forked from Minki/linux
f01a7beb67
The act8600_sudcdc_voltage_ranges setting does not match the datasheet.
The problems in below entry:
REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
1. The off-by-one min_sel causes wrong volatage calculation.
The min_sel should be 192.
2. According to the datasheet[1] Table 7. (on page 43):
The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V.
Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM.
[1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf
Fixes: df3a950e4e
("regulator: act8865: Add act8600 support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
626 lines
18 KiB
C
626 lines
18 KiB
C
/*
|
|
* act8865-regulator.c - Voltage regulation for active-semi ACT88xx PMUs
|
|
*
|
|
* http://www.active-semi.com/products/power-management-units/act88xx/
|
|
*
|
|
* Copyright (C) 2013 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/act8865.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/*
|
|
* ACT8600 Global Register Map.
|
|
*/
|
|
#define ACT8600_SYS_MODE 0x00
|
|
#define ACT8600_SYS_CTRL 0x01
|
|
#define ACT8600_DCDC1_VSET 0x10
|
|
#define ACT8600_DCDC1_CTRL 0x12
|
|
#define ACT8600_DCDC2_VSET 0x20
|
|
#define ACT8600_DCDC2_CTRL 0x22
|
|
#define ACT8600_DCDC3_VSET 0x30
|
|
#define ACT8600_DCDC3_CTRL 0x32
|
|
#define ACT8600_SUDCDC4_VSET 0x40
|
|
#define ACT8600_SUDCDC4_CTRL 0x41
|
|
#define ACT8600_LDO5_VSET 0x50
|
|
#define ACT8600_LDO5_CTRL 0x51
|
|
#define ACT8600_LDO6_VSET 0x60
|
|
#define ACT8600_LDO6_CTRL 0x61
|
|
#define ACT8600_LDO7_VSET 0x70
|
|
#define ACT8600_LDO7_CTRL 0x71
|
|
#define ACT8600_LDO8_VSET 0x80
|
|
#define ACT8600_LDO8_CTRL 0x81
|
|
#define ACT8600_LDO910_CTRL 0x91
|
|
#define ACT8600_APCH0 0xA1
|
|
#define ACT8600_APCH1 0xA8
|
|
#define ACT8600_APCH2 0xA9
|
|
#define ACT8600_APCH_STAT 0xAA
|
|
#define ACT8600_OTG0 0xB0
|
|
#define ACT8600_OTG1 0xB2
|
|
|
|
/*
|
|
* ACT8846 Global Register Map.
|
|
*/
|
|
#define ACT8846_SYS0 0x00
|
|
#define ACT8846_SYS1 0x01
|
|
#define ACT8846_REG1_VSET 0x10
|
|
#define ACT8846_REG1_CTRL 0x12
|
|
#define ACT8846_REG2_VSET0 0x20
|
|
#define ACT8846_REG2_VSET1 0x21
|
|
#define ACT8846_REG2_CTRL 0x22
|
|
#define ACT8846_REG3_VSET0 0x30
|
|
#define ACT8846_REG3_VSET1 0x31
|
|
#define ACT8846_REG3_CTRL 0x32
|
|
#define ACT8846_REG4_VSET0 0x40
|
|
#define ACT8846_REG4_VSET1 0x41
|
|
#define ACT8846_REG4_CTRL 0x42
|
|
#define ACT8846_REG5_VSET 0x50
|
|
#define ACT8846_REG5_CTRL 0x51
|
|
#define ACT8846_REG6_VSET 0x58
|
|
#define ACT8846_REG6_CTRL 0x59
|
|
#define ACT8846_REG7_VSET 0x60
|
|
#define ACT8846_REG7_CTRL 0x61
|
|
#define ACT8846_REG8_VSET 0x68
|
|
#define ACT8846_REG8_CTRL 0x69
|
|
#define ACT8846_REG9_VSET 0x70
|
|
#define ACT8846_REG9_CTRL 0x71
|
|
#define ACT8846_REG10_VSET 0x80
|
|
#define ACT8846_REG10_CTRL 0x81
|
|
#define ACT8846_REG11_VSET 0x90
|
|
#define ACT8846_REG11_CTRL 0x91
|
|
#define ACT8846_REG12_VSET 0xa0
|
|
#define ACT8846_REG12_CTRL 0xa1
|
|
#define ACT8846_REG13_CTRL 0xb1
|
|
#define ACT8846_GLB_OFF_CTRL 0xc3
|
|
#define ACT8846_OFF_SYSMASK 0x18
|
|
|
|
/*
|
|
* ACT8865 Global Register Map.
|
|
*/
|
|
#define ACT8865_SYS_MODE 0x00
|
|
#define ACT8865_SYS_CTRL 0x01
|
|
#define ACT8865_DCDC1_VSET1 0x20
|
|
#define ACT8865_DCDC1_VSET2 0x21
|
|
#define ACT8865_DCDC1_CTRL 0x22
|
|
#define ACT8865_DCDC2_VSET1 0x30
|
|
#define ACT8865_DCDC2_VSET2 0x31
|
|
#define ACT8865_DCDC2_CTRL 0x32
|
|
#define ACT8865_DCDC3_VSET1 0x40
|
|
#define ACT8865_DCDC3_VSET2 0x41
|
|
#define ACT8865_DCDC3_CTRL 0x42
|
|
#define ACT8865_LDO1_VSET 0x50
|
|
#define ACT8865_LDO1_CTRL 0x51
|
|
#define ACT8865_LDO2_VSET 0x54
|
|
#define ACT8865_LDO2_CTRL 0x55
|
|
#define ACT8865_LDO3_VSET 0x60
|
|
#define ACT8865_LDO3_CTRL 0x61
|
|
#define ACT8865_LDO4_VSET 0x64
|
|
#define ACT8865_LDO4_CTRL 0x65
|
|
#define ACT8865_MSTROFF 0x20
|
|
|
|
/*
|
|
* Field Definitions.
|
|
*/
|
|
#define ACT8865_ENA 0x80 /* ON - [7] */
|
|
#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
|
|
|
|
|
|
#define ACT8600_LDO10_ENA 0x40 /* ON - [6] */
|
|
#define ACT8600_SUDCDC_VSEL_MASK 0xFF /* SUDCDC VSET - [7:0] */
|
|
|
|
/*
|
|
* ACT8865 voltage number
|
|
*/
|
|
#define ACT8865_VOLTAGE_NUM 64
|
|
#define ACT8600_SUDCDC_VOLTAGE_NUM 256
|
|
|
|
struct act8865 {
|
|
struct regmap *regmap;
|
|
int off_reg;
|
|
int off_mask;
|
|
};
|
|
|
|
static const struct regmap_range act8600_reg_ranges[] = {
|
|
regmap_reg_range(0x00, 0x01),
|
|
regmap_reg_range(0x10, 0x10),
|
|
regmap_reg_range(0x12, 0x12),
|
|
regmap_reg_range(0x20, 0x20),
|
|
regmap_reg_range(0x22, 0x22),
|
|
regmap_reg_range(0x30, 0x30),
|
|
regmap_reg_range(0x32, 0x32),
|
|
regmap_reg_range(0x40, 0x41),
|
|
regmap_reg_range(0x50, 0x51),
|
|
regmap_reg_range(0x60, 0x61),
|
|
regmap_reg_range(0x70, 0x71),
|
|
regmap_reg_range(0x80, 0x81),
|
|
regmap_reg_range(0x91, 0x91),
|
|
regmap_reg_range(0xA1, 0xA1),
|
|
regmap_reg_range(0xA8, 0xAA),
|
|
regmap_reg_range(0xB0, 0xB0),
|
|
regmap_reg_range(0xB2, 0xB2),
|
|
regmap_reg_range(0xC1, 0xC1),
|
|
};
|
|
|
|
static const struct regmap_range act8600_reg_ro_ranges[] = {
|
|
regmap_reg_range(0xAA, 0xAA),
|
|
regmap_reg_range(0xC1, 0xC1),
|
|
};
|
|
|
|
static const struct regmap_range act8600_reg_volatile_ranges[] = {
|
|
regmap_reg_range(0x00, 0x01),
|
|
regmap_reg_range(0x12, 0x12),
|
|
regmap_reg_range(0x22, 0x22),
|
|
regmap_reg_range(0x32, 0x32),
|
|
regmap_reg_range(0x41, 0x41),
|
|
regmap_reg_range(0x51, 0x51),
|
|
regmap_reg_range(0x61, 0x61),
|
|
regmap_reg_range(0x71, 0x71),
|
|
regmap_reg_range(0x81, 0x81),
|
|
regmap_reg_range(0xA8, 0xA8),
|
|
regmap_reg_range(0xAA, 0xAA),
|
|
regmap_reg_range(0xB0, 0xB0),
|
|
regmap_reg_range(0xC1, 0xC1),
|
|
};
|
|
|
|
static const struct regmap_access_table act8600_write_ranges_table = {
|
|
.yes_ranges = act8600_reg_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(act8600_reg_ranges),
|
|
.no_ranges = act8600_reg_ro_ranges,
|
|
.n_no_ranges = ARRAY_SIZE(act8600_reg_ro_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table act8600_read_ranges_table = {
|
|
.yes_ranges = act8600_reg_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(act8600_reg_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table act8600_volatile_ranges_table = {
|
|
.yes_ranges = act8600_reg_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(act8600_reg_volatile_ranges),
|
|
};
|
|
|
|
static const struct regmap_config act8600_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xFF,
|
|
.wr_table = &act8600_write_ranges_table,
|
|
.rd_table = &act8600_read_ranges_table,
|
|
.volatile_table = &act8600_volatile_ranges_table,
|
|
};
|
|
|
|
static const struct regmap_config act8865_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
static const struct regulator_linear_range act8865_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
|
|
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
|
|
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
|
|
};
|
|
|
|
static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
|
|
REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
|
|
REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
|
|
REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000),
|
|
REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
|
|
};
|
|
|
|
static struct regulator_ops act8865_ops = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static struct regulator_ops act8865_ldo_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
#define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \
|
|
[_family##_ID_##_id] = { \
|
|
.name = _name, \
|
|
.supply_name = _supply, \
|
|
.id = _family##_ID_##_id, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.ops = &act8865_ops, \
|
|
.n_voltages = ACT8865_VOLTAGE_NUM, \
|
|
.linear_ranges = act8865_voltage_ranges, \
|
|
.n_linear_ranges = ARRAY_SIZE(act8865_voltage_ranges), \
|
|
.vsel_reg = _family##_##_id##_##_vsel_reg, \
|
|
.vsel_mask = ACT8865_VSEL_MASK, \
|
|
.enable_reg = _family##_##_id##_CTRL, \
|
|
.enable_mask = ACT8865_ENA, \
|
|
.owner = THIS_MODULE, \
|
|
}
|
|
|
|
static const struct regulator_desc act8600_regulators[] = {
|
|
ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET, "vp1"),
|
|
ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET, "vp2"),
|
|
ACT88xx_REG("DCDC3", ACT8600, DCDC3, VSET, "vp3"),
|
|
{
|
|
.name = "SUDCDC_REG4",
|
|
.id = ACT8600_ID_SUDCDC4,
|
|
.ops = &act8865_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = ACT8600_SUDCDC_VOLTAGE_NUM,
|
|
.linear_ranges = act8600_sudcdc_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(act8600_sudcdc_voltage_ranges),
|
|
.vsel_reg = ACT8600_SUDCDC4_VSET,
|
|
.vsel_mask = ACT8600_SUDCDC_VSEL_MASK,
|
|
.enable_reg = ACT8600_SUDCDC4_CTRL,
|
|
.enable_mask = ACT8865_ENA,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
ACT88xx_REG("LDO5", ACT8600, LDO5, VSET, "inl"),
|
|
ACT88xx_REG("LDO6", ACT8600, LDO6, VSET, "inl"),
|
|
ACT88xx_REG("LDO7", ACT8600, LDO7, VSET, "inl"),
|
|
ACT88xx_REG("LDO8", ACT8600, LDO8, VSET, "inl"),
|
|
{
|
|
.name = "LDO_REG9",
|
|
.id = ACT8600_ID_LDO9,
|
|
.ops = &act8865_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 1,
|
|
.fixed_uV = 3300000,
|
|
.enable_reg = ACT8600_LDO910_CTRL,
|
|
.enable_mask = ACT8865_ENA,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
{
|
|
.name = "LDO_REG10",
|
|
.id = ACT8600_ID_LDO10,
|
|
.ops = &act8865_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 1,
|
|
.fixed_uV = 1200000,
|
|
.enable_reg = ACT8600_LDO910_CTRL,
|
|
.enable_mask = ACT8600_LDO10_ENA,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static const struct regulator_desc act8846_regulators[] = {
|
|
ACT88xx_REG("REG1", ACT8846, REG1, VSET, "vp1"),
|
|
ACT88xx_REG("REG2", ACT8846, REG2, VSET0, "vp2"),
|
|
ACT88xx_REG("REG3", ACT8846, REG3, VSET0, "vp3"),
|
|
ACT88xx_REG("REG4", ACT8846, REG4, VSET0, "vp4"),
|
|
ACT88xx_REG("REG5", ACT8846, REG5, VSET, "inl1"),
|
|
ACT88xx_REG("REG6", ACT8846, REG6, VSET, "inl1"),
|
|
ACT88xx_REG("REG7", ACT8846, REG7, VSET, "inl1"),
|
|
ACT88xx_REG("REG8", ACT8846, REG8, VSET, "inl2"),
|
|
ACT88xx_REG("REG9", ACT8846, REG9, VSET, "inl2"),
|
|
ACT88xx_REG("REG10", ACT8846, REG10, VSET, "inl3"),
|
|
ACT88xx_REG("REG11", ACT8846, REG11, VSET, "inl3"),
|
|
ACT88xx_REG("REG12", ACT8846, REG12, VSET, "inl3"),
|
|
};
|
|
|
|
static const struct regulator_desc act8865_regulators[] = {
|
|
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1, "vp1"),
|
|
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1, "vp2"),
|
|
ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1, "vp3"),
|
|
ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
|
|
ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
|
|
ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
|
|
ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
|
|
};
|
|
|
|
static const struct regulator_desc act8865_alt_regulators[] = {
|
|
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"),
|
|
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"),
|
|
ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"),
|
|
ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
|
|
ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
|
|
ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
|
|
ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id act8865_dt_ids[] = {
|
|
{ .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
|
|
{ .compatible = "active-semi,act8846", .data = (void *)ACT8846 },
|
|
{ .compatible = "active-semi,act8865", .data = (void *)ACT8865 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, act8865_dt_ids);
|
|
|
|
static struct of_regulator_match act8846_matches[] = {
|
|
[ACT8846_ID_REG1] = { .name = "REG1" },
|
|
[ACT8846_ID_REG2] = { .name = "REG2" },
|
|
[ACT8846_ID_REG3] = { .name = "REG3" },
|
|
[ACT8846_ID_REG4] = { .name = "REG4" },
|
|
[ACT8846_ID_REG5] = { .name = "REG5" },
|
|
[ACT8846_ID_REG6] = { .name = "REG6" },
|
|
[ACT8846_ID_REG7] = { .name = "REG7" },
|
|
[ACT8846_ID_REG8] = { .name = "REG8" },
|
|
[ACT8846_ID_REG9] = { .name = "REG9" },
|
|
[ACT8846_ID_REG10] = { .name = "REG10" },
|
|
[ACT8846_ID_REG11] = { .name = "REG11" },
|
|
[ACT8846_ID_REG12] = { .name = "REG12" },
|
|
};
|
|
|
|
static struct of_regulator_match act8865_matches[] = {
|
|
[ACT8865_ID_DCDC1] = { .name = "DCDC_REG1"},
|
|
[ACT8865_ID_DCDC2] = { .name = "DCDC_REG2"},
|
|
[ACT8865_ID_DCDC3] = { .name = "DCDC_REG3"},
|
|
[ACT8865_ID_LDO1] = { .name = "LDO_REG1"},
|
|
[ACT8865_ID_LDO2] = { .name = "LDO_REG2"},
|
|
[ACT8865_ID_LDO3] = { .name = "LDO_REG3"},
|
|
[ACT8865_ID_LDO4] = { .name = "LDO_REG4"},
|
|
};
|
|
|
|
static struct of_regulator_match act8600_matches[] = {
|
|
[ACT8600_ID_DCDC1] = { .name = "DCDC_REG1"},
|
|
[ACT8600_ID_DCDC2] = { .name = "DCDC_REG2"},
|
|
[ACT8600_ID_DCDC3] = { .name = "DCDC_REG3"},
|
|
[ACT8600_ID_SUDCDC4] = { .name = "SUDCDC_REG4"},
|
|
[ACT8600_ID_LDO5] = { .name = "LDO_REG5"},
|
|
[ACT8600_ID_LDO6] = { .name = "LDO_REG6"},
|
|
[ACT8600_ID_LDO7] = { .name = "LDO_REG7"},
|
|
[ACT8600_ID_LDO8] = { .name = "LDO_REG8"},
|
|
[ACT8600_ID_LDO9] = { .name = "LDO_REG9"},
|
|
[ACT8600_ID_LDO10] = { .name = "LDO_REG10"},
|
|
};
|
|
|
|
static int act8865_pdata_from_dt(struct device *dev,
|
|
struct act8865_platform_data *pdata,
|
|
unsigned long type)
|
|
{
|
|
int matched, i, num_matches;
|
|
struct device_node *np;
|
|
struct act8865_regulator_data *regulator;
|
|
struct of_regulator_match *matches;
|
|
|
|
switch (type) {
|
|
case ACT8600:
|
|
matches = act8600_matches;
|
|
num_matches = ARRAY_SIZE(act8600_matches);
|
|
break;
|
|
case ACT8846:
|
|
matches = act8846_matches;
|
|
num_matches = ARRAY_SIZE(act8846_matches);
|
|
break;
|
|
case ACT8865:
|
|
matches = act8865_matches;
|
|
num_matches = ARRAY_SIZE(act8865_matches);
|
|
break;
|
|
default:
|
|
dev_err(dev, "invalid device id %lu\n", type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
np = of_get_child_by_name(dev->of_node, "regulators");
|
|
if (!np) {
|
|
dev_err(dev, "missing 'regulators' subnode in DT\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
matched = of_regulator_match(dev, np, matches, num_matches);
|
|
of_node_put(np);
|
|
if (matched <= 0)
|
|
return matched;
|
|
|
|
pdata->regulators = devm_kcalloc(dev,
|
|
num_matches,
|
|
sizeof(struct act8865_regulator_data),
|
|
GFP_KERNEL);
|
|
if (!pdata->regulators)
|
|
return -ENOMEM;
|
|
|
|
pdata->num_regulators = num_matches;
|
|
regulator = pdata->regulators;
|
|
|
|
for (i = 0; i < num_matches; i++) {
|
|
regulator->id = i;
|
|
regulator->name = matches[i].name;
|
|
regulator->init_data = matches[i].init_data;
|
|
regulator->of_node = matches[i].of_node;
|
|
regulator++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int act8865_pdata_from_dt(struct device *dev,
|
|
struct act8865_platform_data *pdata,
|
|
unsigned long type)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static struct act8865_regulator_data *act8865_get_regulator_data(
|
|
int id, struct act8865_platform_data *pdata)
|
|
{
|
|
int i;
|
|
|
|
if (!pdata)
|
|
return NULL;
|
|
|
|
for (i = 0; i < pdata->num_regulators; i++) {
|
|
if (pdata->regulators[i].id == id)
|
|
return &pdata->regulators[i];
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct i2c_client *act8865_i2c_client;
|
|
static void act8865_power_off(void)
|
|
{
|
|
struct act8865 *act8865;
|
|
|
|
act8865 = i2c_get_clientdata(act8865_i2c_client);
|
|
regmap_write(act8865->regmap, act8865->off_reg, act8865->off_mask);
|
|
while (1);
|
|
}
|
|
|
|
static int act8865_pmic_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *i2c_id)
|
|
{
|
|
const struct regulator_desc *regulators;
|
|
struct act8865_platform_data pdata_of, *pdata;
|
|
struct device *dev = &client->dev;
|
|
int i, ret, num_regulators;
|
|
struct act8865 *act8865;
|
|
const struct regmap_config *regmap_config;
|
|
unsigned long type;
|
|
int off_reg, off_mask;
|
|
int voltage_select = 0;
|
|
|
|
pdata = dev_get_platdata(dev);
|
|
|
|
if (dev->of_node && !pdata) {
|
|
const struct of_device_id *id;
|
|
|
|
id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
|
|
if (!id)
|
|
return -ENODEV;
|
|
|
|
type = (unsigned long) id->data;
|
|
|
|
voltage_select = !!of_get_property(dev->of_node,
|
|
"active-semi,vsel-high",
|
|
NULL);
|
|
} else {
|
|
type = i2c_id->driver_data;
|
|
}
|
|
|
|
switch (type) {
|
|
case ACT8600:
|
|
regulators = act8600_regulators;
|
|
num_regulators = ARRAY_SIZE(act8600_regulators);
|
|
regmap_config = &act8600_regmap_config;
|
|
off_reg = -1;
|
|
off_mask = -1;
|
|
break;
|
|
case ACT8846:
|
|
regulators = act8846_regulators;
|
|
num_regulators = ARRAY_SIZE(act8846_regulators);
|
|
regmap_config = &act8865_regmap_config;
|
|
off_reg = ACT8846_GLB_OFF_CTRL;
|
|
off_mask = ACT8846_OFF_SYSMASK;
|
|
break;
|
|
case ACT8865:
|
|
if (voltage_select) {
|
|
regulators = act8865_alt_regulators;
|
|
num_regulators = ARRAY_SIZE(act8865_alt_regulators);
|
|
} else {
|
|
regulators = act8865_regulators;
|
|
num_regulators = ARRAY_SIZE(act8865_regulators);
|
|
}
|
|
regmap_config = &act8865_regmap_config;
|
|
off_reg = ACT8865_SYS_CTRL;
|
|
off_mask = ACT8865_MSTROFF;
|
|
break;
|
|
default:
|
|
dev_err(dev, "invalid device id %lu\n", type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dev->of_node && !pdata) {
|
|
ret = act8865_pdata_from_dt(dev, &pdata_of, type);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
pdata = &pdata_of;
|
|
}
|
|
|
|
act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL);
|
|
if (!act8865)
|
|
return -ENOMEM;
|
|
|
|
act8865->regmap = devm_regmap_init_i2c(client, regmap_config);
|
|
if (IS_ERR(act8865->regmap)) {
|
|
ret = PTR_ERR(act8865->regmap);
|
|
dev_err(dev, "Failed to allocate register map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (of_device_is_system_power_controller(dev->of_node)) {
|
|
if (!pm_power_off && (off_reg > 0)) {
|
|
act8865_i2c_client = client;
|
|
act8865->off_reg = off_reg;
|
|
act8865->off_mask = off_mask;
|
|
pm_power_off = act8865_power_off;
|
|
} else {
|
|
dev_err(dev, "Failed to set poweroff capability, already defined\n");
|
|
}
|
|
}
|
|
|
|
/* Finally register devices */
|
|
for (i = 0; i < num_regulators; i++) {
|
|
const struct regulator_desc *desc = ®ulators[i];
|
|
struct regulator_config config = { };
|
|
struct act8865_regulator_data *rdata;
|
|
struct regulator_dev *rdev;
|
|
|
|
config.dev = dev;
|
|
config.driver_data = act8865;
|
|
config.regmap = act8865->regmap;
|
|
|
|
rdata = act8865_get_regulator_data(desc->id, pdata);
|
|
if (rdata) {
|
|
config.init_data = rdata->init_data;
|
|
config.of_node = rdata->of_node;
|
|
}
|
|
|
|
rdev = devm_regulator_register(dev, desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(dev, "failed to register %s\n", desc->name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
i2c_set_clientdata(client, act8865);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id act8865_ids[] = {
|
|
{ .name = "act8600", .driver_data = ACT8600 },
|
|
{ .name = "act8846", .driver_data = ACT8846 },
|
|
{ .name = "act8865", .driver_data = ACT8865 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, act8865_ids);
|
|
|
|
static struct i2c_driver act8865_pmic_driver = {
|
|
.driver = {
|
|
.name = "act8865",
|
|
},
|
|
.probe = act8865_pmic_probe,
|
|
.id_table = act8865_ids,
|
|
};
|
|
|
|
module_i2c_driver(act8865_pmic_driver);
|
|
|
|
MODULE_DESCRIPTION("active-semi act88xx voltage regulator driver");
|
|
MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
|
|
MODULE_LICENSE("GPL v2");
|