linux/Documentation/media/v4l-drivers/saa7134.rst
Mauro Carvalho Chehab f2ac8ce823 media: docs: brainless mass add SPDX headers to all media files
All Documentation files outside the uAPI are all licensed with,
at least, GPL 2.0. So, mark them as such.

The ondes at media/uapi are at least GFDL 1.1+.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05 10:40:34 -05:00

116 lines
2.9 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0
The saa7134 driver
==================
Author Gerd Hoffmann
This is a v4l2/oss device driver for saa7130/33/34/35 based capture / TV
boards. See http://www.semiconductors.philips.com/pip/saa7134hl for a
description.
Status
------
Almost everything is working. video, sound, tuner, radio, mpeg ts, ...
As with bttv, card-specific tweaks are needed. Check CARDLIST for a
list of known TV cards and saa7134-cards.c for the drivers card
configuration info.
Build
-----
Pick up videodev + v4l2 patches from http://bytesex.org/patches/.
Configure, build, install + boot the new kernel. You'll need at least
these config options:
.. code-block:: none
CONFIG_I2C=m
CONFIG_VIDEO_DEV=m
Type "make" to build the driver now. "make install" installs the
driver. "modprobe saa7134" should load it. Depending on the card you
might have to pass card=<nr> as insmod option, check CARDLIST for
valid choices.
Changes / Fixes
---------------
Please mail me unified diffs ("diff -u") with your changes, and don't
forget to tell me what it changes / which problem it fixes / whatever
it is good for ...
Known Problems
--------------
* The tuner for the flyvideos isn't detected automatically and the
default might not work for you depending on which version you have.
There is a tuner= insmod option to override the driver's default.
Card Variations:
----------------
Cards can use either of these two crystals (xtal):
- 32.11 MHz -> .audio_clock=0x187de7
- 24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600)
Some details about 30/34/35:
- saa7130 - low-price chip, doesn't have mute, that is why all those
cards should have .mute field defined in their tuner structure.
- saa7134 - usual chip
- saa7133/35 - saa7135 is probably a marketing decision, since all those
chips identifies itself as 33 on pci.
LifeView GPIOs
--------------
This section was authored by: Peter Missel <peter.missel@onlinehome.de>
- LifeView FlyTV Platinum FM (LR214WF)
- GP27 MDT2005 PB4 pin 10
- GP26 MDT2005 PB3 pin 9
- GP25 MDT2005 PB2 pin 8
- GP23 MDT2005 PB1 pin 7
- GP22 MDT2005 PB0 pin 6
- GP21 MDT2005 PB5 pin 11
- GP20 MDT2005 PB6 pin 12
- GP19 MDT2005 PB7 pin 13
- nc MDT2005 PA3 pin 2
- Remote MDT2005 PA2 pin 1
- GP18 MDT2005 PA1 pin 18
- nc MDT2005 PA0 pin 17 strap low
- GP17 Strap "GP7"=High
- GP16 Strap "GP6"=High
- 0=Radio 1=TV
- Drives SA630D ENCH1 and HEF4052 A1 pinsto do FM radio through
SIF input
- GP15 nc
- GP14 nc
- GP13 nc
- GP12 Strap "GP5" = High
- GP11 Strap "GP4" = High
- GP10 Strap "GP3" = High
- GP09 Strap "GP2" = Low
- GP08 Strap "GP1" = Low
- GP07.00 nc
Credits
-------
andrew.stevens@philips.com + werner.leeb@philips.com for providing
saa7134 hardware specs and sample board.