linux/drivers/scsi/qla2xxx/qla_inline.h
Quinn Tran 99e1b683c4 scsi: qla2xxx: Add ql2xiniexchg parameter
Previously, the ql2xexchoffld module parameter was used to control the
max number of exchanges to be offload onto host memory.

Module parameter ql_dm_tgt_ex_pct was used to control the percentage of
exchanges allocated to the Target side.

With this patch, module parameter ql_dm_tgt_ex_pct is no longer used to
control exchanges for the driver. New module parameter ql2xiniexchg is
added to control exchanges between target mode and initiator mode.

With the updated module parameters, users can control the exact number
of exchanges for either Initiator or Target. The exchange offload
feature will be automatically enabled when the total number of exchanges
exceeds 2048 limit.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:07 -04:00

326 lines
7.2 KiB
C

/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2014 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_target.h"
/**
* qla24xx_calc_iocbs() - Determine number of Command Type 3 and
* Continuation Type 1 IOCBs to allocate.
*
* @dsds: number of data segment decriptors needed
*
* Returns the number of IOCB entries needed to store @dsds.
*/
static inline uint16_t
qla24xx_calc_iocbs(scsi_qla_host_t *vha, uint16_t dsds)
{
uint16_t iocbs;
iocbs = 1;
if (dsds > 1) {
iocbs += (dsds - 1) / 5;
if ((dsds - 1) % 5)
iocbs++;
}
return iocbs;
}
/*
* qla2x00_debounce_register
* Debounce register.
*
* Input:
* port = register address.
*
* Returns:
* register value.
*/
static __inline__ uint16_t
qla2x00_debounce_register(volatile uint16_t __iomem *addr)
{
volatile uint16_t first;
volatile uint16_t second;
do {
first = RD_REG_WORD(addr);
barrier();
cpu_relax();
second = RD_REG_WORD(addr);
} while (first != second);
return (first);
}
static inline void
qla2x00_poll(struct rsp_que *rsp)
{
unsigned long flags;
struct qla_hw_data *ha = rsp->hw;
local_irq_save(flags);
if (IS_P3P_TYPE(ha))
qla82xx_poll(0, rsp);
else
ha->isp_ops->intr_handler(0, rsp);
local_irq_restore(flags);
}
static inline uint8_t *
host_to_fcp_swap(uint8_t *fcp, uint32_t bsize)
{
uint32_t *ifcp = (uint32_t *) fcp;
uint32_t *ofcp = (uint32_t *) fcp;
uint32_t iter = bsize >> 2;
for (; iter ; iter--)
*ofcp++ = swab32(*ifcp++);
return fcp;
}
static inline void
host_to_adap(uint8_t *src, uint8_t *dst, uint32_t bsize)
{
uint32_t *isrc = (uint32_t *) src;
__le32 *odest = (__le32 *) dst;
uint32_t iter = bsize >> 2;
for ( ; iter--; isrc++)
*odest++ = cpu_to_le32(*isrc);
}
static inline void
qla2x00_set_reserved_loop_ids(struct qla_hw_data *ha)
{
int i;
if (IS_FWI2_CAPABLE(ha))
return;
for (i = 0; i < SNS_FIRST_LOOP_ID; i++)
set_bit(i, ha->loop_id_map);
set_bit(MANAGEMENT_SERVER, ha->loop_id_map);
set_bit(BROADCAST, ha->loop_id_map);
}
static inline int
qla2x00_is_reserved_id(scsi_qla_host_t *vha, uint16_t loop_id)
{
struct qla_hw_data *ha = vha->hw;
if (IS_FWI2_CAPABLE(ha))
return (loop_id > NPH_LAST_HANDLE);
return ((loop_id > ha->max_loop_id && loop_id < SNS_FIRST_LOOP_ID) ||
loop_id == MANAGEMENT_SERVER || loop_id == BROADCAST);
}
static inline void
qla2x00_clear_loop_id(fc_port_t *fcport) {
struct qla_hw_data *ha = fcport->vha->hw;
if (fcport->loop_id == FC_NO_LOOP_ID ||
qla2x00_is_reserved_id(fcport->vha, fcport->loop_id))
return;
clear_bit(fcport->loop_id, ha->loop_id_map);
fcport->loop_id = FC_NO_LOOP_ID;
}
static inline void
qla2x00_clean_dsd_pool(struct qla_hw_data *ha, struct crc_context *ctx)
{
struct dsd_dma *dsd, *tdsd;
/* clean up allocated prev pool */
list_for_each_entry_safe(dsd, tdsd, &ctx->dsd_list, list) {
dma_pool_free(ha->dl_dma_pool, dsd->dsd_addr,
dsd->dsd_list_dma);
list_del(&dsd->list);
kfree(dsd);
}
INIT_LIST_HEAD(&ctx->dsd_list);
}
static inline void
qla2x00_set_fcport_state(fc_port_t *fcport, int state)
{
int old_state;
old_state = atomic_read(&fcport->state);
atomic_set(&fcport->state, state);
/* Don't print state transitions during initial allocation of fcport */
if (old_state && old_state != state) {
ql_dbg(ql_dbg_disc, fcport->vha, 0x207d,
"FCPort %8phC state transitioned from %s to %s - "
"portid=%02x%02x%02x.\n", fcport->port_name,
port_state_str[old_state], port_state_str[state],
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
}
}
static inline int
qla2x00_hba_err_chk_enabled(srb_t *sp)
{
/*
* Uncomment when corresponding SCSI changes are done.
*
if (!sp->cmd->prot_chk)
return 0;
*
*/
switch (scsi_get_prot_op(GET_CMD_SP(sp))) {
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
if (ql2xenablehba_err_chk >= 1)
return 1;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
if (ql2xenablehba_err_chk >= 2)
return 1;
break;
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
return 1;
}
return 0;
}
static inline int
qla2x00_reset_active(scsi_qla_host_t *vha)
{
scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
/* Test appropriate base-vha and vha flags. */
return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
}
static inline srb_t *
qla2xxx_get_qpair_sp(struct qla_qpair *qpair, fc_port_t *fcport, gfp_t flag)
{
srb_t *sp = NULL;
uint8_t bail;
QLA_QPAIR_MARK_BUSY(qpair, bail);
if (unlikely(bail))
return NULL;
sp = mempool_alloc(qpair->srb_mempool, flag);
if (!sp)
goto done;
memset(sp, 0, sizeof(*sp));
sp->fcport = fcport;
sp->iocbs = 1;
sp->vha = qpair->vha;
done:
if (!sp)
QLA_QPAIR_MARK_NOT_BUSY(qpair);
return sp;
}
static inline void
qla2xxx_rel_qpair_sp(struct qla_qpair *qpair, srb_t *sp)
{
mempool_free(sp, qpair->srb_mempool);
QLA_QPAIR_MARK_NOT_BUSY(qpair);
}
static inline srb_t *
qla2x00_get_sp(scsi_qla_host_t *vha, fc_port_t *fcport, gfp_t flag)
{
srb_t *sp = NULL;
uint8_t bail;
QLA_VHA_MARK_BUSY(vha, bail);
if (unlikely(bail))
return NULL;
sp = mempool_alloc(vha->hw->srb_mempool, flag);
if (!sp)
goto done;
memset(sp, 0, sizeof(*sp));
sp->fcport = fcport;
sp->iocbs = 1;
sp->vha = vha;
done:
if (!sp)
QLA_VHA_MARK_NOT_BUSY(vha);
return sp;
}
static inline void
qla2x00_rel_sp(srb_t *sp)
{
QLA_VHA_MARK_NOT_BUSY(sp->vha);
mempool_free(sp, sp->vha->hw->srb_mempool);
}
static inline void
qla2x00_init_timer(srb_t *sp, unsigned long tmo)
{
init_timer(&sp->u.iocb_cmd.timer);
sp->u.iocb_cmd.timer.expires = jiffies + tmo * HZ;
sp->u.iocb_cmd.timer.data = (unsigned long)sp;
sp->u.iocb_cmd.timer.function = qla2x00_sp_timeout;
add_timer(&sp->u.iocb_cmd.timer);
sp->free = qla2x00_sp_free;
if (IS_QLAFX00(sp->vha->hw) && (sp->type == SRB_FXIOCB_DCMD))
init_completion(&sp->u.iocb_cmd.u.fxiocb.fxiocb_comp);
if (sp->type == SRB_ELS_DCMD)
init_completion(&sp->u.iocb_cmd.u.els_logo.comp);
}
static inline int
qla2x00_gid_list_size(struct qla_hw_data *ha)
{
if (IS_QLAFX00(ha))
return sizeof(uint32_t) * 32;
else
return sizeof(struct gid_list_info) * ha->max_fibre_devices;
}
static inline void
qla2x00_handle_mbx_completion(struct qla_hw_data *ha, int status)
{
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
complete(&ha->mbx_intr_comp);
}
}
static inline void
qla2x00_set_retry_delay_timestamp(fc_port_t *fcport, uint16_t retry_delay)
{
if (retry_delay)
fcport->retry_delay_timestamp = jiffies +
(retry_delay * HZ / 10);
}
static inline bool
qla_is_exch_offld_enabled(struct scsi_qla_host *vha)
{
if (qla_ini_mode_enabled(vha) &&
(ql2xiniexchg > FW_DEF_EXCHANGES_CNT))
return true;
else if (qla_tgt_mode_enabled(vha) &&
(ql2xexchoffld > FW_DEF_EXCHANGES_CNT))
return true;
else if (qla_dual_mode_enabled(vha) &&
((ql2xiniexchg + ql2xexchoffld) > FW_DEF_EXCHANGES_CNT))
return true;
else
return false;
}