forked from Minki/linux
b7a794048f
When hardware or uCode problem occurs driver captures significant information from device to enable debugging. The format of this information is different between 3945 and 4965 and later devices, yet currently the 3945 uses the 4965 and later format. Fix this by adding a new library call that is initialized to the correct formatting routine based on device. This moves the iwlagn event and error log handling back to iwl-agn.c to make it part of iwlagn module. Also remove the 3945 sysfs file that triggers dump of event log - there is already a debugfs file that can do it for all drivers. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
166 lines
5.5 KiB
C
166 lines
5.5 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2008-2009 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/wireless.h>
|
|
#include <net/mac80211.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "iwl-eeprom.h"
|
|
#include "iwl-dev.h"
|
|
#include "iwl-core.h"
|
|
#include "iwl-io.h"
|
|
#include "iwl-sta.h"
|
|
#include "iwl-helpers.h"
|
|
#include "iwl-5000-hw.h"
|
|
|
|
/* Highest firmware API version supported */
|
|
#define IWL1000_UCODE_API_MAX 3
|
|
|
|
/* Lowest firmware API version supported */
|
|
#define IWL1000_UCODE_API_MIN 1
|
|
|
|
#define IWL1000_FW_PRE "iwlwifi-1000-"
|
|
#define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
|
|
#define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api)
|
|
|
|
|
|
/*
|
|
* For 1000, use advance thermal throttling critical temperature threshold,
|
|
* but legacy thermal management implementation for now.
|
|
* This is for the reason of 1000 uCode using advance thermal throttling API
|
|
* but not implement ct_kill_exit based on ct_kill exit temperature
|
|
* so the thermal throttling will still based on legacy thermal throttling
|
|
* management.
|
|
* The code here need to be modified once 1000 uCode has the advanced thermal
|
|
* throttling algorithm in place
|
|
*/
|
|
static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
|
|
{
|
|
/* want Celsius */
|
|
priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
|
|
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
|
|
}
|
|
|
|
/* NIC configuration for 1000 series */
|
|
static void iwl1000_nic_config(struct iwl_priv *priv)
|
|
{
|
|
iwl5000_nic_config(priv);
|
|
|
|
/* Setting digital SVR for 1000 card to 1.32V */
|
|
/* locking is acquired in iwl_set_bits_mask_prph() function */
|
|
iwl_set_bits_mask_prph(priv, APMG_DIGITAL_SVR_REG,
|
|
APMG_SVR_DIGITAL_VOLTAGE_1_32,
|
|
~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
|
|
}
|
|
|
|
static struct iwl_lib_ops iwl1000_lib = {
|
|
.set_hw_params = iwl5000_hw_set_hw_params,
|
|
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
|
|
.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
|
|
.txq_set_sched = iwl5000_txq_set_sched,
|
|
.txq_agg_enable = iwl5000_txq_agg_enable,
|
|
.txq_agg_disable = iwl5000_txq_agg_disable,
|
|
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
|
|
.txq_free_tfd = iwl_hw_txq_free_tfd,
|
|
.txq_init = iwl_hw_tx_queue_init,
|
|
.rx_handler_setup = iwl5000_rx_handler_setup,
|
|
.setup_deferred_work = iwl5000_setup_deferred_work,
|
|
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
|
|
.load_ucode = iwl5000_load_ucode,
|
|
.dump_nic_event_log = iwl_dump_nic_event_log,
|
|
.dump_nic_error_log = iwl_dump_nic_error_log,
|
|
.init_alive_start = iwl5000_init_alive_start,
|
|
.alive_notify = iwl5000_alive_notify,
|
|
.send_tx_power = iwl5000_send_tx_power,
|
|
.update_chain_flags = iwl_update_chain_flags,
|
|
.apm_ops = {
|
|
.init = iwl5000_apm_init,
|
|
.reset = iwl5000_apm_reset,
|
|
.stop = iwl5000_apm_stop,
|
|
.config = iwl1000_nic_config,
|
|
.set_pwr_src = iwl_set_pwr_src,
|
|
},
|
|
.eeprom_ops = {
|
|
.regulatory_bands = {
|
|
EEPROM_5000_REG_BAND_1_CHANNELS,
|
|
EEPROM_5000_REG_BAND_2_CHANNELS,
|
|
EEPROM_5000_REG_BAND_3_CHANNELS,
|
|
EEPROM_5000_REG_BAND_4_CHANNELS,
|
|
EEPROM_5000_REG_BAND_5_CHANNELS,
|
|
EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
|
|
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
|
|
},
|
|
.verify_signature = iwlcore_eeprom_verify_signature,
|
|
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
|
|
.release_semaphore = iwlcore_eeprom_release_semaphore,
|
|
.calib_version = iwl5000_eeprom_calib_version,
|
|
.query_addr = iwl5000_eeprom_query_addr,
|
|
},
|
|
.post_associate = iwl_post_associate,
|
|
.isr = iwl_isr_ict,
|
|
.config_ap = iwl_config_ap,
|
|
.temp_ops = {
|
|
.temperature = iwl5000_temperature,
|
|
.set_ct_kill = iwl1000_set_ct_threshold,
|
|
},
|
|
};
|
|
|
|
static struct iwl_ops iwl1000_ops = {
|
|
.ucode = &iwl5000_ucode,
|
|
.lib = &iwl1000_lib,
|
|
.hcmd = &iwl5000_hcmd,
|
|
.utils = &iwl5000_hcmd_utils,
|
|
};
|
|
|
|
struct iwl_cfg iwl1000_bgn_cfg = {
|
|
.name = "1000 Series BGN",
|
|
.fw_name_pre = IWL1000_FW_PRE,
|
|
.ucode_api_max = IWL1000_UCODE_API_MAX,
|
|
.ucode_api_min = IWL1000_UCODE_API_MIN,
|
|
.sku = IWL_SKU_G|IWL_SKU_N,
|
|
.ops = &iwl1000_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
|
|
.mod_params = &iwl50_mod_params,
|
|
.valid_tx_ant = ANT_A,
|
|
.valid_rx_ant = ANT_AB,
|
|
.need_pll_cfg = true,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
|
|
.shadow_ram_support = false,
|
|
.ht_greenfield_support = true,
|
|
};
|
|
|