forked from Minki/linux
5887c83647
Updates license to use SPDX-License-Identifier. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
723 lines
19 KiB
C
723 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* ADC driver for sunxi platforms' (A10, A13 and A31) GPADC
|
|
*
|
|
* Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons.com>
|
|
*
|
|
* The Allwinner SoCs all have an ADC that can also act as a touchscreen
|
|
* controller and a thermal sensor.
|
|
* The thermal sensor works only when the ADC acts as a touchscreen controller
|
|
* and is configured to throw an interrupt every fixed periods of time (let say
|
|
* every X seconds).
|
|
* One would be tempted to disable the IP on the hardware side rather than
|
|
* disabling interrupts to save some power but that resets the internal clock of
|
|
* the IP, resulting in having to wait X seconds every time we want to read the
|
|
* value of the thermal sensor.
|
|
* This is also the reason of using autosuspend in pm_runtime. If there was no
|
|
* autosuspend, the thermal sensor would need X seconds after every
|
|
* pm_runtime_get_sync to get a value from the ADC. The autosuspend allows the
|
|
* thermal sensor to be requested again in a certain time span before it gets
|
|
* shutdown for not being used.
|
|
*/
|
|
|
|
#include <linux/completion.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/thermal.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/driver.h>
|
|
#include <linux/iio/machine.h>
|
|
#include <linux/mfd/sun4i-gpadc.h>
|
|
|
|
static unsigned int sun4i_gpadc_chan_select(unsigned int chan)
|
|
{
|
|
return SUN4I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
|
|
}
|
|
|
|
static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
|
|
{
|
|
return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
|
|
}
|
|
|
|
struct gpadc_data {
|
|
int temp_offset;
|
|
int temp_scale;
|
|
unsigned int tp_mode_en;
|
|
unsigned int tp_adc_select;
|
|
unsigned int (*adc_chan_select)(unsigned int chan);
|
|
unsigned int adc_chan_mask;
|
|
};
|
|
|
|
static const struct gpadc_data sun4i_gpadc_data = {
|
|
.temp_offset = -1932,
|
|
.temp_scale = 133,
|
|
.tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN,
|
|
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
|
|
.adc_chan_select = &sun4i_gpadc_chan_select,
|
|
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
|
|
};
|
|
|
|
static const struct gpadc_data sun5i_gpadc_data = {
|
|
.temp_offset = -1447,
|
|
.temp_scale = 100,
|
|
.tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN,
|
|
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
|
|
.adc_chan_select = &sun4i_gpadc_chan_select,
|
|
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
|
|
};
|
|
|
|
static const struct gpadc_data sun6i_gpadc_data = {
|
|
.temp_offset = -1623,
|
|
.temp_scale = 167,
|
|
.tp_mode_en = SUN6I_GPADC_CTRL1_TP_MODE_EN,
|
|
.tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
|
|
.adc_chan_select = &sun6i_gpadc_chan_select,
|
|
.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
|
|
};
|
|
|
|
static const struct gpadc_data sun8i_a33_gpadc_data = {
|
|
.temp_offset = -1662,
|
|
.temp_scale = 162,
|
|
.tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
|
|
};
|
|
|
|
struct sun4i_gpadc_iio {
|
|
struct iio_dev *indio_dev;
|
|
struct completion completion;
|
|
int temp_data;
|
|
u32 adc_data;
|
|
struct regmap *regmap;
|
|
unsigned int fifo_data_irq;
|
|
atomic_t ignore_fifo_data_irq;
|
|
unsigned int temp_data_irq;
|
|
atomic_t ignore_temp_data_irq;
|
|
const struct gpadc_data *data;
|
|
bool no_irq;
|
|
/* prevents concurrent reads of temperature and ADC */
|
|
struct mutex mutex;
|
|
struct thermal_zone_device *tzd;
|
|
struct device *sensor_device;
|
|
};
|
|
|
|
#define SUN4I_GPADC_ADC_CHANNEL(_channel, _name) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = _channel, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.datasheet_name = _name, \
|
|
}
|
|
|
|
static struct iio_map sun4i_gpadc_hwmon_maps[] = {
|
|
{
|
|
.adc_channel_label = "temp_adc",
|
|
.consumer_dev_name = "iio_hwmon.0",
|
|
},
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
static const struct iio_chan_spec sun4i_gpadc_channels[] = {
|
|
SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"),
|
|
SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"),
|
|
SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"),
|
|
SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.datasheet_name = "temp_adc",
|
|
},
|
|
};
|
|
|
|
static const struct iio_chan_spec sun4i_gpadc_channels_no_temp[] = {
|
|
SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"),
|
|
SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"),
|
|
SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"),
|
|
SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
|
|
};
|
|
|
|
static const struct iio_chan_spec sun8i_a33_gpadc_channels[] = {
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.datasheet_name = "temp_adc",
|
|
},
|
|
};
|
|
|
|
static const struct regmap_config sun4i_gpadc_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.fast_io = true,
|
|
};
|
|
|
|
static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel,
|
|
unsigned int irq)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
|
|
int ret;
|
|
u32 reg;
|
|
|
|
pm_runtime_get_sync(indio_dev->dev.parent);
|
|
|
|
reinit_completion(&info->completion);
|
|
|
|
ret = regmap_write(info->regmap, SUN4I_GPADC_INT_FIFOC,
|
|
SUN4I_GPADC_INT_FIFOC_TP_FIFO_TRIG_LEVEL(1) |
|
|
SUN4I_GPADC_INT_FIFOC_TP_FIFO_FLUSH);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(info->regmap, SUN4I_GPADC_CTRL1, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (irq == info->fifo_data_irq) {
|
|
ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
|
|
info->data->tp_mode_en |
|
|
info->data->tp_adc_select |
|
|
info->data->adc_chan_select(channel));
|
|
/*
|
|
* When the IP changes channel, it needs a bit of time to get
|
|
* correct values.
|
|
*/
|
|
if ((reg & info->data->adc_chan_mask) !=
|
|
info->data->adc_chan_select(channel))
|
|
mdelay(10);
|
|
|
|
} else {
|
|
/*
|
|
* The temperature sensor returns valid data only when the ADC
|
|
* operates in touchscreen mode.
|
|
*/
|
|
ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
|
|
info->data->tp_mode_en);
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* When the IP changes mode between ADC or touchscreen, it
|
|
* needs a bit of time to get correct values.
|
|
*/
|
|
if ((reg & info->data->tp_adc_select) != info->data->tp_adc_select)
|
|
mdelay(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
|
|
unsigned int irq)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&info->mutex);
|
|
|
|
ret = sun4i_prepare_for_irq(indio_dev, channel, irq);
|
|
if (ret)
|
|
goto err;
|
|
|
|
enable_irq(irq);
|
|
|
|
/*
|
|
* The temperature sensor throws an interruption periodically (currently
|
|
* set at periods of ~0.6s in sun4i_gpadc_runtime_resume). A 1s delay
|
|
* makes sure an interruption occurs in normal conditions. If it doesn't
|
|
* occur, then there is a timeout.
|
|
*/
|
|
if (!wait_for_completion_timeout(&info->completion,
|
|
msecs_to_jiffies(1000))) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
if (irq == info->fifo_data_irq)
|
|
*val = info->adc_data;
|
|
else
|
|
*val = info->temp_data;
|
|
|
|
ret = 0;
|
|
pm_runtime_mark_last_busy(indio_dev->dev.parent);
|
|
|
|
err:
|
|
pm_runtime_put_autosuspend(indio_dev->dev.parent);
|
|
disable_irq(irq);
|
|
mutex_unlock(&info->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
|
|
int *val)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
|
|
|
|
return sun4i_gpadc_read(indio_dev, channel, val, info->fifo_data_irq);
|
|
}
|
|
|
|
static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
|
|
|
|
if (info->no_irq) {
|
|
pm_runtime_get_sync(indio_dev->dev.parent);
|
|
|
|
regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
|
|
|
|
pm_runtime_mark_last_busy(indio_dev->dev.parent);
|
|
pm_runtime_put_autosuspend(indio_dev->dev.parent);
|
|
|
|
return 0;
|
|
}
|
|
|
|
return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
|
|
}
|
|
|
|
static int sun4i_gpadc_temp_offset(struct iio_dev *indio_dev, int *val)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
|
|
|
|
*val = info->data->temp_offset;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_gpadc_temp_scale(struct iio_dev *indio_dev, int *val)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
|
|
|
|
*val = info->data->temp_scale;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_gpadc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
ret = sun4i_gpadc_temp_offset(indio_dev, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (chan->type == IIO_VOLTAGE)
|
|
ret = sun4i_gpadc_adc_read(indio_dev, chan->channel,
|
|
val);
|
|
else
|
|
ret = sun4i_gpadc_temp_read(indio_dev, val);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (chan->type == IIO_VOLTAGE) {
|
|
/* 3000mV / 4096 * raw */
|
|
*val = 0;
|
|
*val2 = 732421875;
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
}
|
|
|
|
ret = sun4i_gpadc_temp_scale(indio_dev, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info sun4i_gpadc_iio_info = {
|
|
.read_raw = sun4i_gpadc_read_raw,
|
|
};
|
|
|
|
static irqreturn_t sun4i_gpadc_temp_data_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct sun4i_gpadc_iio *info = dev_id;
|
|
|
|
if (atomic_read(&info->ignore_temp_data_irq))
|
|
goto out;
|
|
|
|
if (!regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, &info->temp_data))
|
|
complete(&info->completion);
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct sun4i_gpadc_iio *info = dev_id;
|
|
|
|
if (atomic_read(&info->ignore_fifo_data_irq))
|
|
goto out;
|
|
|
|
if (!regmap_read(info->regmap, SUN4I_GPADC_DATA, &info->adc_data))
|
|
complete(&info->completion);
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int sun4i_gpadc_runtime_suspend(struct device *dev)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
|
|
|
|
/* Disable the ADC on IP */
|
|
regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
|
|
/* Disable temperature sensor on IP */
|
|
regmap_write(info->regmap, SUN4I_GPADC_TPR, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_gpadc_runtime_resume(struct device *dev)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
|
|
|
|
/* clkin = 6MHz */
|
|
regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
|
|
SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
|
|
SUN4I_GPADC_CTRL0_FS_DIV(7) |
|
|
SUN4I_GPADC_CTRL0_T_ACQ(63));
|
|
regmap_write(info->regmap, SUN4I_GPADC_CTRL1, info->data->tp_mode_en);
|
|
regmap_write(info->regmap, SUN4I_GPADC_CTRL3,
|
|
SUN4I_GPADC_CTRL3_FILTER_EN |
|
|
SUN4I_GPADC_CTRL3_FILTER_TYPE(1));
|
|
/* period = SUN4I_GPADC_TPR_TEMP_PERIOD * 256 * 16 / clkin; ~0.6s */
|
|
regmap_write(info->regmap, SUN4I_GPADC_TPR,
|
|
SUN4I_GPADC_TPR_TEMP_ENABLE |
|
|
SUN4I_GPADC_TPR_TEMP_PERIOD(800));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_gpadc_get_temp(void *data, int *temp)
|
|
{
|
|
struct sun4i_gpadc_iio *info = data;
|
|
int val, scale, offset;
|
|
|
|
if (sun4i_gpadc_temp_read(info->indio_dev, &val))
|
|
return -ETIMEDOUT;
|
|
|
|
sun4i_gpadc_temp_scale(info->indio_dev, &scale);
|
|
sun4i_gpadc_temp_offset(info->indio_dev, &offset);
|
|
|
|
*temp = (val + offset) * scale;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
|
|
.get_temp = &sun4i_gpadc_get_temp,
|
|
};
|
|
|
|
static const struct dev_pm_ops sun4i_gpadc_pm_ops = {
|
|
.runtime_suspend = &sun4i_gpadc_runtime_suspend,
|
|
.runtime_resume = &sun4i_gpadc_runtime_resume,
|
|
};
|
|
|
|
static int sun4i_irq_init(struct platform_device *pdev, const char *name,
|
|
irq_handler_t handler, const char *devname,
|
|
unsigned int *irq, atomic_t *atomic)
|
|
{
|
|
int ret;
|
|
struct sun4i_gpadc_dev *mfd_dev = dev_get_drvdata(pdev->dev.parent);
|
|
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(&pdev->dev));
|
|
|
|
/*
|
|
* Once the interrupt is activated, the IP continuously performs
|
|
* conversions thus throws interrupts. The interrupt is activated right
|
|
* after being requested but we want to control when these interrupts
|
|
* occur thus we disable it right after being requested. However, an
|
|
* interrupt might occur between these two instructions and we have to
|
|
* make sure that does not happen, by using atomic flags. We set the
|
|
* flag before requesting the interrupt and unset it right after
|
|
* disabling the interrupt. When an interrupt occurs between these two
|
|
* instructions, reading the atomic flag will tell us to ignore the
|
|
* interrupt.
|
|
*/
|
|
atomic_set(atomic, 1);
|
|
|
|
ret = platform_get_irq_byname(pdev, name);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "no %s interrupt registered\n", name);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_irq_get_virq(mfd_dev->regmap_irqc, ret);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to get virq for irq %s\n", name);
|
|
return ret;
|
|
}
|
|
|
|
*irq = ret;
|
|
ret = devm_request_any_context_irq(&pdev->dev, *irq, handler, 0,
|
|
devname, info);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "could not request %s interrupt: %d\n",
|
|
name, ret);
|
|
return ret;
|
|
}
|
|
|
|
disable_irq(*irq);
|
|
atomic_set(atomic, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sun4i_gpadc_of_id[] = {
|
|
{
|
|
.compatible = "allwinner,sun8i-a33-ths",
|
|
.data = &sun8i_a33_gpadc_data,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
|
|
struct iio_dev *indio_dev)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
|
|
struct resource *mem;
|
|
void __iomem *base;
|
|
int ret;
|
|
|
|
info->data = of_device_get_match_data(&pdev->dev);
|
|
if (!info->data)
|
|
return -ENODEV;
|
|
|
|
info->no_irq = true;
|
|
indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
|
|
indio_dev->channels = sun8i_a33_gpadc_channels;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
info->regmap = devm_regmap_init_mmio(&pdev->dev, base,
|
|
&sun4i_gpadc_regmap_config);
|
|
if (IS_ERR(info->regmap)) {
|
|
ret = PTR_ERR(info->regmap);
|
|
dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_THERMAL_OF))
|
|
info->sensor_device = &pdev->dev;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
|
|
struct iio_dev *indio_dev)
|
|
{
|
|
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
|
|
struct sun4i_gpadc_dev *sun4i_gpadc_dev =
|
|
dev_get_drvdata(pdev->dev.parent);
|
|
int ret;
|
|
|
|
info->no_irq = false;
|
|
info->regmap = sun4i_gpadc_dev->regmap;
|
|
|
|
indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
|
|
indio_dev->channels = sun4i_gpadc_channels;
|
|
|
|
info->data = (struct gpadc_data *)platform_get_device_id(pdev)->driver_data;
|
|
|
|
/*
|
|
* Since the controller needs to be in touchscreen mode for its thermal
|
|
* sensor to operate properly, and that switching between the two modes
|
|
* needs a delay, always registering in the thermal framework will
|
|
* significantly slow down the conversion rate of the ADCs.
|
|
*
|
|
* Therefore, instead of depending on THERMAL_OF in Kconfig, we only
|
|
* register the sensor if that option is enabled, eventually leaving
|
|
* that choice to the user.
|
|
*/
|
|
|
|
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
|
|
/*
|
|
* This driver is a child of an MFD which has a node in the DT
|
|
* but not its children, because of DT backward compatibility
|
|
* for A10, A13 and A31 SoCs. Therefore, the resulting devices
|
|
* of this driver do not have an of_node variable.
|
|
* However, its parent (the MFD driver) has an of_node variable
|
|
* and since devm_thermal_zone_of_sensor_register uses its first
|
|
* argument to match the phandle defined in the node of the
|
|
* thermal driver with the of_node of the device passed as first
|
|
* argument and the third argument to call ops from
|
|
* thermal_zone_of_device_ops, the solution is to use the parent
|
|
* device as first argument to match the phandle with its
|
|
* of_node, and the device from this driver as third argument to
|
|
* return the temperature.
|
|
*/
|
|
info->sensor_device = pdev->dev.parent;
|
|
} else {
|
|
indio_dev->num_channels =
|
|
ARRAY_SIZE(sun4i_gpadc_channels_no_temp);
|
|
indio_dev->channels = sun4i_gpadc_channels_no_temp;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
|
|
ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING",
|
|
sun4i_gpadc_temp_data_irq_handler,
|
|
"temp_data", &info->temp_data_irq,
|
|
&info->ignore_temp_data_irq);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
|
|
sun4i_gpadc_fifo_data_irq_handler, "fifo_data",
|
|
&info->fifo_data_irq, &info->ignore_fifo_data_irq);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
|
|
ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev,
|
|
"failed to register iio map array\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_gpadc_probe(struct platform_device *pdev)
|
|
{
|
|
struct sun4i_gpadc_iio *info;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
info = iio_priv(indio_dev);
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
mutex_init(&info->mutex);
|
|
info->indio_dev = indio_dev;
|
|
init_completion(&info->completion);
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->dev.of_node = pdev->dev.of_node;
|
|
indio_dev->info = &sun4i_gpadc_iio_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
if (pdev->dev.of_node)
|
|
ret = sun4i_gpadc_probe_dt(pdev, indio_dev);
|
|
else
|
|
ret = sun4i_gpadc_probe_mfd(pdev, indio_dev);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev,
|
|
SUN4I_GPADC_AUTOSUSPEND_DELAY);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_suspended(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
|
|
info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
|
|
0, info,
|
|
&sun4i_ts_tz_ops);
|
|
/*
|
|
* Do not fail driver probing when failing to register in
|
|
* thermal because no thermal DT node is found.
|
|
*/
|
|
if (IS_ERR(info->tzd) && PTR_ERR(info->tzd) != -ENODEV) {
|
|
dev_err(&pdev->dev,
|
|
"could not register thermal sensor: %ld\n",
|
|
PTR_ERR(info->tzd));
|
|
return PTR_ERR(info->tzd);
|
|
}
|
|
}
|
|
|
|
ret = devm_iio_device_register(&pdev->dev, indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "could not register the device\n");
|
|
goto err_map;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_map:
|
|
if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF))
|
|
iio_map_array_unregister(indio_dev);
|
|
|
|
pm_runtime_put(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sun4i_gpadc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
|
|
|
|
pm_runtime_put(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
if (!IS_ENABLED(CONFIG_THERMAL_OF))
|
|
return 0;
|
|
|
|
thermal_zone_of_sensor_unregister(info->sensor_device, info->tzd);
|
|
|
|
if (!info->no_irq)
|
|
iio_map_array_unregister(indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id sun4i_gpadc_id[] = {
|
|
{ "sun4i-a10-gpadc-iio", (kernel_ulong_t)&sun4i_gpadc_data },
|
|
{ "sun5i-a13-gpadc-iio", (kernel_ulong_t)&sun5i_gpadc_data },
|
|
{ "sun6i-a31-gpadc-iio", (kernel_ulong_t)&sun6i_gpadc_data },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, sun4i_gpadc_id);
|
|
|
|
static struct platform_driver sun4i_gpadc_driver = {
|
|
.driver = {
|
|
.name = "sun4i-gpadc-iio",
|
|
.of_match_table = sun4i_gpadc_of_id,
|
|
.pm = &sun4i_gpadc_pm_ops,
|
|
},
|
|
.id_table = sun4i_gpadc_id,
|
|
.probe = sun4i_gpadc_probe,
|
|
.remove = sun4i_gpadc_remove,
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun4i_gpadc_of_id);
|
|
|
|
module_platform_driver(sun4i_gpadc_driver);
|
|
|
|
MODULE_DESCRIPTION("ADC driver for sunxi platforms");
|
|
MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
|
|
MODULE_LICENSE("GPL v2");
|