linux/include/net/dsa.h
Florian Fainelli badf3ada60 net: dsa: Provide CPU port statistics to master netdev
This patch overloads the DSA master netdev, aka CPU Ethernet MAC to also
include switch-side statistics, which is useful for debugging purposes,
when the switch is not properly connected to the Ethernet MAC (duplex
mismatch, (RG)MII electrical issues etc.).

We accomplish this by retaining the original copy of the master netdev's
ethtool_ops, and just overload the 3 operations we care about:
get_sset_count, get_strings and get_ethtool_stats so as to intercept
these calls and call into the original master_netdev ethtool_ops, plus
our own.

We take this approach as opposed to providing a set of DSA helper
functions that would retrive the CPU port's statistics, because the
entire purpose of DSA is to allow unmodified Ethernet MAC drivers to be
used as CPU conduit interfaces, therefore, statistics overlay in such
drivers would simply not scale.

The new ethtool -S <iface> output would therefore look like this now:
<iface> statistics
p<2 digits cpu port number>_<switch MIB counter names>

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28 17:16:17 -04:00

359 lines
9.1 KiB
C

/*
* include/net/dsa.h - Driver for Distributed Switch Architecture switch chips
* Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __LINUX_NET_DSA_H
#define __LINUX_NET_DSA_H
#include <linux/if_ether.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/ethtool.h>
enum dsa_tag_protocol {
DSA_TAG_PROTO_NONE = 0,
DSA_TAG_PROTO_DSA,
DSA_TAG_PROTO_TRAILER,
DSA_TAG_PROTO_EDSA,
DSA_TAG_PROTO_BRCM,
};
#define DSA_MAX_SWITCHES 4
#define DSA_MAX_PORTS 12
struct dsa_chip_data {
/*
* How to access the switch configuration registers.
*/
struct device *host_dev;
int sw_addr;
/* set to size of eeprom if supported by the switch */
int eeprom_len;
/* Device tree node pointer for this specific switch chip
* used during switch setup in case additional properties
* and resources needs to be used
*/
struct device_node *of_node;
/*
* The names of the switch's ports. Use "cpu" to
* designate the switch port that the cpu is connected to,
* "dsa" to indicate that this port is a DSA link to
* another switch, NULL to indicate the port is unused,
* or any other string to indicate this is a physical port.
*/
char *port_names[DSA_MAX_PORTS];
struct device_node *port_dn[DSA_MAX_PORTS];
/*
* An array (with nr_chips elements) of which element [a]
* indicates which port on this switch should be used to
* send packets to that are destined for switch a. Can be
* NULL if there is only one switch chip.
*/
s8 *rtable;
/*
* A switch may have a GPIO line tied to its reset pin. Parse
* this from the device tree, and use it before performing
* switch soft reset.
*/
struct gpio_desc *reset;
};
struct dsa_platform_data {
/*
* Reference to a Linux network interface that connects
* to the root switch chip of the tree.
*/
struct device *netdev;
struct net_device *of_netdev;
/*
* Info structs describing each of the switch chips
* connected via this network interface.
*/
int nr_chips;
struct dsa_chip_data *chip;
};
struct packet_type;
struct dsa_switch_tree {
/*
* Configuration data for the platform device that owns
* this dsa switch tree instance.
*/
struct dsa_platform_data *pd;
/*
* Reference to network device to use, and which tagging
* protocol to use.
*/
struct net_device *master_netdev;
int (*rcv)(struct sk_buff *skb,
struct net_device *dev,
struct packet_type *pt,
struct net_device *orig_dev);
enum dsa_tag_protocol tag_protocol;
/*
* Original copy of the master netdev ethtool_ops
*/
struct ethtool_ops master_ethtool_ops;
/*
* The switch and port to which the CPU is attached.
*/
s8 cpu_switch;
s8 cpu_port;
/*
* Data for the individual switch chips.
*/
struct dsa_switch *ds[DSA_MAX_SWITCHES];
};
struct dsa_switch {
/*
* Parent switch tree, and switch index.
*/
struct dsa_switch_tree *dst;
int index;
/*
* Give the switch driver somewhere to hang its private data
* structure.
*/
void *priv;
/*
* Configuration data for this switch.
*/
struct dsa_chip_data *pd;
/*
* The used switch driver.
*/
struct dsa_switch_driver *drv;
/*
* Reference to host device to use.
*/
struct device *master_dev;
#ifdef CONFIG_NET_DSA_HWMON
/*
* Hardware monitoring information
*/
char hwmon_name[IFNAMSIZ + 8];
struct device *hwmon_dev;
#endif
/*
* Slave mii_bus and devices for the individual ports.
*/
u32 dsa_port_mask;
u32 enabled_port_mask;
u32 phys_mii_mask;
struct mii_bus *slave_mii_bus;
struct net_device *ports[DSA_MAX_PORTS];
};
static inline bool dsa_is_cpu_port(struct dsa_switch *ds, int p)
{
return !!(ds->index == ds->dst->cpu_switch && p == ds->dst->cpu_port);
}
static inline bool dsa_is_dsa_port(struct dsa_switch *ds, int p)
{
return !!((ds->dsa_port_mask) & (1 << p));
}
static inline bool dsa_is_port_initialized(struct dsa_switch *ds, int p)
{
return ds->enabled_port_mask & (1 << p) && ds->ports[p];
}
static inline u8 dsa_upstream_port(struct dsa_switch *ds)
{
struct dsa_switch_tree *dst = ds->dst;
/*
* If this is the root switch (i.e. the switch that connects
* to the CPU), return the cpu port number on this switch.
* Else return the (DSA) port number that connects to the
* switch that is one hop closer to the cpu.
*/
if (dst->cpu_switch == ds->index)
return dst->cpu_port;
else
return ds->pd->rtable[dst->cpu_switch];
}
struct switchdev_trans;
struct switchdev_obj;
struct switchdev_obj_port_fdb;
struct switchdev_obj_port_vlan;
struct dsa_switch_driver {
struct list_head list;
enum dsa_tag_protocol tag_protocol;
/*
* Probing and setup.
*/
const char *(*probe)(struct device *dsa_dev,
struct device *host_dev, int sw_addr,
void **priv);
int (*setup)(struct dsa_switch *ds);
int (*set_addr)(struct dsa_switch *ds, u8 *addr);
u32 (*get_phy_flags)(struct dsa_switch *ds, int port);
/*
* Access to the switch's PHY registers.
*/
int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
int (*phy_write)(struct dsa_switch *ds, int port,
int regnum, u16 val);
/*
* Link state adjustment (called from libphy)
*/
void (*adjust_link)(struct dsa_switch *ds, int port,
struct phy_device *phydev);
void (*fixed_link_update)(struct dsa_switch *ds, int port,
struct fixed_phy_status *st);
/*
* ethtool hardware statistics.
*/
void (*get_strings)(struct dsa_switch *ds, int port, uint8_t *data);
void (*get_ethtool_stats)(struct dsa_switch *ds,
int port, uint64_t *data);
int (*get_sset_count)(struct dsa_switch *ds);
/*
* ethtool Wake-on-LAN
*/
void (*get_wol)(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *w);
int (*set_wol)(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *w);
/*
* Suspend and resume
*/
int (*suspend)(struct dsa_switch *ds);
int (*resume)(struct dsa_switch *ds);
/*
* Port enable/disable
*/
int (*port_enable)(struct dsa_switch *ds, int port,
struct phy_device *phy);
void (*port_disable)(struct dsa_switch *ds, int port,
struct phy_device *phy);
/*
* EEE setttings
*/
int (*set_eee)(struct dsa_switch *ds, int port,
struct phy_device *phydev,
struct ethtool_eee *e);
int (*get_eee)(struct dsa_switch *ds, int port,
struct ethtool_eee *e);
#ifdef CONFIG_NET_DSA_HWMON
/* Hardware monitoring */
int (*get_temp)(struct dsa_switch *ds, int *temp);
int (*get_temp_limit)(struct dsa_switch *ds, int *temp);
int (*set_temp_limit)(struct dsa_switch *ds, int temp);
int (*get_temp_alarm)(struct dsa_switch *ds, bool *alarm);
#endif
/* EEPROM access */
int (*get_eeprom_len)(struct dsa_switch *ds);
int (*get_eeprom)(struct dsa_switch *ds,
struct ethtool_eeprom *eeprom, u8 *data);
int (*set_eeprom)(struct dsa_switch *ds,
struct ethtool_eeprom *eeprom, u8 *data);
/*
* Register access.
*/
int (*get_regs_len)(struct dsa_switch *ds, int port);
void (*get_regs)(struct dsa_switch *ds, int port,
struct ethtool_regs *regs, void *p);
/*
* Bridge integration
*/
int (*port_bridge_join)(struct dsa_switch *ds, int port,
struct net_device *bridge);
void (*port_bridge_leave)(struct dsa_switch *ds, int port);
void (*port_stp_state_set)(struct dsa_switch *ds, int port,
u8 state);
/*
* VLAN support
*/
int (*port_vlan_filtering)(struct dsa_switch *ds, int port,
bool vlan_filtering);
int (*port_vlan_prepare)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
void (*port_vlan_add)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
int (*port_vlan_del)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan);
int (*port_vlan_dump)(struct dsa_switch *ds, int port,
struct switchdev_obj_port_vlan *vlan,
int (*cb)(struct switchdev_obj *obj));
/*
* Forwarding database
*/
int (*port_fdb_prepare)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans);
void (*port_fdb_add)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans);
int (*port_fdb_del)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb);
int (*port_fdb_dump)(struct dsa_switch *ds, int port,
struct switchdev_obj_port_fdb *fdb,
int (*cb)(struct switchdev_obj *obj));
};
void register_switch_driver(struct dsa_switch_driver *type);
void unregister_switch_driver(struct dsa_switch_driver *type);
struct mii_bus *dsa_host_dev_to_mii_bus(struct device *dev);
static inline void *ds_to_priv(struct dsa_switch *ds)
{
return ds->priv;
}
static inline bool dsa_uses_tagged_protocol(struct dsa_switch_tree *dst)
{
return dst->rcv != NULL;
}
#endif