linux/drivers/net/wireless/wl12xx/wl1271_cmd.h
Luciano Coelho d0f63b2021 wl1271: fix endianess issues
We were not handling endianess correctly.  The wl1271 chip runs on
little-endian values.  This patch makes sure that all the communication with
the wl1271 firmware is done in little-endian by using cpu_to_le* and
le*_to_cpu where appropriate.

Also, all the struct definitions for data exchanged with the firmware has
been changed to use __le16/32 types instead of u16/32.

This fixes a few sparse warnings, such as these:

drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types)
drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types)
drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types)
drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types)
drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types)
drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types)
drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types)
drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types)
drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types)
drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types)

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27 16:48:19 -04:00

492 lines
12 KiB
C

/*
* This file is part of wl1271
*
* Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
* Copyright (C) 2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __WL1271_CMD_H__
#define __WL1271_CMD_H__
#include "wl1271.h"
struct acx_header;
int wl1271_cmd_send(struct wl1271 *wl, u16 type, void *buf, size_t buf_len);
int wl1271_cmd_join(struct wl1271 *wl);
int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable);
int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode);
int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
size_t len);
int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
u8 active_scan, u8 high_prio, u8 band,
u8 probe_requests);
int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
void *buf, size_t buf_len);
int wl1271_cmd_build_null_data(struct wl1271 *wl);
int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid);
int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len,
u8 band);
int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id);
int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
u8 key_size, const u8 *key, const u8 *addr,
u32 tx_seq_32, u16 tx_seq_16);
int wl1271_cmd_disconnect(struct wl1271 *wl);
enum wl1271_commands {
CMD_INTERROGATE = 1, /*use this to read information elements*/
CMD_CONFIGURE = 2, /*use this to write information elements*/
CMD_ENABLE_RX = 3,
CMD_ENABLE_TX = 4,
CMD_DISABLE_RX = 5,
CMD_DISABLE_TX = 6,
CMD_SCAN = 8,
CMD_STOP_SCAN = 9,
CMD_START_JOIN = 11,
CMD_SET_KEYS = 12,
CMD_READ_MEMORY = 13,
CMD_WRITE_MEMORY = 14,
CMD_SET_TEMPLATE = 19,
CMD_TEST = 23,
CMD_NOISE_HIST = 28,
CMD_LNA_CONTROL = 32,
CMD_SET_BCN_MODE = 33,
CMD_MEASUREMENT = 34,
CMD_STOP_MEASUREMENT = 35,
CMD_DISCONNECT = 36,
CMD_SET_PS_MODE = 37,
CMD_CHANNEL_SWITCH = 38,
CMD_STOP_CHANNEL_SWICTH = 39,
CMD_AP_DISCOVERY = 40,
CMD_STOP_AP_DISCOVERY = 41,
CMD_SPS_SCAN = 42,
CMD_STOP_SPS_SCAN = 43,
CMD_HEALTH_CHECK = 45,
CMD_DEBUG = 46,
CMD_TRIGGER_SCAN_TO = 47,
CMD_CONNECTION_SCAN_CFG = 48,
CMD_CONNECTION_SCAN_SSID_CFG = 49,
CMD_START_PERIODIC_SCAN = 50,
CMD_STOP_PERIODIC_SCAN = 51,
CMD_SET_STA_STATE = 52,
NUM_COMMANDS,
MAX_COMMAND_ID = 0xFFFF,
};
#define MAX_CMD_PARAMS 572
enum cmd_templ {
CMD_TEMPL_NULL_DATA = 0,
CMD_TEMPL_BEACON,
CMD_TEMPL_CFG_PROBE_REQ_2_4,
CMD_TEMPL_CFG_PROBE_REQ_5,
CMD_TEMPL_PROBE_RESPONSE,
CMD_TEMPL_QOS_NULL_DATA,
CMD_TEMPL_PS_POLL,
CMD_TEMPL_KLV,
CMD_TEMPL_DISCONNECT,
CMD_TEMPL_PROBE_REQ_2_4, /* for firmware internal use only */
CMD_TEMPL_PROBE_REQ_5, /* for firmware internal use only */
CMD_TEMPL_BAR, /* for firmware internal use only */
CMD_TEMPL_CTS, /*
* For CTS-to-self (FastCTS) mechanism
* for BT/WLAN coexistence (SoftGemini). */
CMD_TEMPL_MAX = 0xff
};
/* unit ms */
#define WL1271_COMMAND_TIMEOUT 2000
#define WL1271_CMD_TEMPL_MAX_SIZE 252
struct wl1271_cmd_header {
__le16 id;
__le16 status;
/* payload */
u8 data[0];
} __attribute__ ((packed));
#define WL1271_CMD_MAX_PARAMS 572
struct wl1271_command {
struct wl1271_cmd_header header;
u8 parameters[WL1271_CMD_MAX_PARAMS];
} __attribute__ ((packed));
enum {
CMD_MAILBOX_IDLE = 0,
CMD_STATUS_SUCCESS = 1,
CMD_STATUS_UNKNOWN_CMD = 2,
CMD_STATUS_UNKNOWN_IE = 3,
CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11,
CMD_STATUS_RX_BUSY = 13,
CMD_STATUS_INVALID_PARAM = 14,
CMD_STATUS_TEMPLATE_TOO_LARGE = 15,
CMD_STATUS_OUT_OF_MEMORY = 16,
CMD_STATUS_STA_TABLE_FULL = 17,
CMD_STATUS_RADIO_ERROR = 18,
CMD_STATUS_WRONG_NESTING = 19,
CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/
CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/
MAX_COMMAND_STATUS = 0xff
};
/*
* CMD_READ_MEMORY
*
* The host issues this command to read the WiLink device memory/registers.
*
* Note: The Base Band address has special handling (16 bits registers and
* addresses). For more information, see the hardware specification.
*/
/*
* CMD_WRITE_MEMORY
*
* The host issues this command to write the WiLink device memory/registers.
*
* The Base Band address has special handling (16 bits registers and
* addresses). For more information, see the hardware specification.
*/
#define MAX_READ_SIZE 256
struct cmd_read_write_memory {
struct wl1271_cmd_header header;
/* The address of the memory to read from or write to.*/
__le32 addr;
/* The amount of data in bytes to read from or write to the WiLink
* device.*/
__le32 size;
/* The actual value read from or written to the Wilink. The source
of this field is the Host in WRITE command or the Wilink in READ
command. */
u8 value[MAX_READ_SIZE];
};
#define CMDMBOX_HEADER_LEN 4
#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
enum {
BSS_TYPE_IBSS = 0,
BSS_TYPE_STA_BSS = 2,
BSS_TYPE_AP_BSS = 3,
MAX_BSS_TYPE = 0xFF
};
#define WL1271_JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */
#define WL1271_JOIN_CMD_TX_SESSION_OFFSET 1
#define WL1271_JOIN_CMD_BSS_TYPE_5GHZ 0x10
struct wl1271_cmd_join {
struct wl1271_cmd_header header;
__le32 bssid_lsb;
__le16 bssid_msb;
__le16 beacon_interval; /* in TBTTs */
__le32 rx_config_options;
__le32 rx_filter_options;
/*
* The target uses this field to determine the rate at
* which to transmit control frame responses (such as
* ACK or CTS frames).
*/
__le32 basic_rate_set;
u8 dtim_interval;
/*
* bits 0-2: This bitwise field specifies the type
* of BSS to start or join (BSS_TYPE_*).
* bit 4: Band - The radio band in which to join
* or start.
* 0 - 2.4GHz band
* 1 - 5GHz band
* bits 3, 5-7: Reserved
*/
u8 bss_type;
u8 channel;
u8 ssid_len;
u8 ssid[IW_ESSID_MAX_SIZE];
u8 ctrl; /* JOIN_CMD_CTRL_* */
u8 reserved[3];
} __attribute__ ((packed));
struct cmd_enabledisable_path {
struct wl1271_cmd_header header;
u8 channel;
u8 padding[3];
} __attribute__ ((packed));
struct wl1271_cmd_template_set {
struct wl1271_cmd_header header;
__le16 len;
u8 template_type;
u8 index; /* relevant only for KLV_TEMPLATE type */
__le32 enabled_rates;
u8 short_retry_limit;
u8 long_retry_limit;
u8 aflags;
u8 reserved;
u8 template_data[WL1271_CMD_TEMPL_MAX_SIZE];
} __attribute__ ((packed));
#define TIM_ELE_ID 5
#define PARTIAL_VBM_MAX 251
struct wl1271_tim {
u8 identity;
u8 length;
u8 dtim_count;
u8 dtim_period;
u8 bitmap_ctrl;
u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
} __attribute__ ((packed));
enum wl1271_cmd_ps_mode {
STATION_ACTIVE_MODE,
STATION_POWER_SAVE_MODE
};
struct wl1271_cmd_ps_params {
struct wl1271_cmd_header header;
u8 ps_mode; /* STATION_* */
u8 send_null_data; /* Do we have to send NULL data packet ? */
u8 retries; /* Number of retires for the initial NULL data packet */
/*
* TUs during which the target stays awake after switching
* to power save mode.
*/
u8 hang_over_period;
__le32 null_data_rate;
} __attribute__ ((packed));
/* HW encryption keys */
#define NUM_ACCESS_CATEGORIES_COPY 4
#define MAX_KEY_SIZE 32
enum wl1271_cmd_key_action {
KEY_ADD_OR_REPLACE = 1,
KEY_REMOVE = 2,
KEY_SET_ID = 3,
MAX_KEY_ACTION = 0xffff,
};
enum wl1271_cmd_key_type {
KEY_NONE = 0,
KEY_WEP = 1,
KEY_TKIP = 2,
KEY_AES = 3,
KEY_GEM = 4
};
/* FIXME: Add description for key-types */
struct wl1271_cmd_set_keys {
struct wl1271_cmd_header header;
/* Ignored for default WEP key */
u8 addr[ETH_ALEN];
/* key_action_e */
__le16 key_action;
__le16 reserved_1;
/* key size in bytes */
u8 key_size;
/* key_type_e */
u8 key_type;
u8 ssid_profile;
/*
* TKIP, AES: frame's key id field.
* For WEP default key: key id;
*/
u8 id;
u8 reserved_2[6];
u8 key[MAX_KEY_SIZE];
__le16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
__le32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
} __attribute__ ((packed));
#define WL1271_SCAN_MAX_CHANNELS 24
#define WL1271_SCAN_DEFAULT_TAG 1
#define WL1271_SCAN_CURRENT_TX_PWR 0
#define WL1271_SCAN_OPT_ACTIVE 0
#define WL1271_SCAN_OPT_PASSIVE 1
#define WL1271_SCAN_OPT_PRIORITY_HIGH 4
#define WL1271_SCAN_CHAN_MIN_DURATION 30000 /* TU */
#define WL1271_SCAN_CHAN_MAX_DURATION 60000 /* TU */
#define WL1271_SCAN_BAND_2_4_GHZ 0
#define WL1271_SCAN_BAND_5_GHZ 1
#define WL1271_SCAN_BAND_DUAL 2
struct basic_scan_params {
__le32 rx_config_options;
__le32 rx_filter_options;
/* Scan option flags (WL1271_SCAN_OPT_*) */
__le16 scan_options;
/* Number of scan channels in the list (maximum 30) */
u8 num_channels;
/* This field indicates the number of probe requests to send
per channel for an active scan */
u8 num_probe_requests;
/* Rate bit field for sending the probes */
__le32 tx_rate;
u8 tid_trigger;
u8 ssid_len;
/* in order to align */
u8 padding1[2];
u8 ssid[IW_ESSID_MAX_SIZE];
/* Band to scan */
u8 band;
u8 use_ssid_list;
u8 scan_tag;
u8 padding2;
} __attribute__ ((packed));
struct basic_scan_channel_params {
/* Duration in TU to wait for frames on a channel for active scan */
__le32 min_duration;
__le32 max_duration;
__le32 bssid_lsb;
__le16 bssid_msb;
u8 early_termination;
u8 tx_power_att;
u8 channel;
/* FW internal use only! */
u8 dfs_candidate;
u8 activity_detected;
u8 pad;
} __attribute__ ((packed));
struct wl1271_cmd_scan {
struct wl1271_cmd_header header;
struct basic_scan_params params;
struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS];
} __attribute__ ((packed));
struct wl1271_cmd_trigger_scan_to {
struct wl1271_cmd_header header;
__le32 timeout;
};
struct wl1271_cmd_test_header {
u8 id;
u8 padding[3];
};
enum wl1271_channel_tune_bands {
WL1271_CHANNEL_TUNE_BAND_2_4,
WL1271_CHANNEL_TUNE_BAND_5,
WL1271_CHANNEL_TUNE_BAND_4_9
};
#define WL1271_PD_REFERENCE_POINT_BAND_B_G 0
#define TEST_CMD_P2G_CAL 0x02
#define TEST_CMD_CHANNEL_TUNE 0x0d
#define TEST_CMD_UPDATE_PD_REFERENCE_POINT 0x1d
struct wl1271_cmd_cal_channel_tune {
struct wl1271_cmd_header header;
struct wl1271_cmd_test_header test;
u8 band;
u8 channel;
__le16 radio_status;
} __attribute__ ((packed));
struct wl1271_cmd_cal_update_ref_point {
struct wl1271_cmd_header header;
struct wl1271_cmd_test_header test;
__le32 ref_power;
__le32 ref_detector;
u8 sub_band;
u8 padding[3];
} __attribute__ ((packed));
#define MAX_TLV_LENGTH 400
#define MAX_NVS_VERSION_LENGTH 12
#define WL1271_CAL_P2G_BAND_B_G BIT(0)
struct wl1271_cmd_cal_p2g {
struct wl1271_cmd_header header;
struct wl1271_cmd_test_header test;
__le16 len;
u8 buf[MAX_TLV_LENGTH];
u8 type;
u8 padding;
__le16 radio_status;
u8 nvs_version[MAX_NVS_VERSION_LENGTH];
u8 sub_band_mask;
u8 padding2;
} __attribute__ ((packed));
/*
* There are three types of disconnections:
*
* DISCONNECT_IMMEDIATE: the fw doesn't send any frames
* DISCONNECT_DEAUTH: the fw generates a DEAUTH request with the reason
* we have passed
* DISCONNECT_DISASSOC: the fw generates a DESASSOC request with the reason
* we have passed
*/
enum wl1271_disconnect_type {
DISCONNECT_IMMEDIATE,
DISCONNECT_DEAUTH,
DISCONNECT_DISASSOC
};
struct wl1271_cmd_disconnect {
__le32 rx_config_options;
__le32 rx_filter_options;
__le16 reason;
u8 type;
u8 padding;
} __attribute__ ((packed));
#endif /* __WL1271_CMD_H__ */