linux/drivers/net/wireless/iwlwifi/iwl-power.c
Emmanuel Grumbach c90a74bae1 iwlwifi: allow association on radar channel in power save
This patch disables power save upon association and enables it back
after association. This allows to associate to AP on a radar channel
if power save is enabled.

Radar and passive channels are not allowed for TX (required for association)
unless RX is received but PS may close the radio and no RX will be received
effectively failing association.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08 14:23:19 -04:00

466 lines
13 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* James P. Ketrenos <ipw2100-admin@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-commands.h"
#include "iwl-debug.h"
#include "iwl-power.h"
#include "iwl-helpers.h"
/*
* Setting power level allow the card to go to sleep when not busy
* there are three factor that decide the power level to go to, they
* are list here with its priority
* 1- critical_power_setting this will be set according to card temperature.
* 2- system_power_setting this will be set by system PM manager.
* 3- user_power_setting this will be set by user either by writing to sys or
* mac80211
*
* if system_power_setting and user_power_setting is set to auto
* the power level will be decided according to association status and battery
* status.
*
*/
#define MSEC_TO_USEC 1024
#define IWL_POWER_RANGE_0_MAX (2)
#define IWL_POWER_RANGE_1_MAX (10)
#define NOSLP __constant_cpu_to_le16(0), 0, 0
#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
#define SLP_TOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC)
#define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \
__constant_cpu_to_le32(X1), \
__constant_cpu_to_le32(X2), \
__constant_cpu_to_le32(X3), \
__constant_cpu_to_le32(X4)}
#define IWL_POWER_ON_BATTERY IWL_POWER_INDEX_5
#define IWL_POWER_ON_AC_DISASSOC IWL_POWER_MODE_CAM
#define IWL_POWER_ON_AC_ASSOC IWL_POWER_MODE_CAM
#define IWL_CT_KILL_TEMPERATURE 110
#define IWL_MIN_POWER_TEMPERATURE 100
#define IWL_REDUCED_POWER_TEMPERATURE 95
/* default power management (not Tx power) table values */
/* for tim 0-10 */
static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
};
/* for tim = 3-10 */
static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
};
/* for tim > 11 */
static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = {
{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
};
/* set card power command */
static int iwl_set_power(struct iwl_priv *priv, void *cmd)
{
return iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD,
sizeof(struct iwl_powertable_cmd),
cmd, NULL);
}
/* decide the right power level according to association status
* and battery status
*/
static u16 iwl_get_auto_power_mode(struct iwl_priv *priv)
{
u16 mode;
switch (priv->power_data.user_power_setting) {
case IWL_POWER_AUTO:
/* if running on battery */
if (priv->power_data.is_battery_active)
mode = IWL_POWER_ON_BATTERY;
else if (iwl_is_associated(priv))
mode = IWL_POWER_ON_AC_ASSOC;
else
mode = IWL_POWER_ON_AC_DISASSOC;
break;
/* FIXME: remove battery and ac from here */
case IWL_POWER_BATTERY:
mode = IWL_POWER_INDEX_3;
break;
case IWL_POWER_AC:
mode = IWL_POWER_MODE_CAM;
break;
default:
mode = priv->power_data.user_power_setting;
break;
}
return mode;
}
/* initialize to default */
static int iwl_power_init_handle(struct iwl_priv *priv)
{
struct iwl_power_mgr *pow_data;
int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX;
struct iwl_powertable_cmd *cmd;
int i;
u16 pci_pm;
IWL_DEBUG_POWER("Initialize power \n");
pow_data = &(priv->power_data);
memset(pow_data, 0, sizeof(*pow_data));
memcpy(&pow_data->pwr_range_0[0], &range_0[0], size);
memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
memcpy(&pow_data->pwr_range_2[0], &range_2[0], size);
pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &pci_pm);
IWL_DEBUG_POWER("adjust power command flags\n");
for (i = 0; i < IWL_POWER_MAX; i++) {
cmd = &pow_data->pwr_range_0[i].cmd;
if (pci_pm & PCI_CFG_LINK_CTRL_VAL_L0S_EN)
cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
else
cmd->flags |= IWL_POWER_PCI_PM_MSK;
}
return 0;
}
/* adjust power command according to dtim period and power level*/
static int iwl_update_power_command(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd,
u16 mode)
{
int ret = 0, i;
u8 skip;
u32 max_sleep = 0;
struct iwl_power_vec_entry *range;
u8 period = 0;
struct iwl_power_mgr *pow_data;
if (mode > IWL_POWER_INDEX_5) {
IWL_DEBUG_POWER("Error invalid power mode \n");
return -1;
}
pow_data = &(priv->power_data);
if (pow_data->dtim_period <= IWL_POWER_RANGE_0_MAX)
range = &pow_data->pwr_range_0[0];
else if (pow_data->dtim_period <= IWL_POWER_RANGE_1_MAX)
range = &pow_data->pwr_range_1[0];
else
range = &pow_data->pwr_range_2[0];
period = pow_data->dtim_period;
memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd));
if (period == 0) {
period = 1;
skip = 0;
} else
skip = range[mode].no_dtim;
if (skip == 0) {
max_sleep = period;
cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
} else {
__le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
max_sleep = le32_to_cpu(slp_itrvl);
if (max_sleep == 0xFF)
max_sleep = period * (skip + 1);
else if (max_sleep > period)
max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
}
for (i = 0; i < IWL_POWER_VEC_SIZE; i++) {
if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
}
IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags);
IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
le32_to_cpu(cmd->sleep_interval[0]),
le32_to_cpu(cmd->sleep_interval[1]),
le32_to_cpu(cmd->sleep_interval[2]),
le32_to_cpu(cmd->sleep_interval[3]),
le32_to_cpu(cmd->sleep_interval[4]));
return ret;
}
/*
* calucaute the final power mode index
*/
int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh)
{
struct iwl_power_mgr *setting = &(priv->power_data);
int ret = 0;
u16 uninitialized_var(final_mode);
/* If on battery, set to 3,
* if plugged into AC power, set to CAM ("continuously aware mode"),
* else user level */
switch (setting->system_power_setting) {
case IWL_POWER_SYS_AUTO:
final_mode = iwl_get_auto_power_mode(priv);
break;
case IWL_POWER_SYS_BATTERY:
final_mode = IWL_POWER_INDEX_3;
break;
case IWL_POWER_SYS_AC:
final_mode = IWL_POWER_MODE_CAM;
break;
default:
final_mode = IWL_POWER_INDEX_3;
WARN_ON(1);
}
if (setting->critical_power_setting > final_mode)
final_mode = setting->critical_power_setting;
/* driver only support CAM for non STA network */
if (priv->iw_mode != IEEE80211_IF_TYPE_STA)
final_mode = IWL_POWER_MODE_CAM;
if (!iwl_is_rfkill(priv) && !setting->power_disabled &&
((setting->power_mode != final_mode) || refresh)) {
struct iwl_powertable_cmd cmd;
if (final_mode != IWL_POWER_MODE_CAM)
set_bit(STATUS_POWER_PMI, &priv->status);
iwl_update_power_command(priv, &cmd, final_mode);
cmd.keep_alive_beacons = 0;
if (final_mode == IWL_POWER_INDEX_5)
cmd.flags |= IWL_POWER_FAST_PD;
ret = iwl_set_power(priv, &cmd);
if (final_mode == IWL_POWER_MODE_CAM)
clear_bit(STATUS_POWER_PMI, &priv->status);
else
set_bit(STATUS_POWER_PMI, &priv->status);
if (priv->cfg->ops->lib->update_chain_flags)
priv->cfg->ops->lib->update_chain_flags(priv);
if (!ret)
setting->power_mode = final_mode;
}
return ret;
}
EXPORT_SYMBOL(iwl_power_update_mode);
/* Allow other iwl code to disable/enable power management active
* this will be usefull for rate scale to disable PM during heavy
* Tx/Rx activities
*/
int iwl_power_disable_management(struct iwl_priv *priv, u32 ms)
{
u16 prev_mode;
int ret = 0;
if (priv->power_data.power_disabled)
return -EBUSY;
prev_mode = priv->power_data.user_power_setting;
priv->power_data.user_power_setting = IWL_POWER_MODE_CAM;
ret = iwl_power_update_mode(priv, 0);
priv->power_data.power_disabled = 1;
priv->power_data.user_power_setting = prev_mode;
cancel_delayed_work(&priv->set_power_save);
if (ms)
queue_delayed_work(priv->workqueue, &priv->set_power_save,
msecs_to_jiffies(ms));
return ret;
}
EXPORT_SYMBOL(iwl_power_disable_management);
/* Allow other iwl code to disable/enable power management active
* this will be usefull for rate scale to disable PM during hight
* valume activities
*/
int iwl_power_enable_management(struct iwl_priv *priv)
{
int ret = 0;
priv->power_data.power_disabled = 0;
ret = iwl_power_update_mode(priv, 0);
return ret;
}
EXPORT_SYMBOL(iwl_power_enable_management);
/* set user_power_setting */
int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode)
{
int ret = 0;
if (mode > IWL_POWER_LIMIT)
return -EINVAL;
priv->power_data.user_power_setting = mode;
ret = iwl_power_update_mode(priv, 0);
return ret;
}
EXPORT_SYMBOL(iwl_power_set_user_mode);
/* set system_power_setting. This should be set by over all
* PM application.
*/
int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode)
{
int ret = 0;
if (mode > IWL_POWER_LIMIT)
return -EINVAL;
priv->power_data.system_power_setting = mode;
ret = iwl_power_update_mode(priv, 0);
return ret;
}
EXPORT_SYMBOL(iwl_power_set_system_mode);
/* initilize to default */
void iwl_power_initialize(struct iwl_priv *priv)
{
iwl_power_init_handle(priv);
priv->power_data.user_power_setting = IWL_POWER_AUTO;
priv->power_data.power_disabled = 0;
priv->power_data.system_power_setting = IWL_POWER_SYS_AUTO;
priv->power_data.is_battery_active = 0;
priv->power_data.power_disabled = 0;
priv->power_data.critical_power_setting = 0;
}
EXPORT_SYMBOL(iwl_power_initialize);
/* set critical_power_setting according to temperature value */
int iwl_power_temperature_change(struct iwl_priv *priv)
{
int ret = 0;
u16 new_critical = priv->power_data.critical_power_setting;
s32 temperature = KELVIN_TO_CELSIUS(priv->last_temperature);
if (temperature > IWL_CT_KILL_TEMPERATURE)
return 0;
else if (temperature > IWL_MIN_POWER_TEMPERATURE)
new_critical = IWL_POWER_INDEX_5;
else if (temperature > IWL_REDUCED_POWER_TEMPERATURE)
new_critical = IWL_POWER_INDEX_3;
else
new_critical = IWL_POWER_MODE_CAM;
if (new_critical != priv->power_data.critical_power_setting)
priv->power_data.critical_power_setting = new_critical;
if (priv->power_data.critical_power_setting >
priv->power_data.power_mode)
ret = iwl_power_update_mode(priv, 0);
return ret;
}
EXPORT_SYMBOL(iwl_power_temperature_change);
static void iwl_bg_set_power_save(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work,
struct iwl_priv, set_power_save.work);
IWL_DEBUG(IWL_DL_STATE, "update power\n");
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
mutex_lock(&priv->mutex);
/* on starting association we disable power managment
* until association, if association failed then this
* timer will expire and enable PM again.
*/
if (!iwl_is_associated(priv))
iwl_power_enable_management(priv);
mutex_unlock(&priv->mutex);
}
void iwl_setup_power_deferred_work(struct iwl_priv *priv)
{
INIT_DELAYED_WORK(&priv->set_power_save, iwl_bg_set_power_save);
}
EXPORT_SYMBOL(iwl_setup_power_deferred_work);
void iwl_power_cancel_timeout(struct iwl_priv *priv)
{
cancel_delayed_work(&priv->set_power_save);
}
EXPORT_SYMBOL(iwl_power_cancel_timeout);