linux/drivers/media/dvb/siano/sms-cards.c
Mauro Carvalho Chehab 15195d3a83 [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge
There are two "hauppauge-new" keymaps, one with protocol
unknown, and the other with the protocol marked accordingly.
However, both tables are miss-named.

Also, the old rc-hauppauge-new is broken, as it mixes
three different controllers as if they were just one.

This patch solves half of the problem by renaming the
correct keycode table as just rc-hauppauge. This table
contains the codes for the four different types of
remote controllers found on Hauppauge cards, properly
mapped with their different addresses.

 create mode 100644 drivers/media/rc/keymaps/rc-hauppauge.c
 delete mode 100644 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
[Jarod: fix up RC_MAP_HAUPPAUGE defines]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-22 19:24:14 -03:00

311 lines
8.5 KiB
C

/*
* Card-specific functions for the Siano SMS1xxx USB dongle
*
* Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "sms-cards.h"
#include "smsir.h"
static int sms_dbg;
module_param_named(cards_dbg, sms_dbg, int, 0644);
MODULE_PARM_DESC(cards_dbg, "set debug level (info=1, adv=2 (or-able))");
static struct sms_board sms_boards[] = {
[SMS_BOARD_UNKNOWN] = {
.name = "Unknown board",
},
[SMS1XXX_BOARD_SIANO_STELLAR] = {
.name = "Siano Stellar Digital Receiver",
.type = SMS_STELLAR,
},
[SMS1XXX_BOARD_SIANO_NOVA_A] = {
.name = "Siano Nova A Digital Receiver",
.type = SMS_NOVA_A0,
},
[SMS1XXX_BOARD_SIANO_NOVA_B] = {
.name = "Siano Nova B Digital Receiver",
.type = SMS_NOVA_B0,
},
[SMS1XXX_BOARD_SIANO_VEGA] = {
.name = "Siano Vega Digital Receiver",
.type = SMS_VEGA,
},
[SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT] = {
.name = "Hauppauge Catamount",
.type = SMS_STELLAR,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw",
},
[SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A] = {
.name = "Hauppauge Okemo-A",
.type = SMS_NOVA_A0,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw",
},
[SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B] = {
.name = "Hauppauge Okemo-B",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw",
},
[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
.name = "Hauppauge WinTV MiniStick",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_ISDBT_BDA] = "sms1xxx-hcw-55xxx-isdbt-02.fw",
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
.rc_codes = RC_MAP_HAUPPAUGE,
.board_cfg.leds_power = 26,
.board_cfg.led0 = 27,
.board_cfg.led1 = 28,
.board_cfg.ir = 9,
.led_power = 26,
.led_lo = 27,
.led_hi = 28,
},
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = {
.name = "Hauppauge WinTV MiniCard",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
.lna_ctrl = 29,
.board_cfg.foreign_lna0_ctrl = 29,
.rf_switch = 17,
.board_cfg.rf_switch_uhf = 17,
},
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
.name = "Hauppauge WinTV MiniCard",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
.lna_ctrl = -1,
},
[SMS1XXX_BOARD_SIANO_NICE] = {
/* 11 */
.name = "Siano Nice Digital Receiver",
.type = SMS_NOVA_B0,
},
[SMS1XXX_BOARD_SIANO_VENICE] = {
/* 12 */
.name = "Siano Venice Digital Receiver",
.type = SMS_VEGA,
},
};
struct sms_board *sms_get_board(unsigned id)
{
BUG_ON(id >= ARRAY_SIZE(sms_boards));
return &sms_boards[id];
}
EXPORT_SYMBOL_GPL(sms_get_board);
static inline void sms_gpio_assign_11xx_default_led_config(
struct smscore_gpio_config *pGpioConfig) {
pGpioConfig->Direction = SMS_GPIO_DIRECTION_OUTPUT;
pGpioConfig->InputCharacteristics =
SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL;
pGpioConfig->OutputDriving = SMS_GPIO_OUTPUT_DRIVING_4mA;
pGpioConfig->OutputSlewRate = SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS;
pGpioConfig->PullUpDown = SMS_GPIO_PULL_UP_DOWN_NONE;
}
int sms_board_event(struct smscore_device_t *coredev,
enum SMS_BOARD_EVENTS gevent) {
struct smscore_gpio_config MyGpioConfig;
sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
switch (gevent) {
case BOARD_EVENT_POWER_INIT: /* including hotplug */
break; /* BOARD_EVENT_BIND */
case BOARD_EVENT_POWER_SUSPEND:
break; /* BOARD_EVENT_POWER_SUSPEND */
case BOARD_EVENT_POWER_RESUME:
break; /* BOARD_EVENT_POWER_RESUME */
case BOARD_EVENT_BIND:
break; /* BOARD_EVENT_BIND */
case BOARD_EVENT_SCAN_PROG:
break; /* BOARD_EVENT_SCAN_PROG */
case BOARD_EVENT_SCAN_COMP:
break; /* BOARD_EVENT_SCAN_COMP */
case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
case BOARD_EVENT_FE_LOCK:
break; /* BOARD_EVENT_FE_LOCK */
case BOARD_EVENT_FE_UNLOCK:
break; /* BOARD_EVENT_FE_UNLOCK */
case BOARD_EVENT_DEMOD_LOCK:
break; /* BOARD_EVENT_DEMOD_LOCK */
case BOARD_EVENT_DEMOD_UNLOCK:
break; /* BOARD_EVENT_DEMOD_UNLOCK */
case BOARD_EVENT_RECEPTION_MAX_4:
break; /* BOARD_EVENT_RECEPTION_MAX_4 */
case BOARD_EVENT_RECEPTION_3:
break; /* BOARD_EVENT_RECEPTION_3 */
case BOARD_EVENT_RECEPTION_2:
break; /* BOARD_EVENT_RECEPTION_2 */
case BOARD_EVENT_RECEPTION_1:
break; /* BOARD_EVENT_RECEPTION_1 */
case BOARD_EVENT_RECEPTION_LOST_0:
break; /* BOARD_EVENT_RECEPTION_LOST_0 */
case BOARD_EVENT_MULTIPLEX_OK:
break; /* BOARD_EVENT_MULTIPLEX_OK */
case BOARD_EVENT_MULTIPLEX_ERRORS:
break; /* BOARD_EVENT_MULTIPLEX_ERRORS */
default:
sms_err("Unknown SMS board event");
break;
}
return 0;
}
EXPORT_SYMBOL_GPL(sms_board_event);
static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable)
{
int lvl, ret;
u32 gpio;
struct smscore_config_gpio gpioconfig = {
.direction = SMS_GPIO_DIRECTION_OUTPUT,
.pullupdown = SMS_GPIO_PULLUPDOWN_NONE,
.inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL,
.outputslewrate = SMS_GPIO_OUTPUTSLEWRATE_FAST,
.outputdriving = SMS_GPIO_OUTPUTDRIVING_4mA,
};
if (pin == 0)
return -EINVAL;
if (pin < 0) {
/* inverted gpio */
gpio = pin * -1;
lvl = enable ? 0 : 1;
} else {
gpio = pin;
lvl = enable ? 1 : 0;
}
ret = smscore_configure_gpio(coredev, gpio, &gpioconfig);
if (ret < 0)
return ret;
return smscore_set_gpio(coredev, gpio, lvl);
}
int sms_board_setup(struct smscore_device_t *coredev)
{
int board_id = smscore_get_board_id(coredev);
struct sms_board *board = sms_get_board(board_id);
switch (board_id) {
case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
/* turn off all LEDs */
sms_set_gpio(coredev, board->led_power, 0);
sms_set_gpio(coredev, board->led_hi, 0);
sms_set_gpio(coredev, board->led_lo, 0);
break;
case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
/* turn off LNA */
sms_set_gpio(coredev, board->lna_ctrl, 0);
break;
}
return 0;
}
EXPORT_SYMBOL_GPL(sms_board_setup);
int sms_board_power(struct smscore_device_t *coredev, int onoff)
{
int board_id = smscore_get_board_id(coredev);
struct sms_board *board = sms_get_board(board_id);
switch (board_id) {
case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
/* power LED */
sms_set_gpio(coredev,
board->led_power, onoff ? 1 : 0);
break;
case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
/* LNA */
if (!onoff)
sms_set_gpio(coredev, board->lna_ctrl, 0);
break;
}
return 0;
}
EXPORT_SYMBOL_GPL(sms_board_power);
int sms_board_led_feedback(struct smscore_device_t *coredev, int led)
{
int board_id = smscore_get_board_id(coredev);
struct sms_board *board = sms_get_board(board_id);
/* dont touch GPIO if LEDs are already set */
if (smscore_led_state(coredev, -1) == led)
return 0;
switch (board_id) {
case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
sms_set_gpio(coredev,
board->led_lo, (led & SMS_LED_LO) ? 1 : 0);
sms_set_gpio(coredev,
board->led_hi, (led & SMS_LED_HI) ? 1 : 0);
smscore_led_state(coredev, led);
break;
}
return 0;
}
EXPORT_SYMBOL_GPL(sms_board_led_feedback);
int sms_board_lna_control(struct smscore_device_t *coredev, int onoff)
{
int board_id = smscore_get_board_id(coredev);
struct sms_board *board = sms_get_board(board_id);
sms_debug("%s: LNA %s", __func__, onoff ? "enabled" : "disabled");
switch (board_id) {
case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
sms_set_gpio(coredev,
board->rf_switch, onoff ? 1 : 0);
return sms_set_gpio(coredev,
board->lna_ctrl, onoff ? 1 : 0);
}
return -EINVAL;
}
EXPORT_SYMBOL_GPL(sms_board_lna_control);
int sms_board_load_modules(int id)
{
switch (id) {
case SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT:
case SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A:
case SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B:
case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
request_module("smsdvb");
break;
default:
/* do nothing */
break;
}
return 0;
}
EXPORT_SYMBOL_GPL(sms_board_load_modules);