forked from Minki/linux
f0a3dd33ba
The documentation for drm_do_get_edid in drivers/gpu/drm/drm_edid.c states: "As in the general case the DDC bus is accessible by the kernel at the I2C level, drivers must make all reasonable efforts to expose it as an I2C adapter and use drm_get_edid() instead of abusing this function." Exposing the DDC bus as an I2C adapter is more beneficial as it can be used for purposes other than reading the EDID such as modifying the EDID or using the HDMI DDC pins as an I2C bus through the I2C dev interface from userspace (e.g. i2c-tools). Implement this for A10s. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
221 lines
6.3 KiB
C
221 lines
6.3 KiB
C
/*
|
|
* Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
* Copyright (C) 2017 Jonathan Liu <net147@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#include "sun4i_hdmi.h"
|
|
|
|
#define SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK ( \
|
|
SUN4I_HDMI_DDC_INT_STATUS_ILLEGAL_FIFO_OPERATION | \
|
|
SUN4I_HDMI_DDC_INT_STATUS_DDC_RX_FIFO_UNDERFLOW | \
|
|
SUN4I_HDMI_DDC_INT_STATUS_DDC_TX_FIFO_OVERFLOW | \
|
|
SUN4I_HDMI_DDC_INT_STATUS_ARBITRATION_ERROR | \
|
|
SUN4I_HDMI_DDC_INT_STATUS_ACK_ERROR | \
|
|
SUN4I_HDMI_DDC_INT_STATUS_BUS_ERROR \
|
|
)
|
|
|
|
/* FIFO request bit is set when FIFO level is above RX_THRESHOLD during read */
|
|
#define RX_THRESHOLD SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES_MAX
|
|
/* FIFO request bit is set when FIFO level is below TX_THRESHOLD during write */
|
|
#define TX_THRESHOLD 1
|
|
|
|
static int fifo_transfer(struct sun4i_hdmi *hdmi, u8 *buf, int len, bool read)
|
|
{
|
|
/*
|
|
* 1 byte takes 9 clock cycles (8 bits + 1 ACK) = 90 us for 100 kHz
|
|
* clock. As clock rate is fixed, just round it up to 100 us.
|
|
*/
|
|
const unsigned long byte_time_ns = 100;
|
|
const u32 mask = SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK |
|
|
SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST |
|
|
SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE;
|
|
u32 reg;
|
|
|
|
/* Limit transfer length by FIFO threshold */
|
|
len = min_t(int, len, read ? (RX_THRESHOLD + 1) :
|
|
(SUN4I_HDMI_DDC_FIFO_SIZE - TX_THRESHOLD + 1));
|
|
|
|
/* Wait until error, FIFO request bit set or transfer complete */
|
|
if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG, reg,
|
|
reg & mask, len * byte_time_ns, 100000))
|
|
return -ETIMEDOUT;
|
|
|
|
if (reg & SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK)
|
|
return -EIO;
|
|
|
|
if (read)
|
|
readsb(hdmi->base + SUN4I_HDMI_DDC_FIFO_DATA_REG, buf, len);
|
|
else
|
|
writesb(hdmi->base + SUN4I_HDMI_DDC_FIFO_DATA_REG, buf, len);
|
|
|
|
/* Clear FIFO request bit */
|
|
writel(SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST,
|
|
hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
|
|
|
|
return len;
|
|
}
|
|
|
|
static int xfer_msg(struct sun4i_hdmi *hdmi, struct i2c_msg *msg)
|
|
{
|
|
int i, len;
|
|
u32 reg;
|
|
|
|
/* Set FIFO direction */
|
|
reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
|
|
reg &= ~SUN4I_HDMI_DDC_CTRL_FIFO_DIR_MASK;
|
|
reg |= (msg->flags & I2C_M_RD) ?
|
|
SUN4I_HDMI_DDC_CTRL_FIFO_DIR_READ :
|
|
SUN4I_HDMI_DDC_CTRL_FIFO_DIR_WRITE;
|
|
writel(reg, hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
|
|
|
|
/* Set I2C address */
|
|
writel(SUN4I_HDMI_DDC_ADDR_SLAVE(msg->addr),
|
|
hdmi->base + SUN4I_HDMI_DDC_ADDR_REG);
|
|
|
|
/* Set FIFO RX/TX thresholds and clear FIFO */
|
|
reg = readl(hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
|
|
reg |= SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR;
|
|
reg &= ~SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES_MASK;
|
|
reg |= SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES(RX_THRESHOLD);
|
|
reg &= ~SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES_MASK;
|
|
reg |= SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES(TX_THRESHOLD);
|
|
writel(reg, hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
|
|
if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG,
|
|
reg,
|
|
!(reg & SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR),
|
|
100, 2000))
|
|
return -EIO;
|
|
|
|
/* Set transfer length */
|
|
writel(msg->len, hdmi->base + SUN4I_HDMI_DDC_BYTE_COUNT_REG);
|
|
|
|
/* Set command */
|
|
writel(msg->flags & I2C_M_RD ?
|
|
SUN4I_HDMI_DDC_CMD_IMPLICIT_READ :
|
|
SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE,
|
|
hdmi->base + SUN4I_HDMI_DDC_CMD_REG);
|
|
|
|
/* Clear interrupt status bits */
|
|
writel(SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK |
|
|
SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST |
|
|
SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE,
|
|
hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
|
|
|
|
/* Start command */
|
|
reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
|
|
writel(reg | SUN4I_HDMI_DDC_CTRL_START_CMD,
|
|
hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
|
|
|
|
/* Transfer bytes */
|
|
for (i = 0; i < msg->len; i += len) {
|
|
len = fifo_transfer(hdmi, msg->buf + i, msg->len - i,
|
|
msg->flags & I2C_M_RD);
|
|
if (len <= 0)
|
|
return len;
|
|
}
|
|
|
|
/* Wait for command to finish */
|
|
if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG,
|
|
reg,
|
|
!(reg & SUN4I_HDMI_DDC_CTRL_START_CMD),
|
|
100, 100000))
|
|
return -EIO;
|
|
|
|
/* Check for errors */
|
|
reg = readl(hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
|
|
if ((reg & SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK) ||
|
|
!(reg & SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE)) {
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_hdmi_i2c_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct sun4i_hdmi *hdmi = i2c_get_adapdata(adap);
|
|
u32 reg;
|
|
int err, i, ret = num;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
if (!msgs[i].len)
|
|
return -EINVAL;
|
|
if (msgs[i].len > SUN4I_HDMI_DDC_BYTE_COUNT_MAX)
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Reset I2C controller */
|
|
writel(SUN4I_HDMI_DDC_CTRL_ENABLE | SUN4I_HDMI_DDC_CTRL_RESET,
|
|
hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
|
|
if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG, reg,
|
|
!(reg & SUN4I_HDMI_DDC_CTRL_RESET),
|
|
100, 2000))
|
|
return -EIO;
|
|
|
|
writel(SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE |
|
|
SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE,
|
|
hdmi->base + SUN4I_HDMI_DDC_LINE_CTRL_REG);
|
|
|
|
clk_prepare_enable(hdmi->ddc_clk);
|
|
clk_set_rate(hdmi->ddc_clk, 100000);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
err = xfer_msg(hdmi, &msgs[i]);
|
|
if (err) {
|
|
ret = err;
|
|
break;
|
|
}
|
|
}
|
|
|
|
clk_disable_unprepare(hdmi->ddc_clk);
|
|
return ret;
|
|
}
|
|
|
|
static u32 sun4i_hdmi_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm sun4i_hdmi_i2c_algorithm = {
|
|
.master_xfer = sun4i_hdmi_i2c_xfer,
|
|
.functionality = sun4i_hdmi_i2c_func,
|
|
};
|
|
|
|
int sun4i_hdmi_i2c_create(struct device *dev, struct sun4i_hdmi *hdmi)
|
|
{
|
|
struct i2c_adapter *adap;
|
|
int ret = 0;
|
|
|
|
ret = sun4i_ddc_create(hdmi, hdmi->tmds_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
adap = devm_kzalloc(dev, sizeof(*adap), GFP_KERNEL);
|
|
if (!adap)
|
|
return -ENOMEM;
|
|
|
|
adap->owner = THIS_MODULE;
|
|
adap->class = I2C_CLASS_DDC;
|
|
adap->algo = &sun4i_hdmi_i2c_algorithm;
|
|
strlcpy(adap->name, "sun4i_hdmi_i2c adapter", sizeof(adap->name));
|
|
i2c_set_adapdata(adap, hdmi);
|
|
|
|
ret = i2c_add_adapter(adap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
hdmi->i2c = adap;
|
|
|
|
return ret;
|
|
}
|