linux/include/scsi
Vasu Dev c826a31457 [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status
frames followed by these errors in log.

	[sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
	[sdp] Sense Key : Aborted Command [current]
	[sdp] Add. Sense: Data phase error

This was causing some test apps to exit due to write failure under heavy
load.

This was due to a race around adding and removing tx frame skb in
fcoe_pending_queue, Chris Leech helped me to find that brief unlocking
period when pulling skb from fcoe_pending_queue in various contexts
(fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue
up on a failed fcoe_start_io could change skb/tx frame order in
fcoe_pending_queue. Thanks Chris.

This patch allows only single context to pull skb from fcoe_pending_queue
at any time to prevent above described ordering issue/race by use of
fcoe_pending_queue_active flag.

This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by
use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals
to clear and set lp->qfull.

I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH  will work better
in re/setting lp->qfull and these could be fine tuned for performance.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:09:21 -05:00
..
fc [SCSI] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway 2009-03-10 09:07:09 -05:00
fc_encode.h [SCSI] libfc: A modular Fibre Channel library 2008-12-29 11:24:33 -06:00
fc_frame.h [SCSI] libfc: A modular Fibre Channel library 2008-12-29 11:24:33 -06:00
fc_transport_fcoe.h [SCSI] fcoe: Fibre Channel over Ethernet 2008-12-29 11:24:33 -06:00
iscsi_if.h [SCSI] libiscsi_tcp: support padding offload 2008-12-29 11:24:23 -06:00
iscsi_proto.h [SCSI] iscsi_tcp: Enable any size command 2008-07-12 08:22:23 -05:00
libfc.h [SCSI] libfc, fcoe: Fix kerneldoc comments 2009-03-10 09:04:40 -05:00
libfcoe.h [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status 2009-03-10 09:09:21 -05:00
libiscsi_tcp.h [SCSI] iscsi_tcp: make padbuf non-static 2009-01-13 10:41:34 -06:00
libiscsi.h [SCSI] libiscsi: allow drivers to modify the itt sent to the target 2008-12-29 11:24:22 -06:00
libsas.h include: Remove unnecessary inclusions of asm/semaphore.h 2008-04-18 22:16:54 -04:00
libsrp.h
sas_ata.h [SCSI] libsas: fix missing inlines in header file 2008-04-07 12:19:10 -05:00
sas.h [SCSI] libsas: Convert sas_proto users to sas_protocol 2008-01-11 18:22:41 -06:00
scsi_cmnd.h block: unify request timeout handling 2008-10-09 08:56:13 +02:00
scsi_dbg.h
scsi_device.h [SCSI] add residual argument to scsi_execute and scsi_execute_req 2008-12-29 11:24:24 -06:00
scsi_devinfo.h
scsi_dh.h [SCSI] scsi_dh: attach to hardware handler from dm-mpath 2008-07-26 15:14:53 -04:00
scsi_driver.h Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done"" 2008-01-06 10:17:12 -08:00
scsi_eh.h [SCSI] scsi_eh_prep_cmnd should save scmd->underflow 2008-07-26 15:14:56 -04:00
scsi_host.h block: unify request timeout handling 2008-10-09 08:56:13 +02:00
scsi_ioctl.h [PATCH] don't mess with file in scsi_nonblockable_ioctl() 2008-10-21 07:47:28 -04:00
scsi_netlink_fc.h
scsi_netlink.h [SCSI] scsi_netlink: Add transport and LLD recieve and event support 2008-10-03 11:46:13 -05:00
scsi_tcq.h scsi: make sure that scsi_init_shared_tag_map() doesn't overwrite existing map 2008-10-27 19:25:30 +01:00
scsi_tgt_if.h
scsi_tgt.h
scsi_transport_fc.h [SCSI] fc transport: restore missing dev_loss_tmo callback to LLDD 2009-01-06 09:43:33 -06:00
scsi_transport_iscsi.h [SCSI] libiscsi: pass opcode into alloc_pdu callout 2008-12-29 11:24:23 -06:00
scsi_transport_sas.h SCSI: convert struct class_device to struct device 2008-04-19 19:10:33 -07:00
scsi_transport_spi.h
scsi_transport_srp.h
scsi_transport.h block: unify request timeout handling 2008-10-09 08:56:13 +02:00
scsi.h [SCSI] scsi: add transport host byte errors (v3) 2008-10-13 09:28:48 -04:00
scsicam.h
sg.h [SCSI] sg: Add target reset support 2008-07-12 08:22:32 -05:00
srp.h