forked from Minki/linux
4e50a8e3c5
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x298170): Section mismatch: reference to .init.text:sis900_mii_probe (between 'sis900_probe' and 'sis900_default_phy') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2504 lines
72 KiB
C
2504 lines
72 KiB
C
/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux.
|
|
Copyright 1999 Silicon Integrated System Corporation
|
|
Revision: 1.08.10 Apr. 2 2006
|
|
|
|
Modified from the driver which is originally written by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU General Public License (GPL), incorporated herein by reference.
|
|
Drivers based on this skeleton fall under the GPL and must retain
|
|
the authorship (implicit copyright) notice.
|
|
|
|
References:
|
|
SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support,
|
|
preliminary Rev. 1.0 Jan. 14, 1998
|
|
SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support,
|
|
preliminary Rev. 1.0 Nov. 10, 1998
|
|
SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
|
|
preliminary Rev. 1.0 Jan. 18, 1998
|
|
|
|
Rev 1.08.10 Apr. 2 2006 Daniele Venzano add vlan (jumbo packets) support
|
|
Rev 1.08.09 Sep. 19 2005 Daniele Venzano add Wake on LAN support
|
|
Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging messages
|
|
Rev 1.08.07 Nov. 2 2003 Daniele Venzano <venza@brownhat.org> add suspend/resume support
|
|
Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support
|
|
Rev 1.08.05 Jun. 6 2002 Mufasa Yang bug fix for read_eeprom & Tx descriptor over-boundary
|
|
Rev 1.08.04 Apr. 25 2002 Mufasa Yang <mufasa@sis.com.tw> added SiS962 support
|
|
Rev 1.08.03 Feb. 1 2002 Matt Domsch <Matt_Domsch@dell.com> update to use library crc32 function
|
|
Rev 1.08.02 Nov. 30 2001 Hui-Fen Hsu workaround for EDB & bug fix for dhcp problem
|
|
Rev 1.08.01 Aug. 25 2001 Hui-Fen Hsu update for 630ET & workaround for ICS1893 PHY
|
|
Rev 1.08.00 Jun. 11 2001 Hui-Fen Hsu workaround for RTL8201 PHY and some bug fix
|
|
Rev 1.07.11 Apr. 2 2001 Hui-Fen Hsu updates PCI drivers to use the new pci_set_dma_mask for kernel 2.4.3
|
|
Rev 1.07.10 Mar. 1 2001 Hui-Fen Hsu <hfhsu@sis.com.tw> some bug fix & 635M/B support
|
|
Rev 1.07.09 Feb. 9 2001 Dave Jones <davej@suse.de> PCI enable cleanup
|
|
Rev 1.07.08 Jan. 8 2001 Lei-Chun Chang added RTL8201 PHY support
|
|
Rev 1.07.07 Nov. 29 2000 Lei-Chun Chang added kernel-doc extractable documentation and 630 workaround fix
|
|
Rev 1.07.06 Nov. 7 2000 Jeff Garzik <jgarzik@pobox.com> some bug fix and cleaning
|
|
Rev 1.07.05 Nov. 6 2000 metapirat<metapirat@gmx.de> contribute media type select by ifconfig
|
|
Rev 1.07.04 Sep. 6 2000 Lei-Chun Chang added ICS1893 PHY support
|
|
Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E eqaulizer workaround rule
|
|
Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1
|
|
Rev 1.07 Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring
|
|
Rev 1.06.04 Feb. 11 2000 Jeff Garzik <jgarzik@pobox.com> softnet and init for kernel 2.4
|
|
Rev 1.06.03 Dec. 23 1999 Ollie Lho Third release
|
|
Rev 1.06.02 Nov. 23 1999 Ollie Lho bug in mac probing fixed
|
|
Rev 1.06.01 Nov. 16 1999 Ollie Lho CRC calculation provide by Joseph Zbiciak (im14u2c@primenet.com)
|
|
Rev 1.06 Nov. 4 1999 Ollie Lho (ollie@sis.com.tw) Second release
|
|
Rev 1.05.05 Oct. 29 1999 Ollie Lho (ollie@sis.com.tw) Single buffer Tx/Rx
|
|
Chin-Shan Li (lcs@sis.com.tw) Added AMD Am79c901 HomePNA PHY support
|
|
Rev 1.05 Aug. 7 1999 Jim Huang (cmhuang@sis.com.tw) Initial release
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/processor.h> /* Processor type for cache alignment. */
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h> /* User space memory access functions */
|
|
|
|
#include "sis900.h"
|
|
|
|
#define SIS900_MODULE_NAME "sis900"
|
|
#define SIS900_DRV_VERSION "v1.08.10 Apr. 2 2006"
|
|
|
|
static char version[] __devinitdata =
|
|
KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n";
|
|
|
|
static int max_interrupt_work = 40;
|
|
static int multicast_filter_limit = 128;
|
|
|
|
static int sis900_debug = -1; /* Use SIS900_DEF_MSG as value */
|
|
|
|
#define SIS900_DEF_MSG \
|
|
(NETIF_MSG_DRV | \
|
|
NETIF_MSG_LINK | \
|
|
NETIF_MSG_RX_ERR | \
|
|
NETIF_MSG_TX_ERR)
|
|
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (4*HZ)
|
|
|
|
enum {
|
|
SIS_900 = 0,
|
|
SIS_7016
|
|
};
|
|
static const char * card_names[] = {
|
|
"SiS 900 PCI Fast Ethernet",
|
|
"SiS 7016 PCI Fast Ethernet"
|
|
};
|
|
static struct pci_device_id sis900_pci_tbl [] = {
|
|
{PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_900,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_900},
|
|
{PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7016,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_7016},
|
|
{0,}
|
|
};
|
|
MODULE_DEVICE_TABLE (pci, sis900_pci_tbl);
|
|
|
|
static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex);
|
|
|
|
static const struct mii_chip_info {
|
|
const char * name;
|
|
u16 phy_id0;
|
|
u16 phy_id1;
|
|
u8 phy_types;
|
|
#define HOME 0x0001
|
|
#define LAN 0x0002
|
|
#define MIX 0x0003
|
|
#define UNKNOWN 0x0
|
|
} mii_chip_table[] = {
|
|
{ "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN },
|
|
{ "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN },
|
|
{ "SiS 900 on Foxconn 661 7MI", 0x0143, 0xBC70, LAN },
|
|
{ "Altimata AC101LF PHY", 0x0022, 0x5520, LAN },
|
|
{ "ADM 7001 LAN PHY", 0x002e, 0xcc60, LAN },
|
|
{ "AMD 79C901 10BASE-T PHY", 0x0000, 0x6B70, LAN },
|
|
{ "AMD 79C901 HomePNA PHY", 0x0000, 0x6B90, HOME},
|
|
{ "ICS LAN PHY", 0x0015, 0xF440, LAN },
|
|
{ "ICS LAN PHY", 0x0143, 0xBC70, LAN },
|
|
{ "NS 83851 PHY", 0x2000, 0x5C20, MIX },
|
|
{ "NS 83847 PHY", 0x2000, 0x5C30, MIX },
|
|
{ "Realtek RTL8201 PHY", 0x0000, 0x8200, LAN },
|
|
{ "VIA 6103 PHY", 0x0101, 0x8f20, LAN },
|
|
{NULL,},
|
|
};
|
|
|
|
struct mii_phy {
|
|
struct mii_phy * next;
|
|
int phy_addr;
|
|
u16 phy_id0;
|
|
u16 phy_id1;
|
|
u16 status;
|
|
u8 phy_types;
|
|
};
|
|
|
|
typedef struct _BufferDesc {
|
|
u32 link;
|
|
u32 cmdsts;
|
|
u32 bufptr;
|
|
} BufferDesc;
|
|
|
|
struct sis900_private {
|
|
struct net_device_stats stats;
|
|
struct pci_dev * pci_dev;
|
|
|
|
spinlock_t lock;
|
|
|
|
struct mii_phy * mii;
|
|
struct mii_phy * first_mii; /* record the first mii structure */
|
|
unsigned int cur_phy;
|
|
struct mii_if_info mii_info;
|
|
|
|
struct timer_list timer; /* Link status detection timer. */
|
|
u8 autong_complete; /* 1: auto-negotiate complete */
|
|
|
|
u32 msg_enable;
|
|
|
|
unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */
|
|
unsigned int cur_tx, dirty_tx;
|
|
|
|
/* The saved address of a sent/receive-in-place packet buffer */
|
|
struct sk_buff *tx_skbuff[NUM_TX_DESC];
|
|
struct sk_buff *rx_skbuff[NUM_RX_DESC];
|
|
BufferDesc *tx_ring;
|
|
BufferDesc *rx_ring;
|
|
|
|
dma_addr_t tx_ring_dma;
|
|
dma_addr_t rx_ring_dma;
|
|
|
|
unsigned int tx_full; /* The Tx queue is full. */
|
|
u8 host_bridge_rev;
|
|
u8 chipset_rev;
|
|
};
|
|
|
|
MODULE_AUTHOR("Jim Huang <cmhuang@sis.com.tw>, Ollie Lho <ollie@sis.com.tw>");
|
|
MODULE_DESCRIPTION("SiS 900 PCI Fast Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(multicast_filter_limit, int, 0444);
|
|
module_param(max_interrupt_work, int, 0444);
|
|
module_param(sis900_debug, int, 0444);
|
|
MODULE_PARM_DESC(multicast_filter_limit, "SiS 900/7016 maximum number of filtered multicast addresses");
|
|
MODULE_PARM_DESC(max_interrupt_work, "SiS 900/7016 maximum events handled per interrupt");
|
|
MODULE_PARM_DESC(sis900_debug, "SiS 900/7016 bitmapped debugging message level");
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void sis900_poll(struct net_device *dev);
|
|
#endif
|
|
static int sis900_open(struct net_device *net_dev);
|
|
static int sis900_mii_probe (struct net_device * net_dev);
|
|
static void sis900_init_rxfilter (struct net_device * net_dev);
|
|
static u16 read_eeprom(long ioaddr, int location);
|
|
static int mdio_read(struct net_device *net_dev, int phy_id, int location);
|
|
static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val);
|
|
static void sis900_timer(unsigned long data);
|
|
static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy);
|
|
static void sis900_tx_timeout(struct net_device *net_dev);
|
|
static void sis900_init_tx_ring(struct net_device *net_dev);
|
|
static void sis900_init_rx_ring(struct net_device *net_dev);
|
|
static int sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev);
|
|
static int sis900_rx(struct net_device *net_dev);
|
|
static void sis900_finish_xmit (struct net_device *net_dev);
|
|
static irqreturn_t sis900_interrupt(int irq, void *dev_instance);
|
|
static int sis900_close(struct net_device *net_dev);
|
|
static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd);
|
|
static struct net_device_stats *sis900_get_stats(struct net_device *net_dev);
|
|
static u16 sis900_mcast_bitnr(u8 *addr, u8 revision);
|
|
static void set_rx_mode(struct net_device *net_dev);
|
|
static void sis900_reset(struct net_device *net_dev);
|
|
static void sis630_set_eq(struct net_device *net_dev, u8 revision);
|
|
static int sis900_set_config(struct net_device *dev, struct ifmap *map);
|
|
static u16 sis900_default_phy(struct net_device * net_dev);
|
|
static void sis900_set_capability( struct net_device *net_dev ,struct mii_phy *phy);
|
|
static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr);
|
|
static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr);
|
|
static void sis900_set_mode (long ioaddr, int speed, int duplex);
|
|
static const struct ethtool_ops sis900_ethtool_ops;
|
|
|
|
/**
|
|
* sis900_get_mac_addr - Get MAC address for stand alone SiS900 model
|
|
* @pci_dev: the sis900 pci device
|
|
* @net_dev: the net device to get address for
|
|
*
|
|
* Older SiS900 and friends, use EEPROM to store MAC address.
|
|
* MAC address is read from read_eeprom() into @net_dev->dev_addr.
|
|
*/
|
|
|
|
static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev)
|
|
{
|
|
long ioaddr = pci_resource_start(pci_dev, 0);
|
|
u16 signature;
|
|
int i;
|
|
|
|
/* check to see if we have sane EEPROM */
|
|
signature = (u16) read_eeprom(ioaddr, EEPROMSignature);
|
|
if (signature == 0xffff || signature == 0x0000) {
|
|
printk (KERN_WARNING "%s: Error EERPOM read %x\n",
|
|
pci_name(pci_dev), signature);
|
|
return 0;
|
|
}
|
|
|
|
/* get MAC address from EEPROM */
|
|
for (i = 0; i < 3; i++)
|
|
((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* sis630e_get_mac_addr - Get MAC address for SiS630E model
|
|
* @pci_dev: the sis900 pci device
|
|
* @net_dev: the net device to get address for
|
|
*
|
|
* SiS630E model, use APC CMOS RAM to store MAC address.
|
|
* APC CMOS RAM is accessed through ISA bridge.
|
|
* MAC address is read into @net_dev->dev_addr.
|
|
*/
|
|
|
|
static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
|
|
struct net_device *net_dev)
|
|
{
|
|
struct pci_dev *isa_bridge = NULL;
|
|
u8 reg;
|
|
int i;
|
|
|
|
isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0008, isa_bridge);
|
|
if (!isa_bridge)
|
|
isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge);
|
|
if (!isa_bridge) {
|
|
printk(KERN_WARNING "%s: Can not find ISA bridge\n",
|
|
pci_name(pci_dev));
|
|
return 0;
|
|
}
|
|
pci_read_config_byte(isa_bridge, 0x48, ®);
|
|
pci_write_config_byte(isa_bridge, 0x48, reg | 0x40);
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
outb(0x09 + i, 0x70);
|
|
((u8 *)(net_dev->dev_addr))[i] = inb(0x71);
|
|
}
|
|
pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40);
|
|
pci_dev_put(isa_bridge);
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
/**
|
|
* sis635_get_mac_addr - Get MAC address for SIS635 model
|
|
* @pci_dev: the sis900 pci device
|
|
* @net_dev: the net device to get address for
|
|
*
|
|
* SiS635 model, set MAC Reload Bit to load Mac address from APC
|
|
* to rfdr. rfdr is accessed through rfcr. MAC address is read into
|
|
* @net_dev->dev_addr.
|
|
*/
|
|
|
|
static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
|
|
struct net_device *net_dev)
|
|
{
|
|
long ioaddr = net_dev->base_addr;
|
|
u32 rfcrSave;
|
|
u32 i;
|
|
|
|
rfcrSave = inl(rfcr + ioaddr);
|
|
|
|
outl(rfcrSave | RELOAD, ioaddr + cr);
|
|
outl(0, ioaddr + cr);
|
|
|
|
/* disable packet filtering before setting filter */
|
|
outl(rfcrSave & ~RFEN, rfcr + ioaddr);
|
|
|
|
/* load MAC addr to filter data register */
|
|
for (i = 0 ; i < 3 ; i++) {
|
|
outl((i << RFADDR_shift), ioaddr + rfcr);
|
|
*( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr);
|
|
}
|
|
|
|
/* enable packet filtering */
|
|
outl(rfcrSave | RFEN, rfcr + ioaddr);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* sis96x_get_mac_addr - Get MAC address for SiS962 or SiS963 model
|
|
* @pci_dev: the sis900 pci device
|
|
* @net_dev: the net device to get address for
|
|
*
|
|
* SiS962 or SiS963 model, use EEPROM to store MAC address. And EEPROM
|
|
* is shared by
|
|
* LAN and 1394. When access EEPROM, send EEREQ signal to hardware first
|
|
* and wait for EEGNT. If EEGNT is ON, EEPROM is permitted to be access
|
|
* by LAN, otherwise is not. After MAC address is read from EEPROM, send
|
|
* EEDONE signal to refuse EEPROM access by LAN.
|
|
* The EEPROM map of SiS962 or SiS963 is different to SiS900.
|
|
* The signature field in SiS962 or SiS963 spec is meaningless.
|
|
* MAC address is read into @net_dev->dev_addr.
|
|
*/
|
|
|
|
static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
|
|
struct net_device *net_dev)
|
|
{
|
|
long ioaddr = net_dev->base_addr;
|
|
long ee_addr = ioaddr + mear;
|
|
u32 waittime = 0;
|
|
int i;
|
|
|
|
outl(EEREQ, ee_addr);
|
|
while(waittime < 2000) {
|
|
if(inl(ee_addr) & EEGNT) {
|
|
|
|
/* get MAC address from EEPROM */
|
|
for (i = 0; i < 3; i++)
|
|
((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
|
|
|
|
outl(EEDONE, ee_addr);
|
|
return 1;
|
|
} else {
|
|
udelay(1);
|
|
waittime ++;
|
|
}
|
|
}
|
|
outl(EEDONE, ee_addr);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sis900_probe - Probe for sis900 device
|
|
* @pci_dev: the sis900 pci device
|
|
* @pci_id: the pci device ID
|
|
*
|
|
* Check and probe sis900 net device for @pci_dev.
|
|
* Get mac address according to the chip revision,
|
|
* and assign SiS900-specific entries in the device structure.
|
|
* ie: sis900_open(), sis900_start_xmit(), sis900_close(), etc.
|
|
*/
|
|
|
|
static int __devinit sis900_probe(struct pci_dev *pci_dev,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
struct sis900_private *sis_priv;
|
|
struct net_device *net_dev;
|
|
struct pci_dev *dev;
|
|
dma_addr_t ring_dma;
|
|
void *ring_space;
|
|
long ioaddr;
|
|
int i, ret;
|
|
const char *card_name = card_names[pci_id->driver_data];
|
|
const char *dev_name = pci_name(pci_dev);
|
|
|
|
/* when built into the kernel, we only print version if device is found */
|
|
#ifndef MODULE
|
|
static int printed_version;
|
|
if (!printed_version++)
|
|
printk(version);
|
|
#endif
|
|
|
|
/* setup various bits in PCI command register */
|
|
ret = pci_enable_device(pci_dev);
|
|
if(ret) return ret;
|
|
|
|
i = pci_set_dma_mask(pci_dev, DMA_32BIT_MASK);
|
|
if(i){
|
|
printk(KERN_ERR "sis900.c: architecture does not support"
|
|
"32bit PCI busmaster DMA\n");
|
|
return i;
|
|
}
|
|
|
|
pci_set_master(pci_dev);
|
|
|
|
net_dev = alloc_etherdev(sizeof(struct sis900_private));
|
|
if (!net_dev)
|
|
return -ENOMEM;
|
|
SET_MODULE_OWNER(net_dev);
|
|
SET_NETDEV_DEV(net_dev, &pci_dev->dev);
|
|
|
|
/* We do a request_region() to register /proc/ioports info. */
|
|
ioaddr = pci_resource_start(pci_dev, 0);
|
|
ret = pci_request_regions(pci_dev, "sis900");
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
sis_priv = net_dev->priv;
|
|
net_dev->base_addr = ioaddr;
|
|
net_dev->irq = pci_dev->irq;
|
|
sis_priv->pci_dev = pci_dev;
|
|
spin_lock_init(&sis_priv->lock);
|
|
|
|
pci_set_drvdata(pci_dev, net_dev);
|
|
|
|
ring_space = pci_alloc_consistent(pci_dev, TX_TOTAL_SIZE, &ring_dma);
|
|
if (!ring_space) {
|
|
ret = -ENOMEM;
|
|
goto err_out_cleardev;
|
|
}
|
|
sis_priv->tx_ring = (BufferDesc *)ring_space;
|
|
sis_priv->tx_ring_dma = ring_dma;
|
|
|
|
ring_space = pci_alloc_consistent(pci_dev, RX_TOTAL_SIZE, &ring_dma);
|
|
if (!ring_space) {
|
|
ret = -ENOMEM;
|
|
goto err_unmap_tx;
|
|
}
|
|
sis_priv->rx_ring = (BufferDesc *)ring_space;
|
|
sis_priv->rx_ring_dma = ring_dma;
|
|
|
|
/* The SiS900-specific entries in the device structure. */
|
|
net_dev->open = &sis900_open;
|
|
net_dev->hard_start_xmit = &sis900_start_xmit;
|
|
net_dev->stop = &sis900_close;
|
|
net_dev->get_stats = &sis900_get_stats;
|
|
net_dev->set_config = &sis900_set_config;
|
|
net_dev->set_multicast_list = &set_rx_mode;
|
|
net_dev->do_ioctl = &mii_ioctl;
|
|
net_dev->tx_timeout = sis900_tx_timeout;
|
|
net_dev->watchdog_timeo = TX_TIMEOUT;
|
|
net_dev->ethtool_ops = &sis900_ethtool_ops;
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
net_dev->poll_controller = &sis900_poll;
|
|
#endif
|
|
|
|
if (sis900_debug > 0)
|
|
sis_priv->msg_enable = sis900_debug;
|
|
else
|
|
sis_priv->msg_enable = SIS900_DEF_MSG;
|
|
|
|
sis_priv->mii_info.dev = net_dev;
|
|
sis_priv->mii_info.mdio_read = mdio_read;
|
|
sis_priv->mii_info.mdio_write = mdio_write;
|
|
sis_priv->mii_info.phy_id_mask = 0x1f;
|
|
sis_priv->mii_info.reg_num_mask = 0x1f;
|
|
|
|
/* Get Mac address according to the chip revision */
|
|
pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &(sis_priv->chipset_rev));
|
|
if(netif_msg_probe(sis_priv))
|
|
printk(KERN_DEBUG "%s: detected revision %2.2x, "
|
|
"trying to get MAC address...\n",
|
|
dev_name, sis_priv->chipset_rev);
|
|
|
|
ret = 0;
|
|
if (sis_priv->chipset_rev == SIS630E_900_REV)
|
|
ret = sis630e_get_mac_addr(pci_dev, net_dev);
|
|
else if ((sis_priv->chipset_rev > 0x81) && (sis_priv->chipset_rev <= 0x90) )
|
|
ret = sis635_get_mac_addr(pci_dev, net_dev);
|
|
else if (sis_priv->chipset_rev == SIS96x_900_REV)
|
|
ret = sis96x_get_mac_addr(pci_dev, net_dev);
|
|
else
|
|
ret = sis900_get_mac_addr(pci_dev, net_dev);
|
|
|
|
if (ret == 0) {
|
|
printk(KERN_WARNING "%s: Cannot read MAC address.\n", dev_name);
|
|
ret = -ENODEV;
|
|
goto err_unmap_rx;
|
|
}
|
|
|
|
/* 630ET : set the mii access mode as software-mode */
|
|
if (sis_priv->chipset_rev == SIS630ET_900_REV)
|
|
outl(ACCESSMODE | inl(ioaddr + cr), ioaddr + cr);
|
|
|
|
/* probe for mii transceiver */
|
|
if (sis900_mii_probe(net_dev) == 0) {
|
|
printk(KERN_WARNING "%s: Error probing MII device.\n",
|
|
dev_name);
|
|
ret = -ENODEV;
|
|
goto err_unmap_rx;
|
|
}
|
|
|
|
/* save our host bridge revision */
|
|
dev = pci_get_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL);
|
|
if (dev) {
|
|
pci_read_config_byte(dev, PCI_CLASS_REVISION, &sis_priv->host_bridge_rev);
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
ret = register_netdev(net_dev);
|
|
if (ret)
|
|
goto err_unmap_rx;
|
|
|
|
/* print some information about our NIC */
|
|
printk(KERN_INFO "%s: %s at %#lx, IRQ %d, ", net_dev->name,
|
|
card_name, ioaddr, net_dev->irq);
|
|
for (i = 0; i < 5; i++)
|
|
printk("%2.2x:", (u8)net_dev->dev_addr[i]);
|
|
printk("%2.2x.\n", net_dev->dev_addr[i]);
|
|
|
|
/* Detect Wake on Lan support */
|
|
ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
|
|
if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
|
|
printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
|
|
|
|
return 0;
|
|
|
|
err_unmap_rx:
|
|
pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring,
|
|
sis_priv->rx_ring_dma);
|
|
err_unmap_tx:
|
|
pci_free_consistent(pci_dev, TX_TOTAL_SIZE, sis_priv->tx_ring,
|
|
sis_priv->tx_ring_dma);
|
|
err_out_cleardev:
|
|
pci_set_drvdata(pci_dev, NULL);
|
|
pci_release_regions(pci_dev);
|
|
err_out:
|
|
free_netdev(net_dev);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* sis900_mii_probe - Probe MII PHY for sis900
|
|
* @net_dev: the net device to probe for
|
|
*
|
|
* Search for total of 32 possible mii phy addresses.
|
|
* Identify and set current phy if found one,
|
|
* return error if it failed to found.
|
|
*/
|
|
|
|
static int __devinit sis900_mii_probe(struct net_device * net_dev)
|
|
{
|
|
struct sis900_private * sis_priv = net_dev->priv;
|
|
const char *dev_name = pci_name(sis_priv->pci_dev);
|
|
u16 poll_bit = MII_STAT_LINK, status = 0;
|
|
unsigned long timeout = jiffies + 5 * HZ;
|
|
int phy_addr;
|
|
|
|
sis_priv->mii = NULL;
|
|
|
|
/* search for total of 32 possible mii phy addresses */
|
|
for (phy_addr = 0; phy_addr < 32; phy_addr++) {
|
|
struct mii_phy * mii_phy = NULL;
|
|
u16 mii_status;
|
|
int i;
|
|
|
|
mii_phy = NULL;
|
|
for(i = 0; i < 2; i++)
|
|
mii_status = mdio_read(net_dev, phy_addr, MII_STATUS);
|
|
|
|
if (mii_status == 0xffff || mii_status == 0x0000) {
|
|
if (netif_msg_probe(sis_priv))
|
|
printk(KERN_DEBUG "%s: MII at address %d"
|
|
" not accessible\n",
|
|
dev_name, phy_addr);
|
|
continue;
|
|
}
|
|
|
|
if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) == NULL) {
|
|
printk(KERN_WARNING "Cannot allocate mem for struct mii_phy\n");
|
|
mii_phy = sis_priv->first_mii;
|
|
while (mii_phy) {
|
|
struct mii_phy *phy;
|
|
phy = mii_phy;
|
|
mii_phy = mii_phy->next;
|
|
kfree(phy);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
mii_phy->phy_id0 = mdio_read(net_dev, phy_addr, MII_PHY_ID0);
|
|
mii_phy->phy_id1 = mdio_read(net_dev, phy_addr, MII_PHY_ID1);
|
|
mii_phy->phy_addr = phy_addr;
|
|
mii_phy->status = mii_status;
|
|
mii_phy->next = sis_priv->mii;
|
|
sis_priv->mii = mii_phy;
|
|
sis_priv->first_mii = mii_phy;
|
|
|
|
for (i = 0; mii_chip_table[i].phy_id1; i++)
|
|
if ((mii_phy->phy_id0 == mii_chip_table[i].phy_id0 ) &&
|
|
((mii_phy->phy_id1 & 0xFFF0) == mii_chip_table[i].phy_id1)){
|
|
mii_phy->phy_types = mii_chip_table[i].phy_types;
|
|
if (mii_chip_table[i].phy_types == MIX)
|
|
mii_phy->phy_types =
|
|
(mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME;
|
|
printk(KERN_INFO "%s: %s transceiver found "
|
|
"at address %d.\n",
|
|
dev_name,
|
|
mii_chip_table[i].name,
|
|
phy_addr);
|
|
break;
|
|
}
|
|
|
|
if( !mii_chip_table[i].phy_id1 ) {
|
|
printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n",
|
|
dev_name, phy_addr);
|
|
mii_phy->phy_types = UNKNOWN;
|
|
}
|
|
}
|
|
|
|
if (sis_priv->mii == NULL) {
|
|
printk(KERN_INFO "%s: No MII transceivers found!\n", dev_name);
|
|
return 0;
|
|
}
|
|
|
|
/* select default PHY for mac */
|
|
sis_priv->mii = NULL;
|
|
sis900_default_phy( net_dev );
|
|
|
|
/* Reset phy if default phy is internal sis900 */
|
|
if ((sis_priv->mii->phy_id0 == 0x001D) &&
|
|
((sis_priv->mii->phy_id1&0xFFF0) == 0x8000))
|
|
status = sis900_reset_phy(net_dev, sis_priv->cur_phy);
|
|
|
|
/* workaround for ICS1893 PHY */
|
|
if ((sis_priv->mii->phy_id0 == 0x0015) &&
|
|
((sis_priv->mii->phy_id1&0xFFF0) == 0xF440))
|
|
mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200);
|
|
|
|
if(status & MII_STAT_LINK){
|
|
while (poll_bit) {
|
|
yield();
|
|
|
|
poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit);
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
printk(KERN_WARNING "%s: reset phy and link down now\n",
|
|
dev_name);
|
|
return -ETIME;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (sis_priv->chipset_rev == SIS630E_900_REV) {
|
|
/* SiS 630E has some bugs on default value of PHY registers */
|
|
mdio_write(net_dev, sis_priv->cur_phy, MII_ANADV, 0x05e1);
|
|
mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG1, 0x22);
|
|
mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG2, 0xff00);
|
|
mdio_write(net_dev, sis_priv->cur_phy, MII_MASK, 0xffc0);
|
|
//mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, 0x1000);
|
|
}
|
|
|
|
if (sis_priv->mii->status & MII_STAT_LINK)
|
|
netif_carrier_on(net_dev);
|
|
else
|
|
netif_carrier_off(net_dev);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* sis900_default_phy - Select default PHY for sis900 mac.
|
|
* @net_dev: the net device to probe for
|
|
*
|
|
* Select first detected PHY with link as default.
|
|
* If no one is link on, select PHY whose types is HOME as default.
|
|
* If HOME doesn't exist, select LAN.
|
|
*/
|
|
|
|
static u16 sis900_default_phy(struct net_device * net_dev)
|
|
{
|
|
struct sis900_private * sis_priv = net_dev->priv;
|
|
struct mii_phy *phy = NULL, *phy_home = NULL,
|
|
*default_phy = NULL, *phy_lan = NULL;
|
|
u16 status;
|
|
|
|
for (phy=sis_priv->first_mii; phy; phy=phy->next) {
|
|
status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
|
|
status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
|
|
|
|
/* Link ON & Not select default PHY & not ghost PHY */
|
|
if ((status & MII_STAT_LINK) && !default_phy &&
|
|
(phy->phy_types != UNKNOWN))
|
|
default_phy = phy;
|
|
else {
|
|
status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL);
|
|
mdio_write(net_dev, phy->phy_addr, MII_CONTROL,
|
|
status | MII_CNTL_AUTO | MII_CNTL_ISOLATE);
|
|
if (phy->phy_types == HOME)
|
|
phy_home = phy;
|
|
else if(phy->phy_types == LAN)
|
|
phy_lan = phy;
|
|
}
|
|
}
|
|
|
|
if (!default_phy && phy_home)
|
|
default_phy = phy_home;
|
|
else if (!default_phy && phy_lan)
|
|
default_phy = phy_lan;
|
|
else if (!default_phy)
|
|
default_phy = sis_priv->first_mii;
|
|
|
|
if (sis_priv->mii != default_phy) {
|
|
sis_priv->mii = default_phy;
|
|
sis_priv->cur_phy = default_phy->phy_addr;
|
|
printk(KERN_INFO "%s: Using transceiver found at address %d as default\n",
|
|
pci_name(sis_priv->pci_dev), sis_priv->cur_phy);
|
|
}
|
|
|
|
sis_priv->mii_info.phy_id = sis_priv->cur_phy;
|
|
|
|
status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL);
|
|
status &= (~MII_CNTL_ISOLATE);
|
|
|
|
mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, status);
|
|
status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
|
|
status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
/**
|
|
* sis900_set_capability - set the media capability of network adapter.
|
|
* @net_dev : the net device to probe for
|
|
* @phy : default PHY
|
|
*
|
|
* Set the media capability of network adapter according to
|
|
* mii status register. It's necessary before auto-negotiate.
|
|
*/
|
|
|
|
static void sis900_set_capability(struct net_device *net_dev, struct mii_phy *phy)
|
|
{
|
|
u16 cap;
|
|
u16 status;
|
|
|
|
status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
|
|
status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
|
|
|
|
cap = MII_NWAY_CSMA_CD |
|
|
((phy->status & MII_STAT_CAN_TX_FDX)? MII_NWAY_TX_FDX:0) |
|
|
((phy->status & MII_STAT_CAN_TX) ? MII_NWAY_TX:0) |
|
|
((phy->status & MII_STAT_CAN_T_FDX) ? MII_NWAY_T_FDX:0)|
|
|
((phy->status & MII_STAT_CAN_T) ? MII_NWAY_T:0);
|
|
|
|
mdio_write(net_dev, phy->phy_addr, MII_ANADV, cap);
|
|
}
|
|
|
|
|
|
/* Delay between EEPROM clock transitions. */
|
|
#define eeprom_delay() inl(ee_addr)
|
|
|
|
/**
|
|
* read_eeprom - Read Serial EEPROM
|
|
* @ioaddr: base i/o address
|
|
* @location: the EEPROM location to read
|
|
*
|
|
* Read Serial EEPROM through EEPROM Access Register.
|
|
* Note that location is in word (16 bits) unit
|
|
*/
|
|
|
|
static u16 __devinit read_eeprom(long ioaddr, int location)
|
|
{
|
|
int i;
|
|
u16 retval = 0;
|
|
long ee_addr = ioaddr + mear;
|
|
u32 read_cmd = location | EEread;
|
|
|
|
outl(0, ee_addr);
|
|
eeprom_delay();
|
|
outl(EECS, ee_addr);
|
|
eeprom_delay();
|
|
|
|
/* Shift the read command (9) bits out. */
|
|
for (i = 8; i >= 0; i--) {
|
|
u32 dataval = (read_cmd & (1 << i)) ? EEDI | EECS : EECS;
|
|
outl(dataval, ee_addr);
|
|
eeprom_delay();
|
|
outl(dataval | EECLK, ee_addr);
|
|
eeprom_delay();
|
|
}
|
|
outl(EECS, ee_addr);
|
|
eeprom_delay();
|
|
|
|
/* read the 16-bits data in */
|
|
for (i = 16; i > 0; i--) {
|
|
outl(EECS, ee_addr);
|
|
eeprom_delay();
|
|
outl(EECS | EECLK, ee_addr);
|
|
eeprom_delay();
|
|
retval = (retval << 1) | ((inl(ee_addr) & EEDO) ? 1 : 0);
|
|
eeprom_delay();
|
|
}
|
|
|
|
/* Terminate the EEPROM access. */
|
|
outl(0, ee_addr);
|
|
eeprom_delay();
|
|
|
|
return (retval);
|
|
}
|
|
|
|
/* Read and write the MII management registers using software-generated
|
|
serial MDIO protocol. Note that the command bits and data bits are
|
|
send out separately */
|
|
#define mdio_delay() inl(mdio_addr)
|
|
|
|
static void mdio_idle(long mdio_addr)
|
|
{
|
|
outl(MDIO | MDDIR, mdio_addr);
|
|
mdio_delay();
|
|
outl(MDIO | MDDIR | MDC, mdio_addr);
|
|
}
|
|
|
|
/* Syncronize the MII management interface by shifting 32 one bits out. */
|
|
static void mdio_reset(long mdio_addr)
|
|
{
|
|
int i;
|
|
|
|
for (i = 31; i >= 0; i--) {
|
|
outl(MDDIR | MDIO, mdio_addr);
|
|
mdio_delay();
|
|
outl(MDDIR | MDIO | MDC, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* mdio_read - read MII PHY register
|
|
* @net_dev: the net device to read
|
|
* @phy_id: the phy address to read
|
|
* @location: the phy regiester id to read
|
|
*
|
|
* Read MII registers through MDIO and MDC
|
|
* using MDIO management frame structure and protocol(defined by ISO/IEC).
|
|
* Please see SiS7014 or ICS spec
|
|
*/
|
|
|
|
static int mdio_read(struct net_device *net_dev, int phy_id, int location)
|
|
{
|
|
long mdio_addr = net_dev->base_addr + mear;
|
|
int mii_cmd = MIIread|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
|
|
u16 retval = 0;
|
|
int i;
|
|
|
|
mdio_reset(mdio_addr);
|
|
mdio_idle(mdio_addr);
|
|
|
|
for (i = 15; i >= 0; i--) {
|
|
int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR;
|
|
outl(dataval, mdio_addr);
|
|
mdio_delay();
|
|
outl(dataval | MDC, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
|
|
/* Read the 16 data bits. */
|
|
for (i = 16; i > 0; i--) {
|
|
outl(0, mdio_addr);
|
|
mdio_delay();
|
|
retval = (retval << 1) | ((inl(mdio_addr) & MDIO) ? 1 : 0);
|
|
outl(MDC, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
outl(0x00, mdio_addr);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* mdio_write - write MII PHY register
|
|
* @net_dev: the net device to write
|
|
* @phy_id: the phy address to write
|
|
* @location: the phy regiester id to write
|
|
* @value: the register value to write with
|
|
*
|
|
* Write MII registers with @value through MDIO and MDC
|
|
* using MDIO management frame structure and protocol(defined by ISO/IEC)
|
|
* please see SiS7014 or ICS spec
|
|
*/
|
|
|
|
static void mdio_write(struct net_device *net_dev, int phy_id, int location,
|
|
int value)
|
|
{
|
|
long mdio_addr = net_dev->base_addr + mear;
|
|
int mii_cmd = MIIwrite|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
|
|
int i;
|
|
|
|
mdio_reset(mdio_addr);
|
|
mdio_idle(mdio_addr);
|
|
|
|
/* Shift the command bits out. */
|
|
for (i = 15; i >= 0; i--) {
|
|
int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR;
|
|
outb(dataval, mdio_addr);
|
|
mdio_delay();
|
|
outb(dataval | MDC, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
mdio_delay();
|
|
|
|
/* Shift the value bits out. */
|
|
for (i = 15; i >= 0; i--) {
|
|
int dataval = (value & (1 << i)) ? MDDIR | MDIO : MDDIR;
|
|
outl(dataval, mdio_addr);
|
|
mdio_delay();
|
|
outl(dataval | MDC, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
mdio_delay();
|
|
|
|
/* Clear out extra bits. */
|
|
for (i = 2; i > 0; i--) {
|
|
outb(0, mdio_addr);
|
|
mdio_delay();
|
|
outb(MDC, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
outl(0x00, mdio_addr);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/**
|
|
* sis900_reset_phy - reset sis900 mii phy.
|
|
* @net_dev: the net device to write
|
|
* @phy_addr: default phy address
|
|
*
|
|
* Some specific phy can't work properly without reset.
|
|
* This function will be called during initialization and
|
|
* link status change from ON to DOWN.
|
|
*/
|
|
|
|
static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr)
|
|
{
|
|
int i;
|
|
u16 status;
|
|
|
|
for (i = 0; i < 2; i++)
|
|
status = mdio_read(net_dev, phy_addr, MII_STATUS);
|
|
|
|
mdio_write( net_dev, phy_addr, MII_CONTROL, MII_CNTL_RESET );
|
|
|
|
return status;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/*
|
|
* Polling 'interrupt' - used by things like netconsole to send skbs
|
|
* without having to re-enable interrupts. It's not called while
|
|
* the interrupt routine is executing.
|
|
*/
|
|
static void sis900_poll(struct net_device *dev)
|
|
{
|
|
disable_irq(dev->irq);
|
|
sis900_interrupt(dev->irq, dev);
|
|
enable_irq(dev->irq);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* sis900_open - open sis900 device
|
|
* @net_dev: the net device to open
|
|
*
|
|
* Do some initialization and start net interface.
|
|
* enable interrupts and set sis900 timer.
|
|
*/
|
|
|
|
static int
|
|
sis900_open(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
int ret;
|
|
|
|
/* Soft reset the chip. */
|
|
sis900_reset(net_dev);
|
|
|
|
/* Equalizer workaround Rule */
|
|
sis630_set_eq(net_dev, sis_priv->chipset_rev);
|
|
|
|
ret = request_irq(net_dev->irq, &sis900_interrupt, IRQF_SHARED,
|
|
net_dev->name, net_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sis900_init_rxfilter(net_dev);
|
|
|
|
sis900_init_tx_ring(net_dev);
|
|
sis900_init_rx_ring(net_dev);
|
|
|
|
set_rx_mode(net_dev);
|
|
|
|
netif_start_queue(net_dev);
|
|
|
|
/* Workaround for EDB */
|
|
sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
|
|
|
|
/* Enable all known interrupts by setting the interrupt mask. */
|
|
outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr);
|
|
outl(RxENA | inl(ioaddr + cr), ioaddr + cr);
|
|
outl(IE, ioaddr + ier);
|
|
|
|
sis900_check_mode(net_dev, sis_priv->mii);
|
|
|
|
/* Set the timer to switch to check for link beat and perhaps switch
|
|
to an alternate media type. */
|
|
init_timer(&sis_priv->timer);
|
|
sis_priv->timer.expires = jiffies + HZ;
|
|
sis_priv->timer.data = (unsigned long)net_dev;
|
|
sis_priv->timer.function = &sis900_timer;
|
|
add_timer(&sis_priv->timer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sis900_init_rxfilter - Initialize the Rx filter
|
|
* @net_dev: the net device to initialize for
|
|
*
|
|
* Set receive filter address to our MAC address
|
|
* and enable packet filtering.
|
|
*/
|
|
|
|
static void
|
|
sis900_init_rxfilter (struct net_device * net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
u32 rfcrSave;
|
|
u32 i;
|
|
|
|
rfcrSave = inl(rfcr + ioaddr);
|
|
|
|
/* disable packet filtering before setting filter */
|
|
outl(rfcrSave & ~RFEN, rfcr + ioaddr);
|
|
|
|
/* load MAC addr to filter data register */
|
|
for (i = 0 ; i < 3 ; i++) {
|
|
u32 w;
|
|
|
|
w = (u32) *((u16 *)(net_dev->dev_addr)+i);
|
|
outl((i << RFADDR_shift), ioaddr + rfcr);
|
|
outl(w, ioaddr + rfdr);
|
|
|
|
if (netif_msg_hw(sis_priv)) {
|
|
printk(KERN_DEBUG "%s: Receive Filter Addrss[%d]=%x\n",
|
|
net_dev->name, i, inl(ioaddr + rfdr));
|
|
}
|
|
}
|
|
|
|
/* enable packet filtering */
|
|
outl(rfcrSave | RFEN, rfcr + ioaddr);
|
|
}
|
|
|
|
/**
|
|
* sis900_init_tx_ring - Initialize the Tx descriptor ring
|
|
* @net_dev: the net device to initialize for
|
|
*
|
|
* Initialize the Tx descriptor ring,
|
|
*/
|
|
|
|
static void
|
|
sis900_init_tx_ring(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
int i;
|
|
|
|
sis_priv->tx_full = 0;
|
|
sis_priv->dirty_tx = sis_priv->cur_tx = 0;
|
|
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
sis_priv->tx_skbuff[i] = NULL;
|
|
|
|
sis_priv->tx_ring[i].link = sis_priv->tx_ring_dma +
|
|
((i+1)%NUM_TX_DESC)*sizeof(BufferDesc);
|
|
sis_priv->tx_ring[i].cmdsts = 0;
|
|
sis_priv->tx_ring[i].bufptr = 0;
|
|
}
|
|
|
|
/* load Transmit Descriptor Register */
|
|
outl(sis_priv->tx_ring_dma, ioaddr + txdp);
|
|
if (netif_msg_hw(sis_priv))
|
|
printk(KERN_DEBUG "%s: TX descriptor register loaded with: %8.8x\n",
|
|
net_dev->name, inl(ioaddr + txdp));
|
|
}
|
|
|
|
/**
|
|
* sis900_init_rx_ring - Initialize the Rx descriptor ring
|
|
* @net_dev: the net device to initialize for
|
|
*
|
|
* Initialize the Rx descriptor ring,
|
|
* and pre-allocate recevie buffers (socket buffer)
|
|
*/
|
|
|
|
static void
|
|
sis900_init_rx_ring(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
int i;
|
|
|
|
sis_priv->cur_rx = 0;
|
|
sis_priv->dirty_rx = 0;
|
|
|
|
/* init RX descriptor */
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
sis_priv->rx_skbuff[i] = NULL;
|
|
|
|
sis_priv->rx_ring[i].link = sis_priv->rx_ring_dma +
|
|
((i+1)%NUM_RX_DESC)*sizeof(BufferDesc);
|
|
sis_priv->rx_ring[i].cmdsts = 0;
|
|
sis_priv->rx_ring[i].bufptr = 0;
|
|
}
|
|
|
|
/* allocate sock buffers */
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
struct sk_buff *skb;
|
|
|
|
if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
|
|
/* not enough memory for skbuff, this makes a "hole"
|
|
on the buffer ring, it is not clear how the
|
|
hardware will react to this kind of degenerated
|
|
buffer */
|
|
break;
|
|
}
|
|
sis_priv->rx_skbuff[i] = skb;
|
|
sis_priv->rx_ring[i].cmdsts = RX_BUF_SIZE;
|
|
sis_priv->rx_ring[i].bufptr = pci_map_single(sis_priv->pci_dev,
|
|
skb->data, RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
|
|
}
|
|
sis_priv->dirty_rx = (unsigned int) (i - NUM_RX_DESC);
|
|
|
|
/* load Receive Descriptor Register */
|
|
outl(sis_priv->rx_ring_dma, ioaddr + rxdp);
|
|
if (netif_msg_hw(sis_priv))
|
|
printk(KERN_DEBUG "%s: RX descriptor register loaded with: %8.8x\n",
|
|
net_dev->name, inl(ioaddr + rxdp));
|
|
}
|
|
|
|
/**
|
|
* sis630_set_eq - set phy equalizer value for 630 LAN
|
|
* @net_dev: the net device to set equalizer value
|
|
* @revision: 630 LAN revision number
|
|
*
|
|
* 630E equalizer workaround rule(Cyrus Huang 08/15)
|
|
* PHY register 14h(Test)
|
|
* Bit 14: 0 -- Automatically dectect (default)
|
|
* 1 -- Manually set Equalizer filter
|
|
* Bit 13: 0 -- (Default)
|
|
* 1 -- Speed up convergence of equalizer setting
|
|
* Bit 9 : 0 -- (Default)
|
|
* 1 -- Disable Baseline Wander
|
|
* Bit 3~7 -- Equalizer filter setting
|
|
* Link ON: Set Bit 9, 13 to 1, Bit 14 to 0
|
|
* Then calculate equalizer value
|
|
* Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0
|
|
* Link Off:Set Bit 13 to 1, Bit 14 to 0
|
|
* Calculate Equalizer value:
|
|
* When Link is ON and Bit 14 is 0, SIS900PHY will auto-dectect proper equalizer value.
|
|
* When the equalizer is stable, this value is not a fixed value. It will be within
|
|
* a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9)
|
|
* 0 <= max <= 4 --> set equalizer to max
|
|
* 5 <= max <= 14 --> set equalizer to max+1 or set equalizer to max+2 if max == min
|
|
* max >= 15 --> set equalizer to max+5 or set equalizer to max+6 if max == min
|
|
*/
|
|
|
|
static void sis630_set_eq(struct net_device *net_dev, u8 revision)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
u16 reg14h, eq_value=0, max_value=0, min_value=0;
|
|
int i, maxcount=10;
|
|
|
|
if ( !(revision == SIS630E_900_REV || revision == SIS630EA1_900_REV ||
|
|
revision == SIS630A_900_REV || revision == SIS630ET_900_REV) )
|
|
return;
|
|
|
|
if (netif_carrier_ok(net_dev)) {
|
|
reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
|
|
mdio_write(net_dev, sis_priv->cur_phy, MII_RESV,
|
|
(0x2200 | reg14h) & 0xBFFF);
|
|
for (i=0; i < maxcount; i++) {
|
|
eq_value = (0x00F8 & mdio_read(net_dev,
|
|
sis_priv->cur_phy, MII_RESV)) >> 3;
|
|
if (i == 0)
|
|
max_value=min_value=eq_value;
|
|
max_value = (eq_value > max_value) ?
|
|
eq_value : max_value;
|
|
min_value = (eq_value < min_value) ?
|
|
eq_value : min_value;
|
|
}
|
|
/* 630E rule to determine the equalizer value */
|
|
if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV ||
|
|
revision == SIS630ET_900_REV) {
|
|
if (max_value < 5)
|
|
eq_value = max_value;
|
|
else if (max_value >= 5 && max_value < 15)
|
|
eq_value = (max_value == min_value) ?
|
|
max_value+2 : max_value+1;
|
|
else if (max_value >= 15)
|
|
eq_value=(max_value == min_value) ?
|
|
max_value+6 : max_value+5;
|
|
}
|
|
/* 630B0&B1 rule to determine the equalizer value */
|
|
if (revision == SIS630A_900_REV &&
|
|
(sis_priv->host_bridge_rev == SIS630B0 ||
|
|
sis_priv->host_bridge_rev == SIS630B1)) {
|
|
if (max_value == 0)
|
|
eq_value = 3;
|
|
else
|
|
eq_value = (max_value + min_value + 1)/2;
|
|
}
|
|
/* write equalizer value and setting */
|
|
reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
|
|
reg14h = (reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8);
|
|
reg14h = (reg14h | 0x6000) & 0xFDFF;
|
|
mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, reg14h);
|
|
} else {
|
|
reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
|
|
if (revision == SIS630A_900_REV &&
|
|
(sis_priv->host_bridge_rev == SIS630B0 ||
|
|
sis_priv->host_bridge_rev == SIS630B1))
|
|
mdio_write(net_dev, sis_priv->cur_phy, MII_RESV,
|
|
(reg14h | 0x2200) & 0xBFFF);
|
|
else
|
|
mdio_write(net_dev, sis_priv->cur_phy, MII_RESV,
|
|
(reg14h | 0x2000) & 0xBFFF);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* sis900_timer - sis900 timer routine
|
|
* @data: pointer to sis900 net device
|
|
*
|
|
* On each timer ticks we check two things,
|
|
* link status (ON/OFF) and link mode (10/100/Full/Half)
|
|
*/
|
|
|
|
static void sis900_timer(unsigned long data)
|
|
{
|
|
struct net_device *net_dev = (struct net_device *)data;
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
struct mii_phy *mii_phy = sis_priv->mii;
|
|
static const int next_tick = 5*HZ;
|
|
u16 status;
|
|
|
|
if (!sis_priv->autong_complete){
|
|
int speed, duplex = 0;
|
|
|
|
sis900_read_mode(net_dev, &speed, &duplex);
|
|
if (duplex){
|
|
sis900_set_mode(net_dev->base_addr, speed, duplex);
|
|
sis630_set_eq(net_dev, sis_priv->chipset_rev);
|
|
netif_start_queue(net_dev);
|
|
}
|
|
|
|
sis_priv->timer.expires = jiffies + HZ;
|
|
add_timer(&sis_priv->timer);
|
|
return;
|
|
}
|
|
|
|
status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
|
|
status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
|
|
|
|
/* Link OFF -> ON */
|
|
if (!netif_carrier_ok(net_dev)) {
|
|
LookForLink:
|
|
/* Search for new PHY */
|
|
status = sis900_default_phy(net_dev);
|
|
mii_phy = sis_priv->mii;
|
|
|
|
if (status & MII_STAT_LINK){
|
|
sis900_check_mode(net_dev, mii_phy);
|
|
netif_carrier_on(net_dev);
|
|
}
|
|
} else {
|
|
/* Link ON -> OFF */
|
|
if (!(status & MII_STAT_LINK)){
|
|
netif_carrier_off(net_dev);
|
|
if(netif_msg_link(sis_priv))
|
|
printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
|
|
|
|
/* Change mode issue */
|
|
if ((mii_phy->phy_id0 == 0x001D) &&
|
|
((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
|
|
sis900_reset_phy(net_dev, sis_priv->cur_phy);
|
|
|
|
sis630_set_eq(net_dev, sis_priv->chipset_rev);
|
|
|
|
goto LookForLink;
|
|
}
|
|
}
|
|
|
|
sis_priv->timer.expires = jiffies + next_tick;
|
|
add_timer(&sis_priv->timer);
|
|
}
|
|
|
|
/**
|
|
* sis900_check_mode - check the media mode for sis900
|
|
* @net_dev: the net device to be checked
|
|
* @mii_phy: the mii phy
|
|
*
|
|
* Older driver gets the media mode from mii status output
|
|
* register. Now we set our media capability and auto-negotiate
|
|
* to get the upper bound of speed and duplex between two ends.
|
|
* If the types of mii phy is HOME, it doesn't need to auto-negotiate
|
|
* and autong_complete should be set to 1.
|
|
*/
|
|
|
|
static void sis900_check_mode(struct net_device *net_dev, struct mii_phy *mii_phy)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
int speed, duplex;
|
|
|
|
if (mii_phy->phy_types == LAN) {
|
|
outl(~EXD & inl(ioaddr + cfg), ioaddr + cfg);
|
|
sis900_set_capability(net_dev , mii_phy);
|
|
sis900_auto_negotiate(net_dev, sis_priv->cur_phy);
|
|
} else {
|
|
outl(EXD | inl(ioaddr + cfg), ioaddr + cfg);
|
|
speed = HW_SPEED_HOME;
|
|
duplex = FDX_CAPABLE_HALF_SELECTED;
|
|
sis900_set_mode(ioaddr, speed, duplex);
|
|
sis_priv->autong_complete = 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sis900_set_mode - Set the media mode of mac register.
|
|
* @ioaddr: the address of the device
|
|
* @speed : the transmit speed to be determined
|
|
* @duplex: the duplex mode to be determined
|
|
*
|
|
* Set the media mode of mac register txcfg/rxcfg according to
|
|
* speed and duplex of phy. Bit EDB_MASTER_EN indicates the EDB
|
|
* bus is used instead of PCI bus. When this bit is set 1, the
|
|
* Max DMA Burst Size for TX/RX DMA should be no larger than 16
|
|
* double words.
|
|
*/
|
|
|
|
static void sis900_set_mode (long ioaddr, int speed, int duplex)
|
|
{
|
|
u32 tx_flags = 0, rx_flags = 0;
|
|
|
|
if (inl(ioaddr + cfg) & EDB_MASTER_EN) {
|
|
tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) |
|
|
(TX_FILL_THRESH << TxFILLT_shift);
|
|
rx_flags = DMA_BURST_64 << RxMXDMA_shift;
|
|
} else {
|
|
tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) |
|
|
(TX_FILL_THRESH << TxFILLT_shift);
|
|
rx_flags = DMA_BURST_512 << RxMXDMA_shift;
|
|
}
|
|
|
|
if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS) {
|
|
rx_flags |= (RxDRNT_10 << RxDRNT_shift);
|
|
tx_flags |= (TxDRNT_10 << TxDRNT_shift);
|
|
} else {
|
|
rx_flags |= (RxDRNT_100 << RxDRNT_shift);
|
|
tx_flags |= (TxDRNT_100 << TxDRNT_shift);
|
|
}
|
|
|
|
if (duplex == FDX_CAPABLE_FULL_SELECTED) {
|
|
tx_flags |= (TxCSI | TxHBI);
|
|
rx_flags |= RxATX;
|
|
}
|
|
|
|
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
|
|
/* Can accept Jumbo packet */
|
|
rx_flags |= RxAJAB;
|
|
#endif
|
|
|
|
outl (tx_flags, ioaddr + txcfg);
|
|
outl (rx_flags, ioaddr + rxcfg);
|
|
}
|
|
|
|
/**
|
|
* sis900_auto_negotiate - Set the Auto-Negotiation Enable/Reset bit.
|
|
* @net_dev: the net device to read mode for
|
|
* @phy_addr: mii phy address
|
|
*
|
|
* If the adapter is link-on, set the auto-negotiate enable/reset bit.
|
|
* autong_complete should be set to 0 when starting auto-negotiation.
|
|
* autong_complete should be set to 1 if we didn't start auto-negotiation.
|
|
* sis900_timer will wait for link on again if autong_complete = 0.
|
|
*/
|
|
|
|
static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
int i = 0;
|
|
u32 status;
|
|
|
|
for (i = 0; i < 2; i++)
|
|
status = mdio_read(net_dev, phy_addr, MII_STATUS);
|
|
|
|
if (!(status & MII_STAT_LINK)){
|
|
if(netif_msg_link(sis_priv))
|
|
printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
|
|
sis_priv->autong_complete = 1;
|
|
netif_carrier_off(net_dev);
|
|
return;
|
|
}
|
|
|
|
/* (Re)start AutoNegotiate */
|
|
mdio_write(net_dev, phy_addr, MII_CONTROL,
|
|
MII_CNTL_AUTO | MII_CNTL_RST_AUTO);
|
|
sis_priv->autong_complete = 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* sis900_read_mode - read media mode for sis900 internal phy
|
|
* @net_dev: the net device to read mode for
|
|
* @speed : the transmit speed to be determined
|
|
* @duplex : the duplex mode to be determined
|
|
*
|
|
* The capability of remote end will be put in mii register autorec
|
|
* after auto-negotiation. Use AND operation to get the upper bound
|
|
* of speed and duplex between two ends.
|
|
*/
|
|
|
|
static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
struct mii_phy *phy = sis_priv->mii;
|
|
int phy_addr = sis_priv->cur_phy;
|
|
u32 status;
|
|
u16 autoadv, autorec;
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++)
|
|
status = mdio_read(net_dev, phy_addr, MII_STATUS);
|
|
|
|
if (!(status & MII_STAT_LINK))
|
|
return;
|
|
|
|
/* AutoNegotiate completed */
|
|
autoadv = mdio_read(net_dev, phy_addr, MII_ANADV);
|
|
autorec = mdio_read(net_dev, phy_addr, MII_ANLPAR);
|
|
status = autoadv & autorec;
|
|
|
|
*speed = HW_SPEED_10_MBPS;
|
|
*duplex = FDX_CAPABLE_HALF_SELECTED;
|
|
|
|
if (status & (MII_NWAY_TX | MII_NWAY_TX_FDX))
|
|
*speed = HW_SPEED_100_MBPS;
|
|
if (status & ( MII_NWAY_TX_FDX | MII_NWAY_T_FDX))
|
|
*duplex = FDX_CAPABLE_FULL_SELECTED;
|
|
|
|
sis_priv->autong_complete = 1;
|
|
|
|
/* Workaround for Realtek RTL8201 PHY issue */
|
|
if ((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)) {
|
|
if (mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX)
|
|
*duplex = FDX_CAPABLE_FULL_SELECTED;
|
|
if (mdio_read(net_dev, phy_addr, 0x0019) & 0x01)
|
|
*speed = HW_SPEED_100_MBPS;
|
|
}
|
|
|
|
if(netif_msg_link(sis_priv))
|
|
printk(KERN_INFO "%s: Media Link On %s %s-duplex \n",
|
|
net_dev->name,
|
|
*speed == HW_SPEED_100_MBPS ?
|
|
"100mbps" : "10mbps",
|
|
*duplex == FDX_CAPABLE_FULL_SELECTED ?
|
|
"full" : "half");
|
|
}
|
|
|
|
/**
|
|
* sis900_tx_timeout - sis900 transmit timeout routine
|
|
* @net_dev: the net device to transmit
|
|
*
|
|
* print transmit timeout status
|
|
* disable interrupts and do some tasks
|
|
*/
|
|
|
|
static void sis900_tx_timeout(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
if(netif_msg_tx_err(sis_priv))
|
|
printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x \n",
|
|
net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr));
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
outl(0x0000, ioaddr + imr);
|
|
|
|
/* use spinlock to prevent interrupt handler accessing buffer ring */
|
|
spin_lock_irqsave(&sis_priv->lock, flags);
|
|
|
|
/* discard unsent packets */
|
|
sis_priv->dirty_tx = sis_priv->cur_tx = 0;
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
struct sk_buff *skb = sis_priv->tx_skbuff[i];
|
|
|
|
if (skb) {
|
|
pci_unmap_single(sis_priv->pci_dev,
|
|
sis_priv->tx_ring[i].bufptr, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_irq(skb);
|
|
sis_priv->tx_skbuff[i] = NULL;
|
|
sis_priv->tx_ring[i].cmdsts = 0;
|
|
sis_priv->tx_ring[i].bufptr = 0;
|
|
sis_priv->stats.tx_dropped++;
|
|
}
|
|
}
|
|
sis_priv->tx_full = 0;
|
|
netif_wake_queue(net_dev);
|
|
|
|
spin_unlock_irqrestore(&sis_priv->lock, flags);
|
|
|
|
net_dev->trans_start = jiffies;
|
|
|
|
/* load Transmit Descriptor Register */
|
|
outl(sis_priv->tx_ring_dma, ioaddr + txdp);
|
|
|
|
/* Enable all known interrupts by setting the interrupt mask. */
|
|
outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr);
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* sis900_start_xmit - sis900 start transmit routine
|
|
* @skb: socket buffer pointer to put the data being transmitted
|
|
* @net_dev: the net device to transmit with
|
|
*
|
|
* Set the transmit buffer descriptor,
|
|
* and write TxENA to enable transmit state machine.
|
|
* tell upper layer if the buffer is full
|
|
*/
|
|
|
|
static int
|
|
sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
unsigned int entry;
|
|
unsigned long flags;
|
|
unsigned int index_cur_tx, index_dirty_tx;
|
|
unsigned int count_dirty_tx;
|
|
|
|
/* Don't transmit data before the complete of auto-negotiation */
|
|
if(!sis_priv->autong_complete){
|
|
netif_stop_queue(net_dev);
|
|
return 1;
|
|
}
|
|
|
|
spin_lock_irqsave(&sis_priv->lock, flags);
|
|
|
|
/* Calculate the next Tx descriptor entry. */
|
|
entry = sis_priv->cur_tx % NUM_TX_DESC;
|
|
sis_priv->tx_skbuff[entry] = skb;
|
|
|
|
/* set the transmit buffer descriptor and enable Transmit State Machine */
|
|
sis_priv->tx_ring[entry].bufptr = pci_map_single(sis_priv->pci_dev,
|
|
skb->data, skb->len, PCI_DMA_TODEVICE);
|
|
sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len);
|
|
outl(TxENA | inl(ioaddr + cr), ioaddr + cr);
|
|
|
|
sis_priv->cur_tx ++;
|
|
index_cur_tx = sis_priv->cur_tx;
|
|
index_dirty_tx = sis_priv->dirty_tx;
|
|
|
|
for (count_dirty_tx = 0; index_cur_tx != index_dirty_tx; index_dirty_tx++)
|
|
count_dirty_tx ++;
|
|
|
|
if (index_cur_tx == index_dirty_tx) {
|
|
/* dirty_tx is met in the cycle of cur_tx, buffer full */
|
|
sis_priv->tx_full = 1;
|
|
netif_stop_queue(net_dev);
|
|
} else if (count_dirty_tx < NUM_TX_DESC) {
|
|
/* Typical path, tell upper layer that more transmission is possible */
|
|
netif_start_queue(net_dev);
|
|
} else {
|
|
/* buffer full, tell upper layer no more transmission */
|
|
sis_priv->tx_full = 1;
|
|
netif_stop_queue(net_dev);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&sis_priv->lock, flags);
|
|
|
|
net_dev->trans_start = jiffies;
|
|
|
|
if (netif_msg_tx_queued(sis_priv))
|
|
printk(KERN_DEBUG "%s: Queued Tx packet at %p size %d "
|
|
"to slot %d.\n",
|
|
net_dev->name, skb->data, (int)skb->len, entry);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sis900_interrupt - sis900 interrupt handler
|
|
* @irq: the irq number
|
|
* @dev_instance: the client data object
|
|
* @regs: snapshot of processor context
|
|
*
|
|
* The interrupt handler does all of the Rx thread work,
|
|
* and cleans up after the Tx thread
|
|
*/
|
|
|
|
static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct net_device *net_dev = dev_instance;
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
int boguscnt = max_interrupt_work;
|
|
long ioaddr = net_dev->base_addr;
|
|
u32 status;
|
|
unsigned int handled = 0;
|
|
|
|
spin_lock (&sis_priv->lock);
|
|
|
|
do {
|
|
status = inl(ioaddr + isr);
|
|
|
|
if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
|
|
/* nothing intresting happened */
|
|
break;
|
|
handled = 1;
|
|
|
|
/* why dow't we break after Tx/Rx case ?? keyword: full-duplex */
|
|
if (status & (RxORN | RxERR | RxOK))
|
|
/* Rx interrupt */
|
|
sis900_rx(net_dev);
|
|
|
|
if (status & (TxURN | TxERR | TxIDLE))
|
|
/* Tx interrupt */
|
|
sis900_finish_xmit(net_dev);
|
|
|
|
/* something strange happened !!! */
|
|
if (status & HIBERR) {
|
|
if(netif_msg_intr(sis_priv))
|
|
printk(KERN_INFO "%s: Abnormal interrupt,"
|
|
"status %#8.8x.\n", net_dev->name, status);
|
|
break;
|
|
}
|
|
if (--boguscnt < 0) {
|
|
if(netif_msg_intr(sis_priv))
|
|
printk(KERN_INFO "%s: Too much work at interrupt, "
|
|
"interrupt status = %#8.8x.\n",
|
|
net_dev->name, status);
|
|
break;
|
|
}
|
|
} while (1);
|
|
|
|
if(netif_msg_intr(sis_priv))
|
|
printk(KERN_DEBUG "%s: exiting interrupt, "
|
|
"interrupt status = 0x%#8.8x.\n",
|
|
net_dev->name, inl(ioaddr + isr));
|
|
|
|
spin_unlock (&sis_priv->lock);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/**
|
|
* sis900_rx - sis900 receive routine
|
|
* @net_dev: the net device which receives data
|
|
*
|
|
* Process receive interrupt events,
|
|
* put buffer to higher layer and refill buffer pool
|
|
* Note: This function is called by interrupt handler,
|
|
* don't do "too much" work here
|
|
*/
|
|
|
|
static int sis900_rx(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC;
|
|
u32 rx_status = sis_priv->rx_ring[entry].cmdsts;
|
|
int rx_work_limit;
|
|
|
|
if (netif_msg_rx_status(sis_priv))
|
|
printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
|
|
"status:0x%8.8x\n",
|
|
sis_priv->cur_rx, sis_priv->dirty_rx, rx_status);
|
|
rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx;
|
|
|
|
while (rx_status & OWN) {
|
|
unsigned int rx_size;
|
|
unsigned int data_size;
|
|
|
|
if (--rx_work_limit < 0)
|
|
break;
|
|
|
|
data_size = rx_status & DSIZE;
|
|
rx_size = data_size - CRC_SIZE;
|
|
|
|
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
|
|
/* ``TOOLONG'' flag means jumbo packet recived. */
|
|
if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE)
|
|
rx_status &= (~ ((unsigned int)TOOLONG));
|
|
#endif
|
|
|
|
if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) {
|
|
/* corrupted packet received */
|
|
if (netif_msg_rx_err(sis_priv))
|
|
printk(KERN_DEBUG "%s: Corrupted packet "
|
|
"received, buffer status = 0x%8.8x/%d.\n",
|
|
net_dev->name, rx_status, data_size);
|
|
sis_priv->stats.rx_errors++;
|
|
if (rx_status & OVERRUN)
|
|
sis_priv->stats.rx_over_errors++;
|
|
if (rx_status & (TOOLONG|RUNT))
|
|
sis_priv->stats.rx_length_errors++;
|
|
if (rx_status & (RXISERR | FAERR))
|
|
sis_priv->stats.rx_frame_errors++;
|
|
if (rx_status & CRCERR)
|
|
sis_priv->stats.rx_crc_errors++;
|
|
/* reset buffer descriptor state */
|
|
sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
|
|
} else {
|
|
struct sk_buff * skb;
|
|
struct sk_buff * rx_skb;
|
|
|
|
pci_unmap_single(sis_priv->pci_dev,
|
|
sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
/* refill the Rx buffer, what if there is not enought
|
|
* memory for new socket buffer ?? */
|
|
if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
|
|
/*
|
|
* Not enough memory to refill the buffer
|
|
* so we need to recycle the old one so
|
|
* as to avoid creating a memory hole
|
|
* in the rx ring
|
|
*/
|
|
skb = sis_priv->rx_skbuff[entry];
|
|
sis_priv->stats.rx_dropped++;
|
|
goto refill_rx_ring;
|
|
}
|
|
|
|
/* This situation should never happen, but due to
|
|
some unknow bugs, it is possible that
|
|
we are working on NULL sk_buff :-( */
|
|
if (sis_priv->rx_skbuff[entry] == NULL) {
|
|
if (netif_msg_rx_err(sis_priv))
|
|
printk(KERN_WARNING "%s: NULL pointer "
|
|
"encountered in Rx ring\n"
|
|
"cur_rx:%4.4d, dirty_rx:%4.4d\n",
|
|
net_dev->name, sis_priv->cur_rx,
|
|
sis_priv->dirty_rx);
|
|
break;
|
|
}
|
|
|
|
/* give the socket buffer to upper layers */
|
|
rx_skb = sis_priv->rx_skbuff[entry];
|
|
skb_put(rx_skb, rx_size);
|
|
rx_skb->protocol = eth_type_trans(rx_skb, net_dev);
|
|
netif_rx(rx_skb);
|
|
|
|
/* some network statistics */
|
|
if ((rx_status & BCAST) == MCAST)
|
|
sis_priv->stats.multicast++;
|
|
net_dev->last_rx = jiffies;
|
|
sis_priv->stats.rx_bytes += rx_size;
|
|
sis_priv->stats.rx_packets++;
|
|
sis_priv->dirty_rx++;
|
|
refill_rx_ring:
|
|
sis_priv->rx_skbuff[entry] = skb;
|
|
sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
|
|
sis_priv->rx_ring[entry].bufptr =
|
|
pci_map_single(sis_priv->pci_dev, skb->data,
|
|
RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
|
|
}
|
|
sis_priv->cur_rx++;
|
|
entry = sis_priv->cur_rx % NUM_RX_DESC;
|
|
rx_status = sis_priv->rx_ring[entry].cmdsts;
|
|
} // while
|
|
|
|
/* refill the Rx buffer, what if the rate of refilling is slower
|
|
* than consuming ?? */
|
|
for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) {
|
|
struct sk_buff *skb;
|
|
|
|
entry = sis_priv->dirty_rx % NUM_RX_DESC;
|
|
|
|
if (sis_priv->rx_skbuff[entry] == NULL) {
|
|
if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
|
|
/* not enough memory for skbuff, this makes a
|
|
* "hole" on the buffer ring, it is not clear
|
|
* how the hardware will react to this kind
|
|
* of degenerated buffer */
|
|
if (netif_msg_rx_err(sis_priv))
|
|
printk(KERN_INFO "%s: Memory squeeze,"
|
|
"deferring packet.\n",
|
|
net_dev->name);
|
|
sis_priv->stats.rx_dropped++;
|
|
break;
|
|
}
|
|
sis_priv->rx_skbuff[entry] = skb;
|
|
sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
|
|
sis_priv->rx_ring[entry].bufptr =
|
|
pci_map_single(sis_priv->pci_dev, skb->data,
|
|
RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
|
|
}
|
|
}
|
|
/* re-enable the potentially idle receive state matchine */
|
|
outl(RxENA | inl(ioaddr + cr), ioaddr + cr );
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sis900_finish_xmit - finish up transmission of packets
|
|
* @net_dev: the net device to be transmitted on
|
|
*
|
|
* Check for error condition and free socket buffer etc
|
|
* schedule for more transmission as needed
|
|
* Note: This function is called by interrupt handler,
|
|
* don't do "too much" work here
|
|
*/
|
|
|
|
static void sis900_finish_xmit (struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
|
|
for (; sis_priv->dirty_tx != sis_priv->cur_tx; sis_priv->dirty_tx++) {
|
|
struct sk_buff *skb;
|
|
unsigned int entry;
|
|
u32 tx_status;
|
|
|
|
entry = sis_priv->dirty_tx % NUM_TX_DESC;
|
|
tx_status = sis_priv->tx_ring[entry].cmdsts;
|
|
|
|
if (tx_status & OWN) {
|
|
/* The packet is not transmitted yet (owned by hardware) !
|
|
* Note: the interrupt is generated only when Tx Machine
|
|
* is idle, so this is an almost impossible case */
|
|
break;
|
|
}
|
|
|
|
if (tx_status & (ABORT | UNDERRUN | OWCOLL)) {
|
|
/* packet unsuccessfully transmitted */
|
|
if (netif_msg_tx_err(sis_priv))
|
|
printk(KERN_DEBUG "%s: Transmit "
|
|
"error, Tx status %8.8x.\n",
|
|
net_dev->name, tx_status);
|
|
sis_priv->stats.tx_errors++;
|
|
if (tx_status & UNDERRUN)
|
|
sis_priv->stats.tx_fifo_errors++;
|
|
if (tx_status & ABORT)
|
|
sis_priv->stats.tx_aborted_errors++;
|
|
if (tx_status & NOCARRIER)
|
|
sis_priv->stats.tx_carrier_errors++;
|
|
if (tx_status & OWCOLL)
|
|
sis_priv->stats.tx_window_errors++;
|
|
} else {
|
|
/* packet successfully transmitted */
|
|
sis_priv->stats.collisions += (tx_status & COLCNT) >> 16;
|
|
sis_priv->stats.tx_bytes += tx_status & DSIZE;
|
|
sis_priv->stats.tx_packets++;
|
|
}
|
|
/* Free the original skb. */
|
|
skb = sis_priv->tx_skbuff[entry];
|
|
pci_unmap_single(sis_priv->pci_dev,
|
|
sis_priv->tx_ring[entry].bufptr, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_irq(skb);
|
|
sis_priv->tx_skbuff[entry] = NULL;
|
|
sis_priv->tx_ring[entry].bufptr = 0;
|
|
sis_priv->tx_ring[entry].cmdsts = 0;
|
|
}
|
|
|
|
if (sis_priv->tx_full && netif_queue_stopped(net_dev) &&
|
|
sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC - 4) {
|
|
/* The ring is no longer full, clear tx_full and schedule
|
|
* more transmission by netif_wake_queue(net_dev) */
|
|
sis_priv->tx_full = 0;
|
|
netif_wake_queue (net_dev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sis900_close - close sis900 device
|
|
* @net_dev: the net device to be closed
|
|
*
|
|
* Disable interrupts, stop the Tx and Rx Status Machine
|
|
* free Tx and RX socket buffer
|
|
*/
|
|
|
|
static int sis900_close(struct net_device *net_dev)
|
|
{
|
|
long ioaddr = net_dev->base_addr;
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
netif_stop_queue(net_dev);
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
outl(0x0000, ioaddr + imr);
|
|
outl(0x0000, ioaddr + ier);
|
|
|
|
/* Stop the chip's Tx and Rx Status Machine */
|
|
outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr);
|
|
|
|
del_timer(&sis_priv->timer);
|
|
|
|
free_irq(net_dev->irq, net_dev);
|
|
|
|
/* Free Tx and RX skbuff */
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
skb = sis_priv->rx_skbuff[i];
|
|
if (skb) {
|
|
pci_unmap_single(sis_priv->pci_dev,
|
|
sis_priv->rx_ring[i].bufptr,
|
|
RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(skb);
|
|
sis_priv->rx_skbuff[i] = NULL;
|
|
}
|
|
}
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
skb = sis_priv->tx_skbuff[i];
|
|
if (skb) {
|
|
pci_unmap_single(sis_priv->pci_dev,
|
|
sis_priv->tx_ring[i].bufptr, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb(skb);
|
|
sis_priv->tx_skbuff[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Green! Put the chip in low-power mode. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sis900_get_drvinfo - Return information about driver
|
|
* @net_dev: the net device to probe
|
|
* @info: container for info returned
|
|
*
|
|
* Process ethtool command such as "ehtool -i" to show information
|
|
*/
|
|
|
|
static void sis900_get_drvinfo(struct net_device *net_dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
|
|
strcpy (info->driver, SIS900_MODULE_NAME);
|
|
strcpy (info->version, SIS900_DRV_VERSION);
|
|
strcpy (info->bus_info, pci_name(sis_priv->pci_dev));
|
|
}
|
|
|
|
static u32 sis900_get_msglevel(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
return sis_priv->msg_enable;
|
|
}
|
|
|
|
static void sis900_set_msglevel(struct net_device *net_dev, u32 value)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
sis_priv->msg_enable = value;
|
|
}
|
|
|
|
static u32 sis900_get_link(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
return mii_link_ok(&sis_priv->mii_info);
|
|
}
|
|
|
|
static int sis900_get_settings(struct net_device *net_dev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
spin_lock_irq(&sis_priv->lock);
|
|
mii_ethtool_gset(&sis_priv->mii_info, cmd);
|
|
spin_unlock_irq(&sis_priv->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int sis900_set_settings(struct net_device *net_dev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
int rt;
|
|
spin_lock_irq(&sis_priv->lock);
|
|
rt = mii_ethtool_sset(&sis_priv->mii_info, cmd);
|
|
spin_unlock_irq(&sis_priv->lock);
|
|
return rt;
|
|
}
|
|
|
|
static int sis900_nway_reset(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
return mii_nway_restart(&sis_priv->mii_info);
|
|
}
|
|
|
|
/**
|
|
* sis900_set_wol - Set up Wake on Lan registers
|
|
* @net_dev: the net device to probe
|
|
* @wol: container for info passed to the driver
|
|
*
|
|
* Process ethtool command "wol" to setup wake on lan features.
|
|
* SiS900 supports sending WoL events if a correct packet is received,
|
|
* but there is no simple way to filter them to only a subset (broadcast,
|
|
* multicast, unicast or arp).
|
|
*/
|
|
|
|
static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long pmctrl_addr = net_dev->base_addr + pmctrl;
|
|
u32 cfgpmcsr = 0, pmctrl_bits = 0;
|
|
|
|
if (wol->wolopts == 0) {
|
|
pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
|
|
cfgpmcsr &= ~PME_EN;
|
|
pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
|
|
outl(pmctrl_bits, pmctrl_addr);
|
|
if (netif_msg_wol(sis_priv))
|
|
printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name);
|
|
return 0;
|
|
}
|
|
|
|
if (wol->wolopts & (WAKE_MAGICSECURE | WAKE_UCAST | WAKE_MCAST
|
|
| WAKE_BCAST | WAKE_ARP))
|
|
return -EINVAL;
|
|
|
|
if (wol->wolopts & WAKE_MAGIC)
|
|
pmctrl_bits |= MAGICPKT;
|
|
if (wol->wolopts & WAKE_PHY)
|
|
pmctrl_bits |= LINKON;
|
|
|
|
outl(pmctrl_bits, pmctrl_addr);
|
|
|
|
pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
|
|
cfgpmcsr |= PME_EN;
|
|
pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
|
|
if (netif_msg_wol(sis_priv))
|
|
printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sis900_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
long pmctrl_addr = net_dev->base_addr + pmctrl;
|
|
u32 pmctrl_bits;
|
|
|
|
pmctrl_bits = inl(pmctrl_addr);
|
|
if (pmctrl_bits & MAGICPKT)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
if (pmctrl_bits & LINKON)
|
|
wol->wolopts |= WAKE_PHY;
|
|
|
|
wol->supported = (WAKE_PHY | WAKE_MAGIC);
|
|
}
|
|
|
|
static const struct ethtool_ops sis900_ethtool_ops = {
|
|
.get_drvinfo = sis900_get_drvinfo,
|
|
.get_msglevel = sis900_get_msglevel,
|
|
.set_msglevel = sis900_set_msglevel,
|
|
.get_link = sis900_get_link,
|
|
.get_settings = sis900_get_settings,
|
|
.set_settings = sis900_set_settings,
|
|
.nway_reset = sis900_nway_reset,
|
|
.get_wol = sis900_get_wol,
|
|
.set_wol = sis900_set_wol
|
|
};
|
|
|
|
/**
|
|
* mii_ioctl - process MII i/o control command
|
|
* @net_dev: the net device to command for
|
|
* @rq: parameter for command
|
|
* @cmd: the i/o command
|
|
*
|
|
* Process MII command like read/write MII register
|
|
*/
|
|
|
|
static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
struct mii_ioctl_data *data = if_mii(rq);
|
|
|
|
switch(cmd) {
|
|
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
|
|
data->phy_id = sis_priv->mii->phy_addr;
|
|
/* Fall Through */
|
|
|
|
case SIOCGMIIREG: /* Read MII PHY register. */
|
|
data->val_out = mdio_read(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
|
|
return 0;
|
|
|
|
case SIOCSMIIREG: /* Write MII PHY register. */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
mdio_write(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sis900_get_stats - Get sis900 read/write statistics
|
|
* @net_dev: the net device to get statistics for
|
|
*
|
|
* get tx/rx statistics for sis900
|
|
*/
|
|
|
|
static struct net_device_stats *
|
|
sis900_get_stats(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
|
|
return &sis_priv->stats;
|
|
}
|
|
|
|
/**
|
|
* sis900_set_config - Set media type by net_device.set_config
|
|
* @dev: the net device for media type change
|
|
* @map: ifmap passed by ifconfig
|
|
*
|
|
* Set media type to 10baseT, 100baseT or 0(for auto) by ifconfig
|
|
* we support only port changes. All other runtime configuration
|
|
* changes will be ignored
|
|
*/
|
|
|
|
static int sis900_set_config(struct net_device *dev, struct ifmap *map)
|
|
{
|
|
struct sis900_private *sis_priv = dev->priv;
|
|
struct mii_phy *mii_phy = sis_priv->mii;
|
|
|
|
u16 status;
|
|
|
|
if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
|
|
/* we switch on the ifmap->port field. I couldn't find anything
|
|
* like a definition or standard for the values of that field.
|
|
* I think the meaning of those values is device specific. But
|
|
* since I would like to change the media type via the ifconfig
|
|
* command I use the definition from linux/netdevice.h
|
|
* (which seems to be different from the ifport(pcmcia) definition) */
|
|
switch(map->port){
|
|
case IF_PORT_UNKNOWN: /* use auto here */
|
|
dev->if_port = map->port;
|
|
/* we are going to change the media type, so the Link
|
|
* will be temporary down and we need to reflect that
|
|
* here. When the Link comes up again, it will be
|
|
* sensed by the sis_timer procedure, which also does
|
|
* all the rest for us */
|
|
netif_carrier_off(dev);
|
|
|
|
/* read current state */
|
|
status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL);
|
|
|
|
/* enable auto negotiation and reset the negotioation
|
|
* (I don't really know what the auto negatiotiation
|
|
* reset really means, but it sounds for me right to
|
|
* do one here) */
|
|
mdio_write(dev, mii_phy->phy_addr,
|
|
MII_CONTROL, status | MII_CNTL_AUTO | MII_CNTL_RST_AUTO);
|
|
|
|
break;
|
|
|
|
case IF_PORT_10BASET: /* 10BaseT */
|
|
dev->if_port = map->port;
|
|
|
|
/* we are going to change the media type, so the Link
|
|
* will be temporary down and we need to reflect that
|
|
* here. When the Link comes up again, it will be
|
|
* sensed by the sis_timer procedure, which also does
|
|
* all the rest for us */
|
|
netif_carrier_off(dev);
|
|
|
|
/* set Speed to 10Mbps */
|
|
/* read current state */
|
|
status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL);
|
|
|
|
/* disable auto negotiation and force 10MBit mode*/
|
|
mdio_write(dev, mii_phy->phy_addr,
|
|
MII_CONTROL, status & ~(MII_CNTL_SPEED |
|
|
MII_CNTL_AUTO));
|
|
break;
|
|
|
|
case IF_PORT_100BASET: /* 100BaseT */
|
|
case IF_PORT_100BASETX: /* 100BaseTx */
|
|
dev->if_port = map->port;
|
|
|
|
/* we are going to change the media type, so the Link
|
|
* will be temporary down and we need to reflect that
|
|
* here. When the Link comes up again, it will be
|
|
* sensed by the sis_timer procedure, which also does
|
|
* all the rest for us */
|
|
netif_carrier_off(dev);
|
|
|
|
/* set Speed to 100Mbps */
|
|
/* disable auto negotiation and enable 100MBit Mode */
|
|
status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL);
|
|
mdio_write(dev, mii_phy->phy_addr,
|
|
MII_CONTROL, (status & ~MII_CNTL_SPEED) |
|
|
MII_CNTL_SPEED);
|
|
|
|
break;
|
|
|
|
case IF_PORT_10BASE2: /* 10Base2 */
|
|
case IF_PORT_AUI: /* AUI */
|
|
case IF_PORT_100BASEFX: /* 100BaseFx */
|
|
/* These Modes are not supported (are they?)*/
|
|
return -EOPNOTSUPP;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sis900_mcast_bitnr - compute hashtable index
|
|
* @addr: multicast address
|
|
* @revision: revision id of chip
|
|
*
|
|
* SiS 900 uses the most sigificant 7 bits to index a 128 bits multicast
|
|
* hash table, which makes this function a little bit different from other drivers
|
|
* SiS 900 B0 & 635 M/B uses the most significat 8 bits to index 256 bits
|
|
* multicast hash table.
|
|
*/
|
|
|
|
static inline u16 sis900_mcast_bitnr(u8 *addr, u8 revision)
|
|
{
|
|
|
|
u32 crc = ether_crc(6, addr);
|
|
|
|
/* leave 8 or 7 most siginifant bits */
|
|
if ((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV))
|
|
return ((int)(crc >> 24));
|
|
else
|
|
return ((int)(crc >> 25));
|
|
}
|
|
|
|
/**
|
|
* set_rx_mode - Set SiS900 receive mode
|
|
* @net_dev: the net device to be set
|
|
*
|
|
* Set SiS900 receive mode for promiscuous, multicast, or broadcast mode.
|
|
* And set the appropriate multicast filter.
|
|
* Multicast hash table changes from 128 to 256 bits for 635M/B & 900B0.
|
|
*/
|
|
|
|
static void set_rx_mode(struct net_device *net_dev)
|
|
{
|
|
long ioaddr = net_dev->base_addr;
|
|
struct sis900_private * sis_priv = net_dev->priv;
|
|
u16 mc_filter[16] = {0}; /* 256/128 bits multicast hash table */
|
|
int i, table_entries;
|
|
u32 rx_mode;
|
|
|
|
/* 635 Hash Table entries = 256(2^16) */
|
|
if((sis_priv->chipset_rev >= SIS635A_900_REV) ||
|
|
(sis_priv->chipset_rev == SIS900B_900_REV))
|
|
table_entries = 16;
|
|
else
|
|
table_entries = 8;
|
|
|
|
if (net_dev->flags & IFF_PROMISC) {
|
|
/* Accept any kinds of packets */
|
|
rx_mode = RFPromiscuous;
|
|
for (i = 0; i < table_entries; i++)
|
|
mc_filter[i] = 0xffff;
|
|
} else if ((net_dev->mc_count > multicast_filter_limit) ||
|
|
(net_dev->flags & IFF_ALLMULTI)) {
|
|
/* too many multicast addresses or accept all multicast packet */
|
|
rx_mode = RFAAB | RFAAM;
|
|
for (i = 0; i < table_entries; i++)
|
|
mc_filter[i] = 0xffff;
|
|
} else {
|
|
/* Accept Broadcast packet, destination address matchs our
|
|
* MAC address, use Receive Filter to reject unwanted MCAST
|
|
* packets */
|
|
struct dev_mc_list *mclist;
|
|
rx_mode = RFAAB;
|
|
for (i = 0, mclist = net_dev->mc_list;
|
|
mclist && i < net_dev->mc_count;
|
|
i++, mclist = mclist->next) {
|
|
unsigned int bit_nr =
|
|
sis900_mcast_bitnr(mclist->dmi_addr, sis_priv->chipset_rev);
|
|
mc_filter[bit_nr >> 4] |= (1 << (bit_nr & 0xf));
|
|
}
|
|
}
|
|
|
|
/* update Multicast Hash Table in Receive Filter */
|
|
for (i = 0; i < table_entries; i++) {
|
|
/* why plus 0x04 ??, That makes the correct value for hash table. */
|
|
outl((u32)(0x00000004+i) << RFADDR_shift, ioaddr + rfcr);
|
|
outl(mc_filter[i], ioaddr + rfdr);
|
|
}
|
|
|
|
outl(RFEN | rx_mode, ioaddr + rfcr);
|
|
|
|
/* sis900 is capable of looping back packets at MAC level for
|
|
* debugging purpose */
|
|
if (net_dev->flags & IFF_LOOPBACK) {
|
|
u32 cr_saved;
|
|
/* We must disable Tx/Rx before setting loopback mode */
|
|
cr_saved = inl(ioaddr + cr);
|
|
outl(cr_saved | TxDIS | RxDIS, ioaddr + cr);
|
|
/* enable loopback */
|
|
outl(inl(ioaddr + txcfg) | TxMLB, ioaddr + txcfg);
|
|
outl(inl(ioaddr + rxcfg) | RxATX, ioaddr + rxcfg);
|
|
/* restore cr */
|
|
outl(cr_saved, ioaddr + cr);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* sis900_reset - Reset sis900 MAC
|
|
* @net_dev: the net device to reset
|
|
*
|
|
* reset sis900 MAC and wait until finished
|
|
* reset through command register
|
|
* change backoff algorithm for 900B0 & 635 M/B
|
|
*/
|
|
|
|
static void sis900_reset(struct net_device *net_dev)
|
|
{
|
|
struct sis900_private * sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
int i = 0;
|
|
u32 status = TxRCMP | RxRCMP;
|
|
|
|
outl(0, ioaddr + ier);
|
|
outl(0, ioaddr + imr);
|
|
outl(0, ioaddr + rfcr);
|
|
|
|
outl(RxRESET | TxRESET | RESET | inl(ioaddr + cr), ioaddr + cr);
|
|
|
|
/* Check that the chip has finished the reset. */
|
|
while (status && (i++ < 1000)) {
|
|
status ^= (inl(isr + ioaddr) & status);
|
|
}
|
|
|
|
if( (sis_priv->chipset_rev >= SIS635A_900_REV) ||
|
|
(sis_priv->chipset_rev == SIS900B_900_REV) )
|
|
outl(PESEL | RND_CNT, ioaddr + cfg);
|
|
else
|
|
outl(PESEL, ioaddr + cfg);
|
|
}
|
|
|
|
/**
|
|
* sis900_remove - Remove sis900 device
|
|
* @pci_dev: the pci device to be removed
|
|
*
|
|
* remove and release SiS900 net device
|
|
*/
|
|
|
|
static void __devexit sis900_remove(struct pci_dev *pci_dev)
|
|
{
|
|
struct net_device *net_dev = pci_get_drvdata(pci_dev);
|
|
struct sis900_private * sis_priv = net_dev->priv;
|
|
struct mii_phy *phy = NULL;
|
|
|
|
while (sis_priv->first_mii) {
|
|
phy = sis_priv->first_mii;
|
|
sis_priv->first_mii = phy->next;
|
|
kfree(phy);
|
|
}
|
|
|
|
pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring,
|
|
sis_priv->rx_ring_dma);
|
|
pci_free_consistent(pci_dev, TX_TOTAL_SIZE, sis_priv->tx_ring,
|
|
sis_priv->tx_ring_dma);
|
|
unregister_netdev(net_dev);
|
|
free_netdev(net_dev);
|
|
pci_release_regions(pci_dev);
|
|
pci_set_drvdata(pci_dev, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int sis900_suspend(struct pci_dev *pci_dev, pm_message_t state)
|
|
{
|
|
struct net_device *net_dev = pci_get_drvdata(pci_dev);
|
|
long ioaddr = net_dev->base_addr;
|
|
|
|
if(!netif_running(net_dev))
|
|
return 0;
|
|
|
|
netif_stop_queue(net_dev);
|
|
netif_device_detach(net_dev);
|
|
|
|
/* Stop the chip's Tx and Rx Status Machine */
|
|
outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr);
|
|
|
|
pci_set_power_state(pci_dev, PCI_D3hot);
|
|
pci_save_state(pci_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sis900_resume(struct pci_dev *pci_dev)
|
|
{
|
|
struct net_device *net_dev = pci_get_drvdata(pci_dev);
|
|
struct sis900_private *sis_priv = net_dev->priv;
|
|
long ioaddr = net_dev->base_addr;
|
|
|
|
if(!netif_running(net_dev))
|
|
return 0;
|
|
pci_restore_state(pci_dev);
|
|
pci_set_power_state(pci_dev, PCI_D0);
|
|
|
|
sis900_init_rxfilter(net_dev);
|
|
|
|
sis900_init_tx_ring(net_dev);
|
|
sis900_init_rx_ring(net_dev);
|
|
|
|
set_rx_mode(net_dev);
|
|
|
|
netif_device_attach(net_dev);
|
|
netif_start_queue(net_dev);
|
|
|
|
/* Workaround for EDB */
|
|
sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
|
|
|
|
/* Enable all known interrupts by setting the interrupt mask. */
|
|
outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr);
|
|
outl(RxENA | inl(ioaddr + cr), ioaddr + cr);
|
|
outl(IE, ioaddr + ier);
|
|
|
|
sis900_check_mode(net_dev, sis_priv->mii);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct pci_driver sis900_pci_driver = {
|
|
.name = SIS900_MODULE_NAME,
|
|
.id_table = sis900_pci_tbl,
|
|
.probe = sis900_probe,
|
|
.remove = __devexit_p(sis900_remove),
|
|
#ifdef CONFIG_PM
|
|
.suspend = sis900_suspend,
|
|
.resume = sis900_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
static int __init sis900_init_module(void)
|
|
{
|
|
/* when a module, this is printed whether or not devices are found in probe */
|
|
#ifdef MODULE
|
|
printk(version);
|
|
#endif
|
|
|
|
return pci_register_driver(&sis900_pci_driver);
|
|
}
|
|
|
|
static void __exit sis900_cleanup_module(void)
|
|
{
|
|
pci_unregister_driver(&sis900_pci_driver);
|
|
}
|
|
|
|
module_init(sis900_init_module);
|
|
module_exit(sis900_cleanup_module);
|
|
|