forked from Minki/linux
8bd26e3a7e
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
and are flagged as __cpuinit -- so if we remove the __cpuinit from
the arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
related content into no-ops as early as possible, since that will get
rid of these warnings. In any case, they are temporary and harmless.
This removes all the ARM uses of the __cpuinit macros from C code,
and all __CPUINIT from assembly code. It also had two ".previous"
section statements that were paired off against __CPUINIT
(aka .section ".cpuinit.text") that also get removed here.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
219 lines
5.1 KiB
ArmAsm
219 lines
5.1 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
|
|
*
|
|
* Written by : Luke Lee
|
|
* Copyright (C) 2005 Faraday Corp.
|
|
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*
|
|
* These are the low level assembler for performing cache and TLB
|
|
* functions on the fa526.
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
#define CACHE_DLINESIZE 16
|
|
|
|
.text
|
|
/*
|
|
* cpu_fa526_proc_init()
|
|
*/
|
|
ENTRY(cpu_fa526_proc_init)
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_fa526_proc_fin()
|
|
*/
|
|
ENTRY(cpu_fa526_proc_fin)
|
|
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
|
|
bic r0, r0, #0x1000 @ ...i............
|
|
bic r0, r0, #0x000e @ ............wca.
|
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
|
nop
|
|
nop
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_fa526_reset(loc)
|
|
*
|
|
* Perform a soft reset of the system. Put the CPU into the
|
|
* same state as it would be if it had been reset, and branch
|
|
* to what would be the reset vector.
|
|
*
|
|
* loc: location to jump to for soft reset
|
|
*/
|
|
.align 4
|
|
.pushsection .idmap.text, "ax"
|
|
ENTRY(cpu_fa526_reset)
|
|
/* TODO: Use CP8 if possible... */
|
|
mov ip, #0
|
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
|
#endif
|
|
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
bic ip, ip, #0x000f @ ............wcam
|
|
bic ip, ip, #0x1100 @ ...i...s........
|
|
bic ip, ip, #0x0800 @ BTB off
|
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
nop
|
|
nop
|
|
mov pc, r0
|
|
ENDPROC(cpu_fa526_reset)
|
|
.popsection
|
|
|
|
/*
|
|
* cpu_fa526_do_idle()
|
|
*/
|
|
.align 4
|
|
ENTRY(cpu_fa526_do_idle)
|
|
mov pc, lr
|
|
|
|
|
|
ENTRY(cpu_fa526_dcache_clean_area)
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
subs r1, r1, #CACHE_DLINESIZE
|
|
bhi 1b
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/* =============================== PageTable ============================== */
|
|
|
|
/*
|
|
* cpu_fa526_switch_mm(pgd)
|
|
*
|
|
* Set the translation base pointer to be as described by pgd.
|
|
*
|
|
* pgd: new page tables
|
|
*/
|
|
.align 4
|
|
ENTRY(cpu_fa526_switch_mm)
|
|
#ifdef CONFIG_MMU
|
|
mov ip, #0
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
|
|
#else
|
|
mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache
|
|
#endif
|
|
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
|
|
mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed
|
|
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
|
|
mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
|
|
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
|
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
|
|
#endif
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_fa526_set_pte_ext(ptep, pte, ext)
|
|
*
|
|
* Set a PTE and flush it out
|
|
*/
|
|
.align 4
|
|
ENTRY(cpu_fa526_set_pte_ext)
|
|
#ifdef CONFIG_MMU
|
|
armv3_set_pte_ext
|
|
mov r0, r0
|
|
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
#endif
|
|
mov pc, lr
|
|
|
|
.type __fa526_setup, #function
|
|
__fa526_setup:
|
|
/* On return of this routine, r0 must carry correct flags for CFG register */
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
|
|
#endif
|
|
mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM
|
|
|
|
mov r0, #1
|
|
mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All
|
|
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
|
|
mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
|
|
|
|
mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client
|
|
mcr p15, 0, r0, c3, c0 @ load domain access register
|
|
|
|
mrc p15, 0, r0, c1, c0 @ get control register v4
|
|
ldr r5, fa526_cr1_clear
|
|
bic r0, r0, r5
|
|
ldr r5, fa526_cr1_set
|
|
orr r0, r0, r5
|
|
mov pc, lr
|
|
.size __fa526_setup, . - __fa526_setup
|
|
|
|
/*
|
|
* .RVI ZFRS BLDP WCAM
|
|
* ..11 1001 .111 1101
|
|
*
|
|
*/
|
|
.type fa526_cr1_clear, #object
|
|
.type fa526_cr1_set, #object
|
|
fa526_cr1_clear:
|
|
.word 0x3f3f
|
|
fa526_cr1_set:
|
|
.word 0x397D
|
|
|
|
__INITDATA
|
|
|
|
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
|
|
define_processor_functions fa526, dabort=v4_early_abort, pabort=legacy_pabort
|
|
|
|
.section ".rodata"
|
|
|
|
string cpu_arch_name, "armv4"
|
|
string cpu_elf_name, "v4"
|
|
string cpu_fa526_name, "FA526"
|
|
|
|
.align
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
|
|
.type __fa526_proc_info,#object
|
|
__fa526_proc_info:
|
|
.long 0x66015261
|
|
.long 0xff01fff1
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_BUFFERABLE | \
|
|
PMD_SECT_CACHEABLE | \
|
|
PMD_BIT4 | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_BIT4 | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
b __fa526_setup
|
|
.long cpu_arch_name
|
|
.long cpu_elf_name
|
|
.long HWCAP_SWP | HWCAP_HALF
|
|
.long cpu_fa526_name
|
|
.long fa526_processor_functions
|
|
.long fa_tlb_fns
|
|
.long fa_user_fns
|
|
.long fa_cache_fns
|
|
.size __fa526_proc_info, . - __fa526_proc_info
|