linux/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
Bjorn Andersson 556a76e51b drm: msm: dsi: Don't attempt changing voltage of switches
In some configurations the supplies are voltage switches and not LDOs,
making the set voltage call to fail. Check with the regulator framework
if the supply can change voltage before attempting.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-10-22 15:39:53 -04:00

453 lines
11 KiB
C

/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/platform_device.h>
#include "dsi_phy.h"
#define S_DIV_ROUND_UP(n, d) \
(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
s32 min_result, bool even)
{
s32 v;
v = (tmax - tmin) * percent;
v = S_DIV_ROUND_UP(v, 100) + tmin;
if (even && (v & 0x1))
return max_t(s32, min_result, v - 1);
else
return max_t(s32, min_result, v);
}
static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
s32 ui, s32 coeff, s32 pcnt)
{
s32 tmax, tmin, clk_z;
s32 temp;
/* reset */
temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
if (tmin > 255) {
tmax = 511;
clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
} else {
tmax = 255;
clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
}
/* adjust */
temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
timing->clk_zero = clk_z + 8 - temp;
}
int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
const unsigned long bit_rate, const unsigned long esc_rate)
{
s32 ui, lpx;
s32 tmax, tmin;
s32 pcnt0 = 10;
s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
s32 pcnt2 = 10;
s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
s32 coeff = 1000; /* Precision, should avoid overflow */
s32 temp;
if (!bit_rate || !esc_rate)
return -EINVAL;
ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
temp = lpx / ui;
if (temp & 0x1)
timing->hs_rqst = temp;
else
timing->hs_rqst = max_t(s32, 0, temp - 2);
/* Calculate clk_zero after clk_prepare and hs_rqst */
dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
temp = 105 * coeff + 12 * ui - 20 * coeff;
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
temp = 85 * coeff + 6 * ui;
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
temp = 40 * coeff + 4 * ui;
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
tmax = 255;
temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
temp = 145 * coeff + 10 * ui - temp;
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
temp = 105 * coeff + 12 * ui - 20 * coeff;
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
temp = 60 * coeff + 4 * ui;
tmin = DIV_ROUND_UP(temp, ui) - 2;
timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
tmax = 255;
tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
tmax = 63;
temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
temp = 60 * coeff + 52 * ui - 24 * ui - temp;
tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
timing->clk_post = linear_inter(tmax, tmin, pcnt2, 0, false);
tmax = 63;
temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
temp += 8 * ui + lpx;
tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
if (tmin > tmax) {
temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
timing->clk_pre = temp >> 1;
} else {
timing->clk_pre = linear_inter(tmax, tmin, pcnt2, 0, false);
}
timing->ta_go = 3;
timing->ta_sure = 0;
timing->ta_get = 4;
DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
timing->clk_pre, timing->clk_post, timing->clk_zero,
timing->clk_trail, timing->clk_prepare, timing->hs_exit,
timing->hs_zero, timing->hs_prepare, timing->hs_trail,
timing->hs_rqst);
return 0;
}
void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask)
{
int phy_id = phy->id;
u32 val;
if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
return;
val = dsi_phy_read(phy->base + reg);
if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
dsi_phy_write(phy->base + reg, val | bit_mask);
else
dsi_phy_write(phy->base + reg, val & (~bit_mask));
}
static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
{
struct regulator_bulk_data *s = phy->supplies;
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
struct device *dev = &phy->pdev->dev;
int num = phy->cfg->reg_cfg.num;
int i, ret;
for (i = 0; i < num; i++)
s[i].supply = regs[i].name;
ret = devm_regulator_bulk_get(dev, num, s);
if (ret < 0) {
dev_err(dev, "%s: failed to init regulator, ret=%d\n",
__func__, ret);
return ret;
}
for (i = 0; i < num; i++) {
if (regulator_can_change_voltage(s[i].consumer)) {
ret = regulator_set_voltage(s[i].consumer,
regs[i].min_voltage, regs[i].max_voltage);
if (ret < 0) {
dev_err(dev,
"regulator %d set voltage failed, %d\n",
i, ret);
return ret;
}
}
}
return 0;
}
static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
{
struct regulator_bulk_data *s = phy->supplies;
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
int num = phy->cfg->reg_cfg.num;
int i;
DBG("");
for (i = num - 1; i >= 0; i--)
if (regs[i].disable_load >= 0)
regulator_set_load(s[i].consumer, regs[i].disable_load);
regulator_bulk_disable(num, s);
}
static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
{
struct regulator_bulk_data *s = phy->supplies;
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
struct device *dev = &phy->pdev->dev;
int num = phy->cfg->reg_cfg.num;
int ret, i;
DBG("");
for (i = 0; i < num; i++) {
if (regs[i].enable_load >= 0) {
ret = regulator_set_load(s[i].consumer,
regs[i].enable_load);
if (ret < 0) {
dev_err(dev,
"regulator %d set op mode failed, %d\n",
i, ret);
goto fail;
}
}
}
ret = regulator_bulk_enable(num, s);
if (ret < 0) {
dev_err(dev, "regulator enable failed, %d\n", ret);
goto fail;
}
return 0;
fail:
for (i--; i >= 0; i--)
regulator_set_load(s[i].consumer, regs[i].disable_load);
return ret;
}
static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
{
struct device *dev = &phy->pdev->dev;
int ret;
pm_runtime_get_sync(dev);
ret = clk_prepare_enable(phy->ahb_clk);
if (ret) {
dev_err(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
pm_runtime_put_sync(dev);
}
return ret;
}
static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
{
clk_disable_unprepare(phy->ahb_clk);
pm_runtime_put_sync(&phy->pdev->dev);
}
static const struct of_device_id dsi_phy_dt_match[] = {
#ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
{ .compatible = "qcom,dsi-phy-28nm-hpm",
.data = &dsi_phy_28nm_hpm_cfgs },
{ .compatible = "qcom,dsi-phy-28nm-lp",
.data = &dsi_phy_28nm_lp_cfgs },
#endif
#ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
{ .compatible = "qcom,dsi-phy-20nm",
.data = &dsi_phy_20nm_cfgs },
#endif
{}
};
static int dsi_phy_driver_probe(struct platform_device *pdev)
{
struct msm_dsi_phy *phy;
struct device *dev = &pdev->dev;
const struct of_device_id *match;
int ret;
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
match = of_match_node(dsi_phy_dt_match, dev->of_node);
if (!match)
return -ENODEV;
phy->cfg = match->data;
phy->pdev = pdev;
ret = of_property_read_u32(dev->of_node,
"qcom,dsi-phy-index", &phy->id);
if (ret) {
dev_err(dev, "%s: PHY index not specified, %d\n",
__func__, ret);
goto fail;
}
phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
"qcom,dsi-phy-regulator-ldo-mode");
phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
if (IS_ERR(phy->base)) {
dev_err(dev, "%s: failed to map phy base\n", __func__);
ret = -ENOMEM;
goto fail;
}
phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator",
"DSI_PHY_REG");
if (IS_ERR(phy->reg_base)) {
dev_err(dev, "%s: failed to map phy regulator base\n",
__func__);
ret = -ENOMEM;
goto fail;
}
ret = dsi_phy_regulator_init(phy);
if (ret) {
dev_err(dev, "%s: failed to init regulator\n", __func__);
goto fail;
}
phy->ahb_clk = devm_clk_get(dev, "iface_clk");
if (IS_ERR(phy->ahb_clk)) {
dev_err(dev, "%s: Unable to get ahb clk\n", __func__);
ret = PTR_ERR(phy->ahb_clk);
goto fail;
}
/* PLL init will call into clk_register which requires
* register access, so we need to enable power and ahb clock.
*/
ret = dsi_phy_enable_resource(phy);
if (ret)
goto fail;
phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
if (!phy->pll)
dev_info(dev,
"%s: pll init failed, need separate pll clk driver\n",
__func__);
dsi_phy_disable_resource(phy);
platform_set_drvdata(pdev, phy);
return 0;
fail:
return ret;
}
static int dsi_phy_driver_remove(struct platform_device *pdev)
{
struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
if (phy && phy->pll) {
msm_dsi_pll_destroy(phy->pll);
phy->pll = NULL;
}
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver dsi_phy_platform_driver = {
.probe = dsi_phy_driver_probe,
.remove = dsi_phy_driver_remove,
.driver = {
.name = "msm_dsi_phy",
.of_match_table = dsi_phy_dt_match,
},
};
void __init msm_dsi_phy_driver_register(void)
{
platform_driver_register(&dsi_phy_platform_driver);
}
void __exit msm_dsi_phy_driver_unregister(void)
{
platform_driver_unregister(&dsi_phy_platform_driver);
}
int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
const unsigned long bit_rate, const unsigned long esc_rate)
{
struct device *dev = &phy->pdev->dev;
int ret;
if (!phy || !phy->cfg->ops.enable)
return -EINVAL;
ret = dsi_phy_regulator_enable(phy);
if (ret) {
dev_err(dev, "%s: regulator enable failed, %d\n",
__func__, ret);
return ret;
}
ret = phy->cfg->ops.enable(phy, src_pll_id, bit_rate, esc_rate);
if (ret) {
dev_err(dev, "%s: phy enable failed, %d\n", __func__, ret);
dsi_phy_regulator_disable(phy);
return ret;
}
return 0;
}
void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
{
if (!phy || !phy->cfg->ops.disable)
return;
phy->cfg->ops.disable(phy);
dsi_phy_regulator_disable(phy);
}
void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
u32 *clk_pre, u32 *clk_post)
{
if (!phy)
return;
if (clk_pre)
*clk_pre = phy->timing.clk_pre;
if (clk_post)
*clk_post = phy->timing.clk_post;
}
struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
{
if (!phy)
return NULL;
return phy->pll;
}