forked from Minki/linux
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
645 lines
14 KiB
C
645 lines
14 KiB
C
/*
|
|
* Block driver for media (i.e., flash cards)
|
|
*
|
|
* Copyright 2002 Hewlett-Packard Company
|
|
*
|
|
* Use consistent with the GNU GPL is permitted,
|
|
* provided that this copyright notice is
|
|
* preserved in its entirety in all copies and derived works.
|
|
*
|
|
* HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
|
|
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
|
|
* FITNESS FOR ANY PARTICULAR PURPOSE.
|
|
*
|
|
* Many thanks to Alessandro Rubini and Jonathan Corbet!
|
|
*
|
|
* Author: Andrew Christian
|
|
* 28 May 2002
|
|
*/
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/protocol.h>
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "mmc_queue.h"
|
|
|
|
/*
|
|
* max 8 partitions per card
|
|
*/
|
|
#define MMC_SHIFT 3
|
|
|
|
static int major;
|
|
|
|
/*
|
|
* There is one mmc_blk_data per slot.
|
|
*/
|
|
struct mmc_blk_data {
|
|
spinlock_t lock;
|
|
struct gendisk *disk;
|
|
struct mmc_queue queue;
|
|
|
|
unsigned int usage;
|
|
unsigned int block_bits;
|
|
unsigned int read_only;
|
|
};
|
|
|
|
static DEFINE_MUTEX(open_lock);
|
|
|
|
static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
|
|
mutex_lock(&open_lock);
|
|
md = disk->private_data;
|
|
if (md && md->usage == 0)
|
|
md = NULL;
|
|
if (md)
|
|
md->usage++;
|
|
mutex_unlock(&open_lock);
|
|
|
|
return md;
|
|
}
|
|
|
|
static void mmc_blk_put(struct mmc_blk_data *md)
|
|
{
|
|
mutex_lock(&open_lock);
|
|
md->usage--;
|
|
if (md->usage == 0) {
|
|
put_disk(md->disk);
|
|
kfree(md);
|
|
}
|
|
mutex_unlock(&open_lock);
|
|
}
|
|
|
|
static int mmc_blk_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
int ret = -ENXIO;
|
|
|
|
md = mmc_blk_get(inode->i_bdev->bd_disk);
|
|
if (md) {
|
|
if (md->usage == 2)
|
|
check_disk_change(inode->i_bdev);
|
|
ret = 0;
|
|
|
|
if ((filp->f_mode & FMODE_WRITE) && md->read_only)
|
|
ret = -EROFS;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_blk_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct mmc_blk_data *md = inode->i_bdev->bd_disk->private_data;
|
|
|
|
mmc_blk_put(md);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
|
|
{
|
|
geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16);
|
|
geo->heads = 4;
|
|
geo->sectors = 16;
|
|
return 0;
|
|
}
|
|
|
|
static struct block_device_operations mmc_bdops = {
|
|
.open = mmc_blk_open,
|
|
.release = mmc_blk_release,
|
|
.getgeo = mmc_blk_getgeo,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
struct mmc_blk_request {
|
|
struct mmc_request mrq;
|
|
struct mmc_command cmd;
|
|
struct mmc_command stop;
|
|
struct mmc_data data;
|
|
};
|
|
|
|
static int mmc_blk_prep_rq(struct mmc_queue *mq, struct request *req)
|
|
{
|
|
struct mmc_blk_data *md = mq->data;
|
|
int stat = BLKPREP_OK;
|
|
|
|
/*
|
|
* If we have no device, we haven't finished initialising.
|
|
*/
|
|
if (!md || !mq->card) {
|
|
printk(KERN_ERR "%s: killing request - no device/host\n",
|
|
req->rq_disk->disk_name);
|
|
stat = BLKPREP_KILL;
|
|
}
|
|
|
|
return stat;
|
|
}
|
|
|
|
static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
|
|
{
|
|
int err;
|
|
u32 blocks;
|
|
|
|
struct mmc_request mrq;
|
|
struct mmc_command cmd;
|
|
struct mmc_data data;
|
|
unsigned int timeout_us;
|
|
|
|
struct scatterlist sg;
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_APP_CMD;
|
|
cmd.arg = card->rca << 16;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
|
err = mmc_wait_for_cmd(card->host, &cmd, 0);
|
|
if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD))
|
|
return (u32)-1;
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = SD_APP_SEND_NUM_WR_BLKS;
|
|
cmd.arg = 0;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
|
|
memset(&data, 0, sizeof(struct mmc_data));
|
|
|
|
data.timeout_ns = card->csd.tacc_ns * 100;
|
|
data.timeout_clks = card->csd.tacc_clks * 100;
|
|
|
|
timeout_us = data.timeout_ns / 1000;
|
|
timeout_us += data.timeout_clks * 1000 /
|
|
(card->host->ios.clock / 1000);
|
|
|
|
if (timeout_us > 100000) {
|
|
data.timeout_ns = 100000000;
|
|
data.timeout_clks = 0;
|
|
}
|
|
|
|
data.blksz = 4;
|
|
data.blocks = 1;
|
|
data.flags = MMC_DATA_READ;
|
|
data.sg = &sg;
|
|
data.sg_len = 1;
|
|
|
|
memset(&mrq, 0, sizeof(struct mmc_request));
|
|
|
|
mrq.cmd = &cmd;
|
|
mrq.data = &data;
|
|
|
|
sg_init_one(&sg, &blocks, 4);
|
|
|
|
mmc_wait_for_req(card->host, &mrq);
|
|
|
|
if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE)
|
|
return (u32)-1;
|
|
|
|
blocks = ntohl(blocks);
|
|
|
|
return blocks;
|
|
}
|
|
|
|
static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
|
|
{
|
|
struct mmc_blk_data *md = mq->data;
|
|
struct mmc_card *card = md->queue.card;
|
|
struct mmc_blk_request brq;
|
|
int ret = 1;
|
|
|
|
if (mmc_card_claim_host(card))
|
|
goto flush_queue;
|
|
|
|
do {
|
|
struct mmc_command cmd;
|
|
u32 readcmd, writecmd;
|
|
|
|
memset(&brq, 0, sizeof(struct mmc_blk_request));
|
|
brq.mrq.cmd = &brq.cmd;
|
|
brq.mrq.data = &brq.data;
|
|
|
|
brq.cmd.arg = req->sector;
|
|
if (!mmc_card_blockaddr(card))
|
|
brq.cmd.arg <<= 9;
|
|
brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
brq.data.blksz = 1 << md->block_bits;
|
|
brq.stop.opcode = MMC_STOP_TRANSMISSION;
|
|
brq.stop.arg = 0;
|
|
brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
|
|
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
|
|
if (brq.data.blocks > card->host->max_blk_count)
|
|
brq.data.blocks = card->host->max_blk_count;
|
|
|
|
mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
|
|
|
|
/*
|
|
* If the host doesn't support multiple block writes, force
|
|
* block writes to single block. SD cards are excepted from
|
|
* this rule as they support querying the number of
|
|
* successfully written sectors.
|
|
*/
|
|
if (rq_data_dir(req) != READ &&
|
|
!(card->host->caps & MMC_CAP_MULTIWRITE) &&
|
|
!mmc_card_sd(card))
|
|
brq.data.blocks = 1;
|
|
|
|
if (brq.data.blocks > 1) {
|
|
brq.data.flags |= MMC_DATA_MULTI;
|
|
brq.mrq.stop = &brq.stop;
|
|
readcmd = MMC_READ_MULTIPLE_BLOCK;
|
|
writecmd = MMC_WRITE_MULTIPLE_BLOCK;
|
|
} else {
|
|
brq.mrq.stop = NULL;
|
|
readcmd = MMC_READ_SINGLE_BLOCK;
|
|
writecmd = MMC_WRITE_BLOCK;
|
|
}
|
|
|
|
if (rq_data_dir(req) == READ) {
|
|
brq.cmd.opcode = readcmd;
|
|
brq.data.flags |= MMC_DATA_READ;
|
|
} else {
|
|
brq.cmd.opcode = writecmd;
|
|
brq.data.flags |= MMC_DATA_WRITE;
|
|
}
|
|
|
|
brq.data.sg = mq->sg;
|
|
brq.data.sg_len = blk_rq_map_sg(req->q, req, brq.data.sg);
|
|
|
|
mmc_wait_for_req(card->host, &brq.mrq);
|
|
if (brq.cmd.error) {
|
|
printk(KERN_ERR "%s: error %d sending read/write command\n",
|
|
req->rq_disk->disk_name, brq.cmd.error);
|
|
goto cmd_err;
|
|
}
|
|
|
|
if (brq.data.error) {
|
|
printk(KERN_ERR "%s: error %d transferring data\n",
|
|
req->rq_disk->disk_name, brq.data.error);
|
|
goto cmd_err;
|
|
}
|
|
|
|
if (brq.stop.error) {
|
|
printk(KERN_ERR "%s: error %d sending stop command\n",
|
|
req->rq_disk->disk_name, brq.stop.error);
|
|
goto cmd_err;
|
|
}
|
|
|
|
if (rq_data_dir(req) != READ) {
|
|
do {
|
|
int err;
|
|
|
|
cmd.opcode = MMC_SEND_STATUS;
|
|
cmd.arg = card->rca << 16;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
err = mmc_wait_for_cmd(card->host, &cmd, 5);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: error %d requesting status\n",
|
|
req->rq_disk->disk_name, err);
|
|
goto cmd_err;
|
|
}
|
|
} while (!(cmd.resp[0] & R1_READY_FOR_DATA));
|
|
|
|
#if 0
|
|
if (cmd.resp[0] & ~0x00000900)
|
|
printk(KERN_ERR "%s: status = %08x\n",
|
|
req->rq_disk->disk_name, cmd.resp[0]);
|
|
if (mmc_decode_status(cmd.resp))
|
|
goto cmd_err;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* A block was successfully transferred.
|
|
*/
|
|
spin_lock_irq(&md->lock);
|
|
ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered);
|
|
if (!ret) {
|
|
/*
|
|
* The whole request completed successfully.
|
|
*/
|
|
add_disk_randomness(req->rq_disk);
|
|
blkdev_dequeue_request(req);
|
|
end_that_request_last(req, 1);
|
|
}
|
|
spin_unlock_irq(&md->lock);
|
|
} while (ret);
|
|
|
|
mmc_card_release_host(card);
|
|
|
|
return 1;
|
|
|
|
cmd_err:
|
|
/*
|
|
* If this is an SD card and we're writing, we can first
|
|
* mark the known good sectors as ok.
|
|
*
|
|
* If the card is not SD, we can still ok written sectors
|
|
* if the controller can do proper error reporting.
|
|
*
|
|
* For reads we just fail the entire chunk as that should
|
|
* be safe in all cases.
|
|
*/
|
|
if (rq_data_dir(req) != READ && mmc_card_sd(card)) {
|
|
u32 blocks;
|
|
unsigned int bytes;
|
|
|
|
blocks = mmc_sd_num_wr_blocks(card);
|
|
if (blocks != (u32)-1) {
|
|
if (card->csd.write_partial)
|
|
bytes = blocks << md->block_bits;
|
|
else
|
|
bytes = blocks << 9;
|
|
spin_lock_irq(&md->lock);
|
|
ret = end_that_request_chunk(req, 1, bytes);
|
|
spin_unlock_irq(&md->lock);
|
|
}
|
|
} else if (rq_data_dir(req) != READ &&
|
|
(card->host->caps & MMC_CAP_MULTIWRITE)) {
|
|
spin_lock_irq(&md->lock);
|
|
ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered);
|
|
spin_unlock_irq(&md->lock);
|
|
}
|
|
|
|
flush_queue:
|
|
|
|
mmc_card_release_host(card);
|
|
|
|
spin_lock_irq(&md->lock);
|
|
while (ret) {
|
|
ret = end_that_request_chunk(req, 0,
|
|
req->current_nr_sectors << 9);
|
|
}
|
|
|
|
add_disk_randomness(req->rq_disk);
|
|
blkdev_dequeue_request(req);
|
|
end_that_request_last(req, 0);
|
|
spin_unlock_irq(&md->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
|
|
|
|
static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
|
|
|
|
static inline int mmc_blk_readonly(struct mmc_card *card)
|
|
{
|
|
return mmc_card_readonly(card) ||
|
|
!(card->csd.cmdclass & CCC_BLOCK_WRITE);
|
|
}
|
|
|
|
static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
int devidx, ret;
|
|
|
|
devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS);
|
|
if (devidx >= MMC_NUM_MINORS)
|
|
return ERR_PTR(-ENOSPC);
|
|
__set_bit(devidx, dev_use);
|
|
|
|
md = kmalloc(sizeof(struct mmc_blk_data), GFP_KERNEL);
|
|
if (!md) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
memset(md, 0, sizeof(struct mmc_blk_data));
|
|
|
|
/*
|
|
* Set the read-only status based on the supported commands
|
|
* and the write protect switch.
|
|
*/
|
|
md->read_only = mmc_blk_readonly(card);
|
|
|
|
/*
|
|
* Both SD and MMC specifications state (although a bit
|
|
* unclearly in the MMC case) that a block size of 512
|
|
* bytes must always be supported by the card.
|
|
*/
|
|
md->block_bits = 9;
|
|
|
|
md->disk = alloc_disk(1 << MMC_SHIFT);
|
|
if (md->disk == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err_kfree;
|
|
}
|
|
|
|
spin_lock_init(&md->lock);
|
|
md->usage = 1;
|
|
|
|
ret = mmc_init_queue(&md->queue, card, &md->lock);
|
|
if (ret)
|
|
goto err_putdisk;
|
|
|
|
md->queue.prep_fn = mmc_blk_prep_rq;
|
|
md->queue.issue_fn = mmc_blk_issue_rq;
|
|
md->queue.data = md;
|
|
|
|
md->disk->major = major;
|
|
md->disk->first_minor = devidx << MMC_SHIFT;
|
|
md->disk->fops = &mmc_bdops;
|
|
md->disk->private_data = md;
|
|
md->disk->queue = md->queue.queue;
|
|
md->disk->driverfs_dev = &card->dev;
|
|
|
|
/*
|
|
* As discussed on lkml, GENHD_FL_REMOVABLE should:
|
|
*
|
|
* - be set for removable media with permanent block devices
|
|
* - be unset for removable block devices with permanent media
|
|
*
|
|
* Since MMC block devices clearly fall under the second
|
|
* case, we do not set GENHD_FL_REMOVABLE. Userspace
|
|
* should use the block device creation/destruction hotplug
|
|
* messages to tell when the card is present.
|
|
*/
|
|
|
|
sprintf(md->disk->disk_name, "mmcblk%d", devidx);
|
|
|
|
blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits);
|
|
|
|
/*
|
|
* The CSD capacity field is in units of read_blkbits.
|
|
* set_capacity takes units of 512 bytes.
|
|
*/
|
|
set_capacity(md->disk, card->csd.capacity << (card->csd.read_blkbits - 9));
|
|
return md;
|
|
|
|
err_putdisk:
|
|
put_disk(md->disk);
|
|
err_kfree:
|
|
kfree(md);
|
|
out:
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static int
|
|
mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card)
|
|
{
|
|
struct mmc_command cmd;
|
|
int err;
|
|
|
|
/* Block-addressed cards ignore MMC_SET_BLOCKLEN. */
|
|
if (mmc_card_blockaddr(card))
|
|
return 0;
|
|
|
|
mmc_card_claim_host(card);
|
|
cmd.opcode = MMC_SET_BLOCKLEN;
|
|
cmd.arg = 1 << md->block_bits;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
err = mmc_wait_for_cmd(card->host, &cmd, 5);
|
|
mmc_card_release_host(card);
|
|
|
|
if (err) {
|
|
printk(KERN_ERR "%s: unable to set block size to %d: %d\n",
|
|
md->disk->disk_name, cmd.arg, err);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_blk_probe(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
int err;
|
|
|
|
/*
|
|
* Check that the card supports the command class(es) we need.
|
|
*/
|
|
if (!(card->csd.cmdclass & CCC_BLOCK_READ))
|
|
return -ENODEV;
|
|
|
|
md = mmc_blk_alloc(card);
|
|
if (IS_ERR(md))
|
|
return PTR_ERR(md);
|
|
|
|
err = mmc_blk_set_blksize(md, card);
|
|
if (err)
|
|
goto out;
|
|
|
|
printk(KERN_INFO "%s: %s %s %lluKiB %s\n",
|
|
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
|
|
(unsigned long long)(get_capacity(md->disk) >> 1),
|
|
md->read_only ? "(ro)" : "");
|
|
|
|
mmc_set_drvdata(card, md);
|
|
add_disk(md->disk);
|
|
return 0;
|
|
|
|
out:
|
|
mmc_blk_put(md);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void mmc_blk_remove(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md = mmc_get_drvdata(card);
|
|
|
|
if (md) {
|
|
int devidx;
|
|
|
|
/* Stop new requests from getting into the queue */
|
|
del_gendisk(md->disk);
|
|
|
|
/* Then flush out any already in there */
|
|
mmc_cleanup_queue(&md->queue);
|
|
|
|
devidx = md->disk->first_minor >> MMC_SHIFT;
|
|
__clear_bit(devidx, dev_use);
|
|
|
|
mmc_blk_put(md);
|
|
}
|
|
mmc_set_drvdata(card, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state)
|
|
{
|
|
struct mmc_blk_data *md = mmc_get_drvdata(card);
|
|
|
|
if (md) {
|
|
mmc_queue_suspend(&md->queue);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_blk_resume(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md = mmc_get_drvdata(card);
|
|
|
|
if (md) {
|
|
mmc_blk_set_blksize(md, card);
|
|
mmc_queue_resume(&md->queue);
|
|
}
|
|
return 0;
|
|
}
|
|
#else
|
|
#define mmc_blk_suspend NULL
|
|
#define mmc_blk_resume NULL
|
|
#endif
|
|
|
|
static struct mmc_driver mmc_driver = {
|
|
.drv = {
|
|
.name = "mmcblk",
|
|
},
|
|
.probe = mmc_blk_probe,
|
|
.remove = mmc_blk_remove,
|
|
.suspend = mmc_blk_suspend,
|
|
.resume = mmc_blk_resume,
|
|
};
|
|
|
|
static int __init mmc_blk_init(void)
|
|
{
|
|
int res = -ENOMEM;
|
|
|
|
res = register_blkdev(major, "mmc");
|
|
if (res < 0) {
|
|
printk(KERN_WARNING "Unable to get major %d for MMC media: %d\n",
|
|
major, res);
|
|
goto out;
|
|
}
|
|
if (major == 0)
|
|
major = res;
|
|
|
|
return mmc_register_driver(&mmc_driver);
|
|
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
static void __exit mmc_blk_exit(void)
|
|
{
|
|
mmc_unregister_driver(&mmc_driver);
|
|
unregister_blkdev(major, "mmc");
|
|
}
|
|
|
|
module_init(mmc_blk_init);
|
|
module_exit(mmc_blk_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver");
|
|
|
|
module_param(major, int, 0444);
|
|
MODULE_PARM_DESC(major, "specify the major device number for MMC block driver");
|