leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c8fb7948dc
linux/drivers/net/cris/eth_v10.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h 
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

1830 lines
52 KiB
C
Raw Blame History

/* $Id: ethernet.c,v 1.31 2004/10/18 14:49:03 starvik Exp $
*
* e100net.c: A network driver for the ETRAX 100LX network controller.
*
* Copyright (c) 1998-2002 Axis Communications AB.
*
* The outline of this driver comes from skeleton.c.
*
* $Log: ethernet.c,v $
* Revision 1.31 2004/10/18 14:49:03 starvik
* Use RX interrupt as random source
*
* Revision 1.30 2004/09/29 10:44:04 starvik
* Enabed MAC-address output again
*
* Revision 1.29 2004/08/24 07:14:05 starvik
* Make use of generic MDIO interface and constants.
*
* Revision 1.28 2004/08/20 09:37:11 starvik
* Added support for Intel LXT972A. Creds to Randy Scarborough.
*
* Revision 1.27 2004/08/16 12:37:22 starvik
* Merge of Linux 2.6.8
*
* Revision 1.25 2004/06/21 10:29:57 starvik
* Merge of Linux 2.6.7
*
* Revision 1.23 2004/06/09 05:29:22 starvik
* Avoid any race where R_DMA_CH1_FIRST is NULL (may trigger cache bug).
*
* Revision 1.22 2004/05/14 07:58:03 starvik
* Merge of changes from 2.4
*
* Revision 1.20 2004/03/11 11:38:40 starvik
* Merge of Linux 2.6.4
*
* Revision 1.18 2003/12/03 13:45:46 starvik
* Use hardware pad for short packets to prevent information leakage.
*
* Revision 1.17 2003/07/04 08:27:37 starvik
* Merge of Linux 2.5.74
*
* Revision 1.16 2003/04/24 08:28:22 starvik
* New LED behaviour: LED off when no link
*
* Revision 1.15 2003/04/09 05:20:47 starvik
* Merge of Linux 2.5.67
*
* Revision 1.13 2003/03/06 16:11:01 henriken
* Off by one error in group address register setting.
*
* Revision 1.12 2003/02/27 17:24:19 starvik
* Corrected Rev to Revision
*
* Revision 1.11 2003/01/24 09:53:21 starvik
* Oops. Initialize GA to 0, not to 1
*
* Revision 1.10 2003/01/24 09:50:55 starvik
* Initialize GA_0 and GA_1 to 0 to avoid matching of unwanted packets
*
* Revision 1.9 2002/12/13 07:40:58 starvik
* Added basic ethtool interface
* Handled out of memory when allocating new buffers
*
* Revision 1.8 2002/12/11 13:13:57 starvik
* Added arch/ to v10 specific includes
* Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
*
* Revision 1.7 2002/11/26 09:41:42 starvik
* Added e100_set_config (standard interface to set media type)
* Added protection against preemptive scheduling
* Added standard MII ioctls
*
* Revision 1.6 2002/11/21 07:18:18 starvik
* Timers must be initialized in 2.5.48
*
* Revision 1.5 2002/11/20 11:56:11 starvik
* Merge of Linux 2.5.48
*
* Revision 1.4 2002/11/18 07:26:46 starvik
* Linux 2.5 port of latest Linux 2.4 ethernet driver
*
* Revision 1.33 2002/10/02 20:16:17 hp
* SETF, SETS: Use underscored IO_x_ macros rather than incorrect token concatenation
*
* Revision 1.32 2002/09/16 06:05:58 starvik
* Align memory returned by dev_alloc_skb
* Moved handling of sent packets to interrupt to avoid reference counting problem
*
* Revision 1.31 2002/09/10 13:28:23 larsv
* Return -EINVAL for unknown ioctls to avoid confusing tools that tests
* for supported functionality by issuing special ioctls, i.e. wireless
* extensions.
*
* Revision 1.30 2002/05/07 18:50:08 johana
* Correct spelling in comments.
*
* Revision 1.29 2002/05/06 05:38:49 starvik
* Performance improvements:
* Large packets are not copied (breakpoint set to 256 bytes)
* The cache bug workaround is delayed until half of the receive list
* has been used
* Added transmit list
* Transmit interrupts are only enabled when transmit queue is full
*
* Revision 1.28.2.1 2002/04/30 08:15:51 starvik
* Performance improvements:
* Large packets are not copied (breakpoint set to 256 bytes)
* The cache bug workaround is delayed until half of the receive list
* has been used.
* Added transmit list
* Transmit interrupts are only enabled when transmit queue is full
*
* Revision 1.28 2002/04/22 11:47:21 johana
* Fix according to 2.4.19-pre7. time_after/time_before and
* missing end of comment.
* The patch has a typo for ethernet.c in e100_clear_network_leds(),
* that is fixed here.
*
* Revision 1.27 2002/04/12 11:55:11 bjornw
* Added TODO
*
* Revision 1.26 2002/03/15 17:11:02 bjornw
* Use prepare_rx_descriptor after the CPU has touched the receiving descs
*
* Revision 1.25 2002/03/08 13:07:53 bjornw
* Unnecessary spinlock removed
*
* Revision 1.24 2002/02/20 12:57:43 fredriks
* Replaced MIN() with min().
*
* Revision 1.23 2002/02/20 10:58:14 fredriks
* Strip the Ethernet checksum (4 bytes) before forwarding a frame to upper layers.
*
* Revision 1.22 2002/01/30 07:48:22 matsfg
* Initiate R_NETWORK_TR_CTRL
*
* Revision 1.21 2001/11/23 11:54:49 starvik
* Added IFF_PROMISC and IFF_ALLMULTI handling in set_multicast_list
* Removed compiler warnings
*
* Revision 1.20 2001/11/12 19:26:00 pkj
* * Corrected e100_negotiate() to not assign half to current_duplex when
* it was supposed to compare them...
* * Cleaned up failure handling in e100_open().
* * Fixed compiler warnings.
*
* Revision 1.19 2001/11/09 07:43:09 starvik
* Added full duplex support
* Added ioctl to set speed and duplex
* Clear LED timer only runs when LED is lit
*
* Revision 1.18 2001/10/03 14:40:43 jonashg
* Update rx_bytes counter.
*
* Revision 1.17 2001/06/11 12:43:46 olof
* Modified defines for network LED behavior
*
* Revision 1.16 2001/05/30 06:12:46 markusl
* TxDesc.next should not be set to NULL
*
* Revision 1.15 2001/05/29 10:27:04 markusl
* Updated after review remarks:
* +Use IO_EXTRACT
* +Handle underrun
*
* Revision 1.14 2001/05/29 09:20:14 jonashg
* Use driver name on printk output so one can tell which driver that complains.
*
* Revision 1.13 2001/05/09 12:35:59 johana
* Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h
*
* Revision 1.12 2001/04/05 11:43:11 tobiasa
* Check dev before panic.
*
* Revision 1.11 2001/04/04 11:21:05 markusl
* Updated according to review remarks
*
* Revision 1.10 2001/03/26 16:03:06 bjornw
* Needs linux/config.h
*
* Revision 1.9 2001/03/19 14:47:48 pkj
* * Make sure there is always a pause after the network LEDs are
* changed so they will not look constantly lit during heavy traffic.
* * Always use HZ when setting times relative to jiffies.
* * Use LED_NETWORK_SET() when setting the network LEDs.
*
* Revision 1.8 2001/02/27 13:52:48 bjornw
* malloc.h -> slab.h
*
* Revision 1.7 2001/02/23 13:46:38 bjornw
* Spellling check
*
* Revision 1.6 2001/01/26 15:21:04 starvik
* Don't disable interrupts while reading MDIO registers (MDIO is slow)
* Corrected promiscuous mode
* Improved deallocation of IRQs ("ifconfig eth0 down" now works)
*
* Revision 1.5 2000/11/29 17:22:22 bjornw
* Get rid of the udword types legacy stuff
*
* Revision 1.4 2000/11/22 16:36:09 bjornw
* Please marketing by using the correct case when spelling Etrax.
*
* Revision 1.3 2000/11/21 16:43:04 bjornw
* Minor short->int change
*
* Revision 1.2 2000/11/08 14:27:57 bjornw
* 2.4 port
*
* Revision 1.1 2000/11/06 13:56:00 bjornw
* Verbatim copy of the 1.24 version of e100net.c from elinux
*
* Revision 1.24 2000/10/04 15:55:23 bjornw
* * Use virt_to_phys etc. for DMA addresses
* * Removed bogus CHECKSUM_UNNECESSARY
*
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/if.h>
#include <linux/mii.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/ethtool.h>
#include <asm/arch/svinto.h>/* DMA and register descriptions */
#include <asm/io.h> /* LED_* I/O functions */
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/system.h>
#include <asm/bitops.h>
#include <asm/ethernet.h>
#include <asm/cache.h>
//#define ETHDEBUG
#define D(x)
/*
* The name of the card. Is used for messages and in the requests for
* io regions, irqs and dma channels
*/
static const char* cardname = "ETRAX 100LX built-in ethernet controller";
/* A default ethernet address. Highlevel SW will set the real one later */
static struct sockaddr default_mac = {
0,
{ 0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00 }
};
/* Information that need to be kept for each board. */
struct net_local {
struct net_device_stats stats;
struct mii_if_info mii_if;
/* Tx control lock. This protects the transmit buffer ring
* state along with the "tx full" state of the driver. This
* means all netif_queue flow control actions are protected
* by this lock as well.
*/
spinlock_t lock;
};
typedef struct etrax_eth_descr
{
etrax_dma_descr descr;
struct sk_buff* skb;
} etrax_eth_descr;
/* Some transceivers requires special handling */
struct transceiver_ops
{
unsigned int oui;
void (*check_speed)(struct net_device* dev);
void (*check_duplex)(struct net_device* dev);
};
struct transceiver_ops* transceiver;
/* Duplex settings */
enum duplex
{
half,
full,
autoneg
};
/* Dma descriptors etc. */
#define MAX_MEDIA_DATA_SIZE 1518
#define MIN_PACKET_LEN 46
#define ETHER_HEAD_LEN 14
/*
** MDIO constants.
*/
#define MDIO_START 0x1
#define MDIO_READ 0x2
#define MDIO_WRITE 0x1
#define MDIO_PREAMBLE 0xfffffffful
/* Broadcom specific */
#define MDIO_AUX_CTRL_STATUS_REG 0x18
#define MDIO_BC_FULL_DUPLEX_IND 0x1
#define MDIO_BC_SPEED 0x2
/* TDK specific */
#define MDIO_TDK_DIAGNOSTIC_REG 18
#define MDIO_TDK_DIAGNOSTIC_RATE 0x400
#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800
/*Intel LXT972A specific*/
#define MDIO_INT_STATUS_REG_2 0x0011
#define MDIO_INT_FULL_DUPLEX_IND ( 1 << 9 )
#define MDIO_INT_SPEED ( 1 << 14 )
/* Network flash constants */
#define NET_FLASH_TIME (HZ/50) /* 20 ms */
#define NET_FLASH_PAUSE (HZ/100) /* 10 ms */
#define NET_LINK_UP_CHECK_INTERVAL (2*HZ) /* 2 s */
#define NET_DUPLEX_CHECK_INTERVAL (2*HZ) /* 2 s */
#define NO_NETWORK_ACTIVITY 0
#define NETWORK_ACTIVITY 1
#define NBR_OF_RX_DESC 64
#define NBR_OF_TX_DESC 256
/* Large packets are sent directly to upper layers while small packets are */
/* copied (to reduce memory waste). The following constant decides the breakpoint */
#define RX_COPYBREAK 256
/* Due to a chip bug we need to flush the cache when descriptors are returned */
/* to the DMA. To decrease performance impact we return descriptors in chunks. */
/* The following constant determines the number of descriptors to return. */
#define RX_QUEUE_THRESHOLD NBR_OF_RX_DESC/2
#define GET_BIT(bit,val) (((val) >> (bit)) & 0x01)
/* Define some macros to access ETRAX 100 registers */
#define SETF(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
IO_FIELD_(reg##_, field##_, val)
#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
IO_STATE_(reg##_, field##_, _##val)
static etrax_eth_descr *myNextRxDesc; /* Points to the next descriptor to
to be processed */
static etrax_eth_descr *myLastRxDesc; /* The last processed descriptor */
static etrax_eth_descr *myPrevRxDesc; /* The descriptor right before myNextRxDesc */
static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32)));
static etrax_eth_descr* myFirstTxDesc; /* First packet not yet sent */
static etrax_eth_descr* myLastTxDesc; /* End of send queue */
static etrax_eth_descr* myNextTxDesc; /* Next descriptor to use */
static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32)));
static unsigned int network_rec_config_shadow = 0;
static unsigned int mdio_phy_addr; /* Transciever address */
static unsigned int network_tr_ctrl_shadow = 0;
/* Network speed indication. */
static DEFINE_TIMER(speed_timer, NULL, 0, 0);
static DEFINE_TIMER(clear_led_timer, NULL, 0, 0);
static int current_speed; /* Speed read from transceiver */
static int current_speed_selection; /* Speed selected by user */
static unsigned long led_next_time;
static int led_active;
static int rx_queue_len;
/* Duplex */
static DEFINE_TIMER(duplex_timer, NULL, 0, 0);
static int full_duplex;
static enum duplex current_duplex;
/* Index to functions, as function prototypes. */
static int etrax_ethernet_init(void);
static int e100_open(struct net_device *dev);
static int e100_set_mac_address(struct net_device *dev, void *addr);
static int e100_send_packet(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t e100rxtx_interrupt(int irq, void *dev_id);
static irqreturn_t e100nw_interrupt(int irq, void *dev_id);
static void e100_rx(struct net_device *dev);
static int e100_close(struct net_device *dev);
static int e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
static int e100_set_config(struct net_device* dev, struct ifmap* map);
static void e100_tx_timeout(struct net_device *dev);
static struct net_device_stats *e100_get_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static void e100_hardware_send_packet(char *buf, int length);
static void update_rx_stats(struct net_device_stats *);
static void update_tx_stats(struct net_device_stats *);
static int e100_probe_transceiver(struct net_device* dev);
static void e100_check_speed(unsigned long priv);
static void e100_set_speed(struct net_device* dev, unsigned long speed);
static void e100_check_duplex(unsigned long priv);
static void e100_set_duplex(struct net_device* dev, enum duplex);
static void e100_negotiate(struct net_device* dev);
static int e100_get_mdio_reg(struct net_device *dev, int phy_id, int location);
static void e100_set_mdio_reg(struct net_device *dev, int phy_id, int location, int value);
static void e100_send_mdio_cmd(unsigned short cmd, int write_cmd);
static void e100_send_mdio_bit(unsigned char bit);
static unsigned char e100_receive_mdio_bit(void);
static void e100_reset_transceiver(struct net_device* net);
static void e100_clear_network_leds(unsigned long dummy);
static void e100_set_network_leds(int active);
static const struct ethtool_ops e100_ethtool_ops;
static void broadcom_check_speed(struct net_device* dev);
static void broadcom_check_duplex(struct net_device* dev);
static void tdk_check_speed(struct net_device* dev);
static void tdk_check_duplex(struct net_device* dev);
static void intel_check_speed(struct net_device* dev);
static void intel_check_duplex(struct net_device* dev);
static void generic_check_speed(struct net_device* dev);
static void generic_check_duplex(struct net_device* dev);
struct transceiver_ops transceivers[] =
{
{0x1018, broadcom_check_speed, broadcom_check_duplex}, /* Broadcom */
{0xC039, tdk_check_speed, tdk_check_duplex}, /* TDK 2120 */
{0x039C, tdk_check_speed, tdk_check_duplex}, /* TDK 2120C */
{0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/
{0x0000, generic_check_speed, generic_check_duplex} /* Generic, must be last */
};
#define tx_done(dev) (*R_DMA_CH0_CMD == 0)
/*
* Check for a network adaptor of this type, and return '0' if one exists.
* If dev->base_addr == 0, probe all likely locations.
* If dev->base_addr == 1, always return failure.
* If dev->base_addr == 2, allocate space for the device and return success
* (detachable devices only).
*/
static int __init
etrax_ethernet_init(void)
{
struct net_device *dev;
struct net_local* np;
int i, err;
printk(KERN_INFO
"ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2003 Axis Communications AB\n");
dev = alloc_etherdev(sizeof(struct net_local));
np = dev->priv;
if (!dev)
return -ENOMEM;
dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */
/* now setup our etrax specific stuff */
dev->irq = NETWORK_DMA_RX_IRQ_NBR; /* we really use DMATX as well... */
dev->dma = NETWORK_RX_DMA_NBR;
/* fill in our handlers so the network layer can talk to us in the future */
dev->open = e100_open;
dev->hard_start_xmit = e100_send_packet;
dev->stop = e100_close;
dev->get_stats = e100_get_stats;
dev->set_multicast_list = set_multicast_list;
dev->set_mac_address = e100_set_mac_address;
dev->ethtool_ops = &e100_ethtool_ops;
dev->do_ioctl = e100_ioctl;
dev->set_config = e100_set_config;
dev->tx_timeout = e100_tx_timeout;
/* Initialise the list of Etrax DMA-descriptors */
/* Initialise receive descriptors */
for (i = 0; i < NBR_OF_RX_DESC; i++) {
/* Allocate two extra cachelines to make sure that buffer used by DMA
* does not share cacheline with any other data (to avoid cache bug)
*/
RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
if (!RxDescList[i].skb)
return -ENOMEM;
RxDescList[i].descr.ctrl = 0;
RxDescList[i].descr.sw_len = MAX_MEDIA_DATA_SIZE;
RxDescList[i].descr.next = virt_to_phys(&RxDescList[i + 1]);
RxDescList[i].descr.buf = L1_CACHE_ALIGN(virt_to_phys(RxDescList[i].skb->data));
RxDescList[i].descr.status = 0;
RxDescList[i].descr.hw_len = 0;
prepare_rx_descriptor(&RxDescList[i].descr);
}
RxDescList[NBR_OF_RX_DESC - 1].descr.ctrl = d_eol;
RxDescList[NBR_OF_RX_DESC - 1].descr.next = virt_to_phys(&RxDescList[0]);
rx_queue_len = 0;
/* Initialize transmit descriptors */
for (i = 0; i < NBR_OF_TX_DESC; i++) {
TxDescList[i].descr.ctrl = 0;
TxDescList[i].descr.sw_len = 0;
TxDescList[i].descr.next = virt_to_phys(&TxDescList[i + 1].descr);
TxDescList[i].descr.buf = 0;
TxDescList[i].descr.status = 0;
TxDescList[i].descr.hw_len = 0;
TxDescList[i].skb = 0;
}
TxDescList[NBR_OF_TX_DESC - 1].descr.ctrl = d_eol;
TxDescList[NBR_OF_TX_DESC - 1].descr.next = virt_to_phys(&TxDescList[0].descr);
/* Initialise initial pointers */
myNextRxDesc = &RxDescList[0];
myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
myFirstTxDesc = &TxDescList[0];
myNextTxDesc = &TxDescList[0];
myLastTxDesc = &TxDescList[NBR_OF_TX_DESC - 1];
/* Register device */
err = register_netdev(dev);
if (err) {
free_netdev(dev);
return err;
}
/* set the default MAC address */
e100_set_mac_address(dev, &default_mac);
/* Initialize speed indicator stuff. */
current_speed = 10;
current_speed_selection = 0; /* Auto */
speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
duplex_timer.data = (unsigned long)dev;
speed_timer.function = e100_check_speed;
clear_led_timer.function = e100_clear_network_leds;
full_duplex = 0;
current_duplex = autoneg;
duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
duplex_timer.data = (unsigned long)dev;
duplex_timer.function = e100_check_duplex;
/* Initialize mii interface */
np->mii_if.phy_id = mdio_phy_addr;
np->mii_if.phy_id_mask = 0x1f;
np->mii_if.reg_num_mask = 0x1f;
np->mii_if.dev = dev;
np->mii_if.mdio_read = e100_get_mdio_reg;
np->mii_if.mdio_write = e100_set_mdio_reg;
/* Initialize group address registers to make sure that no */
/* unwanted addresses are matched */
*R_NETWORK_GA_0 = 0x00000000;
*R_NETWORK_GA_1 = 0x00000000;
return 0;
}
/* set MAC address of the interface. called from the core after a
* SIOCSIFADDR ioctl, and from the bootup above.
*/
static int
e100_set_mac_address(struct net_device *dev, void *p)
{
struct net_local *np = (struct net_local *)dev->priv;
struct sockaddr *addr = p;
int i;
spin_lock(&np->lock); /* preemption protection */
/* remember it */
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
/* Write it to the hardware.
* Note the way the address is wrapped:
* *R_NETWORK_SA_0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24);
* *R_NETWORK_SA_1 = a0_4 | (a0_5 << 8);
*/
*R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
(dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24);
*R_NETWORK_SA_1 = dev->dev_addr[4] | (dev->dev_addr[5] << 8);
*R_NETWORK_SA_2 = 0;
/* show it in the log as well */
printk(KERN_INFO "%s: changed MAC to ", dev->name);
for (i = 0; i < 5; i++)
printk("%02X:", dev->dev_addr[i]);
printk("%02X\n", dev->dev_addr[i]);
spin_unlock(&np->lock);
return 0;
}
/*
* Open/initialize the board. This is called (in the current kernel)
* sometime after booting when the 'ifconfig' program is run.
*
* This routine should set everything up anew at each open, even
* registers that "should" only need to be set once at boot, so that
* there is non-reboot way to recover if something goes wrong.
*/
static int
e100_open(struct net_device *dev)
{
unsigned long flags;
/* enable the MDIO output pin */
*R_NETWORK_MGM_CTRL = IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable);
*R_IRQ_MASK0_CLR =
IO_STATE(R_IRQ_MASK0_CLR, overrun, clr) |
IO_STATE(R_IRQ_MASK0_CLR, underrun, clr) |
IO_STATE(R_IRQ_MASK0_CLR, excessive_col, clr);
/* clear dma0 and 1 eop and descr irq masks */
*R_IRQ_MASK2_CLR =
IO_STATE(R_IRQ_MASK2_CLR, dma0_descr, clr) |
IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
IO_STATE(R_IRQ_MASK2_CLR, dma1_descr, clr) |
IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
/* Reset and wait for the DMA channels */
RESET_DMA(NETWORK_TX_DMA_NBR);
RESET_DMA(NETWORK_RX_DMA_NBR);
WAIT_DMA(NETWORK_TX_DMA_NBR);
WAIT_DMA(NETWORK_RX_DMA_NBR);
/* Initialise the etrax network controller */
/* allocate the irq corresponding to the receiving DMA */
if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt,
IRQF_SAMPLE_RANDOM, cardname, (void *)dev)) {
goto grace_exit0;
}
/* allocate the irq corresponding to the transmitting DMA */
if (request_irq(NETWORK_DMA_TX_IRQ_NBR, e100rxtx_interrupt, 0,
cardname, (void *)dev)) {
goto grace_exit1;
}
/* allocate the irq corresponding to the network errors etc */
if (request_irq(NETWORK_STATUS_IRQ_NBR, e100nw_interrupt, 0,
cardname, (void *)dev)) {
goto grace_exit2;
}
/* give the HW an idea of what MAC address we want */
*R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
(dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24);
*R_NETWORK_SA_1 = dev->dev_addr[4] | (dev->dev_addr[5] << 8);
*R_NETWORK_SA_2 = 0;
#if 0
/* use promiscuous mode for testing */
*R_NETWORK_GA_0 = 0xffffffff;
*R_NETWORK_GA_1 = 0xffffffff;
*R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */
#else
SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive);
SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable);
SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
#endif
*R_NETWORK_GEN_CONFIG =
IO_STATE(R_NETWORK_GEN_CONFIG, phy, mii_clk) |
IO_STATE(R_NETWORK_GEN_CONFIG, enable, on);
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, delay, none);
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, cancel, dont);
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, cd, enable);
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, retry, enable);
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, pad, enable);
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable);
*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
save_flags(flags);
cli();
/* enable the irq's for ethernet DMA */
*R_IRQ_MASK2_SET =
IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) |
IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set);
*R_IRQ_MASK0_SET =
IO_STATE(R_IRQ_MASK0_SET, overrun, set) |
IO_STATE(R_IRQ_MASK0_SET, underrun, set) |
IO_STATE(R_IRQ_MASK0_SET, excessive_col, set);
/* make sure the irqs are cleared */
*R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
*R_DMA_CH1_CLR_INTR = IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do);
/* make sure the rec and transmit error counters are cleared */
(void)*R_REC_COUNTERS; /* dummy read */
(void)*R_TR_COUNTERS; /* dummy read */
/* start the receiving DMA channel so we can receive packets from now on */
*R_DMA_CH1_FIRST = virt_to_phys(myNextRxDesc);
*R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, start);
/* Set up transmit DMA channel so it can be restarted later */
*R_DMA_CH0_FIRST = 0;
*R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
restore_flags(flags);
/* Probe for transceiver */
if (e100_probe_transceiver(dev))
goto grace_exit3;
/* Start duplex/speed timers */
add_timer(&speed_timer);
add_timer(&duplex_timer);
/* We are now ready to accept transmit requeusts from
* the queueing layer of the networking.
*/
netif_start_queue(dev);
return 0;
grace_exit3:
free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
grace_exit2:
free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
grace_exit1:
free_irq(NETWORK_DMA_RX_IRQ_NBR, (void *)dev);
grace_exit0:
return -EAGAIN;
}
static void
generic_check_speed(struct net_device* dev)
{
unsigned long data;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE);
if ((data & ADVERTISE_100FULL) ||
(data & ADVERTISE_100HALF))
current_speed = 100;
else
current_speed = 10;
}
static void
tdk_check_speed(struct net_device* dev)
{
unsigned long data;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG);
current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10);
}
static void
broadcom_check_speed(struct net_device* dev)
{
unsigned long data;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG);
current_speed = (data & MDIO_BC_SPEED ? 100 : 10);
}
static void
intel_check_speed(struct net_device* dev)
{
unsigned long data;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2);
current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
}
static void
e100_check_speed(unsigned long priv)
{
struct net_device* dev = (struct net_device*)priv;
static int led_initiated = 0;
unsigned long data;
int old_speed = current_speed;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR);
if (!(data & BMSR_LSTATUS)) {
current_speed = 0;
} else {
transceiver->check_speed(dev);
}
if ((old_speed != current_speed) || !led_initiated) {
led_initiated = 1;
e100_set_network_leds(NO_NETWORK_ACTIVITY);
}
/* Reinitialize the timer. */
speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
add_timer(&speed_timer);
}
static void
e100_negotiate(struct net_device* dev)
{
unsigned short data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE);
/* Discard old speed and duplex settings */
data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL |
ADVERTISE_10HALF | ADVERTISE_10FULL);
switch (current_speed_selection) {
case 10 :
if (current_duplex == full)
data |= ADVERTISE_10FULL;
else if (current_duplex == half)
data |= ADVERTISE_10HALF;
else
data |= ADVERTISE_10HALF | ADVERTISE_10FULL;
break;
case 100 :
if (current_duplex == full)
data |= ADVERTISE_100FULL;
else if (current_duplex == half)
data |= ADVERTISE_100HALF;
else
data |= ADVERTISE_100HALF | ADVERTISE_100FULL;
break;
case 0 : /* Auto */
if (current_duplex == full)
data |= ADVERTISE_100FULL | ADVERTISE_10FULL;
else if (current_duplex == half)
data |= ADVERTISE_100HALF | ADVERTISE_10HALF;
else
data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_100HALF | ADVERTISE_100FULL;
break;
default : /* assume autoneg speed and duplex */
data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_100HALF | ADVERTISE_100FULL;
}
e100_set_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE, data);
/* Renegotiate with link partner */
data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR);
data |= BMCR_ANENABLE | BMCR_ANRESTART;
e100_set_mdio_reg(dev, mdio_phy_addr, MII_BMCR, data);
}
static void
e100_set_speed(struct net_device* dev, unsigned long speed)
{
if (speed != current_speed_selection) {
current_speed_selection = speed;
e100_negotiate(dev);
}
}
static void
e100_check_duplex(unsigned long priv)
{
struct net_device *dev = (struct net_device *)priv;
struct net_local *np = (struct net_local *)dev->priv;
int old_duplex = full_duplex;
transceiver->check_duplex(dev);
if (old_duplex != full_duplex) {
/* Duplex changed */
SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
}
/* Reinitialize the timer. */
duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
add_timer(&duplex_timer);
np->mii_if.full_duplex = full_duplex;
}
static void
generic_check_duplex(struct net_device* dev)
{
unsigned long data;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE);
if ((data & ADVERTISE_10FULL) ||
(data & ADVERTISE_100FULL))
full_duplex = 1;
else
full_duplex = 0;
}
static void
tdk_check_duplex(struct net_device* dev)
{
unsigned long data;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG);
full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
}
static void
broadcom_check_duplex(struct net_device* dev)
{
unsigned long data;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG);
full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
}
static void
intel_check_duplex(struct net_device* dev)
{
unsigned long data;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2);
full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
}
static void
e100_set_duplex(struct net_device* dev, enum duplex new_duplex)
{
if (new_duplex != current_duplex) {
current_duplex = new_duplex;
e100_negotiate(dev);
}
}
static int
e100_probe_transceiver(struct net_device* dev)
{
unsigned int phyid_high;
unsigned int phyid_low;
unsigned int oui;
struct transceiver_ops* ops = NULL;
/* Probe MDIO physical address */
for (mdio_phy_addr = 0; mdio_phy_addr <= 31; mdio_phy_addr++) {
if (e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR) != 0xffff)
break;
}
if (mdio_phy_addr == 32)
return -ENODEV;
/* Get manufacturer */
phyid_high = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID1);
phyid_low = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID2);
oui = (phyid_high << 6) | (phyid_low >> 10);
for (ops = &transceivers[0]; ops->oui; ops++) {
if (ops->oui == oui)
break;
}
transceiver = ops;
return 0;
}
static int
e100_get_mdio_reg(struct net_device *dev, int phy_id, int location)
{
unsigned short cmd; /* Data to be sent on MDIO port */
int data; /* Data read from MDIO */
int bitCounter;
/* Start of frame, OP Code, Physical Address, Register Address */
cmd = (MDIO_START << 14) | (MDIO_READ << 12) | (phy_id << 7) |
(location << 2);
e100_send_mdio_cmd(cmd, 0);
data = 0;
/* Data... */
for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
data |= (e100_receive_mdio_bit() << bitCounter);
}
return data;
}
static void
e100_set_mdio_reg(struct net_device *dev, int phy_id, int location, int value)
{
int bitCounter;
unsigned short cmd;
cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (phy_id << 7) |
(location << 2);
e100_send_mdio_cmd(cmd, 1);
/* Data... */
for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
e100_send_mdio_bit(GET_BIT(bitCounter, value));
}
}
static void
e100_send_mdio_cmd(unsigned short cmd, int write_cmd)
{
int bitCounter;
unsigned char data = 0x2;
/* Preamble */
for (bitCounter = 31; bitCounter>= 0; bitCounter--)
e100_send_mdio_bit(GET_BIT(bitCounter, MDIO_PREAMBLE));
for (bitCounter = 15; bitCounter >= 2; bitCounter--)
e100_send_mdio_bit(GET_BIT(bitCounter, cmd));
/* Turnaround */
for (bitCounter = 1; bitCounter >= 0 ; bitCounter--)
if (write_cmd)
e100_send_mdio_bit(GET_BIT(bitCounter, data));
else
e100_receive_mdio_bit();
}
static void
e100_send_mdio_bit(unsigned char bit)
{
*R_NETWORK_MGM_CTRL =
IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable) |
IO_FIELD(R_NETWORK_MGM_CTRL, mdio, bit);
udelay(1);
*R_NETWORK_MGM_CTRL =
IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable) |
IO_MASK(R_NETWORK_MGM_CTRL, mdck) |
IO_FIELD(R_NETWORK_MGM_CTRL, mdio, bit);
udelay(1);
}
static unsigned char
e100_receive_mdio_bit()
{
unsigned char bit;
*R_NETWORK_MGM_CTRL = 0;
bit = IO_EXTRACT(R_NETWORK_STAT, mdio, *R_NETWORK_STAT);
udelay(1);
*R_NETWORK_MGM_CTRL = IO_MASK(R_NETWORK_MGM_CTRL, mdck);
udelay(1);
return bit;
}
static void
e100_reset_transceiver(struct net_device* dev)
{
unsigned short cmd;
unsigned short data;
int bitCounter;
data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR);
cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (mdio_phy_addr << 7) | (MII_BMCR << 2);
e100_send_mdio_cmd(cmd, 1);
data |= 0x8000;
for (bitCounter = 15; bitCounter >= 0 ; bitCounter--) {
e100_send_mdio_bit(GET_BIT(bitCounter, data));
}
}
/* Called by upper layers if they decide it took too long to complete
* sending a packet - we need to reset and stuff.
*/
static void
e100_tx_timeout(struct net_device *dev)
{
struct net_local *np = (struct net_local *)dev->priv;
unsigned long flags;
spin_lock_irqsave(&np->lock, flags);
printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
tx_done(dev) ? "IRQ problem" : "network cable problem");
/* remember we got an error */
np->stats.tx_errors++;
/* reset the TX DMA in case it has hung on something */
RESET_DMA(NETWORK_TX_DMA_NBR);
WAIT_DMA(NETWORK_TX_DMA_NBR);
/* Reset the transceiver. */
e100_reset_transceiver(dev);
/* and get rid of the packets that never got an interrupt */
while (myFirstTxDesc != myNextTxDesc)
{
dev_kfree_skb(myFirstTxDesc->skb);
myFirstTxDesc->skb = 0;
myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
}
/* Set up transmit DMA channel so it can be restarted later */
*R_DMA_CH0_FIRST = 0;
*R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
/* tell the upper layers we're ok again */
netif_wake_queue(dev);
spin_unlock_irqrestore(&np->lock, flags);
}
/* This will only be invoked if the driver is _not_ in XOFF state.
* What this means is that we need not check it, and that this
* invariant will hold if we make sure that the netif_*_queue()
* calls are done at the proper times.
*/
static int
e100_send_packet(struct sk_buff *skb, struct net_device *dev)
{
struct net_local *np = (struct net_local *)dev->priv;
unsigned char *buf = skb->data;
unsigned long flags;
#ifdef ETHDEBUG
printk("send packet len %d\n", length);
#endif
spin_lock_irqsave(&np->lock, flags); /* protect from tx_interrupt and ourself */
myNextTxDesc->skb = skb;
dev->trans_start = jiffies;
e100_hardware_send_packet(buf, skb->len);
myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next);
/* Stop queue if full */
if (myNextTxDesc == myFirstTxDesc) {
netif_stop_queue(dev);
}
spin_unlock_irqrestore(&np->lock, flags);
return 0;
}
/*
* The typical workload of the driver:
* Handle the network interface interrupts.
*/
static irqreturn_t
e100rxtx_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
struct net_local *np = (struct net_local *)dev->priv;
unsigned long irqbits = *R_IRQ_MASK2_RD;
/* Disable RX/TX IRQs to avoid reentrancy */
*R_IRQ_MASK2_CLR =
IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
/* Handle received packets */
if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) {
/* acknowledge the eop interrupt */
*R_DMA_CH1_CLR_INTR = IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do);
/* check if one or more complete packets were indeed received */
while ((*R_DMA_CH1_FIRST != virt_to_phys(myNextRxDesc)) &&
(myNextRxDesc != myLastRxDesc)) {
/* Take out the buffer and give it to the OS, then
* allocate a new buffer to put a packet in.
*/
e100_rx(dev);
((struct net_local *)dev->priv)->stats.rx_packets++;
/* restart/continue on the channel, for safety */
*R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart);
/* clear dma channel 1 eop/descr irq bits */
*R_DMA_CH1_CLR_INTR =
IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do) |
IO_STATE(R_DMA_CH1_CLR_INTR, clr_descr, do);
/* now, we might have gotten another packet
so we have to loop back and check if so */
}
}
/* Report any packets that have been sent */
while (myFirstTxDesc != phys_to_virt(*R_DMA_CH0_FIRST) &&
myFirstTxDesc != myNextTxDesc)
{
np->stats.tx_bytes += myFirstTxDesc->skb->len;
np->stats.tx_packets++;
/* dma is ready with the transmission of the data in tx_skb, so now
we can release the skb memory */
dev_kfree_skb_irq(myFirstTxDesc->skb);
myFirstTxDesc->skb = 0;
myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
}
if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) {
/* acknowledge the eop interrupt and wake up queue */
*R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
netif_wake_queue(dev);
}
/* Enable RX/TX IRQs again */
*R_IRQ_MASK2_SET =
IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) |
IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set);
return IRQ_HANDLED;
}
static irqreturn_t
e100nw_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
struct net_local *np = (struct net_local *)dev->priv;
unsigned long irqbits = *R_IRQ_MASK0_RD;
/* check for underrun irq */
if (irqbits & IO_STATE(R_IRQ_MASK0_RD, underrun, active)) {
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
np->stats.tx_errors++;
D(printk("ethernet receiver underrun!\n"));
}
/* check for overrun irq */
if (irqbits & IO_STATE(R_IRQ_MASK0_RD, overrun, active)) {
update_rx_stats(&np->stats); /* this will ack the irq */
D(printk("ethernet receiver overrun!\n"));
}
/* check for excessive collision irq */
if (irqbits & IO_STATE(R_IRQ_MASK0_RD, excessive_col, active)) {
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
*R_NETWORK_TR_CTRL = IO_STATE(R_NETWORK_TR_CTRL, clr_error, clr);
np->stats.tx_errors++;
D(printk("ethernet excessive collisions!\n"));
}
return IRQ_HANDLED;
}
/* We have a good packet(s), get it/them out of the buffers. */
static void
e100_rx(struct net_device *dev)
{
struct sk_buff *skb;
int length = 0;
struct net_local *np = (struct net_local *)dev->priv;
unsigned char *skb_data_ptr;
#ifdef ETHDEBUG
int i;
#endif
if (!led_active && time_after(jiffies, led_next_time)) {
/* light the network leds depending on the current speed. */
e100_set_network_leds(NETWORK_ACTIVITY);
/* Set the earliest time we may clear the LED */
led_next_time = jiffies + NET_FLASH_TIME;
led_active = 1;
mod_timer(&clear_led_timer, jiffies + HZ/10);
}
length = myNextRxDesc->descr.hw_len - 4;
((struct net_local *)dev->priv)->stats.rx_bytes += length;
#ifdef ETHDEBUG
printk("Got a packet of length %d:\n", length);
/* dump the first bytes in the packet */
skb_data_ptr = (unsigned char *)phys_to_virt(myNextRxDesc->descr.buf);
for (i = 0; i < 8; i++) {
printk("%d: %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x\n", i * 8,
skb_data_ptr[0],skb_data_ptr[1],skb_data_ptr[2],skb_data_ptr[3],
skb_data_ptr[4],skb_data_ptr[5],skb_data_ptr[6],skb_data_ptr[7]);
skb_data_ptr += 8;
}
#endif
if (length < RX_COPYBREAK) {
/* Small packet, copy data */
skb = dev_alloc_skb(length - ETHER_HEAD_LEN);
if (!skb) {
np->stats.rx_errors++;
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
return;
}
skb_put(skb, length - ETHER_HEAD_LEN); /* allocate room for the packet body */
skb_data_ptr = skb_push(skb, ETHER_HEAD_LEN); /* allocate room for the header */
#ifdef ETHDEBUG
printk("head = 0x%x, data = 0x%x, tail = 0x%x, end = 0x%x\n",
skb->head, skb->data, skb->tail, skb->end);
printk("copying packet to 0x%x.\n", skb_data_ptr);
#endif
memcpy(skb_data_ptr, phys_to_virt(myNextRxDesc->descr.buf), length);
}
else {
/* Large packet, send directly to upper layers and allocate new
* memory (aligned to cache line boundary to avoid bug).
* Before sending the skb to upper layers we must make sure that
* skb->data points to the aligned start of the packet.
*/
int align;
struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
if (!new_skb) {
np->stats.rx_errors++;
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
return;
}
skb = myNextRxDesc->skb;
align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data;
skb_put(skb, length + align);
skb_pull(skb, align); /* Remove alignment bytes */
myNextRxDesc->skb = new_skb;
myNextRxDesc->descr.buf = L1_CACHE_ALIGN(virt_to_phys(myNextRxDesc->skb->data));
}
skb->dev = dev;
skb->protocol = eth_type_trans(skb, dev);
/* Send the packet to the upper layers */
netif_rx(skb);
/* Prepare for next packet */
myNextRxDesc->descr.status = 0;
myPrevRxDesc = myNextRxDesc;
myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next);
rx_queue_len++;
/* Check if descriptors should be returned */
if (rx_queue_len == RX_QUEUE_THRESHOLD) {
flush_etrax_cache();
myPrevRxDesc->descr.ctrl |= d_eol;
myLastRxDesc->descr.ctrl &= ~d_eol;
myLastRxDesc = myPrevRxDesc;
rx_queue_len = 0;
}
}
/* The inverse routine to net_open(). */
static int
e100_close(struct net_device *dev)
{
struct net_local *np = (struct net_local *)dev->priv;
printk(KERN_INFO "Closing %s.\n", dev->name);
netif_stop_queue(dev);
*R_IRQ_MASK0_CLR =
IO_STATE(R_IRQ_MASK0_CLR, overrun, clr) |
IO_STATE(R_IRQ_MASK0_CLR, underrun, clr) |
IO_STATE(R_IRQ_MASK0_CLR, excessive_col, clr);
*R_IRQ_MASK2_CLR =
IO_STATE(R_IRQ_MASK2_CLR, dma0_descr, clr) |
IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
IO_STATE(R_IRQ_MASK2_CLR, dma1_descr, clr) |
IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
/* Stop the receiver and the transmitter */
RESET_DMA(NETWORK_TX_DMA_NBR);
RESET_DMA(NETWORK_RX_DMA_NBR);
/* Flush the Tx and disable Rx here. */
free_irq(NETWORK_DMA_RX_IRQ_NBR, (void *)dev);
free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
/* Update the statistics here. */
update_rx_stats(&np->stats);
update_tx_stats(&np->stats);
/* Stop speed/duplex timers */
del_timer(&speed_timer);
del_timer(&duplex_timer);
return 0;
}
static int
e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *data = if_mii(ifr);
struct net_local *np = netdev_priv(dev);
spin_lock(&np->lock); /* Preempt protection */
switch (cmd) {
case SIOCGMIIPHY: /* Get PHY address */
data->phy_id = mdio_phy_addr;
break;
case SIOCGMIIREG: /* Read MII register */
data->val_out = e100_get_mdio_reg(dev, mdio_phy_addr, data->reg_num);
break;
case SIOCSMIIREG: /* Write MII register */
e100_set_mdio_reg(dev, mdio_phy_addr, data->reg_num, data->val_in);
break;
/* The ioctls below should be considered obsolete but are */
/* still present for compatability with old scripts/apps */
case SET_ETH_SPEED_10: /* 10 Mbps */
e100_set_speed(dev, 10);
break;
case SET_ETH_SPEED_100: /* 100 Mbps */
e100_set_speed(dev, 100);
break;
case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */
e100_set_speed(dev, 0);
break;
case SET_ETH_DUPLEX_HALF: /* Half duplex. */
e100_set_duplex(dev, half);
break;
case SET_ETH_DUPLEX_FULL: /* Full duplex. */
e100_set_duplex(dev, full);
break;
case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex*/
e100_set_duplex(dev, autoneg);
break;
default:
return -EINVAL;
}
spin_unlock(&np->lock);
return 0;
}
static int e100_set_settings(struct net_device *dev,
struct ethtool_cmd *ecmd)
{
ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
ecmd->port = PORT_TP;
ecmd->transceiver = XCVR_EXTERNAL;
ecmd->phy_address = mdio_phy_addr;
ecmd->speed = current_speed;
ecmd->duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
ecmd->advertising = ADVERTISED_TP;
if (current_duplex == autoneg && current_speed_selection == 0)
ecmd->advertising |= ADVERTISED_Autoneg;
else {
ecmd->advertising |=
ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
if (current_speed_selection == 10)
ecmd->advertising &= ~(ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full);
else if (current_speed_selection == 100)
ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full);
if (current_duplex == half)
ecmd->advertising &= ~(ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Full);
else if (current_duplex == full)
ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
ADVERTISED_100baseT_Half);
}
ecmd->autoneg = AUTONEG_ENABLE;
return 0;
}
static int e100_set_settings(struct net_device *dev,
struct ethtool_cmd *ecmd)
{
if (ecmd->autoneg == AUTONEG_ENABLE) {
e100_set_duplex(dev, autoneg);
e100_set_speed(dev, 0);
} else {
e100_set_duplex(dev, ecmd->duplex == DUPLEX_HALF ? half : full);
e100_set_speed(dev, ecmd->speed == SPEED_10 ? 10: 100);
}
return 0;
}
static void e100_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
strncpy(info->driver, "ETRAX 100LX", sizeof(info->driver) - 1);
strncpy(info->version, "$Revision: 1.31 $", sizeof(info->version) - 1);
strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1);
strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1);
}
static int e100_nway_reset(struct net_device *dev)
{
if (current_duplex == autoneg && current_speed_selection == 0)
e100_negotiate(dev);
return 0;
}
static const struct ethtool_ops e100_ethtool_ops = {
.get_settings = e100_get_settings,
.set_settings = e100_set_settings,
.get_drvinfo = e100_get_drvinfo,
.nway_reset = e100_nway_reset,
.get_link = ethtool_op_get_link,
};
static int
e100_set_config(struct net_device *dev, struct ifmap *map)
{
struct net_local *np = (struct net_local *)dev->priv;
spin_lock(&np->lock); /* Preempt protection */
switch(map->port) {
case IF_PORT_UNKNOWN:
/* Use autoneg */
e100_set_speed(dev, 0);
e100_set_duplex(dev, autoneg);
break;
case IF_PORT_10BASET:
e100_set_speed(dev, 10);
e100_set_duplex(dev, autoneg);
break;
case IF_PORT_100BASET:
case IF_PORT_100BASETX:
e100_set_speed(dev, 100);
e100_set_duplex(dev, autoneg);
break;
case IF_PORT_100BASEFX:
case IF_PORT_10BASE2:
case IF_PORT_AUI:
spin_unlock(&np->lock);
return -EOPNOTSUPP;
break;
default:
printk(KERN_ERR "%s: Invalid media selected", dev->name);
spin_unlock(&np->lock);
return -EINVAL;
}
spin_unlock(&np->lock);
return 0;
}
static void
update_rx_stats(struct net_device_stats *es)
{
unsigned long r = *R_REC_COUNTERS;
/* update stats relevant to reception errors */
es->rx_fifo_errors += IO_EXTRACT(R_REC_COUNTERS, congestion, r);
es->rx_crc_errors += IO_EXTRACT(R_REC_COUNTERS, crc_error, r);
es->rx_frame_errors += IO_EXTRACT(R_REC_COUNTERS, alignment_error, r);
es->rx_length_errors += IO_EXTRACT(R_REC_COUNTERS, oversize, r);
}
static void
update_tx_stats(struct net_device_stats *es)
{
unsigned long r = *R_TR_COUNTERS;
/* update stats relevant to transmission errors */
es->collisions +=
IO_EXTRACT(R_TR_COUNTERS, single_col, r) +
IO_EXTRACT(R_TR_COUNTERS, multiple_col, r);
es->tx_errors += IO_EXTRACT(R_TR_COUNTERS, deferred, r);
}
/*
* Get the current statistics.
* This may be called with the card open or closed.
*/
static struct net_device_stats *
e100_get_stats(struct net_device *dev)
{
struct net_local *lp = (struct net_local *)dev->priv;
unsigned long flags;
spin_lock_irqsave(&lp->lock, flags);
update_rx_stats(&lp->stats);
update_tx_stats(&lp->stats);
spin_unlock_irqrestore(&lp->lock, flags);
return &lp->stats;
}
/*
* Set or clear the multicast filter for this adaptor.
* num_addrs == -1 Promiscuous mode, receive all packets
* num_addrs == 0 Normal mode, clear multicast list
* num_addrs > 0 Multicast mode, receive normal and MC packets,
* and do best-effort filtering.
*/
static void
set_multicast_list(struct net_device *dev)
{
struct net_local *lp = (struct net_local *)dev->priv;
int num_addr = dev->mc_count;
unsigned long int lo_bits;
unsigned long int hi_bits;
spin_lock(&lp->lock);
if (dev->flags & IFF_PROMISC)
{
/* promiscuous mode */
lo_bits = 0xfffffffful;
hi_bits = 0xfffffffful;
/* Enable individual receive */
SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, receive);
*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
} else if (dev->flags & IFF_ALLMULTI) {
/* enable all multicasts */
lo_bits = 0xfffffffful;
hi_bits = 0xfffffffful;
/* Disable individual receive */
SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
} else if (num_addr == 0) {
/* Normal, clear the mc list */
lo_bits = 0x00000000ul;
hi_bits = 0x00000000ul;
/* Disable individual receive */
SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
} else {
/* MC mode, receive normal and MC packets */
char hash_ix;
struct dev_mc_list *dmi = dev->mc_list;
int i;
char *baddr;
lo_bits = 0x00000000ul;
hi_bits = 0x00000000ul;
for (i=0; i<num_addr; i++) {
/* Calculate the hash index for the GA registers */
hash_ix = 0;
baddr = dmi->dmi_addr;
hash_ix ^= (*baddr) & 0x3f;
hash_ix ^= ((*baddr) >> 6) & 0x03;
++baddr;
hash_ix ^= ((*baddr) << 2) & 0x03c;
hash_ix ^= ((*baddr) >> 4) & 0xf;
++baddr;
hash_ix ^= ((*baddr) << 4) & 0x30;
hash_ix ^= ((*baddr) >> 2) & 0x3f;
++baddr;
hash_ix ^= (*baddr) & 0x3f;
hash_ix ^= ((*baddr) >> 6) & 0x03;
++baddr;
hash_ix ^= ((*baddr) << 2) & 0x03c;
hash_ix ^= ((*baddr) >> 4) & 0xf;
++baddr;
hash_ix ^= ((*baddr) << 4) & 0x30;
hash_ix ^= ((*baddr) >> 2) & 0x3f;
hash_ix &= 0x3f;
if (hash_ix >= 32) {
hi_bits |= (1 << (hash_ix-32));
}
else {
lo_bits |= (1 << hash_ix);
}
dmi = dmi->next;
}
/* Disable individual receive */
SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
}
*R_NETWORK_GA_0 = lo_bits;
*R_NETWORK_GA_1 = hi_bits;
spin_unlock(&lp->lock);
}
void
e100_hardware_send_packet(char *buf, int length)
{
D(printk("e100 send pack, buf 0x%x len %d\n", buf, length));
if (!led_active && time_after(jiffies, led_next_time)) {
/* light the network leds depending on the current speed. */
e100_set_network_leds(NETWORK_ACTIVITY);
/* Set the earliest time we may clear the LED */
led_next_time = jiffies + NET_FLASH_TIME;
led_active = 1;
mod_timer(&clear_led_timer, jiffies + HZ/10);
}
/* configure the tx dma descriptor */
myNextTxDesc->descr.sw_len = length;
myNextTxDesc->descr.ctrl = d_eop | d_eol | d_wait;
myNextTxDesc->descr.buf = virt_to_phys(buf);
/* Move end of list */
myLastTxDesc->descr.ctrl &= ~d_eol;
myLastTxDesc = myNextTxDesc;
/* Restart DMA channel */
*R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, restart);
}
static void
e100_clear_network_leds(unsigned long dummy)
{
if (led_active && time_after(jiffies, led_next_time)) {
e100_set_network_leds(NO_NETWORK_ACTIVITY);
/* Set the earliest time we may set the LED */
led_next_time = jiffies + NET_FLASH_PAUSE;
led_active = 0;
}
}
static void
e100_set_network_leds(int active)
{
#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK)
int light_leds = (active == NO_NETWORK_ACTIVITY);
#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY)
int light_leds = (active == NETWORK_ACTIVITY);
#else
#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY"
#endif
if (!current_speed) {
/* Make LED red, link is down */
#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION)
LED_NETWORK_SET(LED_RED);
#else
LED_NETWORK_SET(LED_OFF);
#endif
}
else if (light_leds) {
if (current_speed == 10) {
LED_NETWORK_SET(LED_ORANGE);
} else {
LED_NETWORK_SET(LED_GREEN);
}
}
else {
LED_NETWORK_SET(LED_OFF);
}
}
static int
etrax_init_module(void)
{
return etrax_ethernet_init();
}
static int __init
e100_boot_setup(char* str)
{
struct sockaddr sa = {0};
int i;
/* Parse the colon separated Ethernet station address */
for (i = 0; i < ETH_ALEN; i++) {
unsigned int tmp;
if (sscanf(str + 3*i, "%2x", &tmp) != 1) {
printk(KERN_WARNING "Malformed station address");
return 0;
}
sa.sa_data[i] = (char)tmp;
}
default_mac = sa;
return 1;
}
__setup("etrax100_eth=", e100_boot_setup);
module_init(etrax_init_module);
Reference in New Issue View Git Blame Copy Permalink