forked from Minki/linux
c8e6f90d82
Provide proper (real) struct device to request_firmware() call. This fixes following error messages: (NULL device *): Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 (NULL device *): Direct firmware load for s5p-mfc-v6.fw failed with error -2 into a bit more meaningful ones: s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
487 lines
12 KiB
C
487 lines
12 KiB
C
/*
|
|
* linux/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
|
|
*
|
|
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/sched.h>
|
|
#include "s5p_mfc_cmd.h"
|
|
#include "s5p_mfc_common.h"
|
|
#include "s5p_mfc_debug.h"
|
|
#include "s5p_mfc_intr.h"
|
|
#include "s5p_mfc_opr.h"
|
|
#include "s5p_mfc_pm.h"
|
|
#include "s5p_mfc_ctrl.h"
|
|
|
|
/* Allocate memory for firmware */
|
|
int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev)
|
|
{
|
|
struct s5p_mfc_priv_buf *fw_buf = &dev->fw_buf;
|
|
int err;
|
|
|
|
fw_buf->size = dev->variant->buf_size->fw;
|
|
|
|
if (fw_buf->virt) {
|
|
mfc_err("Attempting to allocate firmware when it seems that it is already loaded\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
err = s5p_mfc_alloc_priv_buf(dev, BANK_L_CTX, &dev->fw_buf);
|
|
if (err) {
|
|
mfc_err("Allocating bitprocessor buffer failed\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Load firmware */
|
|
int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
|
|
{
|
|
struct firmware *fw_blob;
|
|
int i, err = -EINVAL;
|
|
|
|
/* Firmare has to be present as a separate file or compiled
|
|
* into kernel. */
|
|
mfc_debug_enter();
|
|
|
|
if (dev->fw_get_done)
|
|
return 0;
|
|
|
|
for (i = MFC_FW_MAX_VERSIONS - 1; i >= 0; i--) {
|
|
if (!dev->variant->fw_name[i])
|
|
continue;
|
|
err = request_firmware((const struct firmware **)&fw_blob,
|
|
dev->variant->fw_name[i], &dev->plat_dev->dev);
|
|
if (!err) {
|
|
dev->fw_ver = (enum s5p_mfc_fw_ver) i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (err != 0) {
|
|
mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
|
|
return -EINVAL;
|
|
}
|
|
if (fw_blob->size > dev->fw_buf.size) {
|
|
mfc_err("MFC firmware is too big to be loaded\n");
|
|
release_firmware(fw_blob);
|
|
return -ENOMEM;
|
|
}
|
|
memcpy(dev->fw_buf.virt, fw_blob->data, fw_blob->size);
|
|
wmb();
|
|
dev->fw_get_done = true;
|
|
release_firmware(fw_blob);
|
|
mfc_debug_leave();
|
|
return 0;
|
|
}
|
|
|
|
/* Release firmware memory */
|
|
int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
|
|
{
|
|
/* Before calling this function one has to make sure
|
|
* that MFC is no longer processing */
|
|
s5p_mfc_release_priv_buf(dev, &dev->fw_buf);
|
|
dev->fw_get_done = false;
|
|
return 0;
|
|
}
|
|
|
|
static int s5p_mfc_bus_reset(struct s5p_mfc_dev *dev)
|
|
{
|
|
unsigned int status;
|
|
unsigned long timeout;
|
|
|
|
/* Reset */
|
|
mfc_write(dev, 0x1, S5P_FIMV_MFC_BUS_RESET_CTRL);
|
|
timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
|
|
/* Check bus status */
|
|
do {
|
|
if (time_after(jiffies, timeout)) {
|
|
mfc_err("Timeout while resetting MFC.\n");
|
|
return -EIO;
|
|
}
|
|
status = mfc_read(dev, S5P_FIMV_MFC_BUS_RESET_CTRL);
|
|
} while ((status & 0x2) == 0);
|
|
return 0;
|
|
}
|
|
|
|
/* Reset the device */
|
|
int s5p_mfc_reset(struct s5p_mfc_dev *dev)
|
|
{
|
|
unsigned int mc_status;
|
|
unsigned long timeout;
|
|
int i;
|
|
|
|
mfc_debug_enter();
|
|
|
|
if (IS_MFCV6_PLUS(dev)) {
|
|
/* Zero Initialization of MFC registers */
|
|
mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD_V6);
|
|
mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD_V6);
|
|
mfc_write(dev, 0, S5P_FIMV_FW_VERSION_V6);
|
|
|
|
for (i = 0; i < S5P_FIMV_REG_CLEAR_COUNT_V6; i++)
|
|
mfc_write(dev, 0, S5P_FIMV_REG_CLEAR_BEGIN_V6 + (i*4));
|
|
|
|
/* check bus reset control before reset */
|
|
if (dev->risc_on)
|
|
if (s5p_mfc_bus_reset(dev))
|
|
return -EIO;
|
|
/* Reset
|
|
* set RISC_ON to 0 during power_on & wake_up.
|
|
* V6 needs RISC_ON set to 0 during reset also.
|
|
*/
|
|
if ((!dev->risc_on) || (!IS_MFCV7_PLUS(dev)))
|
|
mfc_write(dev, 0, S5P_FIMV_RISC_ON_V6);
|
|
|
|
mfc_write(dev, 0x1FFF, S5P_FIMV_MFC_RESET_V6);
|
|
mfc_write(dev, 0, S5P_FIMV_MFC_RESET_V6);
|
|
} else {
|
|
/* Stop procedure */
|
|
/* reset RISC */
|
|
mfc_write(dev, 0x3f6, S5P_FIMV_SW_RESET);
|
|
/* All reset except for MC */
|
|
mfc_write(dev, 0x3e2, S5P_FIMV_SW_RESET);
|
|
mdelay(10);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
|
|
/* Check MC status */
|
|
do {
|
|
if (time_after(jiffies, timeout)) {
|
|
mfc_err("Timeout while resetting MFC\n");
|
|
return -EIO;
|
|
}
|
|
|
|
mc_status = mfc_read(dev, S5P_FIMV_MC_STATUS);
|
|
|
|
} while (mc_status & 0x3);
|
|
|
|
mfc_write(dev, 0x0, S5P_FIMV_SW_RESET);
|
|
mfc_write(dev, 0x3fe, S5P_FIMV_SW_RESET);
|
|
}
|
|
|
|
mfc_debug_leave();
|
|
return 0;
|
|
}
|
|
|
|
static inline void s5p_mfc_init_memctrl(struct s5p_mfc_dev *dev)
|
|
{
|
|
if (IS_MFCV6_PLUS(dev)) {
|
|
mfc_write(dev, dev->dma_base[BANK_L_CTX],
|
|
S5P_FIMV_RISC_BASE_ADDRESS_V6);
|
|
mfc_debug(2, "Base Address : %pad\n",
|
|
&dev->dma_base[BANK_L_CTX]);
|
|
} else {
|
|
mfc_write(dev, dev->dma_base[BANK_L_CTX],
|
|
S5P_FIMV_MC_DRAMBASE_ADR_A);
|
|
mfc_write(dev, dev->dma_base[BANK_R_CTX],
|
|
S5P_FIMV_MC_DRAMBASE_ADR_B);
|
|
mfc_debug(2, "Bank1: %pad, Bank2: %pad\n",
|
|
&dev->dma_base[BANK_L_CTX],
|
|
&dev->dma_base[BANK_R_CTX]);
|
|
}
|
|
}
|
|
|
|
static inline void s5p_mfc_clear_cmds(struct s5p_mfc_dev *dev)
|
|
{
|
|
if (IS_MFCV6_PLUS(dev)) {
|
|
/* Zero initialization should be done before RESET.
|
|
* Nothing to do here. */
|
|
} else {
|
|
mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH0_INST_ID);
|
|
mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH1_INST_ID);
|
|
mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD);
|
|
mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD);
|
|
}
|
|
}
|
|
|
|
/* Initialize hardware */
|
|
int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
|
|
{
|
|
unsigned int ver;
|
|
int ret;
|
|
|
|
mfc_debug_enter();
|
|
if (!dev->fw_buf.virt) {
|
|
mfc_err("Firmware memory is not allocated.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* 0. MFC reset */
|
|
mfc_debug(2, "MFC reset..\n");
|
|
s5p_mfc_clock_on();
|
|
dev->risc_on = 0;
|
|
ret = s5p_mfc_reset(dev);
|
|
if (ret) {
|
|
mfc_err("Failed to reset MFC - timeout\n");
|
|
return ret;
|
|
}
|
|
mfc_debug(2, "Done MFC reset..\n");
|
|
/* 1. Set DRAM base Addr */
|
|
s5p_mfc_init_memctrl(dev);
|
|
/* 2. Initialize registers of channel I/F */
|
|
s5p_mfc_clear_cmds(dev);
|
|
/* 3. Release reset signal to the RISC */
|
|
s5p_mfc_clean_dev_int_flags(dev);
|
|
if (IS_MFCV6_PLUS(dev)) {
|
|
dev->risc_on = 1;
|
|
mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
|
|
}
|
|
else
|
|
mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
|
|
|
|
if (IS_MFCV10(dev))
|
|
mfc_write(dev, 0x0, S5P_FIMV_MFC_CLOCK_OFF_V10);
|
|
|
|
mfc_debug(2, "Will now wait for completion of firmware transfer\n");
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_FW_STATUS_RET)) {
|
|
mfc_err("Failed to load firmware\n");
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_clock_off();
|
|
return -EIO;
|
|
}
|
|
s5p_mfc_clean_dev_int_flags(dev);
|
|
/* 4. Initialize firmware */
|
|
ret = s5p_mfc_hw_call(dev->mfc_cmds, sys_init_cmd, dev);
|
|
if (ret) {
|
|
mfc_err("Failed to send command to MFC - timeout\n");
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_clock_off();
|
|
return ret;
|
|
}
|
|
mfc_debug(2, "Ok, now will wait for completion of hardware init\n");
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_SYS_INIT_RET)) {
|
|
mfc_err("Failed to init hardware\n");
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_clock_off();
|
|
return -EIO;
|
|
}
|
|
dev->int_cond = 0;
|
|
if (dev->int_err != 0 || dev->int_type !=
|
|
S5P_MFC_R2H_CMD_SYS_INIT_RET) {
|
|
/* Failure. */
|
|
mfc_err("Failed to init firmware - error: %d int: %d\n",
|
|
dev->int_err, dev->int_type);
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_clock_off();
|
|
return -EIO;
|
|
}
|
|
if (IS_MFCV6_PLUS(dev))
|
|
ver = mfc_read(dev, S5P_FIMV_FW_VERSION_V6);
|
|
else
|
|
ver = mfc_read(dev, S5P_FIMV_FW_VERSION);
|
|
|
|
mfc_debug(2, "MFC F/W version : %02xyy, %02xmm, %02xdd\n",
|
|
(ver >> 16) & 0xFF, (ver >> 8) & 0xFF, ver & 0xFF);
|
|
s5p_mfc_clock_off();
|
|
mfc_debug_leave();
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Deinitialize hardware */
|
|
void s5p_mfc_deinit_hw(struct s5p_mfc_dev *dev)
|
|
{
|
|
s5p_mfc_clock_on();
|
|
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_dev_context_buffer, dev);
|
|
|
|
s5p_mfc_clock_off();
|
|
}
|
|
|
|
int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
|
|
{
|
|
int ret;
|
|
|
|
mfc_debug_enter();
|
|
s5p_mfc_clock_on();
|
|
s5p_mfc_clean_dev_int_flags(dev);
|
|
ret = s5p_mfc_hw_call(dev->mfc_cmds, sleep_cmd, dev);
|
|
if (ret) {
|
|
mfc_err("Failed to send command to MFC - timeout\n");
|
|
return ret;
|
|
}
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_SLEEP_RET)) {
|
|
mfc_err("Failed to sleep\n");
|
|
return -EIO;
|
|
}
|
|
s5p_mfc_clock_off();
|
|
dev->int_cond = 0;
|
|
if (dev->int_err != 0 || dev->int_type !=
|
|
S5P_MFC_R2H_CMD_SLEEP_RET) {
|
|
/* Failure. */
|
|
mfc_err("Failed to sleep - error: %d int: %d\n", dev->int_err,
|
|
dev->int_type);
|
|
return -EIO;
|
|
}
|
|
mfc_debug_leave();
|
|
return ret;
|
|
}
|
|
|
|
static int s5p_mfc_v8_wait_wakeup(struct s5p_mfc_dev *dev)
|
|
{
|
|
int ret;
|
|
|
|
/* Release reset signal to the RISC */
|
|
dev->risc_on = 1;
|
|
mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
|
|
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_FW_STATUS_RET)) {
|
|
mfc_err("Failed to reset MFCV8\n");
|
|
return -EIO;
|
|
}
|
|
mfc_debug(2, "Write command to wakeup MFCV8\n");
|
|
ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev);
|
|
if (ret) {
|
|
mfc_err("Failed to send command to MFCV8 - timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) {
|
|
mfc_err("Failed to wakeup MFC\n");
|
|
return -EIO;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int s5p_mfc_wait_wakeup(struct s5p_mfc_dev *dev)
|
|
{
|
|
int ret;
|
|
|
|
/* Send MFC wakeup command */
|
|
ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev);
|
|
if (ret) {
|
|
mfc_err("Failed to send command to MFC - timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Release reset signal to the RISC */
|
|
if (IS_MFCV6_PLUS(dev)) {
|
|
dev->risc_on = 1;
|
|
mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
|
|
} else {
|
|
mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
|
|
}
|
|
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) {
|
|
mfc_err("Failed to wakeup MFC\n");
|
|
return -EIO;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
|
|
{
|
|
int ret;
|
|
|
|
mfc_debug_enter();
|
|
/* 0. MFC reset */
|
|
mfc_debug(2, "MFC reset..\n");
|
|
s5p_mfc_clock_on();
|
|
dev->risc_on = 0;
|
|
ret = s5p_mfc_reset(dev);
|
|
if (ret) {
|
|
mfc_err("Failed to reset MFC - timeout\n");
|
|
s5p_mfc_clock_off();
|
|
return ret;
|
|
}
|
|
mfc_debug(2, "Done MFC reset..\n");
|
|
/* 1. Set DRAM base Addr */
|
|
s5p_mfc_init_memctrl(dev);
|
|
/* 2. Initialize registers of channel I/F */
|
|
s5p_mfc_clear_cmds(dev);
|
|
s5p_mfc_clean_dev_int_flags(dev);
|
|
/* 3. Send MFC wakeup command and wait for completion*/
|
|
if (IS_MFCV8_PLUS(dev))
|
|
ret = s5p_mfc_v8_wait_wakeup(dev);
|
|
else
|
|
ret = s5p_mfc_wait_wakeup(dev);
|
|
|
|
s5p_mfc_clock_off();
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev->int_cond = 0;
|
|
if (dev->int_err != 0 || dev->int_type !=
|
|
S5P_MFC_R2H_CMD_WAKEUP_RET) {
|
|
/* Failure. */
|
|
mfc_err("Failed to wakeup - error: %d int: %d\n", dev->int_err,
|
|
dev->int_type);
|
|
return -EIO;
|
|
}
|
|
mfc_debug_leave();
|
|
return 0;
|
|
}
|
|
|
|
int s5p_mfc_open_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = s5p_mfc_hw_call(dev->mfc_ops, alloc_instance_buffer, ctx);
|
|
if (ret) {
|
|
mfc_err("Failed allocating instance buffer\n");
|
|
goto err;
|
|
}
|
|
|
|
if (ctx->type == MFCINST_DECODER) {
|
|
ret = s5p_mfc_hw_call(dev->mfc_ops,
|
|
alloc_dec_temp_buffers, ctx);
|
|
if (ret) {
|
|
mfc_err("Failed allocating temporary buffers\n");
|
|
goto err_free_inst_buf;
|
|
}
|
|
}
|
|
|
|
set_work_bit_irqsave(ctx);
|
|
s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
|
|
if (s5p_mfc_wait_for_done_ctx(ctx,
|
|
S5P_MFC_R2H_CMD_OPEN_INSTANCE_RET, 0)) {
|
|
/* Error or timeout */
|
|
mfc_err("Error getting instance from hardware\n");
|
|
ret = -EIO;
|
|
goto err_free_desc_buf;
|
|
}
|
|
|
|
mfc_debug(2, "Got instance number: %d\n", ctx->inst_no);
|
|
return ret;
|
|
|
|
err_free_desc_buf:
|
|
if (ctx->type == MFCINST_DECODER)
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_dec_desc_buffer, ctx);
|
|
err_free_inst_buf:
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_instance_buffer, ctx);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
void s5p_mfc_close_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
|
|
{
|
|
ctx->state = MFCINST_RETURN_INST;
|
|
set_work_bit_irqsave(ctx);
|
|
s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
|
|
/* Wait until instance is returned or timeout occurred */
|
|
if (s5p_mfc_wait_for_done_ctx(ctx,
|
|
S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET, 0))
|
|
mfc_err("Err returning instance\n");
|
|
|
|
/* Free resources */
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_codec_buffers, ctx);
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_instance_buffer, ctx);
|
|
if (ctx->type == MFCINST_DECODER)
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_dec_desc_buffer, ctx);
|
|
|
|
ctx->inst_no = MFC_NO_INSTANCE_SET;
|
|
ctx->state = MFCINST_FREE;
|
|
}
|