forked from Minki/linux
cda13dd164
This patch converts the remaining 83xx boards to the dts-v1 format. This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx, mpc8349emitxgp and the mpc836x_mds. The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already dts-v1 and only undergo minor changes for the sake of formatting consistency across the whole group of boards; i.e. the idea being that you can do a "diff -u board_A.dts board_B.dts" and see something meaningful. The general rule I've applied is that entries for values normally parsed by humans are left in decimal (i.e. IRQ, cache size, clock rates, basic counts and indexes) and all other data (i.e. reg and ranges, IRQ flags etc.) remain in hex. I've used dtc to confirm that the output prior to this changeset matches the output after this changeset is applied for all boards. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
245 lines
5.4 KiB
Plaintext
245 lines
5.4 KiB
Plaintext
/*
|
|
* SBC8349E Device Tree Source
|
|
*
|
|
* Copyright 2007 Wind River Inc.
|
|
*
|
|
* Paul Gortmaker (see MAINTAINERS for contact information)
|
|
*
|
|
* -based largely on the Freescale MPC834x_MDS dts.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "SBC8349E";
|
|
compatible = "SBC834xE";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8349@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-line-size = <32>;
|
|
d-cache-size = <32768>;
|
|
i-cache-size = <32768>;
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>; // 256MB at 0
|
|
};
|
|
|
|
soc8349@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
|
reg = <0xe0000000 0x00000200>;
|
|
bus-frequency = <0>;
|
|
|
|
wdt@200 {
|
|
compatible = "mpc83xx_wdt";
|
|
reg = <0x200 0x100>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <15 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
spi@7000 {
|
|
cell-index = <0>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x7000 0x1000>;
|
|
interrupts = <16 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
/* phy type (ULPI or SERIAL) are only types supported for MPH */
|
|
/* port = 0 or 1 */
|
|
usb@22000 {
|
|
compatible = "fsl-usb2-mph";
|
|
reg = <0x22000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <39 0x8>;
|
|
phy_type = "ulpi";
|
|
port1;
|
|
};
|
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
|
usb@23000 {
|
|
device_type = "usb";
|
|
compatible = "fsl-usb2-dr";
|
|
reg = <0x23000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <38 0x8>;
|
|
dr_mode = "otg";
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
mdio@24520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
reg = <0x24520 0x20>;
|
|
|
|
phy0: ethernet-phy@19 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <20 0x8>;
|
|
reg = <0x19>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy1: ethernet-phy@1a {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <21 0x8>;
|
|
reg = <0x1a>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x24000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <32 0x8 33 0x8 34 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
phy-handle = <&phy0>;
|
|
linux,network-index = <0>;
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
cell-index = <1>;
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x25000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <35 0x8 36 0x8 37 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
phy-handle = <&phy1>;
|
|
linux,network-index = <1>;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <10 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
/* May need to remove if on a part without crypto engine */
|
|
crypto@30000 {
|
|
model = "SEC2";
|
|
compatible = "talitos";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <11 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
num-channels = <4>;
|
|
channel-fifo-len = <24>;
|
|
exec-units-mask = <0x0000007e>;
|
|
/* desc mask is for rev2.0,
|
|
* we need runtime fixup for >2.0 */
|
|
descriptor-types-mask = <0x01010ebf>;
|
|
};
|
|
|
|
/* IPIC
|
|
* interrupts cell = <intr #, sense>
|
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
|
* sense == 8: Level, low assertion
|
|
* sense == 2: Edge, high-to-low change
|
|
*/
|
|
ipic: pic@700 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x700 0x100>;
|
|
device_type = "ipic";
|
|
};
|
|
};
|
|
|
|
pci0: pci@e0008500 {
|
|
cell-index = <1>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x11 */
|
|
0x8800 0x0 0x0 0x1 &ipic 20 0x8
|
|
0x8800 0x0 0x0 0x2 &ipic 21 0x8
|
|
0x8800 0x0 0x0 0x3 &ipic 22 0x8
|
|
0x8800 0x0 0x0 0x4 &ipic 23 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <0x42 0x8>;
|
|
bus-range = <0 0>;
|
|
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
|
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
|
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
|
|
clock-frequency = <66666666>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe0008500 0x100>;
|
|
compatible = "fsl,mpc8349-pci";
|
|
device_type = "pci";
|
|
};
|
|
};
|