linux/drivers/net/wireless/iwlwifi/iwl-6000.c
Reinette Chatre b7a794048f iwlwifi: fix 3945 ucode info retrieval after failure
When hardware or uCode problem occurs driver captures significant
information from device to enable debugging. The format of this information
is different between 3945 and 4965 and later devices, yet currently the
3945 uses the 4965 and later format. Fix this by adding a new library call
that is initialized to the correct formatting routine based on device.

This moves the iwlagn event and error log handling back to iwl-agn.c to
make it part of iwlagn module.

Also remove the 3945 sysfs file that triggers dump of event log - there is
already a debugfs file that can do it for all drivers.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28 16:55:05 -04:00

265 lines
8.4 KiB
C

/******************************************************************************
*
* Copyright(c) 2008-2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-sta.h"
#include "iwl-helpers.h"
#include "iwl-5000-hw.h"
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
#define IWL6050_UCODE_API_MAX 4
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 1
#define IWL6050_UCODE_API_MIN 1
#define IWL6000_FW_PRE "iwlwifi-6000-"
#define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
#define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
#define IWL6050_FW_PRE "iwlwifi-6050-"
#define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
#define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}
/* NIC configuration for 6000 series */
static void iwl6000_nic_config(struct iwl_priv *priv)
{
iwl5000_nic_config(priv);
/* no locking required for register write */
if (priv->cfg->pa_type == IWL_PA_HYBRID) {
/* 2x2 hybrid phy type */
iwl_write32(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB);
} else if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
/* 2x2 IPA phy type */
iwl_write32(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
}
/* else do nothing, uCode configured */
}
static struct iwl_lib_ops iwl6000_lib = {
.set_hw_params = iwl5000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwl5000_txq_set_sched,
.txq_agg_enable = iwl5000_txq_agg_enable,
.txq_agg_disable = iwl5000_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwl5000_rx_handler_setup,
.setup_deferred_work = iwl5000_setup_deferred_work,
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
.load_ucode = iwl5000_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.send_tx_power = iwl5000_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.apm_ops = {
.init = iwl5000_apm_init,
.reset = iwl5000_apm_reset,
.stop = iwl5000_apm_stop,
.config = iwl6000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_5000_REG_BAND_1_CHANNELS,
EEPROM_5000_REG_BAND_2_CHANNELS,
EEPROM_5000_REG_BAND_3_CHANNELS,
EEPROM_5000_REG_BAND_4_CHANNELS,
EEPROM_5000_REG_BAND_5_CHANNELS,
EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwl5000_eeprom_calib_version,
.query_addr = iwl5000_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
.post_associate = iwl_post_associate,
.isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwl5000_temperature,
.set_ct_kill = iwl6000_set_ct_threshold,
},
};
static struct iwl_hcmd_utils_ops iwl6000_hcmd_utils = {
.get_hcmd_size = iwl5000_get_hcmd_size,
.build_addsta_hcmd = iwl5000_build_addsta_hcmd,
.rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
.calc_rssi = iwl5000_calc_rssi,
};
static struct iwl_ops iwl6000_ops = {
.ucode = &iwl5000_ucode,
.lib = &iwl6000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl6000_hcmd_utils,
};
/*
* "h": Hybrid configuration, use both internal and external Power Amplifier
*/
struct iwl_cfg iwl6000h_2agn_cfg = {
.name = "6000 Series 2x2 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
.pa_type = IWL_PA_HYBRID,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
};
/*
* "i": Internal configuration, use internal Power Amplifier
*/
struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "6000 Series 2x2 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.need_pll_cfg = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
};
struct iwl_cfg iwl6050_2agn_cfg = {
.name = "6050 Series 2x2 AGN",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
};
struct iwl_cfg iwl6000_3agn_cfg = {
.name = "6000 Series 3x3 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.need_pll_cfg = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
};
struct iwl_cfg iwl6050_3agn_cfg = {
.name = "6050 Series 3x3 AGN",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.need_pll_cfg = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));