leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d2ccc902da
linux/drivers/net/wireless/iwlwifi/iwl-config.h
Eyal Shapira 183d281d26 iwlwifi: publish STBC support in HT 
Not all chips support STBC so allow this to be
another config parameter per chip type. If STBC
is supported then publish it in the HT caps.

Since 7260/7265/3160 chips support it - set the stbc
support bit.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17 19:39:38 +02:00

313 lines
11 KiB
C
Raw Blame History

/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __IWL_CONFIG_H__
#define __IWL_CONFIG_H__
#include <linux/types.h>
#include <net/mac80211.h>
enum iwl_device_family {
IWL_DEVICE_FAMILY_UNDEFINED,
IWL_DEVICE_FAMILY_1000,
IWL_DEVICE_FAMILY_100,
IWL_DEVICE_FAMILY_2000,
IWL_DEVICE_FAMILY_2030,
IWL_DEVICE_FAMILY_105,
IWL_DEVICE_FAMILY_135,
IWL_DEVICE_FAMILY_5000,
IWL_DEVICE_FAMILY_5150,
IWL_DEVICE_FAMILY_6000,
IWL_DEVICE_FAMILY_6000i,
IWL_DEVICE_FAMILY_6005,
IWL_DEVICE_FAMILY_6030,
IWL_DEVICE_FAMILY_6050,
IWL_DEVICE_FAMILY_6150,
IWL_DEVICE_FAMILY_7000,
};
/*
* LED mode
* IWL_LED_DEFAULT: use device default
* IWL_LED_RF_STATE: turn LED on/off based on RF state
* LED ON = RF ON
* LED OFF = RF OFF
* IWL_LED_BLINK: adjust led blink rate based on blink table
* IWL_LED_DISABLE: led disabled
*/
enum iwl_led_mode {
IWL_LED_DEFAULT,
IWL_LED_RF_STATE,
IWL_LED_BLINK,
IWL_LED_DISABLE,
};
/*
* This is the threshold value of plcp error rate per 100mSecs. It is
* used to set and check for the validity of plcp_delta.
*/
#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1
#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50
#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100
#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200
#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255
#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0
/* TX queue watchdog timeouts in mSecs */
#define IWL_WATCHDOG_DISABLED 0
#define IWL_DEF_WD_TIMEOUT 2000
#define IWL_LONG_WD_TIMEOUT 10000
#define IWL_MAX_WD_TIMEOUT 120000
/* Antenna presence definitions */
#define ANT_NONE 0x0
#define ANT_A BIT(0)
#define ANT_B BIT(1)
#define ANT_C BIT(2)
#define ANT_AB (ANT_A | ANT_B)
#define ANT_AC (ANT_A | ANT_C)
#define ANT_BC (ANT_B | ANT_C)
#define ANT_ABC (ANT_A | ANT_B | ANT_C)
static inline u8 num_of_ant(u8 mask)
{
return !!((mask) & ANT_A) +
!!((mask) & ANT_B) +
!!((mask) & ANT_C);
}
/*
* @max_ll_items: max number of OTP blocks
* @shadow_ram_support: shadow support for OTP memory
* @led_compensation: compensate on the led on/off time per HW according
* to the deviation to achieve the desired led frequency.
* The detail algorithm is described in iwl-led.c
* @wd_timeout: TX queues watchdog timeout
* @max_event_log_size: size of event log buffer size for ucode event logging
* @shadow_reg_enable: HW shadow register support
*/
struct iwl_base_params {
int eeprom_size;
int num_of_queues; /* def: HW dependent */
/* for iwl_pcie_apm_init() */
u32 pll_cfg_val;
const u16 max_ll_items;
const bool shadow_ram_support;
u16 led_compensation;
unsigned int wd_timeout;
u32 max_event_log_size;
const bool shadow_reg_enable;
const bool pcie_l1_allowed;
};
/*
* @stbc: support Tx STBC and 1*SS Rx STBC
* @use_rts_for_aggregation: use rts/cts protection for HT traffic
* @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40
*/
struct iwl_ht_params {
enum ieee80211_smps_mode smps_mode;
const bool ht_greenfield_support; /* if used set to true */
const bool stbc;
bool use_rts_for_aggregation;
u8 ht40_bands;
};
/*
* information on how to parse the EEPROM
*/
#define EEPROM_REG_BAND_1_CHANNELS 0x08
#define EEPROM_REG_BAND_2_CHANNELS 0x26
#define EEPROM_REG_BAND_3_CHANNELS 0x42
#define EEPROM_REG_BAND_4_CHANNELS 0x5C
#define EEPROM_REG_BAND_5_CHANNELS 0x74
#define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82
#define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92
#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80
#define EEPROM_REGULATORY_BAND_NO_HT40 0
struct iwl_eeprom_params {
const u8 regulatory_bands[7];
bool enhanced_txpower;
};
/**
* struct iwl_cfg
* @name: Offical name of the device
* @fw_name_pre: Firmware filename prefix. The api version and extension
* (.ucode) will be added to filename before loading from disk. The
* filename is constructed as fw_name_pre<api>.ucode.
* @ucode_api_max: Highest version of uCode API supported by driver.
* @ucode_api_ok: oldest version of the uCode API that is OK to load
* without a warning, for use in transitions
* @ucode_api_min: Lowest version of uCode API supported by driver.
* @max_inst_size: The maximal length of the fw inst section
* @max_data_size: The maximal length of the fw data section
* @valid_tx_ant: valid transmit antenna
* @valid_rx_ant: valid receive antenna
* @nvm_ver: NVM version
* @nvm_calib_ver: NVM calibration version
* @lib: pointer to the lib ops
* @base_params: pointer to basic parameters
* @ht_params: point to ht parameters
* @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
* @internal_wimax_coex: internal wifi/wimax combo device
* @high_temp: Is this NIC is designated to be in high temperature.
* @host_interrupt_operation_mode: device needs host interrupt operation
* mode set
*
* We enable the driver to be backward compatible wrt. hardware features.
* API differences in uCode shouldn't be handled here but through TLVs
* and/or the uCode API version instead.
*/
struct iwl_cfg {
/* params specific to an individual device within a device family */
const char *name;
const char *fw_name_pre;
const unsigned int ucode_api_max;
const unsigned int ucode_api_ok;
const unsigned int ucode_api_min;
const enum iwl_device_family device_family;
const u32 max_data_size;
const u32 max_inst_size;
u8 valid_tx_ant;
u8 valid_rx_ant;
bool bt_shared_single_ant;
u16 nvm_ver;
u16 nvm_calib_ver;
/* params not likely to change within a device family */
const struct iwl_base_params *base_params;
/* params likely to change within a device family */
const struct iwl_ht_params *ht_params;
const struct iwl_eeprom_params *eeprom_params;
enum iwl_led_mode led_mode;
const bool rx_with_siso_diversity;
const bool internal_wimax_coex;
const bool host_interrupt_operation_mode;
bool high_temp;
};
/*
* This list declares the config structures for all devices.
*/
#if IS_ENABLED(CONFIG_IWLDVM)
extern const struct iwl_cfg iwl5300_agn_cfg;
extern const struct iwl_cfg iwl5100_agn_cfg;
extern const struct iwl_cfg iwl5350_agn_cfg;
extern const struct iwl_cfg iwl5100_bgn_cfg;
extern const struct iwl_cfg iwl5100_abg_cfg;
extern const struct iwl_cfg iwl5150_agn_cfg;
extern const struct iwl_cfg iwl5150_abg_cfg;
extern const struct iwl_cfg iwl6005_2agn_cfg;
extern const struct iwl_cfg iwl6005_2abg_cfg;
extern const struct iwl_cfg iwl6005_2bg_cfg;
extern const struct iwl_cfg iwl6005_2agn_sff_cfg;
extern const struct iwl_cfg iwl6005_2agn_d_cfg;
extern const struct iwl_cfg iwl6005_2agn_mow1_cfg;
extern const struct iwl_cfg iwl6005_2agn_mow2_cfg;
extern const struct iwl_cfg iwl1030_bgn_cfg;
extern const struct iwl_cfg iwl1030_bg_cfg;
extern const struct iwl_cfg iwl6030_2agn_cfg;
extern const struct iwl_cfg iwl6030_2abg_cfg;
extern const struct iwl_cfg iwl6030_2bgn_cfg;
extern const struct iwl_cfg iwl6030_2bg_cfg;
extern const struct iwl_cfg iwl6000i_2agn_cfg;
extern const struct iwl_cfg iwl6000i_2abg_cfg;
extern const struct iwl_cfg iwl6000i_2bg_cfg;
extern const struct iwl_cfg iwl6000_3agn_cfg;
extern const struct iwl_cfg iwl6050_2agn_cfg;
extern const struct iwl_cfg iwl6050_2abg_cfg;
extern const struct iwl_cfg iwl6150_bgn_cfg;
extern const struct iwl_cfg iwl6150_bg_cfg;
extern const struct iwl_cfg iwl1000_bgn_cfg;
extern const struct iwl_cfg iwl1000_bg_cfg;
extern const struct iwl_cfg iwl100_bgn_cfg;
extern const struct iwl_cfg iwl100_bg_cfg;
extern const struct iwl_cfg iwl130_bgn_cfg;
extern const struct iwl_cfg iwl130_bg_cfg;
extern const struct iwl_cfg iwl2000_2bgn_cfg;
extern const struct iwl_cfg iwl2000_2bgn_d_cfg;
extern const struct iwl_cfg iwl2030_2bgn_cfg;
extern const struct iwl_cfg iwl6035_2agn_cfg;
extern const struct iwl_cfg iwl6035_2agn_sff_cfg;
extern const struct iwl_cfg iwl105_bgn_cfg;
extern const struct iwl_cfg iwl105_bgn_d_cfg;
extern const struct iwl_cfg iwl135_bgn_cfg;
#endif /* CONFIG_IWLDVM */
#if IS_ENABLED(CONFIG_IWLMVM)
extern const struct iwl_cfg iwl7260_2ac_cfg;
extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp;
extern const struct iwl_cfg iwl7260_2n_cfg;
extern const struct iwl_cfg iwl7260_n_cfg;
extern const struct iwl_cfg iwl3160_2ac_cfg;
extern const struct iwl_cfg iwl3160_2n_cfg;
extern const struct iwl_cfg iwl3160_n_cfg;
extern const struct iwl_cfg iwl7265_2ac_cfg;
extern const struct iwl_cfg iwl7265_2n_cfg;
extern const struct iwl_cfg iwl7265_n_cfg;
#endif /* CONFIG_IWLMVM */
#endif /* __IWL_CONFIG_H__ */
Reference in New Issue View Git Blame Copy Permalink