|
|
if ((data[0] & 0x10) || (data[4] & 0x20)) {
|
|
wacom->tool[0] = BTN_TOOL_RUBBER;
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
}
|
|
else {
|
|
wacom->tool[0] = BTN_TOOL_PEN;
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
}
|
|
}
|
|
|
|
/* If the eraser is in prox, STYLUS2 is always set. If we
|
|
* mis-detected the type and notice that STYLUS2 isn't set
|
|
* then force the eraser out of prox and let the pen in.
|
|
*/
|
|
if (wacom->tool[0] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
|
|
input_report_key(input, BTN_TOOL_RUBBER, 0);
|
|
input_report_abs(input, ABS_MISC, 0);
|
|
input_sync(input);
|
|
wacom->tool[0] = BTN_TOOL_PEN;
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
}
|
|
|
|
pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
|
|
if (features->pressure_max > 255)
|
|
pressure = (pressure << 1) | ((data[4] >> 6) & 1);
|
|
pressure += (features->pressure_max + 1) / 2;
|
|
|
|
input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
|
|
input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
|
|
input_report_abs(input, ABS_PRESSURE, pressure);
|
|
|
|
input_report_key(input, BTN_TOUCH, data[4] & 0x08);
|
|
input_report_key(input, BTN_STYLUS, data[4] & 0x10);
|
|
/* Only allow the stylus2 button to be reported for the pen tool. */
|
|
input_report_key(input, BTN_STYLUS2, (wacom->tool[0] == BTN_TOOL_PEN) && (data[4] & 0x20));
|
|
|
|
if (!prox)
|
|
wacom->id[0] = 0;
|
|
input_report_key(input, wacom->tool[0], prox);
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]);
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_ptu_irq(struct wacom_wac *wacom)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
|
|
if (data[0] != WACOM_REPORT_PENABLED) {
|
|
dev_dbg(input->dev.parent,
|
|
"%s: received unknown report #%d\n", __func__, data[0]);
|
|
return 0;
|
|
}
|
|
|
|
if (data[1] & 0x04) {
|
|
input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20);
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x08);
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
} else {
|
|
input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20);
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x01);
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
}
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
|
|
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
|
|
input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
|
|
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_dtu_irq(struct wacom_wac *wacom)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
int prox = data[1] & 0x20;
|
|
|
|
dev_dbg(input->dev.parent,
|
|
"%s: received report #%d", __func__, data[0]);
|
|
|
|
if (prox) {
|
|
/* Going into proximity select tool */
|
|
wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
|
|
if (wacom->tool[0] == BTN_TOOL_PEN)
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
else
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
}
|
|
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
|
|
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
|
|
input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]);
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
|
|
if (!prox) /* out-prox */
|
|
wacom->id[0] = 0;
|
|
input_report_key(input, wacom->tool[0], prox);
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]);
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_dtus_irq(struct wacom_wac *wacom)
|
|
{
|
|
char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
unsigned short prox, pressure = 0;
|
|
|
|
if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) {
|
|
dev_dbg(input->dev.parent,
|
|
"%s: received unknown report #%d", __func__, data[0]);
|
|
return 0;
|
|
} else if (data[0] == WACOM_REPORT_DTUSPAD) {
|
|
input = wacom->pad_input;
|
|
input_report_key(input, BTN_0, (data[1] & 0x01));
|
|
input_report_key(input, BTN_1, (data[1] & 0x02));
|
|
input_report_key(input, BTN_2, (data[1] & 0x04));
|
|
input_report_key(input, BTN_3, (data[1] & 0x08));
|
|
input_report_abs(input, ABS_MISC,
|
|
data[1] & 0x0f ? PAD_DEVICE_ID : 0);
|
|
return 1;
|
|
} else {
|
|
prox = data[1] & 0x80;
|
|
if (prox) {
|
|
switch ((data[1] >> 3) & 3) {
|
|
case 1: /* Rubber */
|
|
wacom->tool[0] = BTN_TOOL_RUBBER;
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
break;
|
|
|
|
case 2: /* Pen */
|
|
wacom->tool[0] = BTN_TOOL_PEN;
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
break;
|
|
}
|
|
}
|
|
|
|
input_report_key(input, BTN_STYLUS, data[1] & 0x20);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 0x40);
|
|
input_report_abs(input, ABS_X, get_unaligned_be16(&data[3]));
|
|
input_report_abs(input, ABS_Y, get_unaligned_be16(&data[5]));
|
|
pressure = ((data[1] & 0x03) << 8) | (data[2] & 0xff);
|
|
input_report_abs(input, ABS_PRESSURE, pressure);
|
|
input_report_key(input, BTN_TOUCH, pressure > 10);
|
|
|
|
if (!prox) /* out-prox */
|
|
wacom->id[0] = 0;
|
|
input_report_key(input, wacom->tool[0], prox);
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
static int wacom_graphire_irq(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
struct input_dev *pad_input = wacom->pad_input;
|
|
int battery_capacity, ps_connected;
|
|
int prox;
|
|
int rw = 0;
|
|
int retval = 0;
|
|
|
|
if (features->type == GRAPHIRE_BT) {
|
|
if (data[0] != WACOM_REPORT_PENABLED_BT) {
|
|
dev_dbg(input->dev.parent,
|
|
"%s: received unknown report #%d\n", __func__,
|
|
data[0]);
|
|
goto exit;
|
|
}
|
|
} else if (data[0] != WACOM_REPORT_PENABLED) {
|
|
dev_dbg(input->dev.parent,
|
|
"%s: received unknown report #%d\n", __func__, data[0]);
|
|
goto exit;
|
|
}
|
|
|
|
prox = data[1] & 0x80;
|
|
if (prox || wacom->id[0]) {
|
|
if (prox) {
|
|
switch ((data[1] >> 5) & 3) {
|
|
|
|
case 0: /* Pen */
|
|
wacom->tool[0] = BTN_TOOL_PEN;
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
break;
|
|
|
|
case 1: /* Rubber */
|
|
wacom->tool[0] = BTN_TOOL_RUBBER;
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
break;
|
|
|
|
case 2: /* Mouse with wheel */
|
|
input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
|
|
/* fall through */
|
|
|
|
case 3: /* Mouse without wheel */
|
|
wacom->tool[0] = BTN_TOOL_MOUSE;
|
|
wacom->id[0] = CURSOR_DEVICE_ID;
|
|
break;
|
|
}
|
|
}
|
|
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
|
|
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
|
|
if (features->type == GRAPHIRE_BT)
|
|
input_report_abs(input, ABS_PRESSURE, data[6] |
|
|
(((__u16) (data[1] & 0x08)) << 5));
|
|
else
|
|
input_report_abs(input, ABS_PRESSURE, data[6] |
|
|
((data[7] & 0x03) << 8));
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x01);
|
|
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
|
|
} else {
|
|
input_report_key(input, BTN_LEFT, data[1] & 0x01);
|
|
input_report_key(input, BTN_RIGHT, data[1] & 0x02);
|
|
if (features->type == WACOM_G4 ||
|
|
features->type == WACOM_MO) {
|
|
input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f);
|
|
rw = (data[7] & 0x04) - (data[7] & 0x03);
|
|
} else if (features->type == GRAPHIRE_BT) {
|
|
/* Compute distance between mouse and tablet */
|
|
rw = 44 - (data[6] >> 2);
|
|
rw = clamp_val(rw, 0, 31);
|
|
input_report_abs(input, ABS_DISTANCE, rw);
|
|
if (((data[1] >> 5) & 3) == 2) {
|
|
/* Mouse with wheel */
|
|
input_report_key(input, BTN_MIDDLE,
|
|
data[1] & 0x04);
|
|
rw = (data[6] & 0x01) ? -1 :
|
|
(data[6] & 0x02) ? 1 : 0;
|
|
} else {
|
|
rw = 0;
|
|
}
|
|
} else {
|
|
input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f);
|
|
rw = -(signed char)data[6];
|
|
}
|
|
input_report_rel(input, REL_WHEEL, rw);
|
|
}
|
|
|
|
if (!prox)
|
|
wacom->id[0] = 0;
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
|
|
input_report_key(input, wacom->tool[0], prox);
|
|
input_sync(input); /* sync last event */
|
|
}
|
|
|
|
/* send pad data */
|
|
switch (features->type) {
|
|
case WACOM_G4:
|
|
prox = data[7] & 0xf8;
|
|
if (prox || wacom->id[1]) {
|
|
wacom->id[1] = PAD_DEVICE_ID;
|
|
input_report_key(pad_input, BTN_BACK, (data[7] & 0x40));
|
|
input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x80));
|
|
rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
|
|
input_report_rel(pad_input, REL_WHEEL, rw);
|
|
if (!prox)
|
|
wacom->id[1] = 0;
|
|
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
|
|
retval = 1;
|
|
}
|
|
break;
|
|
|
|
case WACOM_MO:
|
|
prox = (data[7] & 0xf8) || data[8];
|
|
if (prox || wacom->id[1]) {
|
|
wacom->id[1] = PAD_DEVICE_ID;
|
|
input_report_key(pad_input, BTN_BACK, (data[7] & 0x08));
|
|
input_report_key(pad_input, BTN_LEFT, (data[7] & 0x20));
|
|
input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x10));
|
|
input_report_key(pad_input, BTN_RIGHT, (data[7] & 0x40));
|
|
input_report_abs(pad_input, ABS_WHEEL, (data[8] & 0x7f));
|
|
if (!prox)
|
|
wacom->id[1] = 0;
|
|
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
|
|
retval = 1;
|
|
}
|
|
break;
|
|
case GRAPHIRE_BT:
|
|
prox = data[7] & 0x03;
|
|
if (prox || wacom->id[1]) {
|
|
wacom->id[1] = PAD_DEVICE_ID;
|
|
input_report_key(pad_input, BTN_0, (data[7] & 0x02));
|
|
input_report_key(pad_input, BTN_1, (data[7] & 0x01));
|
|
if (!prox)
|
|
wacom->id[1] = 0;
|
|
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
|
|
retval = 1;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* Store current battery capacity and power supply state */
|
|
if (features->type == GRAPHIRE_BT) {
|
|
rw = (data[7] >> 2 & 0x07);
|
|
battery_capacity = batcap_gr[rw];
|
|
ps_connected = rw == 7;
|
|
wacom_notify_battery(wacom, battery_capacity, ps_connected,
|
|
1, ps_connected);
|
|
}
|
|
exit:
|
|
return retval;
|
|
}
|
|
|
|
static void wacom_intuos_schedule_prox_event(struct wacom_wac *wacom_wac)
|
|
{
|
|
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
struct hid_report *r;
|
|
struct hid_report_enum *re;
|
|
|
|
re = &(wacom->hdev->report_enum[HID_FEATURE_REPORT]);
|
|
if (features->type == INTUOSHT2)
|
|
r = re->report_id_hash[WACOM_REPORT_INTUOSHT2_ID];
|
|
else
|
|
r = re->report_id_hash[WACOM_REPORT_INTUOS_ID1];
|
|
if (r) {
|
|
hid_hw_request(wacom->hdev, r, HID_REQ_GET_REPORT);
|
|
}
|
|
}
|
|
|
|
static int wacom_intuos_pad(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pad_input;
|
|
int i;
|
|
int buttons = 0, nbuttons = features->numbered_buttons;
|
|
int keys = 0, nkeys = 0;
|
|
int ring1 = 0, ring2 = 0;
|
|
int strip1 = 0, strip2 = 0;
|
|
bool prox = false;
|
|
|
|
/* pad packets. Works as a second tool and is always in prox */
|
|
if (!(data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD ||
|
|
data[0] == WACOM_REPORT_CINTIQPAD))
|
|
return 0;
|
|
|
|
if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
|
|
buttons = (data[3] << 1) | (data[2] & 0x01);
|
|
ring1 = data[1];
|
|
} else if (features->type == DTK) {
|
|
buttons = data[6];
|
|
} else if (features->type == WACOM_13HD) {
|
|
buttons = (data[4] << 1) | (data[3] & 0x01);
|
|
} else if (features->type == WACOM_24HD) {
|
|
buttons = (data[8] << 8) | data[6];
|
|
ring1 = data[1];
|
|
ring2 = data[2];
|
|
|
|
/*
|
|
* Three "buttons" are available on the 24HD which are
|
|
* physically implemented as a touchstrip. Each button
|
|
* is approximately 3 bits wide with a 2 bit spacing.
|
|
* The raw touchstrip bits are stored at:
|
|
* ((data[3] & 0x1f) << 8) | data[4])
|
|
*/
|
|
nkeys = 3;
|
|
keys = ((data[3] & 0x1C) ? 1<<2 : 0) |
|
|
((data[4] & 0xE0) ? 1<<1 : 0) |
|
|
((data[4] & 0x07) ? 1<<0 : 0);
|
|
} else if (features->type == WACOM_27QHD) {
|
|
nkeys = 3;
|
|
keys = data[2] & 0x07;
|
|
|
|
input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[4]));
|
|
input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[6]));
|
|
input_report_abs(input, ABS_Z, be16_to_cpup((__be16 *)&data[8]));
|
|
} else if (features->type == CINTIQ_HYBRID) {
|
|
/*
|
|
* Do not send hardware buttons under Android. They
|
|
* are already sent to the system through GPIO (and
|
|
* have different meaning).
|
|
*
|
|
* d-pad right -> data[4] & 0x10
|
|
* d-pad up -> data[4] & 0x20
|
|
* d-pad left -> data[4] & 0x40
|
|
* d-pad down -> data[4] & 0x80
|
|
* d-pad center -> data[3] & 0x01
|
|
*/
|
|
buttons = (data[4] << 1) | (data[3] & 0x01);
|
|
} else if (features->type == CINTIQ_COMPANION_2) {
|
|
/* d-pad right -> data[4] & 0x10
|
|
* d-pad up -> data[4] & 0x20
|
|
* d-pad left -> data[4] & 0x40
|
|
* d-pad down -> data[4] & 0x80
|
|
* d-pad center -> data[3] & 0x01
|
|
*/
|
|
buttons = ((data[2] >> 4) << 7) |
|
|
((data[1] & 0x04) << 6) |
|
|
((data[2] & 0x0F) << 2) |
|
|
(data[1] & 0x03);
|
|
} else if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
|
|
/*
|
|
* ExpressKeys on Intuos5/Intuos Pro have a capacitive sensor in
|
|
* addition to the mechanical switch. Switch data is
|
|
* stored in data[4], capacitive data in data[5].
|
|
*
|
|
* Touch ring mode switch (data[3]) has no capacitive sensor
|
|
*/
|
|
buttons = (data[4] << 1) | (data[3] & 0x01);
|
|
ring1 = data[2];
|
|
} else {
|
|
if (features->type == WACOM_21UX2 || features->type == WACOM_22HD) {
|
|
buttons = (data[8] << 10) | ((data[7] & 0x01) << 9) |
|
|
(data[6] << 1) | (data[5] & 0x01);
|
|
|
|
if (features->type == WACOM_22HD) {
|
|
nkeys = 3;
|
|
keys = data[9] & 0x07;
|
|
}
|
|
} else {
|
|
buttons = ((data[6] & 0x10) << 10) |
|
|
((data[5] & 0x10) << 9) |
|
|
((data[6] & 0x0F) << 4) |
|
|
(data[5] & 0x0F);
|
|
}
|
|
strip1 = ((data[1] & 0x1f) << 8) | data[2];
|
|
strip2 = ((data[3] & 0x1f) << 8) | data[4];
|
|
}
|
|
|
|
prox = (buttons & ~(~0 << nbuttons)) | (keys & ~(~0 << nkeys)) |
|
|
(ring1 & 0x80) | (ring2 & 0x80) | strip1 | strip2;
|
|
|
|
wacom_report_numbered_buttons(input, nbuttons, buttons);
|
|
|
|
for (i = 0; i < nkeys; i++)
|
|
input_report_key(input, KEY_PROG1 + i, keys & (1 << i));
|
|
|
|
input_report_abs(input, ABS_RX, strip1);
|
|
input_report_abs(input, ABS_RY, strip2);
|
|
|
|
input_report_abs(input, ABS_WHEEL, (ring1 & 0x80) ? (ring1 & 0x7f) : 0);
|
|
input_report_abs(input, ABS_THROTTLE, (ring2 & 0x80) ? (ring2 & 0x7f) : 0);
|
|
|
|
input_report_key(input, wacom->tool[1], prox ? 1 : 0);
|
|
input_report_abs(input, ABS_MISC, prox ? PAD_DEVICE_ID : 0);
|
|
|
|
input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_intuos_get_tool_type(int tool_id)
|
|
{
|
|
int tool_type;
|
|
|
|
switch (tool_id) {
|
|
case 0x812: /* Inking pen */
|
|
case 0x801: /* Intuos3 Inking pen */
|
|
case 0x120802: /* Intuos4/5 Inking Pen */
|
|
case 0x012:
|
|
tool_type = BTN_TOOL_PENCIL;
|
|
break;
|
|
|
|
case 0x822: /* Pen */
|
|
case 0x842:
|
|
case 0x852:
|
|
case 0x823: /* Intuos3 Grip Pen */
|
|
case 0x813: /* Intuos3 Classic Pen */
|
|
case 0x885: /* Intuos3 Marker Pen */
|
|
case 0x802: /* Intuos4/5 13HD/24HD General Pen */
|
|
case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */
|
|
case 0x8e2: /* IntuosHT2 pen */
|
|
case 0x022:
|
|
case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */
|
|
case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */
|
|
case 0x160802: /* Cintiq 13HD Pro Pen */
|
|
case 0x180802: /* DTH2242 Pen */
|
|
case 0x100802: /* Intuos4/5 13HD/24HD General Pen */
|
|
tool_type = BTN_TOOL_PEN;
|
|
break;
|
|
|
|
case 0x832: /* Stroke pen */
|
|
case 0x032:
|
|
tool_type = BTN_TOOL_BRUSH;
|
|
break;
|
|
|
|
case 0x007: /* Mouse 4D and 2D */
|
|
case 0x09c:
|
|
case 0x094:
|
|
case 0x017: /* Intuos3 2D Mouse */
|
|
case 0x806: /* Intuos4 Mouse */
|
|
tool_type = BTN_TOOL_MOUSE;
|
|
break;
|
|
|
|
case 0x096: /* Lens cursor */
|
|
case 0x097: /* Intuos3 Lens cursor */
|
|
case 0x006: /* Intuos4 Lens cursor */
|
|
tool_type = BTN_TOOL_LENS;
|
|
break;
|
|
|
|
case 0x82a: /* Eraser */
|
|
case 0x85a:
|
|
case 0x91a:
|
|
case 0xd1a:
|
|
case 0x0fa:
|
|
case 0x82b: /* Intuos3 Grip Pen Eraser */
|
|
case 0x81b: /* Intuos3 Classic Pen Eraser */
|
|
case 0x91b: /* Intuos3 Airbrush Eraser */
|
|
case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */
|
|
case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */
|
|
case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
|
|
case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */
|
|
case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
|
|
case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */
|
|
case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */
|
|
case 0x18080a: /* DTH2242 Eraser */
|
|
case 0x10080a: /* Intuos4/5 13HD/24HD General Pen Eraser */
|
|
tool_type = BTN_TOOL_RUBBER;
|
|
break;
|
|
|
|
case 0xd12:
|
|
case 0x912:
|
|
case 0x112:
|
|
case 0x913: /* Intuos3 Airbrush */
|
|
case 0x902: /* Intuos4/5 13HD/24HD Airbrush */
|
|
case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */
|
|
tool_type = BTN_TOOL_AIRBRUSH;
|
|
break;
|
|
|
|
default: /* Unknown tool */
|
|
tool_type = BTN_TOOL_PEN;
|
|
break;
|
|
}
|
|
return tool_type;
|
|
}
|
|
|
|
static int wacom_intuos_inout(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
int idx = (features->type == INTUOS) ? (data[1] & 0x01) : 0;
|
|
|
|
if (!(((data[1] & 0xfc) == 0xc0) || /* in prox */
|
|
((data[1] & 0xfe) == 0x20) || /* in range */
|
|
((data[1] & 0xfe) == 0x80))) /* out prox */
|
|
return 0;
|
|
|
|
/* Enter report */
|
|
if ((data[1] & 0xfc) == 0xc0) {
|
|
/* serial number of the tool */
|
|
wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
|
|
(data[4] << 20) + (data[5] << 12) +
|
|
(data[6] << 4) + (data[7] >> 4);
|
|
|
|
wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
|
|
((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
|
|
|
|
wacom->tool[idx] = wacom_intuos_get_tool_type(wacom->id[idx]);
|
|
|
|
wacom->shared->stylus_in_proximity = true;
|
|
return 1;
|
|
}
|
|
|
|
/* in Range */
|
|
if ((data[1] & 0xfe) == 0x20) {
|
|
if (features->type != INTUOSHT2)
|
|
wacom->shared->stylus_in_proximity = true;
|
|
|
|
/* in Range while exiting */
|
|
if (wacom->reporting_data) {
|
|
input_report_key(input, BTN_TOUCH, 0);
|
|
input_report_abs(input, ABS_PRESSURE, 0);
|
|
input_report_abs(input, ABS_DISTANCE, wacom->features.distance_max);
|
|
return 2;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* Exit report */
|
|
if ((data[1] & 0xfe) == 0x80) {
|
|
wacom->shared->stylus_in_proximity = false;
|
|
wacom->reporting_data = false;
|
|
|
|
/* don't report exit if we don't know the ID */
|
|
if (!wacom->id[idx])
|
|
return 1;
|
|
|
|
/*
|
|
* Reset all states otherwise we lose the initial states
|
|
* when in-prox next time
|
|
*/
|
|
input_report_abs(input, ABS_X, 0);
|
|
input_report_abs(input, ABS_Y, 0);
|
|
input_report_abs(input, ABS_DISTANCE, 0);
|
|
input_report_abs(input, ABS_TILT_X, 0);
|
|
input_report_abs(input, ABS_TILT_Y, 0);
|
|
if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
|
|
input_report_key(input, BTN_LEFT, 0);
|
|
input_report_key(input, BTN_MIDDLE, 0);
|
|
input_report_key(input, BTN_RIGHT, 0);
|
|
input_report_key(input, BTN_SIDE, 0);
|
|
input_report_key(input, BTN_EXTRA, 0);
|
|
input_report_abs(input, ABS_THROTTLE, 0);
|
|
input_report_abs(input, ABS_RZ, 0);
|
|
} else {
|
|
input_report_abs(input, ABS_PRESSURE, 0);
|
|
input_report_key(input, BTN_STYLUS, 0);
|
|
input_report_key(input, BTN_STYLUS2, 0);
|
|
input_report_key(input, BTN_TOUCH, 0);
|
|
input_report_abs(input, ABS_WHEEL, 0);
|
|
if (features->type >= INTUOS3S)
|
|
input_report_abs(input, ABS_Z, 0);
|
|
}
|
|
input_report_key(input, wacom->tool[idx], 0);
|
|
input_report_abs(input, ABS_MISC, 0); /* reset tool id */
|
|
input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
|
|
wacom->id[idx] = 0;
|
|
return 2;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_remote_irq(struct wacom_wac *wacom_wac, size_t len)
|
|
{
|
|
unsigned char *data = wacom_wac->data;
|
|
struct input_dev *input = wacom_wac->pad_input;
|
|
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
int bat_charging, bat_percent, touch_ring_mode;
|
|
__u32 serial;
|
|
int i;
|
|
|
|
if (data[0] != WACOM_REPORT_REMOTE) {
|
|
dev_dbg(input->dev.parent,
|
|
"%s: received unknown report #%d", __func__, data[0]);
|
|
return 0;
|
|
}
|
|
|
|
serial = data[3] + (data[4] << 8) + (data[5] << 16);
|
|
wacom_wac->id[0] = PAD_DEVICE_ID;
|
|
|
|
input_report_key(input, BTN_0, (data[9] & 0x01));
|
|
input_report_key(input, BTN_1, (data[9] & 0x02));
|
|
input_report_key(input, BTN_2, (data[9] & 0x04));
|
|
input_report_key(input, BTN_3, (data[9] & 0x08));
|
|
input_report_key(input, BTN_4, (data[9] & 0x10));
|
|
input_report_key(input, BTN_5, (data[9] & 0x20));
|
|
input_report_key(input, BTN_6, (data[9] & 0x40));
|
|
input_report_key(input, BTN_7, (data[9] & 0x80));
|
|
|
|
input_report_key(input, BTN_8, (data[10] & 0x01));
|
|
input_report_key(input, BTN_9, (data[10] & 0x02));
|
|
input_report_key(input, BTN_A, (data[10] & 0x04));
|
|
input_report_key(input, BTN_B, (data[10] & 0x08));
|
|
input_report_key(input, BTN_C, (data[10] & 0x10));
|
|
input_report_key(input, BTN_X, (data[10] & 0x20));
|
|
input_report_key(input, BTN_Y, (data[10] & 0x40));
|
|
input_report_key(input, BTN_Z, (data[10] & 0x80));
|
|
|
|
input_report_key(input, BTN_BASE, (data[11] & 0x01));
|
|
input_report_key(input, BTN_BASE2, (data[11] & 0x02));
|
|
|
|
if (data[12] & 0x80)
|
|
input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f));
|
|
else
|
|
input_report_abs(input, ABS_WHEEL, 0);
|
|
|
|
bat_percent = data[7] & 0x7f;
|
|
bat_charging = !!(data[7] & 0x80);
|
|
|
|
if (data[9] | data[10] | (data[11] & 0x03) | data[12])
|
|
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
|
|
else
|
|
input_report_abs(input, ABS_MISC, 0);
|
|
|
|
input_event(input, EV_MSC, MSC_SERIAL, serial);
|
|
|
|
/*Which mode select (LED light) is currently on?*/
|
|
touch_ring_mode = (data[11] & 0xC0) >> 6;
|
|
|
|
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
|
|
if (wacom_wac->serial[i] == serial)
|
|
wacom->led.select[i] = touch_ring_mode;
|
|
}
|
|
|
|
if (!wacom->battery &&
|
|
!(features->quirks & WACOM_QUIRK_BATTERY)) {
|
|
features->quirks |= WACOM_QUIRK_BATTERY;
|
|
INIT_WORK(&wacom->work, wacom_battery_work);
|
|
wacom_schedule_work(wacom_wac);
|
|
}
|
|
|
|
wacom_notify_battery(wacom_wac, bat_percent, bat_charging, 1,
|
|
bat_charging);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_remote_status_irq(struct wacom_wac *wacom_wac, size_t len)
|
|
{
|
|
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
|
|
unsigned char *data = wacom_wac->data;
|
|
int i;
|
|
|
|
if (data[0] != WACOM_REPORT_DEVICE_LIST)
|
|
return 0;
|
|
|
|
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
|
|
int j = i * 6;
|
|
int serial = (data[j+6] << 16) + (data[j+5] << 8) + data[j+4];
|
|
bool connected = data[j+2];
|
|
|
|
if (connected) {
|
|
int k;
|
|
|
|
if (wacom_wac->serial[i] == serial)
|
|
continue;
|
|
|
|
if (wacom_wac->serial[i]) {
|
|
wacom_remote_destroy_attr_group(wacom,
|
|
wacom_wac->serial[i]);
|
|
}
|
|
|
|
/* A remote can pair more than once with an EKR,
|
|
* check to make sure this serial isn't already paired.
|
|
*/
|
|
for (k = 0; k < WACOM_MAX_REMOTES; k++) {
|
|
if (wacom_wac->serial[k] == serial)
|
|
break;
|
|
}
|
|
|
|
if (k < WACOM_MAX_REMOTES) {
|
|
wacom_wac->serial[i] = serial;
|
|
continue;
|
|
}
|
|
wacom_remote_create_attr_group(wacom, serial, i);
|
|
|
|
} else if (wacom_wac->serial[i]) {
|
|
wacom_remote_destroy_attr_group(wacom,
|
|
wacom_wac->serial[i]);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_intuos_general(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
int idx = (features->type == INTUOS) ? (data[1] & 0x01) : 0;
|
|
unsigned char type = (data[1] >> 1) & 0x0F;
|
|
unsigned int x, y, distance, t;
|
|
|
|
if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_CINTIQ &&
|
|
data[0] != WACOM_REPORT_INTUOS_PEN)
|
|
return 0;
|
|
|
|
if (wacom->shared->touch_down)
|
|
return 1;
|
|
|
|
/* don't report events if we don't know the tool ID */
|
|
if (!wacom->id[idx]) {
|
|
/* but reschedule a read of the current tool */
|
|
wacom_intuos_schedule_prox_event(wacom);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* don't report events for invalid data
|
|
*/
|
|
/* older I4 styli don't work with new Cintiqs */
|
|
if ((!((wacom->id[idx] >> 20) & 0x01) &&
|
|
(features->type == WACOM_21UX2)) ||
|
|
/* Only large Intuos support Lense Cursor */
|
|
(wacom->tool[idx] == BTN_TOOL_LENS &&
|
|
(features->type == INTUOS3 ||
|
|
features->type == INTUOS3S ||
|
|
features->type == INTUOS4 ||
|
|
features->type == INTUOS4S ||
|
|
features->type == INTUOS5 ||
|
|
features->type == INTUOS5S ||
|
|
features->type == INTUOSPM ||
|
|
features->type == INTUOSPS)) ||
|
|
/* Cintiq doesn't send data when RDY bit isn't set */
|
|
(features->type == CINTIQ && !(data[1] & 0x40)))
|
|
return 1;
|
|
|
|
x = (be16_to_cpup((__be16 *)&data[2]) << 1) | ((data[9] >> 1) & 1);
|
|
y = (be16_to_cpup((__be16 *)&data[4]) << 1) | (data[9] & 1);
|
|
distance = data[9] >> 2;
|
|
if (features->type < INTUOS3S) {
|
|
x >>= 1;
|
|
y >>= 1;
|
|
distance >>= 1;
|
|
}
|
|
input_report_abs(input, ABS_X, x);
|
|
input_report_abs(input, ABS_Y, y);
|
|
input_report_abs(input, ABS_DISTANCE, distance);
|
|
|
|
switch (type) {
|
|
case 0x00:
|
|
case 0x01:
|
|
case 0x02:
|
|
case 0x03:
|
|
/* general pen packet */
|
|
t = (data[6] << 3) | ((data[7] & 0xC0) >> 5) | (data[1] & 1);
|
|
if (features->pressure_max < 2047)
|
|
t >>= 1;
|
|
input_report_abs(input, ABS_PRESSURE, t);
|
|
if (features->type != INTUOSHT2) {
|
|
input_report_abs(input, ABS_TILT_X,
|
|
(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
|
|
input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
|
|
}
|
|
input_report_key(input, BTN_STYLUS, data[1] & 2);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 4);
|
|
input_report_key(input, BTN_TOUCH, t > 10);
|
|
break;
|
|
|
|
case 0x0a:
|
|
/* airbrush second packet */
|
|
input_report_abs(input, ABS_WHEEL,
|
|
(data[6] << 2) | ((data[7] >> 6) & 3));
|
|
input_report_abs(input, ABS_TILT_X,
|
|
(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
|
|
input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
|
|
break;
|
|
|
|
case 0x05:
|
|
/* Rotation packet */
|
|
if (features->type >= INTUOS3S) {
|
|
/* I3 marker pen rotation */
|
|
t = (data[6] << 3) | ((data[7] >> 5) & 7);
|
|
t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
|
|
((t-1) / 2 + 450)) : (450 - t / 2) ;
|
|
input_report_abs(input, ABS_Z, t);
|
|
} else {
|
|
/* 4D mouse 2nd packet */
|
|
t = (data[6] << 3) | ((data[7] >> 5) & 7);
|
|
input_report_abs(input, ABS_RZ, (data[7] & 0x20) ?
|
|
((t - 1) / 2) : -t / 2);
|
|
}
|
|
break;
|
|
|
|
case 0x04:
|
|
/* 4D mouse 1st packet */
|
|
input_report_key(input, BTN_LEFT, data[8] & 0x01);
|
|
input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
|
|
input_report_key(input, BTN_RIGHT, data[8] & 0x04);
|
|
|
|
input_report_key(input, BTN_SIDE, data[8] & 0x20);
|
|
input_report_key(input, BTN_EXTRA, data[8] & 0x10);
|
|
t = (data[6] << 2) | ((data[7] >> 6) & 3);
|
|
input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
|
|
break;
|
|
|
|
case 0x06:
|
|
/* I4 mouse */
|
|
input_report_key(input, BTN_LEFT, data[6] & 0x01);
|
|
input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
|
|
input_report_key(input, BTN_RIGHT, data[6] & 0x04);
|
|
input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7)
|
|
- ((data[7] & 0x40) >> 6));
|
|
input_report_key(input, BTN_SIDE, data[6] & 0x08);
|
|
input_report_key(input, BTN_EXTRA, data[6] & 0x10);
|
|
|
|
input_report_abs(input, ABS_TILT_X,
|
|
(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
|
|
input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
|
|
break;
|
|
|
|
case 0x08:
|
|
if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
|
|
/* 2D mouse packet */
|
|
input_report_key(input, BTN_LEFT, data[8] & 0x04);
|
|
input_report_key(input, BTN_MIDDLE, data[8] & 0x08);
|
|
input_report_key(input, BTN_RIGHT, data[8] & 0x10);
|
|
input_report_rel(input, REL_WHEEL, (data[8] & 0x01)
|
|
- ((data[8] & 0x02) >> 1));
|
|
|
|
/* I3 2D mouse side buttons */
|
|
if (features->type >= INTUOS3S && features->type <= INTUOS3L) {
|
|
input_report_key(input, BTN_SIDE, data[8] & 0x40);
|
|
input_report_key(input, BTN_EXTRA, data[8] & 0x20);
|
|
}
|
|
}
|
|
else if (wacom->tool[idx] == BTN_TOOL_LENS) {
|
|
/* Lens cursor packets */
|
|
input_report_key(input, BTN_LEFT, data[8] & 0x01);
|
|
input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
|
|
input_report_key(input, BTN_RIGHT, data[8] & 0x04);
|
|
input_report_key(input, BTN_SIDE, data[8] & 0x10);
|
|
input_report_key(input, BTN_EXTRA, data[8] & 0x08);
|
|
}
|
|
break;
|
|
|
|
case 0x07:
|
|
case 0x09:
|
|
case 0x0b:
|
|
case 0x0c:
|
|
case 0x0d:
|
|
case 0x0e:
|
|
case 0x0f:
|
|
/* unhandled */
|
|
break;
|
|
}
|
|
|
|
input_report_abs(input, ABS_MISC, wacom->id[idx]); /* report tool id */
|
|
input_report_key(input, wacom->tool[idx], 1);
|
|
input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
|
|
wacom->reporting_data = true;
|
|
return 2;
|
|
}
|
|
|
|
static int wacom_intuos_irq(struct wacom_wac *wacom)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
int result;
|
|
|
|
if (data[0] != WACOM_REPORT_PENABLED &&
|
|
data[0] != WACOM_REPORT_INTUOS_ID1 &&
|
|
data[0] != WACOM_REPORT_INTUOS_ID2 &&
|
|
data[0] != WACOM_REPORT_INTUOSPAD &&
|
|
data[0] != WACOM_REPORT_INTUOS_PEN &&
|
|
data[0] != WACOM_REPORT_CINTIQ &&
|
|
data[0] != WACOM_REPORT_CINTIQPAD &&
|
|
data[0] != WACOM_REPORT_INTUOS5PAD) {
|
|
dev_dbg(input->dev.parent,
|
|
"%s: received unknown report #%d\n", __func__, data[0]);
|
|
return 0;
|
|
}
|
|
|
|
/* process pad events */
|
|
result = wacom_intuos_pad(wacom);
|
|
if (result)
|
|
return result;
|
|
|
|
/* process in/out prox events */
|
|
result = wacom_intuos_inout(wacom);
|
|
if (result)
|
|
return result - 1;
|
|
|
|
/* process general packets */
|
|
result = wacom_intuos_general(wacom);
|
|
if (result)
|
|
return result - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int int_dist(int x1, int y1, int x2, int y2)
|
|
{
|
|
int x = x2 - x1;
|
|
int y = y2 - y1;
|
|
|
|
return int_sqrt(x*x + y*y);
|
|
}
|
|
|
|
static void wacom_intuos_bt_process_data(struct wacom_wac *wacom,
|
|
unsigned char *data)
|
|
{
|
|
memcpy(wacom->data, data, 10);
|
|
wacom_intuos_irq(wacom);
|
|
|
|
input_sync(wacom->pen_input);
|
|
if (wacom->pad_input)
|
|
input_sync(wacom->pad_input);
|
|
}
|
|
|
|
static int wacom_intuos_bt_irq(struct wacom_wac *wacom, size_t len)
|
|
{
|
|
unsigned char data[WACOM_PKGLEN_MAX];
|
|
int i = 1;
|
|
unsigned power_raw, battery_capacity, bat_charging, ps_connected;
|
|
|
|
memcpy(data, wacom->data, len);
|
|
|
|
switch (data[0]) {
|
|
case 0x04:
|
|
wacom_intuos_bt_process_data(wacom, data + i);
|
|
i += 10;
|
|
/* fall through */
|
|
case 0x03:
|
|
wacom_intuos_bt_process_data(wacom, data + i);
|
|
i += 10;
|
|
wacom_intuos_bt_process_data(wacom, data + i);
|
|
i += 10;
|
|
power_raw = data[i];
|
|
bat_charging = (power_raw & 0x08) ? 1 : 0;
|
|
ps_connected = (power_raw & 0x10) ? 1 : 0;
|
|
battery_capacity = batcap_i4[power_raw & 0x07];
|
|
wacom_notify_battery(wacom, battery_capacity, bat_charging,
|
|
battery_capacity || bat_charging,
|
|
ps_connected);
|
|
break;
|
|
default:
|
|
dev_dbg(wacom->pen_input->dev.parent,
|
|
"Unknown report: %d,%d size:%zu\n",
|
|
data[0], data[1], len);
|
|
return 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_wac_finger_count_touches(struct wacom_wac *wacom)
|
|
{
|
|
struct input_dev *input = wacom->touch_input;
|
|
unsigned touch_max = wacom->features.touch_max;
|
|
int count = 0;
|
|
int i;
|
|
|
|
if (!touch_max)
|
|
return 0;
|
|
|
|
if (touch_max == 1)
|
|
return test_bit(BTN_TOUCH, input->key) &&
|
|
!wacom->shared->stylus_in_proximity;
|
|
|
|
for (i = 0; i < input->mt->num_slots; i++) {
|
|
struct input_mt_slot *ps = &input->mt->slots[i];
|
|
int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID);
|
|
if (id >= 0)
|
|
count++;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static int wacom_24hdt_irq(struct wacom_wac *wacom)
|
|
{
|
|
struct input_dev *input = wacom->touch_input;
|
|
unsigned char *data = wacom->data;
|
|
int i;
|
|
int current_num_contacts = data[61];
|
|
int contacts_to_send = 0;
|
|
int num_contacts_left = 4; /* maximum contacts per packet */
|
|
int byte_per_packet = WACOM_BYTES_PER_24HDT_PACKET;
|
|
int y_offset = 2;
|
|
|
|
if (wacom->features.type == WACOM_27QHDT) {
|
|
current_num_contacts = data[63];
|
|
num_contacts_left = 10;
|
|
byte_per_packet = WACOM_BYTES_PER_QHDTHID_PACKET;
|
|
y_offset = 0;
|
|
}
|
|
|
|
/*
|
|
* First packet resets the counter since only the first
|
|
* packet in series will have non-zero current_num_contacts.
|
|
*/
|
|
if (current_num_contacts)
|
|
wacom->num_contacts_left = current_num_contacts;
|
|
|
|
contacts_to_send = min(num_contacts_left, wacom->num_contacts_left);
|
|
|
|
for (i = 0; i < contacts_to_send; i++) {
|
|
int offset = (byte_per_packet * i) + 1;
|
|
bool touch = (data[offset] & 0x1) && !wacom->shared->stylus_in_proximity;
|
|
int slot = input_mt_get_slot_by_key(input, data[offset + 1]);
|
|
|
|
if (slot < 0)
|
|
continue;
|
|
input_mt_slot(input, slot);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
|
|
|
|
if (touch) {
|
|
int t_x = get_unaligned_le16(&data[offset + 2]);
|
|
int t_y = get_unaligned_le16(&data[offset + 4 + y_offset]);
|
|
|
|
input_report_abs(input, ABS_MT_POSITION_X, t_x);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, t_y);
|
|
|
|
if (wacom->features.type != WACOM_27QHDT) {
|
|
int c_x = get_unaligned_le16(&data[offset + 4]);
|
|
int c_y = get_unaligned_le16(&data[offset + 8]);
|
|
int w = get_unaligned_le16(&data[offset + 10]);
|
|
int h = get_unaligned_le16(&data[offset + 12]);
|
|
|
|
input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h));
|
|
input_report_abs(input, ABS_MT_WIDTH_MAJOR,
|
|
min(w, h) + int_dist(t_x, t_y, c_x, c_y));
|
|
input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h));
|
|
input_report_abs(input, ABS_MT_ORIENTATION, w > h);
|
|
}
|
|
}
|
|
}
|
|
input_mt_sync_frame(input);
|
|
|
|
wacom->num_contacts_left -= contacts_to_send;
|
|
if (wacom->num_contacts_left <= 0) {
|
|
wacom->num_contacts_left = 0;
|
|
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_mt_touch(struct wacom_wac *wacom)
|
|
{
|
|
struct input_dev *input = wacom->touch_input;
|
|
unsigned char *data = wacom->data;
|
|
int i;
|
|
int current_num_contacts = data[2];
|
|
int contacts_to_send = 0;
|
|
int x_offset = 0;
|
|
|
|
/* MTTPC does not support Height and Width */
|
|
if (wacom->features.type == MTTPC || wacom->features.type == MTTPC_B)
|
|
x_offset = -4;
|
|
|
|
/*
|
|
* First packet resets the counter since only the first
|
|
* packet in series will have non-zero current_num_contacts.
|
|
*/
|
|
if (current_num_contacts)
|
|
wacom->num_contacts_left = current_num_contacts;
|
|
|
|
/* There are at most 5 contacts per packet */
|
|
contacts_to_send = min(5, wacom->num_contacts_left);
|
|
|
|
for (i = 0; i < contacts_to_send; i++) {
|
|
int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3;
|
|
bool touch = (data[offset] & 0x1) && !wacom->shared->stylus_in_proximity;
|
|
int id = get_unaligned_le16(&data[offset + 1]);
|
|
int slot = input_mt_get_slot_by_key(input, id);
|
|
|
|
if (slot < 0)
|
|
continue;
|
|
|
|
input_mt_slot(input, slot);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
|
|
if (touch) {
|
|
int x = get_unaligned_le16(&data[offset + x_offset + 7]);
|
|
int y = get_unaligned_le16(&data[offset + x_offset + 9]);
|
|
input_report_abs(input, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, y);
|
|
}
|
|
}
|
|
input_mt_sync_frame(input);
|
|
|
|
wacom->num_contacts_left -= contacts_to_send;
|
|
if (wacom->num_contacts_left <= 0) {
|
|
wacom->num_contacts_left = 0;
|
|
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
|
|
{
|
|
struct input_dev *input = wacom->touch_input;
|
|
unsigned char *data = wacom->data;
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
int p = data[1] & (1 << i);
|
|
bool touch = p && !wacom->shared->stylus_in_proximity;
|
|
|
|
input_mt_slot(input, i);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
|
|
if (touch) {
|
|
int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff;
|
|
int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff;
|
|
|
|
input_report_abs(input, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, y);
|
|
}
|
|
}
|
|
input_mt_sync_frame(input);
|
|
|
|
/* keep touch state for pen event */
|
|
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->touch_input;
|
|
bool prox = !wacom->shared->stylus_in_proximity;
|
|
int x = 0, y = 0;
|
|
|
|
if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG)
|
|
return 0;
|
|
|
|
if (len == WACOM_PKGLEN_TPC1FG) {
|
|
prox = prox && (data[0] & 0x01);
|
|
x = get_unaligned_le16(&data[1]);
|
|
y = get_unaligned_le16(&data[3]);
|
|
} else if (len == WACOM_PKGLEN_TPC1FG_B) {
|
|
prox = prox && (data[2] & 0x01);
|
|
x = get_unaligned_le16(&data[3]);
|
|
y = get_unaligned_le16(&data[5]);
|
|
} else {
|
|
prox = prox && (data[1] & 0x01);
|
|
x = le16_to_cpup((__le16 *)&data[2]);
|
|
y = le16_to_cpup((__le16 *)&data[4]);
|
|
}
|
|
|
|
if (prox) {
|
|
input_report_abs(input, ABS_X, x);
|
|
input_report_abs(input, ABS_Y, y);
|
|
}
|
|
input_report_key(input, BTN_TOUCH, prox);
|
|
|
|
/* keep touch state for pen events */
|
|
wacom->shared->touch_down = prox;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_tpc_pen(struct wacom_wac *wacom)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->pen_input;
|
|
bool prox = data[1] & 0x20;
|
|
|
|
if (!wacom->shared->stylus_in_proximity) /* first in prox */
|
|
/* Going into proximity select tool */
|
|
wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
|
|
|
|
/* keep pen state for touch events */
|
|
wacom->shared->stylus_in_proximity = prox;
|
|
|
|
/* send pen events only when touch is up or forced out */
|
|
if (!wacom->shared->touch_down) {
|
|
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
|
|
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
|
|
input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x07) << 8) | data[6]);
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
|
|
input_report_key(input, wacom->tool[0], prox);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
|
|
if (wacom->pen_input)
|
|
dev_dbg(wacom->pen_input->dev.parent,
|
|
"%s: received report #%d\n", __func__, data[0]);
|
|
else if (wacom->touch_input)
|
|
dev_dbg(wacom->touch_input->dev.parent,
|
|
"%s: received report #%d\n", __func__, data[0]);
|
|
|
|
switch (len) {
|
|
case WACOM_PKGLEN_TPC1FG:
|
|
return wacom_tpc_single_touch(wacom, len);
|
|
|
|
case WACOM_PKGLEN_TPC2FG:
|
|
return wacom_tpc_mt_touch(wacom);
|
|
|
|
case WACOM_PKGLEN_PENABLED:
|
|
return wacom_tpc_pen(wacom);
|
|
|
|
default:
|
|
switch (data[0]) {
|
|
case WACOM_REPORT_TPC1FG:
|
|
case WACOM_REPORT_TPCHID:
|
|
case WACOM_REPORT_TPCST:
|
|
case WACOM_REPORT_TPC1FGE:
|
|
return wacom_tpc_single_touch(wacom, len);
|
|
|
|
case WACOM_REPORT_TPCMT:
|
|
case WACOM_REPORT_TPCMT2:
|
|
return wacom_mt_touch(wacom);
|
|
|
|
case WACOM_REPORT_PENABLED:
|
|
return wacom_tpc_pen(wacom);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_map_usage(struct input_dev *input, struct hid_usage *usage,
|
|
struct hid_field *field, __u8 type, __u16 code, int fuzz)
|
|
{
|
|
int fmin = field->logical_minimum;
|
|
int fmax = field->logical_maximum;
|
|
|
|
usage->type = type;
|
|
usage->code = code;
|
|
|
|
set_bit(type, input->evbit);
|
|
|
|
switch (type) {
|
|
case EV_ABS:
|
|
input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
|
|
input_abs_set_res(input, code,
|
|
hidinput_calc_abs_res(field, code));
|
|
break;
|
|
case EV_KEY:
|
|
input_set_capability(input, EV_KEY, code);
|
|
break;
|
|
case EV_MSC:
|
|
input_set_capability(input, EV_MSC, code);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void wacom_wac_pen_usage_mapping(struct hid_device *hdev,
|
|
struct hid_field *field, struct hid_usage *usage)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct input_dev *input = wacom_wac->pen_input;
|
|
|
|
switch (usage->hid) {
|
|
case HID_GD_X:
|
|
wacom_map_usage(input, usage, field, EV_ABS, ABS_X, 4);
|
|
break;
|
|
case HID_GD_Y:
|
|
wacom_map_usage(input, usage, field, EV_ABS, ABS_Y, 4);
|
|
break;
|
|
case HID_DG_TIPPRESSURE:
|
|
wacom_map_usage(input, usage, field, EV_ABS, ABS_PRESSURE, 0);
|
|
break;
|
|
case HID_DG_INRANGE:
|
|
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOOL_PEN, 0);
|
|
break;
|
|
case HID_DG_INVERT:
|
|
wacom_map_usage(input, usage, field, EV_KEY,
|
|
BTN_TOOL_RUBBER, 0);
|
|
break;
|
|
case HID_DG_ERASER:
|
|
case HID_DG_TIPSWITCH:
|
|
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOUCH, 0);
|
|
break;
|
|
case HID_DG_BARRELSWITCH:
|
|
wacom_map_usage(input, usage, field, EV_KEY, BTN_STYLUS, 0);
|
|
break;
|
|
case HID_DG_BARRELSWITCH2:
|
|
wacom_map_usage(input, usage, field, EV_KEY, BTN_STYLUS2, 0);
|
|
break;
|
|
case HID_DG_TOOLSERIALNUMBER:
|
|
wacom_map_usage(input, usage, field, EV_MSC, MSC_SERIAL, 0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int wacom_wac_pen_event(struct hid_device *hdev, struct hid_field *field,
|
|
struct hid_usage *usage, __s32 value)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct input_dev *input = wacom_wac->pen_input;
|
|
|
|
/* checking which Tool / tip switch to send */
|
|
switch (usage->hid) {
|
|
case HID_DG_INRANGE:
|
|
wacom_wac->hid_data.inrange_state = value;
|
|
return 0;
|
|
case HID_DG_INVERT:
|
|
wacom_wac->hid_data.invert_state = value;
|
|
return 0;
|
|
case HID_DG_ERASER:
|
|
case HID_DG_TIPSWITCH:
|
|
wacom_wac->hid_data.tipswitch |= value;
|
|
return 0;
|
|
}
|
|
|
|
/* send pen events only when touch is up or forced out */
|
|
if (!usage->type || wacom_wac->shared->touch_down)
|
|
return 0;
|
|
|
|
input_event(input, usage->type, usage->code, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_wac_pen_pre_report(struct hid_device *hdev,
|
|
struct hid_report *report)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static void wacom_wac_pen_report(struct hid_device *hdev,
|
|
struct hid_report *report)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct input_dev *input = wacom_wac->pen_input;
|
|
bool prox = wacom_wac->hid_data.inrange_state;
|
|
|
|
if (!wacom_wac->shared->stylus_in_proximity) /* first in prox */
|
|
/* Going into proximity select tool */
|
|
wacom_wac->tool[0] = wacom_wac->hid_data.invert_state ?
|
|
BTN_TOOL_RUBBER : BTN_TOOL_PEN;
|
|
|
|
/* keep pen state for touch events */
|
|
wacom_wac->shared->stylus_in_proximity = prox;
|
|
|
|
/* send pen events only when touch is up or forced out */
|
|
if (!wacom_wac->shared->touch_down) {
|
|
input_report_key(input, BTN_TOUCH,
|
|
wacom_wac->hid_data.tipswitch);
|
|
input_report_key(input, wacom_wac->tool[0], prox);
|
|
|
|
wacom_wac->hid_data.tipswitch = false;
|
|
|
|
input_sync(input);
|
|
}
|
|
}
|
|
|
|
static void wacom_wac_finger_usage_mapping(struct hid_device *hdev,
|
|
struct hid_field *field, struct hid_usage *usage)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
struct input_dev *input = wacom_wac->touch_input;
|
|
unsigned touch_max = wacom_wac->features.touch_max;
|
|
|
|
switch (usage->hid) {
|
|
case HID_GD_X:
|
|
features->last_slot_field = usage->hid;
|
|
if (touch_max == 1)
|
|
wacom_map_usage(input, usage, field, EV_ABS, ABS_X, 4);
|
|
else
|
|
wacom_map_usage(input, usage, field, EV_ABS,
|
|
ABS_MT_POSITION_X, 4);
|
|
break;
|
|
case HID_GD_Y:
|
|
features->last_slot_field = usage->hid;
|
|
if (touch_max == 1)
|
|
wacom_map_usage(input, usage, field, EV_ABS, ABS_Y, 4);
|
|
else
|
|
wacom_map_usage(input, usage, field, EV_ABS,
|
|
ABS_MT_POSITION_Y, 4);
|
|
break;
|
|
case HID_DG_WIDTH:
|
|
case HID_DG_HEIGHT:
|
|
features->last_slot_field = usage->hid;
|
|
wacom_map_usage(input, usage, field, EV_ABS, ABS_MT_TOUCH_MAJOR, 0);
|
|
wacom_map_usage(input, usage, field, EV_ABS, ABS_MT_TOUCH_MINOR, 0);
|
|
input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
|
|
break;
|
|
case HID_DG_CONTACTID:
|
|
features->last_slot_field = usage->hid;
|
|
break;
|
|
case HID_DG_INRANGE:
|
|
features->last_slot_field = usage->hid;
|
|
break;
|
|
case HID_DG_INVERT:
|
|
features->last_slot_field = usage->hid;
|
|
break;
|
|
case HID_DG_TIPSWITCH:
|
|
features->last_slot_field = usage->hid;
|
|
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOUCH, 0);
|
|
break;
|
|
case HID_DG_CONTACTCOUNT:
|
|
wacom_wac->hid_data.cc_report = field->report->id;
|
|
wacom_wac->hid_data.cc_index = field->index;
|
|
wacom_wac->hid_data.cc_value_index = usage->usage_index;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
|
|
struct input_dev *input)
|
|
{
|
|
struct hid_data *hid_data = &wacom_wac->hid_data;
|
|
bool mt = wacom_wac->features.touch_max > 1;
|
|
bool prox = hid_data->tipswitch &&
|
|
!wacom_wac->shared->stylus_in_proximity;
|
|
|
|
wacom_wac->hid_data.num_received++;
|
|
if (wacom_wac->hid_data.num_received > wacom_wac->hid_data.num_expected)
|
|
return;
|
|
|
|
if (mt) {
|
|
int slot;
|
|
|
|
slot = input_mt_get_slot_by_key(input, hid_data->id);
|
|
input_mt_slot(input, slot);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, prox);
|
|
}
|
|
else {
|
|
input_report_key(input, BTN_TOUCH, prox);
|
|
}
|
|
|
|
if (prox) {
|
|
input_report_abs(input, mt ? ABS_MT_POSITION_X : ABS_X,
|
|
hid_data->x);
|
|
input_report_abs(input, mt ? ABS_MT_POSITION_Y : ABS_Y,
|
|
hid_data->y);
|
|
|
|
if (test_bit(ABS_MT_TOUCH_MAJOR, input->absbit)) {
|
|
input_report_abs(input, ABS_MT_TOUCH_MAJOR, max(hid_data->width, hid_data->height));
|
|
input_report_abs(input, ABS_MT_TOUCH_MINOR, min(hid_data->width, hid_data->height));
|
|
if (hid_data->width != hid_data->height)
|
|
input_report_abs(input, ABS_MT_ORIENTATION, hid_data->width <= hid_data->height ? 0 : 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int wacom_wac_finger_event(struct hid_device *hdev,
|
|
struct hid_field *field, struct hid_usage *usage, __s32 value)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
|
|
switch (usage->hid) {
|
|
case HID_GD_X:
|
|
wacom_wac->hid_data.x = value;
|
|
break;
|
|
case HID_GD_Y:
|
|
wacom_wac->hid_data.y = value;
|
|
break;
|
|
case HID_DG_WIDTH:
|
|
wacom_wac->hid_data.width = value;
|
|
break;
|
|
case HID_DG_HEIGHT:
|
|
wacom_wac->hid_data.height = value;
|
|
break;
|
|
case HID_DG_CONTACTID:
|
|
wacom_wac->hid_data.id = value;
|
|
break;
|
|
case HID_DG_TIPSWITCH:
|
|
wacom_wac->hid_data.tipswitch = value;
|
|
break;
|
|
}
|
|
|
|
|
|
if (usage->usage_index + 1 == field->report_count) {
|
|
if (usage->hid == wacom_wac->features.last_slot_field)
|
|
wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_wac_finger_pre_report(struct hid_device *hdev,
|
|
struct hid_report *report)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct hid_data* hid_data = &wacom_wac->hid_data;
|
|
|
|
if (hid_data->cc_report != 0 &&
|
|
hid_data->cc_report != report->id) {
|
|
int i;
|
|
|
|
hid_data->cc_report = report->id;
|
|
hid_data->cc_index = -1;
|
|
hid_data->cc_value_index = -1;
|
|
|
|
for (i = 0; i < report->maxfield; i++) {
|
|
struct hid_field *field = report->field[i];
|
|
int j;
|
|
|
|
for (j = 0; j < field->maxusage; j++) {
|
|
if (field->usage[j].hid == HID_DG_CONTACTCOUNT) {
|
|
hid_data->cc_index = i;
|
|
hid_data->cc_value_index = j;
|
|
|
|
/* break */
|
|
i = report->maxfield;
|
|
j = field->maxusage;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if (hid_data->cc_report != 0 &&
|
|
hid_data->cc_index >= 0) {
|
|
struct hid_field *field = report->field[hid_data->cc_index];
|
|
int value = field->value[hid_data->cc_value_index];
|
|
if (value)
|
|
hid_data->num_expected = value;
|
|
}
|
|
else {
|
|
hid_data->num_expected = wacom_wac->features.touch_max;
|
|
}
|
|
}
|
|
|
|
static void wacom_wac_finger_report(struct hid_device *hdev,
|
|
struct hid_report *report)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct input_dev *input = wacom_wac->touch_input;
|
|
unsigned touch_max = wacom_wac->features.touch_max;
|
|
|
|
/* If more packets of data are expected, give us a chance to
|
|
* process them rather than immediately syncing a partial
|
|
* update.
|
|
*/
|
|
if (wacom_wac->hid_data.num_received < wacom_wac->hid_data.num_expected)
|
|
return;
|
|
|
|
if (touch_max > 1)
|
|
input_mt_sync_frame(input);
|
|
|
|
input_sync(input);
|
|
wacom_wac->hid_data.num_received = 0;
|
|
|
|
/* keep touch state for pen event */
|
|
wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(wacom_wac);
|
|
}
|
|
|
|
void wacom_wac_usage_mapping(struct hid_device *hdev,
|
|
struct hid_field *field, struct hid_usage *usage)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
|
|
/* currently, only direct devices have proper hid report descriptors */
|
|
__set_bit(INPUT_PROP_DIRECT, wacom_wac->pen_input->propbit);
|
|
__set_bit(INPUT_PROP_DIRECT, wacom_wac->touch_input->propbit);
|
|
|
|
if (WACOM_PEN_FIELD(field))
|
|
return wacom_wac_pen_usage_mapping(hdev, field, usage);
|
|
|
|
if (WACOM_FINGER_FIELD(field))
|
|
return wacom_wac_finger_usage_mapping(hdev, field, usage);
|
|
}
|
|
|
|
int wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
|
|
struct hid_usage *usage, __s32 value)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
|
|
if (wacom->wacom_wac.features.type != HID_GENERIC)
|
|
return 0;
|
|
|
|
if (WACOM_PEN_FIELD(field))
|
|
return wacom_wac_pen_event(hdev, field, usage, value);
|
|
|
|
if (WACOM_FINGER_FIELD(field))
|
|
return wacom_wac_finger_event(hdev, field, usage, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_report_events(struct hid_device *hdev, struct hid_report *report)
|
|
{
|
|
int r;
|
|
|
|
for (r = 0; r < report->maxfield; r++) {
|
|
struct hid_field *field;
|
|
unsigned count, n;
|
|
|
|
field = report->field[r];
|
|
count = field->report_count;
|
|
|
|
if (!(HID_MAIN_ITEM_VARIABLE & field->flags))
|
|
continue;
|
|
|
|
for (n = 0; n < count; n++)
|
|
wacom_wac_event(hdev, field, &field->usage[n], field->value[n]);
|
|
}
|
|
}
|
|
|
|
void wacom_wac_report(struct hid_device *hdev, struct hid_report *report)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct hid_field *field = report->field[0];
|
|
|
|
if (wacom_wac->features.type != HID_GENERIC)
|
|
return;
|
|
|
|
if (WACOM_PEN_FIELD(field))
|
|
wacom_wac_pen_pre_report(hdev, report);
|
|
|
|
if (WACOM_FINGER_FIELD(field))
|
|
wacom_wac_finger_pre_report(hdev, report);
|
|
|
|
wacom_report_events(hdev, report);
|
|
|
|
if (WACOM_PEN_FIELD(field))
|
|
return wacom_wac_pen_report(hdev, report);
|
|
|
|
if (WACOM_FINGER_FIELD(field))
|
|
return wacom_wac_finger_report(hdev, report);
|
|
}
|
|
|
|
static int wacom_bpt_touch(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
struct input_dev *input = wacom->touch_input;
|
|
struct input_dev *pad_input = wacom->pad_input;
|
|
unsigned char *data = wacom->data;
|
|
int i;
|
|
|
|
if (data[0] != 0x02)
|
|
return 0;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
int offset = (data[1] & 0x80) ? (8 * i) : (9 * i);
|
|
bool touch = data[offset + 3] & 0x80;
|
|
|
|
/*
|
|
* Touch events need to be disabled while stylus is
|
|
* in proximity because user's hand is resting on touchpad
|
|
* and sending unwanted events. User expects tablet buttons
|
|
* to continue working though.
|
|
*/
|
|
touch = touch && !wacom->shared->stylus_in_proximity;
|
|
|
|
input_mt_slot(input, i);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
|
|
if (touch) {
|
|
int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff;
|
|
int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff;
|
|
if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
|
|
x <<= 5;
|
|
y <<= 5;
|
|
}
|
|
input_report_abs(input, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, y);
|
|
}
|
|
}
|
|
|
|
input_mt_sync_frame(input);
|
|
|
|
input_report_key(pad_input, BTN_LEFT, (data[1] & 0x08) != 0);
|
|
input_report_key(pad_input, BTN_FORWARD, (data[1] & 0x04) != 0);
|
|
input_report_key(pad_input, BTN_BACK, (data[1] & 0x02) != 0);
|
|
input_report_key(pad_input, BTN_RIGHT, (data[1] & 0x01) != 0);
|
|
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
struct input_dev *input = wacom->touch_input;
|
|
bool touch = data[1] & 0x80;
|
|
int slot = input_mt_get_slot_by_key(input, data[0]);
|
|
|
|
if (slot < 0)
|
|
return;
|
|
|
|
touch = touch && !wacom->shared->stylus_in_proximity;
|
|
|
|
input_mt_slot(input, slot);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
|
|
|
|
if (touch) {
|
|
int x = (data[2] << 4) | (data[4] >> 4);
|
|
int y = (data[3] << 4) | (data[4] & 0x0f);
|
|
int width, height;
|
|
|
|
if (features->type >= INTUOSPS && features->type <= INTUOSHT2) {
|
|
width = data[5] * 100;
|
|
height = data[6] * 100;
|
|
} else {
|
|
/*
|
|
* "a" is a scaled-down area which we assume is
|
|
* roughly circular and which can be described as:
|
|
* a=(pi*r^2)/C.
|
|
*/
|
|
int a = data[5];
|
|
int x_res = input_abs_get_res(input, ABS_MT_POSITION_X);
|
|
int y_res = input_abs_get_res(input, ABS_MT_POSITION_Y);
|
|
width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
|
|
height = width * y_res / x_res;
|
|
}
|
|
|
|
input_report_abs(input, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, y);
|
|
input_report_abs(input, ABS_MT_TOUCH_MAJOR, width);
|
|
input_report_abs(input, ABS_MT_TOUCH_MINOR, height);
|
|
}
|
|
}
|
|
|
|
static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
|
|
{
|
|
struct input_dev *input = wacom->pad_input;
|
|
struct wacom_features *features = &wacom->features;
|
|
|
|
if (features->type == INTUOSHT || features->type == INTUOSHT2) {
|
|
input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
|
|
input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
|
|
} else {
|
|
input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
|
|
input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
|
|
}
|
|
input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
|
|
input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
|
|
}
|
|
|
|
static int wacom_bpt3_touch(struct wacom_wac *wacom)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
int count = data[1] & 0x07;
|
|
int touch_changed = 0, i;
|
|
|
|
if (data[0] != 0x02)
|
|
return 0;
|
|
|
|
/* data has up to 7 fixed sized 8-byte messages starting at data[2] */
|
|
for (i = 0; i < count; i++) {
|
|
int offset = (8 * i) + 2;
|
|
int msg_id = data[offset];
|
|
|
|
if (msg_id >= 2 && msg_id <= 17) {
|
|
wacom_bpt3_touch_msg(wacom, data + offset);
|
|
touch_changed++;
|
|
} else if (msg_id == 128)
|
|
wacom_bpt3_button_msg(wacom, data + offset);
|
|
|
|
}
|
|
|
|
/* only update touch if we actually have a touchpad and touch data changed */
|
|
if (wacom->touch_registered && touch_changed) {
|
|
input_mt_sync_frame(wacom->touch_input);
|
|
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_bpt_pen(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
struct input_dev *input = wacom->pen_input;
|
|
unsigned char *data = wacom->data;
|
|
int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
|
|
|
|
if (data[0] != WACOM_REPORT_PENABLED)
|
|
return 0;
|
|
|
|
prox = (data[1] & 0x20) == 0x20;
|
|
|
|
/*
|
|
* All reports shared between PEN and RUBBER tool must be
|
|
* forced to a known starting value (zero) when transitioning to
|
|
* out-of-prox.
|
|
*
|
|
* If not reset then, to userspace, it will look like lost events
|
|
* if new tool comes in-prox with same values as previous tool sent.
|
|
*
|
|
* Hardware does report zero in most out-of-prox cases but not all.
|
|
*/
|
|
if (!wacom->shared->stylus_in_proximity) {
|
|
if (data[1] & 0x08) {
|
|
wacom->tool[0] = BTN_TOOL_RUBBER;
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
} else {
|
|
wacom->tool[0] = BTN_TOOL_PEN;
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
}
|
|
}
|
|
|
|
wacom->shared->stylus_in_proximity = prox;
|
|
if (wacom->shared->touch_down)
|
|
return 0;
|
|
|
|
if (prox) {
|
|
x = le16_to_cpup((__le16 *)&data[2]);
|
|
y = le16_to_cpup((__le16 *)&data[4]);
|
|
p = le16_to_cpup((__le16 *)&data[6]);
|
|
/*
|
|
* Convert distance from out prox to distance from tablet.
|
|
* distance will be greater than distance_max once
|
|
* touching and applying pressure; do not report negative
|
|
* distance.
|
|
*/
|
|
if (data[8] <= features->distance_max)
|
|
d = features->distance_max - data[8];
|
|
|
|
pen = data[1] & 0x01;
|
|
btn1 = data[1] & 0x02;
|
|
btn2 = data[1] & 0x04;
|
|
} else {
|
|
wacom->id[0] = 0;
|
|
}
|
|
|
|
input_report_key(input, BTN_TOUCH, pen);
|
|
input_report_key(input, BTN_STYLUS, btn1);
|
|
input_report_key(input, BTN_STYLUS2, btn2);
|
|
|
|
input_report_abs(input, ABS_X, x);
|
|
input_report_abs(input, ABS_Y, y);
|
|
input_report_abs(input, ABS_PRESSURE, p);
|
|
input_report_abs(input, ABS_DISTANCE, d);
|
|
|
|
input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
|
|
if ((features->type == INTUOSHT2) &&
|
|
(features->device_type & WACOM_DEVICETYPE_PEN))
|
|
return wacom_intuos_irq(wacom);
|
|
else if (len == WACOM_PKGLEN_BBTOUCH)
|
|
return wacom_bpt_touch(wacom);
|
|
else if (len == WACOM_PKGLEN_BBTOUCH3)
|
|
return wacom_bpt3_touch(wacom);
|
|
else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN)
|
|
return wacom_bpt_pen(wacom);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_bamboo_pad_pen_event(struct wacom_wac *wacom,
|
|
unsigned char *data)
|
|
{
|
|
unsigned char prefix;
|
|
|
|
/*
|
|
* We need to reroute the event from the debug interface to the
|
|
* pen interface.
|
|
* We need to add the report ID to the actual pen report, so we
|
|
* temporary overwrite the first byte to prevent having to kzalloc/kfree
|
|
* and memcpy the report.
|
|
*/
|
|
prefix = data[0];
|
|
data[0] = WACOM_REPORT_BPAD_PEN;
|
|
|
|
/*
|
|
* actually reroute the event.
|
|
* No need to check if wacom->shared->pen is valid, hid_input_report()
|
|
* will check for us.
|
|
*/
|
|
hid_input_report(wacom->shared->pen, HID_INPUT_REPORT, data,
|
|
WACOM_PKGLEN_PENABLED, 1);
|
|
|
|
data[0] = prefix;
|
|
}
|
|
|
|
static int wacom_bamboo_pad_touch_event(struct wacom_wac *wacom,
|
|
unsigned char *data)
|
|
{
|
|
struct input_dev *input = wacom->touch_input;
|
|
unsigned char *finger_data, prefix;
|
|
unsigned id;
|
|
int x, y;
|
|
bool valid;
|
|
|
|
prefix = data[0];
|
|
|
|
for (id = 0; id < wacom->features.touch_max; id++) {
|
|
valid = !!(prefix & BIT(id)) &&
|
|
!wacom->shared->stylus_in_proximity;
|
|
|
|
input_mt_slot(input, id);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, valid);
|
|
|
|
if (!valid)
|
|
continue;
|
|
|
|
finger_data = data + 1 + id * 3;
|
|
x = finger_data[0] | ((finger_data[1] & 0x0f) << 8);
|
|
y = (finger_data[2] << 4) | (finger_data[1] >> 4);
|
|
|
|
input_report_abs(input, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, y);
|
|
}
|
|
|
|
input_mt_sync_frame(input);
|
|
|
|
input_report_key(input, BTN_LEFT, prefix & 0x40);
|
|
input_report_key(input, BTN_RIGHT, prefix & 0x80);
|
|
|
|
/* keep touch state for pen event */
|
|
wacom->shared->touch_down = !!prefix &&
|
|
!wacom->shared->stylus_in_proximity;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_bamboo_pad_irq(struct wacom_wac *wacom, size_t len)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
|
|
if (!((len == WACOM_PKGLEN_BPAD_TOUCH) ||
|
|
(len == WACOM_PKGLEN_BPAD_TOUCH_USB)) ||
|
|
(data[0] != WACOM_REPORT_BPAD_TOUCH))
|
|
return 0;
|
|
|
|
if (data[1] & 0x01)
|
|
wacom_bamboo_pad_pen_event(wacom, &data[1]);
|
|
|
|
if (data[1] & 0x02)
|
|
return wacom_bamboo_pad_touch_event(wacom, &data[9]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
|
|
{
|
|
struct wacom *w = container_of(wacom, struct wacom, wacom_wac);
|
|
unsigned char *data = wacom->data;
|
|
int connected;
|
|
|
|
if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL)
|
|
return 0;
|
|
|
|
connected = data[1] & 0x01;
|
|
if (connected) {
|
|
int pid, battery, charging;
|
|
|
|
if ((wacom->shared->type == INTUOSHT ||
|
|
wacom->shared->type == INTUOSHT2) &&
|
|
wacom->shared->touch_input &&
|
|
wacom->shared->touch_max) {
|
|
input_report_switch(wacom->shared->touch_input,
|
|
SW_MUTE_DEVICE, data[5] & 0x40);
|
|
input_sync(wacom->shared->touch_input);
|
|
}
|
|
|
|
pid = get_unaligned_be16(&data[6]);
|
|
battery = (data[5] & 0x3f) * 100 / 31;
|
|
charging = !!(data[5] & 0x80);
|
|
if (wacom->pid != pid) {
|
|
wacom->pid = pid;
|
|
wacom_schedule_work(wacom);
|
|
}
|
|
|
|
if (w->battery)
|
|
wacom_notify_battery(wacom, battery, charging, 1, 0);
|
|
|
|
} else if (wacom->pid != 0) {
|
|
/* disconnected while previously connected */
|
|
wacom->pid = 0;
|
|
wacom_schedule_work(wacom);
|
|
wacom_notify_battery(wacom, 0, 0, 0, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_status_irq(struct wacom_wac *wacom_wac, size_t len)
|
|
{
|
|
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
unsigned char *data = wacom_wac->data;
|
|
|
|
if (data[0] != WACOM_REPORT_USB)
|
|
return 0;
|
|
|
|
if ((features->type == INTUOSHT ||
|
|
features->type == INTUOSHT2) &&
|
|
wacom_wac->shared->touch_input &&
|
|
features->touch_max) {
|
|
input_report_switch(wacom_wac->shared->touch_input,
|
|
SW_MUTE_DEVICE, data[8] & 0x40);
|
|
input_sync(wacom_wac->shared->touch_input);
|
|
}
|
|
|
|
if (data[9] & 0x02) { /* wireless module is attached */
|
|
int battery = (data[8] & 0x3f) * 100 / 31;
|
|
bool charging = !!(data[8] & 0x80);
|
|
|
|
wacom_notify_battery(wacom_wac, battery, charging,
|
|
battery || charging, 1);
|
|
|
|
if (!wacom->battery &&
|
|
!(features->quirks & WACOM_QUIRK_BATTERY)) {
|
|
features->quirks |= WACOM_QUIRK_BATTERY;
|
|
INIT_WORK(&wacom->work, wacom_battery_work);
|
|
wacom_schedule_work(wacom_wac);
|
|
}
|
|
}
|
|
else if ((features->quirks & WACOM_QUIRK_BATTERY) &&
|
|
wacom->battery) {
|
|
features->quirks &= ~WACOM_QUIRK_BATTERY;
|
|
INIT_WORK(&wacom->work, wacom_battery_work);
|
|
wacom_schedule_work(wacom_wac);
|
|
wacom_notify_battery(wacom_wac, 0, 0, 0, 0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
|
|
{
|
|
bool sync;
|
|
|
|
switch (wacom_wac->features.type) {
|
|
case PENPARTNER:
|
|
sync = wacom_penpartner_irq(wacom_wac);
|
|
break;
|
|
|
|
case PL:
|
|
sync = wacom_pl_irq(wacom_wac);
|
|
break;
|
|
|
|
case WACOM_G4:
|
|
case GRAPHIRE:
|
|
case GRAPHIRE_BT:
|
|
case WACOM_MO:
|
|
sync = wacom_graphire_irq(wacom_wac);
|
|
break;
|
|
|
|
case PTU:
|
|
sync = wacom_ptu_irq(wacom_wac);
|
|
break;
|
|
|
|
case DTU:
|
|
sync = wacom_dtu_irq(wacom_wac);
|
|
break;
|
|
|
|
case DTUS:
|
|
case DTUSX:
|
|
sync = wacom_dtus_irq(wacom_wac);
|
|
break;
|
|
|
|
case INTUOS:
|
|
case INTUOS3S:
|
|
case INTUOS3:
|
|
case INTUOS3L:
|
|
case INTUOS4S:
|
|
case INTUOS4:
|
|
case INTUOS4L:
|
|
case CINTIQ:
|
|
case WACOM_BEE:
|
|
case WACOM_13HD:
|
|
case WACOM_21UX2:
|
|
case WACOM_22HD:
|
|
case WACOM_24HD:
|
|
case WACOM_27QHD:
|
|
case DTK:
|
|
case CINTIQ_HYBRID:
|
|
case CINTIQ_COMPANION_2:
|
|
sync = wacom_intuos_irq(wacom_wac);
|
|
break;
|
|
|
|
case INTUOS4WL:
|
|
sync = wacom_intuos_bt_irq(wacom_wac, len);
|
|
break;
|
|
|
|
case WACOM_24HDT:
|
|
case WACOM_27QHDT:
|
|
sync = wacom_24hdt_irq(wacom_wac);
|
|
break;
|
|
|
|
case INTUOS5S:
|
|
case INTUOS5:
|
|
case INTUOS5L:
|
|
case INTUOSPS:
|
|
case INTUOSPM:
|
|
case INTUOSPL:
|
|
if (len == WACOM_PKGLEN_BBTOUCH3)
|
|
sync = wacom_bpt3_touch(wacom_wac);
|
|
else if (wacom_wac->data[0] == WACOM_REPORT_USB)
|
|
sync = wacom_status_irq(wacom_wac, len);
|
|
else
|
|
sync = wacom_intuos_irq(wacom_wac);
|
|
break;
|
|
|
|
case TABLETPC:
|
|
case TABLETPCE:
|
|
case TABLETPC2FG:
|
|
case MTSCREEN:
|
|
case MTTPC:
|
|
case MTTPC_B:
|
|
sync = wacom_tpc_irq(wacom_wac, len);
|
|
break;
|
|
|
|
case BAMBOO_PT:
|
|
case BAMBOO_PEN:
|
|
case BAMBOO_TOUCH:
|
|
case INTUOSHT:
|
|
case INTUOSHT2:
|
|
if (wacom_wac->data[0] == WACOM_REPORT_USB)
|
|
sync = wacom_status_irq(wacom_wac, len);
|
|
else
|
|
sync = wacom_bpt_irq(wacom_wac, len);
|
|
break;
|
|
|
|
case BAMBOO_PAD:
|
|
sync = wacom_bamboo_pad_irq(wacom_wac, len);
|
|
break;
|
|
|
|
case WIRELESS:
|
|
sync = wacom_wireless_irq(wacom_wac, len);
|
|
break;
|
|
|
|
case REMOTE:
|
|
if (wacom_wac->data[0] == WACOM_REPORT_DEVICE_LIST)
|
|
sync = wacom_remote_status_irq(wacom_wac, len);
|
|
else
|
|
sync = wacom_remote_irq(wacom_wac, len);
|
|
break;
|
|
|
|
default:
|
|
sync = false;
|
|
break;
|
|
}
|
|
|
|
if (sync) {
|
|
if (wacom_wac->pen_input)
|
|
input_sync(wacom_wac->pen_input);
|
|
if (wacom_wac->touch_input)
|
|
input_sync(wacom_wac->touch_input);
|
|
if (wacom_wac->pad_input)
|
|
input_sync(wacom_wac->pad_input);
|
|
}
|
|
}
|
|
|
|
static void wacom_setup_basic_pro_pen(struct wacom_wac *wacom_wac)
|
|
{
|
|
struct input_dev *input_dev = wacom_wac->pen_input;
|
|
|
|
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
|
|
|
|
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS2, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_DISTANCE,
|
|
0, wacom_wac->features.distance_max, wacom_wac->features.distance_fuzz, 0);
|
|
}
|
|
|
|
static void wacom_setup_cintiq(struct wacom_wac *wacom_wac)
|
|
{
|
|
struct input_dev *input_dev = wacom_wac->pen_input;
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
|
|
wacom_setup_basic_pro_pen(wacom_wac);
|
|
|
|
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_BRUSH, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_PENCIL, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_TILT_X, -64, 63, features->tilt_fuzz, 0);
|
|
input_abs_set_res(input_dev, ABS_TILT_X, 57);
|
|
input_set_abs_params(input_dev, ABS_TILT_Y, -64, 63, features->tilt_fuzz, 0);
|
|
input_abs_set_res(input_dev, ABS_TILT_Y, 57);
|
|
}
|
|
|
|
static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
|
|
{
|
|
struct input_dev *input_dev = wacom_wac->pen_input;
|
|
|
|
input_set_capability(input_dev, EV_REL, REL_WHEEL);
|
|
|
|
wacom_setup_cintiq(wacom_wac);
|
|
|
|
__set_bit(BTN_LEFT, input_dev->keybit);
|
|
__set_bit(BTN_RIGHT, input_dev->keybit);
|
|
__set_bit(BTN_MIDDLE, input_dev->keybit);
|
|
__set_bit(BTN_SIDE, input_dev->keybit);
|
|
__set_bit(BTN_EXTRA, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_LENS, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
|
|
input_abs_set_res(input_dev, ABS_RZ, 287);
|
|
input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
|
|
}
|
|
|
|
void wacom_setup_device_quirks(struct wacom *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->wacom_wac.features;
|
|
|
|
/* The pen and pad share the same interface on most devices */
|
|
if (features->type == GRAPHIRE_BT || features->type == WACOM_G4 ||
|
|
features->type == DTUS ||
|
|
(features->type >= INTUOS3S && features->type <= WACOM_MO)) {
|
|
if (features->device_type & WACOM_DEVICETYPE_PEN)
|
|
features->device_type |= WACOM_DEVICETYPE_PAD;
|
|
}
|
|
|
|
/* touch device found but size is not defined. use default */
|
|
if (features->device_type & WACOM_DEVICETYPE_TOUCH && !features->x_max) {
|
|
features->x_max = 1023;
|
|
features->y_max = 1023;
|
|
}
|
|
|
|
/*
|
|
* Intuos5/Pro and Bamboo 3rd gen have no useful data about its
|
|
* touch interface in its HID descriptor. If this is the touch
|
|
* interface (PacketSize of WACOM_PKGLEN_BBTOUCH3), override the
|
|
* tablet values.
|
|
*/
|
|
if ((features->type >= INTUOS5S && features->type <= INTUOSPL) ||
|
|
(features->type >= INTUOSHT && features->type <= BAMBOO_PT)) {
|
|
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
|
|
if (features->touch_max)
|
|
features->device_type |= WACOM_DEVICETYPE_TOUCH;
|
|
if (features->type >= INTUOSHT && features->type <= BAMBOO_PT)
|
|
features->device_type |= WACOM_DEVICETYPE_PAD;
|
|
|
|
features->x_max = 4096;
|
|
features->y_max = 4096;
|
|
}
|
|
else if (features->pktlen == WACOM_PKGLEN_BBTOUCH) {
|
|
features->device_type |= WACOM_DEVICETYPE_PAD;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Hack for the Bamboo One:
|
|
* the device presents a PAD/Touch interface as most Bamboos and even
|
|
* sends ghosts PAD data on it. However, later, we must disable this
|
|
* ghost interface, and we can not detect it unless we set it here
|
|
* to WACOM_DEVICETYPE_PAD or WACOM_DEVICETYPE_TOUCH.
|
|
*/
|
|
if (features->type == BAMBOO_PEN &&
|
|
features->pktlen == WACOM_PKGLEN_BBTOUCH3)
|
|
features->device_type |= WACOM_DEVICETYPE_PAD;
|
|
|
|
/*
|
|
* Raw Wacom-mode pen and touch events both come from interface
|
|
* 0, whose HID descriptor has an application usage of 0xFF0D
|
|
* (i.e., WACOM_VENDORDEFINED_PEN). We route pen packets back
|
|
* out through the HID_GENERIC device created for interface 1,
|
|
* so rewrite this one to be of type WACOM_DEVICETYPE_TOUCH.
|
|
*/
|
|
if (features->type == BAMBOO_PAD)
|
|
features->device_type = WACOM_DEVICETYPE_TOUCH;
|
|
|
|
if (features->type == REMOTE)
|
|
features->device_type = WACOM_DEVICETYPE_PAD;
|
|
|
|
if (wacom->hdev->bus == BUS_BLUETOOTH)
|
|
features->quirks |= WACOM_QUIRK_BATTERY;
|
|
|
|
/* quirk for bamboo touch with 2 low res touches */
|
|
if ((features->type == BAMBOO_PT || features->type == BAMBOO_TOUCH) &&
|
|
features->pktlen == WACOM_PKGLEN_BBTOUCH) {
|
|
features->x_max <<= 5;
|
|
features->y_max <<= 5;
|
|
features->x_fuzz <<= 5;
|
|
features->y_fuzz <<= 5;
|
|
features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES;
|
|
}
|
|
|
|
if (features->type == WIRELESS) {
|
|
if (features->device_type == WACOM_DEVICETYPE_WL_MONITOR) {
|
|
features->quirks |= WACOM_QUIRK_BATTERY;
|
|
}
|
|
}
|
|
}
|
|
|
|
int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
|
|
struct wacom_wac *wacom_wac)
|
|
{
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
|
|
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
|
|
if (!(features->device_type & WACOM_DEVICETYPE_PEN))
|
|
return -ENODEV;
|
|
|
|
if (features->type == HID_GENERIC)
|
|
/* setup has already been done */
|
|
return 0;
|
|
|
|
__set_bit(BTN_TOUCH, input_dev->keybit);
|
|
__set_bit(ABS_MISC, input_dev->absbit);
|
|
|
|
input_set_abs_params(input_dev, ABS_X, features->x_min,
|
|
features->x_max, features->x_fuzz, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, features->y_min,
|
|
features->y_max, features->y_fuzz, 0);
|
|
input_set_abs_params(input_dev, ABS_PRESSURE, 0,
|
|
features->pressure_max, features->pressure_fuzz, 0);
|
|
|
|
/* penabled devices have fixed resolution for each model */
|
|
input_abs_set_res(input_dev, ABS_X, features->x_resolution);
|
|
input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
|
|
|
|
|
|
switch (features->type) {
|
|
case GRAPHIRE_BT:
|
|
__clear_bit(ABS_MISC, input_dev->absbit);
|
|
|
|
case WACOM_MO:
|
|
case WACOM_G4:
|
|
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
|
|
features->distance_max,
|
|
features->distance_fuzz, 0);
|
|
/* fall through */
|
|
|
|
case GRAPHIRE:
|
|
input_set_capability(input_dev, EV_REL, REL_WHEEL);
|
|
|
|
__set_bit(BTN_LEFT, input_dev->keybit);
|
|
__set_bit(BTN_RIGHT, input_dev->keybit);
|
|
__set_bit(BTN_MIDDLE, input_dev->keybit);
|
|
|
|
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS2, input_dev->keybit);
|
|
|
|
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
|
|
break;
|
|
|
|
case WACOM_27QHD:
|
|
case WACOM_24HD:
|
|
case DTK:
|
|
case WACOM_22HD:
|
|
case WACOM_21UX2:
|
|
case WACOM_BEE:
|
|
case CINTIQ:
|
|
case WACOM_13HD:
|
|
case CINTIQ_HYBRID:
|
|
case CINTIQ_COMPANION_2:
|
|
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
|
|
input_abs_set_res(input_dev, ABS_Z, 287);
|
|
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
|
|
wacom_setup_cintiq(wacom_wac);
|
|
break;
|
|
|
|
case INTUOS3:
|
|
case INTUOS3L:
|
|
case INTUOS3S:
|
|
case INTUOS4:
|
|
case INTUOS4WL:
|
|
case INTUOS4L:
|
|
case INTUOS4S:
|
|
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
|
|
input_abs_set_res(input_dev, ABS_Z, 287);
|
|
/* fall through */
|
|
|
|
case INTUOS:
|
|
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
|
|
|
|
wacom_setup_intuos(wacom_wac);
|
|
break;
|
|
|
|
case INTUOS5:
|
|
case INTUOS5L:
|
|
case INTUOSPM:
|
|
case INTUOSPL:
|
|
case INTUOS5S:
|
|
case INTUOSPS:
|
|
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
|
|
|
|
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
|
|
features->distance_max,
|
|
features->distance_fuzz, 0);
|
|
|
|
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
|
|
input_abs_set_res(input_dev, ABS_Z, 287);
|
|
|
|
wacom_setup_intuos(wacom_wac);
|
|
break;
|
|
|
|
case WACOM_24HDT:
|
|
case WACOM_27QHDT:
|
|
case MTSCREEN:
|
|
case MTTPC:
|
|
case MTTPC_B:
|
|
case TABLETPC2FG:
|
|
case TABLETPC:
|
|
case TABLETPCE:
|
|
__clear_bit(ABS_MISC, input_dev->absbit);
|
|
/* fall through */
|
|
|
|
case DTUS:
|
|
case DTUSX:
|
|
case PL:
|
|
case DTU:
|
|
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS2, input_dev->keybit);
|
|
|
|
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
|
|
break;
|
|
|
|
case PTU:
|
|
__set_bit(BTN_STYLUS2, input_dev->keybit);
|
|
/* fall through */
|
|
|
|
case PENPARTNER:
|
|
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
|
|
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
|
|
break;
|
|
|
|
case INTUOSHT:
|
|
case BAMBOO_PT:
|
|
case BAMBOO_PEN:
|
|
case INTUOSHT2:
|
|
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
|
|
|
|
if (features->type == INTUOSHT2) {
|
|
wacom_setup_basic_pro_pen(wacom_wac);
|
|
} else {
|
|
__clear_bit(ABS_MISC, input_dev->absbit);
|
|
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS2, input_dev->keybit);
|
|
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
|
|
features->distance_max,
|
|
features->distance_fuzz, 0);
|
|
}
|
|
break;
|
|
case BAMBOO_PAD:
|
|
__clear_bit(ABS_MISC, input_dev->absbit);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
|
|
struct wacom_wac *wacom_wac)
|
|
{
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
|
|
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
|
|
if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
|
|
return -ENODEV;
|
|
|
|
if (features->type == HID_GENERIC)
|
|
/* setup has already been done */
|
|
return 0;
|
|
|
|
__set_bit(BTN_TOUCH, input_dev->keybit);
|
|
|
|
if (features->touch_max == 1) {
|
|
input_set_abs_params(input_dev, ABS_X, 0,
|
|
features->x_max, features->x_fuzz, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0,
|
|
features->y_max, features->y_fuzz, 0);
|
|
input_abs_set_res(input_dev, ABS_X,
|
|
features->x_resolution);
|
|
input_abs_set_res(input_dev, ABS_Y,
|
|
features->y_resolution);
|
|
}
|
|
else if (features->touch_max > 1) {
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
|
|
features->x_max, features->x_fuzz, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
|
|
features->y_max, features->y_fuzz, 0);
|
|
input_abs_set_res(input_dev, ABS_MT_POSITION_X,
|
|
features->x_resolution);
|
|
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
|
|
features->y_resolution);
|
|
}
|
|
|
|
switch (features->type) {
|
|
case INTUOS5:
|
|
case INTUOS5L:
|
|
case INTUOSPM:
|
|
case INTUOSPL:
|
|
case INTUOS5S:
|
|
case INTUOSPS:
|
|
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
|
|
|
|
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, features->y_max, 0, 0);
|
|
input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
|
|
break;
|
|
|
|
case WACOM_24HDT:
|
|
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
|
|
/* fall through */
|
|
|
|
case WACOM_27QHDT:
|
|
case MTSCREEN:
|
|
case MTTPC:
|
|
case MTTPC_B:
|
|
case TABLETPC2FG:
|
|
input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_DIRECT);
|
|
/*fall through */
|
|
|
|
case TABLETPC:
|
|
case TABLETPCE:
|
|
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
|
|
break;
|
|
|
|
case INTUOSHT:
|
|
case INTUOSHT2:
|
|
input_dev->evbit[0] |= BIT_MASK(EV_SW);
|
|
__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
|
|
/* fall through */
|
|
|
|
case BAMBOO_PT:
|
|
case BAMBOO_TOUCH:
|
|
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
|
|
input_set_abs_params(input_dev,
|
|
ABS_MT_TOUCH_MAJOR,
|
|
0, features->x_max, 0, 0);
|
|
input_set_abs_params(input_dev,
|
|
ABS_MT_TOUCH_MINOR,
|
|
0, features->y_max, 0, 0);
|
|
}
|
|
input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
|
|
break;
|
|
|
|
case BAMBOO_PAD:
|
|
input_mt_init_slots(input_dev, features->touch_max,
|
|
INPUT_MT_POINTER);
|
|
__set_bit(BTN_LEFT, input_dev->keybit);
|
|
__set_bit(BTN_RIGHT, input_dev->keybit);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_setup_numbered_buttons(struct input_dev *input_dev,
|
|
int button_count)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < button_count && i < 10; i++)
|
|
__set_bit(BTN_0 + i, input_dev->keybit);
|
|
for (i = 10; i < button_count && i < 16; i++)
|
|
__set_bit(BTN_A + (i-10), input_dev->keybit);
|
|
for (i = 16; i < button_count && i < 18; i++)
|
|
__set_bit(BTN_BASE + (i-16), input_dev->keybit);
|
|
}
|
|
|
|
static void wacom_report_numbered_buttons(struct input_dev *input_dev,
|
|
int button_count, int mask)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < button_count && i < 10; i++)
|
|
input_report_key(input_dev, BTN_0 + i, mask & (1 << i));
|
|
for (i = 10; i < button_count && i < 16; i++)
|
|
input_report_key(input_dev, BTN_A + (i-10), mask & (1 << i));
|
|
for (i = 16; i < button_count && i < 18; i++)
|
|
input_report_key(input_dev, BTN_BASE + (i-16), mask & (1 << i));
|
|
}
|
|
|
|
int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
|
|
struct wacom_wac *wacom_wac)
|
|
{
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
|
|
if (!(features->device_type & WACOM_DEVICETYPE_PAD))
|
|
return -ENODEV;
|
|
|
|
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
|
|
/* kept for making legacy xf86-input-wacom working with the wheels */
|
|
__set_bit(ABS_MISC, input_dev->absbit);
|
|
|
|
/* kept for making legacy xf86-input-wacom accepting the pad */
|
|
input_set_abs_params(input_dev, ABS_X, 0, 1, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0);
|
|
|
|
/* kept for making udev and libwacom accepting the pad */
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
|
|
wacom_setup_numbered_buttons(input_dev, features->numbered_buttons);
|
|
|
|
switch (features->type) {
|
|
|
|
case CINTIQ_HYBRID:
|
|
case CINTIQ_COMPANION_2:
|
|
case DTK:
|
|
case DTUS:
|
|
case GRAPHIRE_BT:
|
|
break;
|
|
|
|
case WACOM_MO:
|
|
__set_bit(BTN_BACK, input_dev->keybit);
|
|
__set_bit(BTN_LEFT, input_dev->keybit);
|
|
__set_bit(BTN_FORWARD, input_dev->keybit);
|
|
__set_bit(BTN_RIGHT, input_dev->keybit);
|
|
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
|
|
break;
|
|
|
|
case WACOM_G4:
|
|
__set_bit(BTN_BACK, input_dev->keybit);
|
|
__set_bit(BTN_FORWARD, input_dev->keybit);
|
|
input_set_capability(input_dev, EV_REL, REL_WHEEL);
|
|
break;
|
|
|
|
case WACOM_24HD:
|
|
__set_bit(KEY_PROG1, input_dev->keybit);
|
|
__set_bit(KEY_PROG2, input_dev->keybit);
|
|
__set_bit(KEY_PROG3, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
|
|
break;
|
|
|
|
case WACOM_27QHD:
|
|
__set_bit(KEY_PROG1, input_dev->keybit);
|
|
__set_bit(KEY_PROG2, input_dev->keybit);
|
|
__set_bit(KEY_PROG3, input_dev->keybit);
|
|
input_set_abs_params(input_dev, ABS_X, -2048, 2048, 0, 0);
|
|
input_abs_set_res(input_dev, ABS_X, 1024); /* points/g */
|
|
input_set_abs_params(input_dev, ABS_Y, -2048, 2048, 0, 0);
|
|
input_abs_set_res(input_dev, ABS_Y, 1024);
|
|
input_set_abs_params(input_dev, ABS_Z, -2048, 2048, 0, 0);
|
|
input_abs_set_res(input_dev, ABS_Z, 1024);
|
|
__set_bit(INPUT_PROP_ACCELEROMETER, input_dev->propbit);
|
|
break;
|
|
|
|
case WACOM_22HD:
|
|
__set_bit(KEY_PROG1, input_dev->keybit);
|
|
__set_bit(KEY_PROG2, input_dev->keybit);
|
|
__set_bit(KEY_PROG3, input_dev->keybit);
|
|
/* fall through */
|
|
|
|
case WACOM_21UX2:
|
|
case WACOM_BEE:
|
|
case CINTIQ:
|
|
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
|
|
break;
|
|
|
|
case WACOM_13HD:
|
|
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
|
|
break;
|
|
|
|
case INTUOS3:
|
|
case INTUOS3L:
|
|
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
|
|
/* fall through */
|
|
|
|
case INTUOS3S:
|
|
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
|
|
break;
|
|
|
|
case INTUOS5:
|
|
case INTUOS5L:
|
|
case INTUOSPM:
|
|
case INTUOSPL:
|
|
case INTUOS5S:
|
|
case INTUOSPS:
|
|
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
|
|
break;
|
|
|
|
case INTUOS4WL:
|
|
/*
|
|
* For Bluetooth devices, the udev rule does not work correctly
|
|
* for pads unless we add a stylus capability, which forces
|
|
* ID_INPUT_TABLET to be set.
|
|
*/
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
/* fall through */
|
|
|
|
case INTUOS4:
|
|
case INTUOS4L:
|
|
case INTUOS4S:
|
|
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
|
|
break;
|
|
|
|
case INTUOSHT:
|
|
case BAMBOO_PT:
|
|
case BAMBOO_TOUCH:
|
|
case INTUOSHT2:
|
|
__clear_bit(ABS_MISC, input_dev->absbit);
|
|
|
|
__set_bit(BTN_LEFT, input_dev->keybit);
|
|
__set_bit(BTN_FORWARD, input_dev->keybit);
|
|
__set_bit(BTN_BACK, input_dev->keybit);
|
|
__set_bit(BTN_RIGHT, input_dev->keybit);
|
|
|
|
break;
|
|
|
|
case REMOTE:
|
|
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
|
|
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
|
|
break;
|
|
|
|
default:
|
|
/* no pad supported */
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct wacom_features wacom_features_0x00 =
|
|
{ "Wacom Penpartner", 5040, 3780, 255, 0,
|
|
PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
|
|
static const struct wacom_features wacom_features_0x10 =
|
|
{ "Wacom Graphire", 10206, 7422, 511, 63,
|
|
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
|
|
static const struct wacom_features wacom_features_0x81 =
|
|
{ "Wacom Graphire BT", 16704, 12064, 511, 32,
|
|
GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES, 2 };
|
|
static const struct wacom_features wacom_features_0x11 =
|
|
{ "Wacom Graphire2 4x5", 10206, 7422, 511, 63,
|
|
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
|
|
static const struct wacom_features wacom_features_0x12 =
|
|
{ "Wacom Graphire2 5x7", 13918, 10206, 511, 63,
|
|
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
|
|
static const struct wacom_features wacom_features_0x13 =
|
|
{ "Wacom Graphire3", 10208, 7424, 511, 63,
|
|
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
|
|
static const struct wacom_features wacom_features_0x14 =
|
|
{ "Wacom Graphire3 6x8", 16704, 12064, 511, 63,
|
|
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
|
|
static const struct wacom_features wacom_features_0x15 =
|
|
{ "Wacom Graphire4 4x5", 10208, 7424, 511, 63,
|
|
WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
|
|
static const struct wacom_features wacom_features_0x16 =
|
|
{ "Wacom Graphire4 6x8", 16704, 12064, 511, 63,
|
|
WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
|
|
static const struct wacom_features wacom_features_0x17 =
|
|
{ "Wacom BambooFun 4x5", 14760, 9225, 511, 63,
|
|
WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x18 =
|
|
{ "Wacom BambooFun 6x8", 21648, 13530, 511, 63,
|
|
WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x19 =
|
|
{ "Wacom Bamboo1 Medium", 16704, 12064, 511, 63,
|
|
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
|
|
static const struct wacom_features wacom_features_0x60 =
|
|
{ "Wacom Volito", 5104, 3712, 511, 63,
|
|
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
|
|
static const struct wacom_features wacom_features_0x61 =
|
|
{ "Wacom PenStation2", 3250, 2320, 255, 63,
|
|
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
|
|
static const struct wacom_features wacom_features_0x62 =
|
|
{ "Wacom Volito2 4x5", 5104, 3712, 511, 63,
|
|
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
|
|
static const struct wacom_features wacom_features_0x63 =
|
|
{ "Wacom Volito2 2x3", 3248, 2320, 511, 63,
|
|
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
|
|
static const struct wacom_features wacom_features_0x64 =
|
|
{ "Wacom PenPartner2", 3250, 2320, 511, 63,
|
|
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
|
|
static const struct wacom_features wacom_features_0x65 =
|
|
{ "Wacom Bamboo", 14760, 9225, 511, 63,
|
|
WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x69 =
|
|
{ "Wacom Bamboo1", 5104, 3712, 511, 63,
|
|
GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
|
|
static const struct wacom_features wacom_features_0x6A =
|
|
{ "Wacom Bamboo1 4x6", 14760, 9225, 1023, 63,
|
|
GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x6B =
|
|
{ "Wacom Bamboo1 5x8", 21648, 13530, 1023, 63,
|
|
GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x20 =
|
|
{ "Wacom Intuos 4x5", 12700, 10600, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x21 =
|
|
{ "Wacom Intuos 6x8", 20320, 16240, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x22 =
|
|
{ "Wacom Intuos 9x12", 30480, 24060, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x23 =
|
|
{ "Wacom Intuos 12x12", 30480, 31680, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x24 =
|
|
{ "Wacom Intuos 12x18", 45720, 31680, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x30 =
|
|
{ "Wacom PL400", 5408, 4056, 255, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x31 =
|
|
{ "Wacom PL500", 6144, 4608, 255, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x32 =
|
|
{ "Wacom PL600", 6126, 4604, 255, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x33 =
|
|
{ "Wacom PL600SX", 6260, 5016, 255, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x34 =
|
|
{ "Wacom PL550", 6144, 4608, 511, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x35 =
|
|
{ "Wacom PL800", 7220, 5780, 511, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x37 =
|
|
{ "Wacom PL700", 6758, 5406, 511, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x38 =
|
|
{ "Wacom PL510", 6282, 4762, 511, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x39 =
|
|
{ "Wacom DTU710", 34080, 27660, 511, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0xC4 =
|
|
{ "Wacom DTF521", 6282, 4762, 511, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0xC0 =
|
|
{ "Wacom DTF720", 6858, 5506, 511, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0xC2 =
|
|
{ "Wacom DTF720a", 6858, 5506, 511, 0,
|
|
PL, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x03 =
|
|
{ "Wacom Cintiq Partner", 20480, 15360, 511, 0,
|
|
PTU, WACOM_PL_RES, WACOM_PL_RES };
|
|
static const struct wacom_features wacom_features_0x41 =
|
|
{ "Wacom Intuos2 4x5", 12700, 10600, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x42 =
|
|
{ "Wacom Intuos2 6x8", 20320, 16240, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x43 =
|
|
{ "Wacom Intuos2 9x12", 30480, 24060, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x44 =
|
|
{ "Wacom Intuos2 12x12", 30480, 31680, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x45 =
|
|
{ "Wacom Intuos2 12x18", 45720, 31680, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xB0 =
|
|
{ "Wacom Intuos3 4x5", 25400, 20320, 1023, 63,
|
|
INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 4 };
|
|
static const struct wacom_features wacom_features_0xB1 =
|
|
{ "Wacom Intuos3 6x8", 40640, 30480, 1023, 63,
|
|
INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
|
|
static const struct wacom_features wacom_features_0xB2 =
|
|
{ "Wacom Intuos3 9x12", 60960, 45720, 1023, 63,
|
|
INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
|
|
static const struct wacom_features wacom_features_0xB3 =
|
|
{ "Wacom Intuos3 12x12", 60960, 60960, 1023, 63,
|
|
INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
|
|
static const struct wacom_features wacom_features_0xB4 =
|
|
{ "Wacom Intuos3 12x19", 97536, 60960, 1023, 63,
|
|
INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
|
|
static const struct wacom_features wacom_features_0xB5 =
|
|
{ "Wacom Intuos3 6x11", 54204, 31750, 1023, 63,
|
|
INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
|
|
static const struct wacom_features wacom_features_0xB7 =
|
|
{ "Wacom Intuos3 4x6", 31496, 19685, 1023, 63,
|
|
INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 4 };
|
|
static const struct wacom_features wacom_features_0xB8 =
|
|
{ "Wacom Intuos4 4x6", 31496, 19685, 2047, 63,
|
|
INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7 };
|
|
static const struct wacom_features wacom_features_0xB9 =
|
|
{ "Wacom Intuos4 6x9", 44704, 27940, 2047, 63,
|
|
INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
|
|
static const struct wacom_features wacom_features_0xBA =
|
|
{ "Wacom Intuos4 8x13", 65024, 40640, 2047, 63,
|
|
INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
|
|
static const struct wacom_features wacom_features_0xBB =
|
|
{ "Wacom Intuos4 12x19", 97536, 60960, 2047, 63,
|
|
INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
|
|
static const struct wacom_features wacom_features_0xBC =
|
|
{ "Wacom Intuos4 WL", 40640, 25400, 2047, 63,
|
|
INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
|
|
static const struct wacom_features wacom_features_0xBD =
|
|
{ "Wacom Intuos4 WL", 40640, 25400, 2047, 63,
|
|
INTUOS4WL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
|
|
static const struct wacom_features wacom_features_0x26 =
|
|
{ "Wacom Intuos5 touch S", 31496, 19685, 2047, 63,
|
|
INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 16 };
|
|
static const struct wacom_features wacom_features_0x27 =
|
|
{ "Wacom Intuos5 touch M", 44704, 27940, 2047, 63,
|
|
INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16 };
|
|
static const struct wacom_features wacom_features_0x28 =
|
|
{ "Wacom Intuos5 touch L", 65024, 40640, 2047, 63,
|
|
INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16 };
|
|
static const struct wacom_features wacom_features_0x29 =
|
|
{ "Wacom Intuos5 S", 31496, 19685, 2047, 63,
|
|
INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7 };
|
|
static const struct wacom_features wacom_features_0x2A =
|
|
{ "Wacom Intuos5 M", 44704, 27940, 2047, 63,
|
|
INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
|
|
static const struct wacom_features wacom_features_0x314 =
|
|
{ "Wacom Intuos Pro S", 31496, 19685, 2047, 63,
|
|
INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 16,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x315 =
|
|
{ "Wacom Intuos Pro M", 44704, 27940, 2047, 63,
|
|
INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x317 =
|
|
{ "Wacom Intuos Pro L", 65024, 40640, 2047, 63,
|
|
INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0xF4 =
|
|
{ "Wacom Cintiq 24HD", 104080, 65200, 2047, 63,
|
|
WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 16,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
|
|
static const struct wacom_features wacom_features_0xF8 =
|
|
{ "Wacom Cintiq 24HD touch", 104080, 65200, 2047, 63, /* Pen */
|
|
WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 16,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
|
|
static const struct wacom_features wacom_features_0xF6 =
|
|
{ "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x32A =
|
|
{ "Wacom Cintiq 27QHD", 119740, 67520, 2047, 63,
|
|
WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 0,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
|
|
static const struct wacom_features wacom_features_0x32B =
|
|
{ "Wacom Cintiq 27QHD touch", 119740, 67520, 2047, 63,
|
|
WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 0,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32C };
|
|
static const struct wacom_features wacom_features_0x32C =
|
|
{ "Wacom Cintiq 27QHD touch", .type = WACOM_27QHDT,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32B, .touch_max = 10 };
|
|
static const struct wacom_features wacom_features_0x3F =
|
|
{ "Wacom Cintiq 21UX", 87200, 65600, 1023, 63,
|
|
CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
|
|
static const struct wacom_features wacom_features_0xC5 =
|
|
{ "Wacom Cintiq 20WSX", 86680, 54180, 1023, 63,
|
|
WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 10 };
|
|
static const struct wacom_features wacom_features_0xC6 =
|
|
{ "Wacom Cintiq 12WX", 53020, 33440, 1023, 63,
|
|
WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 10 };
|
|
static const struct wacom_features wacom_features_0x304 =
|
|
{ "Wacom Cintiq 13HD", 59152, 33448, 1023, 63,
|
|
WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
|
|
static const struct wacom_features wacom_features_0x333 =
|
|
{ "Wacom Cintiq 13HD touch", 59152, 33448, 2047, 63,
|
|
WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x335 };
|
|
static const struct wacom_features wacom_features_0x335 =
|
|
{ "Wacom Cintiq 13HD touch", .type = WACOM_24HDT, /* Touch */
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x333, .touch_max = 10,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0xC7 =
|
|
{ "Wacom DTU1931", 37832, 30305, 511, 0,
|
|
PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xCE =
|
|
{ "Wacom DTU2231", 47864, 27011, 511, 0,
|
|
DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBMOUSE };
|
|
static const struct wacom_features wacom_features_0xF0 =
|
|
{ "Wacom DTU1631", 34623, 19553, 511, 0,
|
|
DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xFB =
|
|
{ "Wacom DTU1031", 21896, 13760, 511, 0,
|
|
DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
|
|
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
|
|
static const struct wacom_features wacom_features_0x32F =
|
|
{ "Wacom DTU1031X", 22472, 12728, 511, 0,
|
|
DTUSX, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 0,
|
|
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
|
|
static const struct wacom_features wacom_features_0x336 =
|
|
{ "Wacom DTU1141", 23472, 13203, 1023, 0,
|
|
DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
|
|
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
|
|
static const struct wacom_features wacom_features_0x57 =
|
|
{ "Wacom DTK2241", 95640, 54060, 2047, 63,
|
|
DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 6,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
|
|
static const struct wacom_features wacom_features_0x59 = /* Pen */
|
|
{ "Wacom DTH2242", 95640, 54060, 2047, 63,
|
|
DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 6,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D };
|
|
static const struct wacom_features wacom_features_0x5D = /* Touch */
|
|
{ "Wacom DTH2242", .type = WACOM_24HDT,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0xCC =
|
|
{ "Wacom Cintiq 21UX2", 86800, 65200, 2047, 63,
|
|
WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
|
|
static const struct wacom_features wacom_features_0xFA =
|
|
{ "Wacom Cintiq 22HD", 95440, 53860, 2047, 63,
|
|
WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
|
|
static const struct wacom_features wacom_features_0x5B =
|
|
{ "Wacom Cintiq 22HDT", 95440, 53860, 2047, 63,
|
|
WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e };
|
|
static const struct wacom_features wacom_features_0x5E =
|
|
{ "Wacom Cintiq 22HDT", .type = WACOM_24HDT,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x90 =
|
|
{ "Wacom ISDv4 90", 26202, 16325, 255, 0,
|
|
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x93 =
|
|
{ "Wacom ISDv4 93", 26202, 16325, 255, 0,
|
|
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x97 =
|
|
{ "Wacom ISDv4 97", 26202, 16325, 511, 0,
|
|
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x9A =
|
|
{ "Wacom ISDv4 9A", 26202, 16325, 255, 0,
|
|
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x9F =
|
|
{ "Wacom ISDv4 9F", 26202, 16325, 255, 0,
|
|
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xE2 =
|
|
{ "Wacom ISDv4 E2", 26202, 16325, 255, 0,
|
|
TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xE3 =
|
|
{ "Wacom ISDv4 E3", 26202, 16325, 255, 0,
|
|
TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xE5 =
|
|
{ "Wacom ISDv4 E5", 26202, 16325, 255, 0,
|
|
MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xE6 =
|
|
{ "Wacom ISDv4 E6", 27760, 15694, 255, 0,
|
|
TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xEC =
|
|
{ "Wacom ISDv4 EC", 25710, 14500, 255, 0,
|
|
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xED =
|
|
{ "Wacom ISDv4 ED", 26202, 16325, 255, 0,
|
|
TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xEF =
|
|
{ "Wacom ISDv4 EF", 26202, 16325, 255, 0,
|
|
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x100 =
|
|
{ "Wacom ISDv4 100", 26202, 16325, 255, 0,
|
|
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x101 =
|
|
{ "Wacom ISDv4 101", 26202, 16325, 255, 0,
|
|
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x10D =
|
|
{ "Wacom ISDv4 10D", 26202, 16325, 255, 0,
|
|
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x10E =
|
|
{ "Wacom ISDv4 10E", 27760, 15694, 255, 0,
|
|
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x10F =
|
|
{ "Wacom ISDv4 10F", 27760, 15694, 255, 0,
|
|
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x116 =
|
|
{ "Wacom ISDv4 116", 26202, 16325, 255, 0,
|
|
TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x12C =
|
|
{ "Wacom ISDv4 12C", 27848, 15752, 2047, 0,
|
|
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x4001 =
|
|
{ "Wacom ISDv4 4001", 26202, 16325, 255, 0,
|
|
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x4004 =
|
|
{ "Wacom ISDv4 4004", 11060, 6220, 255, 0,
|
|
MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x5000 =
|
|
{ "Wacom ISDv4 5000", 27848, 15752, 1023, 0,
|
|
MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x5002 =
|
|
{ "Wacom ISDv4 5002", 29576, 16724, 1023, 0,
|
|
MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x47 =
|
|
{ "Wacom Intuos2 6x8", 20320, 16240, 1023, 31,
|
|
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x84 =
|
|
{ "Wacom Wireless Receiver", .type = WIRELESS, .touch_max = 16 };
|
|
static const struct wacom_features wacom_features_0xD0 =
|
|
{ "Wacom Bamboo 2FG", 14720, 9200, 1023, 31,
|
|
BAMBOO_TOUCH, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xD1 =
|
|
{ "Wacom Bamboo 2FG 4x5", 14720, 9200, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xD2 =
|
|
{ "Wacom Bamboo Craft", 14720, 9200, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xD3 =
|
|
{ "Wacom Bamboo 2FG 6x8", 21648, 13700, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xD4 =
|
|
{ "Wacom Bamboo Pen", 14720, 9200, 1023, 31,
|
|
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xD5 =
|
|
{ "Wacom Bamboo Pen 6x8", 21648, 13700, 1023, 31,
|
|
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xD6 =
|
|
{ "Wacom BambooPT 2FG 4x5", 14720, 9200, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xD7 =
|
|
{ "Wacom BambooPT 2FG Small", 14720, 9200, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xD8 =
|
|
{ "Wacom Bamboo Comic 2FG", 21648, 13700, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xDA =
|
|
{ "Wacom Bamboo 2FG 4x5 SE", 14720, 9200, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xDB =
|
|
{ "Wacom Bamboo 2FG 6x8 SE", 21648, 13700, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
|
|
static const struct wacom_features wacom_features_0xDD =
|
|
{ "Wacom Bamboo Connect", 14720, 9200, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0xDE =
|
|
{ "Wacom Bamboo 16FG 4x5", 14720, 9200, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 };
|
|
static const struct wacom_features wacom_features_0xDF =
|
|
{ "Wacom Bamboo 16FG 6x8", 21648, 13700, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 };
|
|
static const struct wacom_features wacom_features_0x300 =
|
|
{ "Wacom Bamboo One S", 14720, 9225, 1023, 31,
|
|
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x301 =
|
|
{ "Wacom Bamboo One M", 21648, 13530, 1023, 31,
|
|
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x302 =
|
|
{ "Wacom Intuos PT S", 15200, 9500, 1023, 31,
|
|
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x303 =
|
|
{ "Wacom Intuos PT M", 21600, 13500, 1023, 31,
|
|
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x30E =
|
|
{ "Wacom Intuos S", 15200, 9500, 1023, 31,
|
|
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x6004 =
|
|
{ "ISD-V4", 12800, 8000, 255, 0,
|
|
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
|
|
static const struct wacom_features wacom_features_0x307 =
|
|
{ "Wacom ISDv5 307", 59152, 33448, 2047, 63,
|
|
CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 };
|
|
static const struct wacom_features wacom_features_0x309 =
|
|
{ "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x30A =
|
|
{ "Wacom ISDv5 30A", 59152, 33448, 2047, 63,
|
|
CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30C };
|
|
static const struct wacom_features wacom_features_0x30C =
|
|
{ "Wacom ISDv5 30C", .type = WACOM_24HDT, /* Touch */
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30A, .touch_max = 10,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x318 =
|
|
{ "Wacom USB Bamboo PAD", 4095, 4095, /* Touch */
|
|
.type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
|
|
static const struct wacom_features wacom_features_0x319 =
|
|
{ "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */
|
|
.type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
|
|
static const struct wacom_features wacom_features_0x325 =
|
|
{ "Wacom ISDv5 325", 59552, 33848, 2047, 63,
|
|
CINTIQ_COMPANION_2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 11,
|
|
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
|
|
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x326 };
|
|
static const struct wacom_features wacom_features_0x326 = /* Touch */
|
|
{ "Wacom ISDv5 326", .type = HID_GENERIC, .oVid = USB_VENDOR_ID_WACOM,
|
|
.oPid = 0x325 };
|
|
static const struct wacom_features wacom_features_0x323 =
|
|
{ "Wacom Intuos P M", 21600, 13500, 1023, 31,
|
|
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x331 =
|
|
{ "Wacom Express Key Remote", .type = REMOTE,
|
|
.numbered_buttons = 18, .check_for_hid_type = true,
|
|
.hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x33B =
|
|
{ "Wacom Intuos S 2", 15200, 9500, 2047, 63,
|
|
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x33C =
|
|
{ "Wacom Intuos PT S 2", 15200, 9500, 2047, 63,
|
|
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x33D =
|
|
{ "Wacom Intuos P M 2", 21600, 13500, 2047, 63,
|
|
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x33E =
|
|
{ "Wacom Intuos PT M 2", 21600, 13500, 2047, 63,
|
|
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
|
|
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
|
|
static const struct wacom_features wacom_features_0x343 =
|
|
{ "Wacom DTK1651", 34616, 19559, 1023, 0,
|
|
DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
|
|
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
|
|
|
|
static const struct wacom_features wacom_features_HID_ANY_ID =
|
|
{ "Wacom HID", .type = HID_GENERIC };
|
|
|
|
#define USB_DEVICE_WACOM(prod) \
|
|
HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
|
|
.driver_data = (kernel_ulong_t)&wacom_features_##prod
|
|
|
|
#define BT_DEVICE_WACOM(prod) \
|
|
HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
|
|
.driver_data = (kernel_ulong_t)&wacom_features_##prod
|
|
|
|
#define I2C_DEVICE_WACOM(prod) \
|
|
HID_DEVICE(BUS_I2C, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
|
|
.driver_data = (kernel_ulong_t)&wacom_features_##prod
|
|
|
|
#define USB_DEVICE_LENOVO(prod) \
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \
|
|
.driver_data = (kernel_ulong_t)&wacom_features_##prod
|
|
|
|
const struct hid_device_id wacom_ids[] = {
|
|
{ USB_DEVICE_WACOM(0x00) },
|
|
{ USB_DEVICE_WACOM(0x03) },
|
|
{ USB_DEVICE_WACOM(0x10) },
|
|
{ USB_DEVICE_WACOM(0x11) },
|
|
{ USB_DEVICE_WACOM(0x12) },
|
|
{ USB_DEVICE_WACOM(0x13) },
|
|
{ USB_DEVICE_WACOM(0x14) },
|
|
{ USB_DEVICE_WACOM(0x15) },
|
|
{ USB_DEVICE_WACOM(0x16) },
|
|
{ USB_DEVICE_WACOM(0x17) },
|
|
{ USB_DEVICE_WACOM(0x18) },
|
|
{ USB_DEVICE_WACOM(0x19) },
|
|
{ USB_DEVICE_WACOM(0x20) },
|
|
{ USB_DEVICE_WACOM(0x21) },
|
|
{ USB_DEVICE_WACOM(0x22) },
|
|
{ USB_DEVICE_WACOM(0x23) },
|
|
{ USB_DEVICE_WACOM(0x24) },
|
|
{ USB_DEVICE_WACOM(0x26) },
|
|
{ USB_DEVICE_WACOM(0x27) },
|
|
{ USB_DEVICE_WACOM(0x28) },
|
|
{ USB_DEVICE_WACOM(0x29) },
|
|
{ USB_DEVICE_WACOM(0x2A) },
|
|
{ USB_DEVICE_WACOM(0x30) },
|
|
{ USB_DEVICE_WACOM(0x31) },
|
|
{ USB_DEVICE_WACOM(0x32) },
|
|
{ USB_DEVICE_WACOM(0x33) },
|
|
{ USB_DEVICE_WACOM(0x34) },
|
|
{ USB_DEVICE_WACOM(0x35) },
|
|
{ USB_DEVICE_WACOM(0x37) },
|
|
{ USB_DEVICE_WACOM(0x38) },
|
|
{ USB_DEVICE_WACOM(0x39) },
|
|
{ USB_DEVICE_WACOM(0x3F) },
|
|
{ USB_DEVICE_WACOM(0x41) },
|
|
{ USB_DEVICE_WACOM(0x42) },
|
|
{ USB_DEVICE_WACOM(0x43) },
|
|
{ USB_DEVICE_WACOM(0x44) },
|
|
{ USB_DEVICE_WACOM(0x45) },
|
|
{ USB_DEVICE_WACOM(0x47) },
|
|
{ USB_DEVICE_WACOM(0x57) },
|
|
{ USB_DEVICE_WACOM(0x59) },
|
|
{ USB_DEVICE_WACOM(0x5B) },
|
|
{ USB_DEVICE_WACOM(0x5D) },
|
|
{ USB_DEVICE_WACOM(0x5E) },
|
|
{ USB_DEVICE_WACOM(0x60) },
|
|
{ USB_DEVICE_WACOM(0x61) },
|
|
{ USB_DEVICE_WACOM(0x62) },
|
|
{ USB_DEVICE_WACOM(0x63) },
|
|
{ USB_DEVICE_WACOM(0x64) },
|
|
{ USB_DEVICE_WACOM(0x65) },
|
|
{ USB_DEVICE_WACOM(0x69) },
|
|
{ USB_DEVICE_WACOM(0x6A) },
|
|
{ USB_DEVICE_WACOM(0x6B) },
|
|
{ BT_DEVICE_WACOM(0x81) },
|
|
{ USB_DEVICE_WACOM(0x84) },
|
|
{ USB_DEVICE_WACOM(0x90) },
|
|
{ USB_DEVICE_WACOM(0x93) },
|
|
{ USB_DEVICE_WACOM(0x97) },
|
|
{ USB_DEVICE_WACOM(0x9A) },
|
|
{ USB_DEVICE_WACOM(0x9F) },
|
|
{ USB_DEVICE_WACOM(0xB0) },
|
|
{ USB_DEVICE_WACOM(0xB1) },
|
|
{ USB_DEVICE_WACOM(0xB2) },
|
|
{ USB_DEVICE_WACOM(0xB3) },
|
|
{ USB_DEVICE_WACOM(0xB4) },
|
|
{ USB_DEVICE_WACOM(0xB5) },
|
|
{ USB_DEVICE_WACOM(0xB7) },
|
|
{ USB_DEVICE_WACOM(0xB8) },
|
|
{ USB_DEVICE_WACOM(0xB9) },
|
|
{ USB_DEVICE_WACOM(0xBA) },
|
|
{ USB_DEVICE_WACOM(0xBB) },
|
|
{ USB_DEVICE_WACOM(0xBC) },
|
|
{ BT_DEVICE_WACOM(0xBD) },
|
|
{ USB_DEVICE_WACOM(0xC0) },
|
|
{ USB_DEVICE_WACOM(0xC2) },
|
|
{ USB_DEVICE_WACOM(0xC4) },
|
|
{ USB_DEVICE_WACOM(0xC5) },
|
|
{ USB_DEVICE_WACOM(0xC6) },
|
|
{ USB_DEVICE_WACOM(0xC7) },
|
|
{ USB_DEVICE_WACOM(0xCC) },
|
|
{ USB_DEVICE_WACOM(0xCE) },
|
|
{ USB_DEVICE_WACOM(0xD0) },
|
|
{ USB_DEVICE_WACOM(0xD1) },
|
|
{ USB_DEVICE_WACOM(0xD2) },
|
|
{ USB_DEVICE_WACOM(0xD3) },
|
|
{ USB_DEVICE_WACOM(0xD4) },
|
|
{ USB_DEVICE_WACOM(0xD5) },
|
|
{ USB_DEVICE_WACOM(0xD6) },
|
|
{ USB_DEVICE_WACOM(0xD7) },
|
|
{ USB_DEVICE_WACOM(0xD8) },
|
|
{ USB_DEVICE_WACOM(0xDA) },
|
|
{ USB_DEVICE_WACOM(0xDB) },
|
|
{ USB_DEVICE_WACOM(0xDD) },
|
|
{ USB_DEVICE_WACOM(0xDE) },
|
|
{ USB_DEVICE_WACOM(0xDF) },
|
|
{ USB_DEVICE_WACOM(0xE2) },
|
|
{ USB_DEVICE_WACOM(0xE3) },
|
|
{ USB_DEVICE_WACOM(0xE5) },
|
|
{ USB_DEVICE_WACOM(0xE6) },
|
|
{ USB_DEVICE_WACOM(0xEC) },
|
|
{ USB_DEVICE_WACOM(0xED) },
|
|
{ USB_DEVICE_WACOM(0xEF) },
|
|
{ USB_DEVICE_WACOM(0xF0) },
|
|
{ USB_DEVICE_WACOM(0xF4) },
|
|
{ USB_DEVICE_WACOM(0xF6) },
|
|
{ USB_DEVICE_WACOM(0xF8) },
|
|
{ USB_DEVICE_WACOM(0xFA) },
|
|
{ USB_DEVICE_WACOM(0xFB) },
|
|
{ USB_DEVICE_WACOM(0x100) },
|
|
{ USB_DEVICE_WACOM(0x101) },
|
|
{ USB_DEVICE_WACOM(0x10D) },
|
|
{ USB_DEVICE_WACOM(0x10E) },
|
|
{ USB_DEVICE_WACOM(0x10F) },
|
|
{ USB_DEVICE_WACOM(0x116) },
|
|
{ USB_DEVICE_WACOM(0x12C) },
|
|
{ USB_DEVICE_WACOM(0x300) },
|
|
{ USB_DEVICE_WACOM(0x301) },
|
|
{ USB_DEVICE_WACOM(0x302) },
|
|
{ USB_DEVICE_WACOM(0x303) },
|
|
{ USB_DEVICE_WACOM(0x304) },
|
|
{ USB_DEVICE_WACOM(0x307) },
|
|
{ USB_DEVICE_WACOM(0x309) },
|
|
{ USB_DEVICE_WACOM(0x30A) },
|
|
{ USB_DEVICE_WACOM(0x30C) },
|
|
{ USB_DEVICE_WACOM(0x30E) },
|
|
{ USB_DEVICE_WACOM(0x314) },
|
|
{ USB_DEVICE_WACOM(0x315) },
|
|
{ USB_DEVICE_WACOM(0x317) },
|
|
{ USB_DEVICE_WACOM(0x318) },
|
|
{ USB_DEVICE_WACOM(0x319) },
|
|
{ USB_DEVICE_WACOM(0x323) },
|
|
{ USB_DEVICE_WACOM(0x325) },
|
|
{ USB_DEVICE_WACOM(0x326) },
|
|
{ USB_DEVICE_WACOM(0x32A) },
|
|
{ USB_DEVICE_WACOM(0x32B) },
|
|
{ USB_DEVICE_WACOM(0x32C) },
|
|
{ USB_DEVICE_WACOM(0x32F) },
|
|
{ USB_DEVICE_WACOM(0x331) },
|
|
{ USB_DEVICE_WACOM(0x333) },
|
|
{ USB_DEVICE_WACOM(0x335) },
|
|
{ USB_DEVICE_WACOM(0x336) },
|
|
{ USB_DEVICE_WACOM(0x33B) },
|
|
{ USB_DEVICE_WACOM(0x33C) },
|
|
{ USB_DEVICE_WACOM(0x33D) },
|
|
{ USB_DEVICE_WACOM(0x33E) },
|
|
{ USB_DEVICE_WACOM(0x343) },
|
|
{ USB_DEVICE_WACOM(0x4001) },
|
|
{ USB_DEVICE_WACOM(0x4004) },
|
|
{ USB_DEVICE_WACOM(0x5000) },
|
|
{ USB_DEVICE_WACOM(0x5002) },
|
|
{ USB_DEVICE_LENOVO(0x6004) },
|
|
|
|
{ USB_DEVICE_WACOM(HID_ANY_ID) },
|
|
{ I2C_DEVICE_WACOM(HID_ANY_ID) },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(hid, wacom_ids);
|