forked from Minki/linux
89ce43fbbc
The TWL6025 was never released beyond sample form and was replaced by the PhoenixLite range of chips - TWL6032. Change the references to reference the TWL6032 class and name the registers to twl6032 in line with an actual released chip name to avoid confusion. Currently there are no users of TWL6025 in the code. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviwed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
41 lines
1.4 KiB
Plaintext
41 lines
1.4 KiB
Plaintext
USB COMPARATOR OF TWL CHIPS
|
|
|
|
TWL6030 USB COMPARATOR
|
|
- compatible : Should be "ti,twl6030-usb"
|
|
- interrupts : Two interrupt numbers to the cpu should be specified. First
|
|
interrupt number is the otg interrupt number that raises ID interrupts when
|
|
the controller has to act as host and the second interrupt number is the
|
|
usb interrupt number that raises VBUS interrupts when the controller has to
|
|
act as device
|
|
- usb-supply : phandle to the regulator device tree node. It should be vusb
|
|
if it is twl6030 or ldousb if it is twl6032 subclass.
|
|
|
|
twl6030-usb {
|
|
compatible = "ti,twl6030-usb";
|
|
interrupts = < 4 10 >;
|
|
};
|
|
|
|
Board specific device node entry
|
|
&twl6030-usb {
|
|
usb-supply = <&vusb>;
|
|
};
|
|
|
|
TWL4030 USB PHY AND COMPARATOR
|
|
- compatible : Should be "ti,twl4030-usb"
|
|
- interrupts : The interrupt numbers to the cpu should be specified. First
|
|
interrupt number is the otg interrupt number that raises ID interrupts
|
|
and VBUS interrupts. The second interrupt number is optional.
|
|
- <supply-name>-supply : phandle to the regulator device tree node.
|
|
<supply-name> should be vusb1v5, vusb1v8 and vusb3v1
|
|
- usb_mode : The mode used by the phy to connect to the controller. "1"
|
|
specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
|
|
|
|
twl4030-usb {
|
|
compatible = "ti,twl4030-usb";
|
|
interrupts = < 10 4 >;
|
|
usb1v5-supply = <&vusb1v5>;
|
|
usb1v8-supply = <&vusb1v8>;
|
|
usb3v1-supply = <&vusb3v1>;
|
|
usb_mode = <1>;
|
|
};
|